Hewlett Packard Enterprise ProLiant DL325 Gen10 | SPECpower_ssj2008 = 16,226 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Jul 30, 2019 |
Hardware Availability: | Aug-2019 | Software Availability: | Jun-2019 | Publication: | Aug 14, 2019 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.5% | 5,530,830 | 231 | 23,926 |
90% | 90.0% | 5,002,989 | 222 | 22,568 |
80% | 80.1% | 4,448,371 | 212 | 21,015 |
70% | 70.0% | 3,889,198 | 203 | 19,195 |
60% | 60.0% | 3,331,500 | 194 | 17,210 |
50% | 50.0% | 2,779,867 | 183 | 15,218 |
40% | 39.9% | 2,218,445 | 168 | 13,169 |
30% | 30.1% | 1,670,693 | 149 | 11,205 |
20% | 20.0% | 1,109,230 | 129 | 8,609 |
10% | 10.0% | 557,513 | 113 | 4,943 |
Active Idle | 0 | 79.5 | 0 | |
∑ssj_ops / ∑power = | 16,226 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL325 Gen10 |
Form Factor: | 1U |
CPU Name: | AMD EPYC 7702P 2.00 GHz |
CPU Characteristics: | 64-Core, 2.0GHz 256MB L3 Cache |
CPU Frequency (MHz): | 2000 |
CPU(s) Enabled: | 64 cores, 1 chip, 64 cores/chip |
Hardware Threads: | 128 (2 / core) |
CPU(s) Orderable: | 1 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 512 KB I+D on chip per core |
Tertiary Cache: | 256 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 128 |
# and size of DIMM: | 8 x 16384 MB |
Memory Details: | 16GB 2Rx8 PC4-2933Y; slots 1, 3, 5, 7, 10, 12, 14 and 16 populated |
Power Supply Quantity and Rating (W): | 1 x 800 |
Power Supply Details: | 1 x HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) |
Disk Drive: | 1 x HPE 480GB SATA 6G SSD (P05976-B21) |
Disk Controller: | Embedded SATA Controller |
# and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 4-port 331i Adapter |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Windows Server 2019 Datacenter |
OS Version: | Version 1809 (OS Build 17763.557) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | OpenJDK 64-Bit Server VM (build 12.0.1+12, mixed mode, sharing), openjdk version "12.0.1" 2019-04-16 |
JVM Command-line Options: | -server -XX:InlineSmallCode=4000 -XX:FreqInlineSize=3000 -XX:+UseLargePages -XX:+UseBiasedLocking -XX:ParallelGCThreads=4 -XX:+UseParallelOldGC -XX:+UseAdaptiveSizePolicy -Xmx2048m -Xms2048m -Xmn1800m -XX:SurvivorRatio=15 -XX:+UseParallelOldGC -XX:+OptimizeStringConcat -XX:AllocatePrefetchLines=7 -XX:MaxInlineSize=300 -XX:LoopUnrollLimit=30 -XX:AllocatePrefetchDistance=192 -XX:InitialTenuringThreshold=10 -XX:UseAVX=0 |
JVM Affinity: | start /NODE [0-15] /AFFINITY [0xF, 0xF0] |
JVM Instances: | 32 |
JVM Initial Heap (MB): | 2048 |
JVM Maximum Heap (MB): | 2048 |
JVM Address Bits: | 64 |
Boot Firmware Version: | A41 v2.00 (07/15/2019) |
Management Firmware Version: | 1.43 pass 18 May 23 2019 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | Microsoft KB4504369, KB4503327, KB900088 |
Hardware | |
---|---|
Hardware Vendor: | Hewlett-Packard Company |
Model: | ProLiant DL360p Gen8 |
CPU Description: | Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2012 R2 Standard |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_131-b11 |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT210 |
Serial Number: | 91GB47167 |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-E553M-40-1 |
Date of Calibration: | 21-Jun-2019 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.9.0-ee285d08-20190201 |
Setup Description: | SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 231 | 31.4 |
90% | 222 | 31.9 |
80% | 212 | 32.0 |
70% | 203 | 31.9 |
60% | 194 | 31.9 |
50% | 183 | 31.9 |
40% | 168 | 31.9 |
30% | 149 | 31.8 |
20% | 129 | 31.6 |
10% | 113 | 31.2 |
Active Idle | 79.5 | 30.6 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 30.6 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 5,552,868 | ||
Calibration 2 | 5,554,396 | ||
Calibration 3 | 5,557,920 | ||
ssj_ops@calibrated=5,556,158 | |||
100% | 99.5% | 5,556,158 | 5,530,830 |
90% | 90.0% | 5,000,542 | 5,002,989 |
80% | 80.1% | 4,444,927 | 4,448,371 |
70% | 70.0% | 3,889,311 | 3,889,198 |
60% | 60.0% | 3,333,695 | 3,331,500 |
50% | 50.0% | 2,778,079 | 2,779,867 |
40% | 39.9% | 2,222,463 | 2,218,445 |
30% | 30.1% | 1,666,847 | 1,670,693 |
20% | 20.0% | 1,111,232 | 1,109,230 |
10% | 10.0% | 555,616 | 557,513 |
Active Idle | 0 | 0 |