Hewlett Packard Enterprise ProLiant DL385 Gen10 | SPECpower_ssj2008 = 18,051 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Jul 16, 2019 |
Hardware Availability: | Aug-2019 | Software Availability: | Jun-2019 | Publication: | Aug 7, 2019 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.5% | 10,661,631 | 422 | 25,277 |
90% | 90.0% | 9,645,546 | 401 | 24,055 |
80% | 80.0% | 8,566,427 | 378 | 22,650 |
70% | 70.0% | 7,497,889 | 357 | 21,027 |
60% | 60.0% | 6,422,172 | 335 | 19,183 |
50% | 50.0% | 5,358,745 | 311 | 17,230 |
40% | 39.9% | 4,277,090 | 280 | 15,276 |
30% | 30.0% | 3,213,458 | 248 | 12,958 |
20% | 20.0% | 2,146,139 | 221 | 9,694 |
10% | 10.0% | 1,068,119 | 197 | 5,420 |
Active Idle | 0 | 111 | 0 | |
∑ssj_ops / ∑power = | 18,051 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL385 Gen10 |
Form Factor: | 2U |
CPU Name: | AMD EPYC 7702 2.0 GHz |
CPU Characteristics: | 64-Core, 2.0GHz 256MB L3 Cache |
CPU Frequency (MHz): | 2000 |
CPU(s) Enabled: | 128 cores, 2 chips, 64 cores/chip |
Hardware Threads: | 256 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 512 KB I+D on chip per core |
Tertiary Cache: | 256 MB I+D on chip per core |
Other Cache: | None |
Memory Amount (GB): | 256 |
# and size of DIMM: | 16 x 16384 MB |
Memory Details: | 16GB 2Rx8 PC4-2933Y-R slots 1, 3, 5, 7, 10, 12, 14 & 16 on each socket |
Power Supply Quantity and Rating (W): | 1 x 800 |
Power Supply Details: | HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) |
Disk Drive: | 1 x HPE 240GB SATA 6G Mixed Use M.2 2280 SSD (875488-B21) |
Disk Controller: | Embedded SATA Controller |
# and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 4-port 331i Adapter |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | 1 x HPE High Performance Fan Kit (867810-B21), 1 x HPE High Performance Heatsink Kit (882098-B21) |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Windows Server 2019 Datacenter |
OS Version: | Version 1809 (OS Build 17763.557) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 12.0.1+12, mixed mode), version 12.0.1 |
JVM Command-line Options: | -server -Xmx3740m -Xms3740m -Xmn3000m -XX:SurvivorRatio=15 -XX:InlineSmallCode=4000 -XX:FreqInlineSize=3000 -XX:+UseLargePages -XX:+UseBiasedLocking -XX:ParallelGCThreads=4 -XX:+UseParallelOldGC -XX:+OptimizeStringConcat -XX:AllocatePrefetchLines=7 -XX:MaxInlineSize=300 -XX:LoopUnrollLimit=30 -XX:AllocatePrefetchDistance=192 -XX:InitialTenuringThreshold=10 |
JVM Affinity: | start /NODE[0-31] /AFFINITY [0xF, 0xF0] |
JVM Instances: | 64 |
JVM Initial Heap (MB): | 3740 |
JVM Maximum Heap (MB): | 3740 |
JVM Address Bits: | 64 |
Boot Firmware Version: | A40 v2.00 (07/15/2019) |
Management Firmware Version: | 1.43 May 23 2019 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | Microsoft KB4504369, KB4503327, KB900088 |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen9 |
CPU Description: | 2x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 256 |
Software | |
---|---|
Operating System (OS): | Windows Server 2012 R2 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_181-b13 (build 25.181-b13, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT210 |
Serial Number: | 91GC21887 |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-E62NT-80-1 |
Date of Calibration: | 11-Jun-2019 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.9.0-ee285d08-20190201 |
Setup Description: | SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 422 | 22.9 |
90% | 401 | 22.9 |
80% | 378 | 22.6 |
70% | 357 | 22.4 |
60% | 335 | 22.3 |
50% | 311 | 22.2 |
40% | 280 | 22.2 |
30% | 248 | 22.2 |
20% | 221 | 22.1 |
10% | 197 | 22.2 |
Active Idle | 111 | 22.1 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 22.1 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 10,682,420 | ||
Calibration 2 | 10,708,631 | ||
Calibration 3 | 10,714,094 | ||
ssj_ops@calibrated=10,711,363 | |||
100% | 99.5% | 10,711,363 | 10,661,631 |
90% | 90.0% | 9,640,227 | 9,645,546 |
80% | 80.0% | 8,569,090 | 8,566,427 |
70% | 70.0% | 7,497,954 | 7,497,889 |
60% | 60.0% | 6,426,818 | 6,422,172 |
50% | 50.0% | 5,355,681 | 5,358,745 |
40% | 39.9% | 4,284,545 | 4,277,090 |
30% | 30.0% | 3,213,409 | 3,213,458 |
20% | 20.0% | 2,142,273 | 2,146,139 |
10% | 10.0% | 1,071,136 | 1,068,119 |
Active Idle | 0 | 0 |