SPECpower_ssj2008 Copyright (C) 2007-2019 Standard Performance Evaluation Corporation Fujitsu FUJITSU Server PRIMERGY TX2550 M5 SPECpower_ssj2008 = 11,901 overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Kawasaki, Kanagawa, Japan Test Date: Jul 30, 2019 Publication: Sep 19, 2019 Hardware Availability: Jun-2019 Software Availability: Dec-2018 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.9% | 4,507,558 | 342 | 13,184 90% | 90.0% | 4,057,819 | 301 | 13,479 80% | 79.8% | 3,600,840 | 251 | 14,325 70% | 70.0% | 3,157,941 | 219 | 14,409 60% | 59.9% | 2,701,446 | 195 | 13,825 50% | 50.0% | 2,255,622 | 177 | 12,771 40% | 39.9% | 1,801,241 | 160 | 11,241 30% | 30.0% | 1,353,108 | 145 | 9,359 20% | 20.0% | 902,810 | 128 | 7,052 10% | 10.0% | 451,236 | 110 | 4,107 Active Idle | 0 | 54.8 | 0 sum of ssj_ops / sum of power = | 11,901 System Under Test Set: 'TX2550M5' Set Identifier: TX2550M5 Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node HARDWARE Hardware Vendor: Fujitsu Model: FUJITSU Server PRIMERGY TX2550 M5 Form Factor: Tower CPU Name: Intel Xeon Gold 6252 Processor CPU Characteristics: 24-Core, 2.10GHz, 35.75MB L3 Cache CPU Frequency (MHz): 2100 CPU(s) Enabled: 48 cores, 2 chips, 24 cores/chip Hardware Threads: 96 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 36608 KB I+D on chip per chip Other Cache: None Memory Amount (GB): 96 # and size of DIMM: 12 x 8192 MB Memory Details: 12 x 8 GB 2Rx8 PC4-2666V-R; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H, 1J, 1K, 1L, 1M populated Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: Fujitsu Technology Solutions S26113-F574-E13 Disk Drive: 1 x M.2 SSD 240GB, S26361-F5706-E240 Disk Controller: Integrated SATA Controller # and type of Network Interface 2 x Intel(R) I350 Gigabit Network Connection Cards (NICs) Installed: (onboard) NICs Enabled in Firmware / OS / 2/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): SUSE Linux Enterprise Server 12 SP4 OS Version: 4.12.14-94.41-default Filesystem: btrfs JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmn1300m -Xms1550m -Xmx1550m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=8 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+UseHugeTLBFS -XX:+UseTransparentHugePages JVM Affinity: chrt -r 1 taskset -c [(0,48),(1,49),(2,50),(3,51),(7,55),(8,56),( 9,57),(13,61),(14,62),(15,63),(19,67),(20,68 ),(4,52),(5,53),(6,54),(10,58),(11,59),(12,6 0),(16,64),(17,65),(18,66),(21,69),(22,70),( 23,71),(24,72),(25,73),(26,74),(27,75),(31,7 9),(32,80),(33,81),(37,85),(38,86),(39,87),( 43,91),(44,92),(28,76),(29,77),(30,78),(34,8 2),(35,83),(36,84),(40,88),(41,89),(42,90),( 45,93),(46,94),(47,95)] numactl --membind=[0-3] JVM Instances: 48 JVM Initial Heap (MB): 1550 JVM Maximum Heap (MB): 1550 JVM Address Bits: 64 Boot Firmware Version: R1.11.0 Management Firmware Version: 2.43P Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: None Boot Firmware Settings * Set "ASPM Support = Auto" in BIOS. * Set "SATA Controller = Disabled" in BIOS. * Set "Serial Port = Disabled" in BIOS. * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Line Prefetch = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "Intel Virtualization Technology = Disabled" in BIOS. * Set "Turbo Mode = Disabled" in BIOS. * Set "Override OS Energy Performance = Enabled" in BIOS. * Set "Energy Performance = Energy Efficient" in BIOS. * Set "DDR Performance = Energy optimized" in BIOS.(effective memory frequency = 1866 MHz) * Set "Autonomous C-state Support = Enabled" in BIOS. * Set "UPI Link Frequency Select = 9.6GT/s" in BIOS. * Set "Uncore Frequency Override = Nominal" in BIOS. * Set "IMC Interleaving = 1-way" in BIOS. Management Firmware Settings None System Under Test Notes * Storage drive bays type:8 x 3.5-inch hotplug SAS/SATA * kernal parameter:pcie_aspm=force pcie_aspm.policy=powersave intel_pstate=disable rcu_nocbs=1-95 nohz_full=1-95 isolcpus=1-95 * Benchmark started via ssh * modprobe cpufreq_conservative * cpupower frequency-set --governor conservative * echo -n 94 > /sys/devices/system/cpu/cpufreq/conservative/up_threshold * echo -n 1 > /sys/devices/system/cpu/cpufreq/conservative/freq_step * echo -n 1000000 > /sys/devices/system/cpu/cpufreq/conservative/sampling_rate * echo -n 0 >/sys/devices/system/cpu/cpufreq/conservative/ignore_nice_load * sysctl -w kernel.sched_migration_cost_ns=6000 * echo -n 93 > /sys/devices/system/cpu/cpufreq/conservative/down_threshold * echo -n 1 > /sys/devices/system/cpu/cpufreq/conservative/sampling_down_factor * sysctl -w kernel.sched_min_granularity_ns=10000000 * echo always > /sys/kernel/mm/transparent_hugepage/enabled * powertop --auto-tune * echo 0 > /proc/sys/kernel/nmi_watchdog * sysctl -w vm.swappiness=50 * sysctl -w vm.laptop_mode=5 * <Yes>: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * <Yes>: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * <Yes>: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX2530 M2 CPU Description: Intel Xeon E5-2643 v4 Memory amount (GB): 64 SOFTWARE Operating System (OS): Microsoft Windows Server 2012 R2 Standard JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Hioki Model: Hioki3336 Serial Number: 170130930 Connectivity: RS-232 Input Connection: Default Metrology Institute: NICT (National Institute of Information and Communications Technology) Accredited by: HIOKI E.E. CORPORATION. Calibration Label: H06400086-1901 Date of Calibration: 30-Jan-2019 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: Connected to PSU 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes * SPECpower_ssj.props input.load_level.number_warehouses set to 96 due to a known inconsistency in processor reporting with this Java version. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 342 | 20.9 90% | 301 | 20.9 80% | 251 | 21.1 70% | 219 | 21.1 60% | 195 | 21.1 50% | 177 | 21.1 40% | 160 | 21.1 30% | 145 | 21.1 20% | 128 | 21.1 10% | 110 | 21.1 Active Idle | 54.8 | 21.0 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 200V / 50 Hz / 1 phase / | 20.9 | 11 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20190730-00995-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 4,202,546 Calibration 2 | | | 4,505,590 Calibration 3 | | | 4,515,061 ssj_ops@calibrated=4,510,325 100% | 99.9% | 4,510,325 | 4,507,558 90% | 90.0% | 4,059,293 | 4,057,819 80% | 79.8% | 3,608,260 | 3,600,840 70% | 70.0% | 3,157,228 | 3,157,941 60% | 59.9% | 2,706,195 | 2,701,446 50% | 50.0% | 2,255,163 | 2,255,622 40% | 39.9% | 1,804,130 | 1,801,241 30% | 30.0% | 1,353,098 | 1,353,108 20% | 20.0% | 902,065 | 902,810 10% | 10.0% | 451,033 | 451,236 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20190730-00995.sles12sp4.txt) for additional details. Copyright (C) 2007-2019 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]