SPECpower_ssj2008 Copyright (C) 2007-2019 Standard Performance Evaluation Corporation Fujitsu FUJITSU Server PRIMERGY RX4770 M5 SPECpower_ssj2008 = 12,979 overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Kawasaki, Kanagawa, Japan Test Date: Apr 24, 2019 Publication: Jun 5, 2019 Hardware Availability: Jun-2019 Software Availability: Dec-2018 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.8% | 11,162,949 | 808 | 13,815 90% | 90.1% | 10,076,651 | 668 | 15,088 80% | 79.9% | 8,941,321 | 581 | 15,393 70% | 70.0% | 7,832,822 | 512 | 15,298 60% | 60.1% | 6,723,475 | 453 | 14,849 50% | 50.0% | 5,596,891 | 402 | 13,915 40% | 40.0% | 4,474,650 | 359 | 12,459 30% | 30.0% | 3,358,285 | 320 | 10,491 20% | 20.0% | 2,238,257 | 280 | 7,981 10% | 10.0% | 1,122,533 | 237 | 4,732 Active Idle | 0 | 120 | 0 sum of ssj_ops / sum of power = | 12,979 System Under Test Set: 'RX4770M5' Set Identifier: RX4770M5 Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node HARDWARE Hardware Vendor: Fujitsu Model: FUJITSU Server PRIMERGY RX4770 M5 Form Factor: 2U CPU Name: Intel Xeon Platinum 8280L CPU Characteristics: 28-Core, 2.70GHz, 38.5MB L3 Cache CPU Frequency (MHz): 2700 CPU(s) Enabled: 112 cores, 4 chips, 28 cores/chip Hardware Threads: 224 (2 / core) CPU(s) Orderable: 4 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 39424 KB I+D on chip per chip Other Cache: None Memory Amount (GB): 384 # and size of DIMM: 24 x 16384 MB Memory Details: 24 x 16 GB 2Rx8 PC4-2933Y-R; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H, 1J, 1K, 1L, 1M, 1N, 1P, 1Q, 1R, 1S, 1T, 1U, 1V, 1W, 1X, 1Y, 1Z populated Power Supply Quantity and Rating 1 x 1600 (W): Power Supply Details: Standard power supply part of base unit S26361-K1657-V300 Disk Drive: 1 x SSD M.2 240GB, S26361-F5706-E240 Disk Controller: Integrated SATA Controller # and type of Network Interface 1 x PLAN EM 4 x 1Gb T OCP(Dynamic LOM), Cards (NICs) Installed: S26361-F3953-E401 NICs Enabled in Firmware / OS / 4/4/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): SUSE Linux Enterprise Server 12 SP4 OS Version: 4.12.14-94.41-default Filesystem: xfs JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmn1700m -Xms1950m -Xmx1950m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=8 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+UseHugeTLBFS -XX:+UseTransparentHugePages -XX:UseAVX=0 JVM Affinity: chrt -r 1 taskset -c [(0,112),(1,113),(2,114),(3,115),(7,119),(8, 120),(9,121),(14,126),(15,127),(16,128),(17, 129),(21,133),(22,134),(23,135),(4,116),(5,1 17),(6,118),(10,122),(11,123),(12,124),(13,1 25),(18,130),(19,131),(20,132),(24,136),(25, 137),(26,138),(27,139),(28,140),(29,141),(30 ,142),(31,143),(35,147),(36,148),(37,149),(4 2,154),(43,155),(44,156),(45,157),(49,161),( 50,162),(51,163),(32,144),(33,145),(34,146), (38,150),(39,151),(40,152),(41,153),(46,158) ,(47,159),(48,160),(52,164),(53,165),(54,166 ),(55,167),(56,168),(57,169),(58,170),(59,17 1),(63,175),(64,176),(65,177),(70,182),(71,1 83),(72,184),(73,185),(77,189),(78,190),(79, 191),(60,172),(61,173),(62,174),(66,178),(67 ,179),(68,180),(69,181),(74,186),(75,187),(7 6,188),(80,192),(81,193),(82,194),(83,195),( 84,196),(85,197),(86,198),(87,199),(91,203), (92,204),(93,205),(98,210),(99,211),(100,212 ),(101,213),(105,217),(106,218),(107,219),(8 8,200),(89,201),(90,202),(94,206),(95,207),( 96,208),(97,209),(102,214),(103,215),(104,21 6),(108,220),(109,221),(110,222),(111,223)] numactl --membind=[0-7] JVM Instances: 112 JVM Initial Heap (MB): 1950 JVM Maximum Heap (MB): 1950 JVM Address Bits: 64 Boot Firmware Version: R1.8.0 Management Firmware Version: 2.20c Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: None Boot Firmware Settings * Set "SATA Controller = Disabled" in BIOS. * Set "Serial Port = Disabled" in BIOS. * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Line Prefetch = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "Intel Virtualization Technology = Disabled" in BIOS. * Set "Turbo Mode = Disabled" in BIOS. * Set "Override OS Energy Performance = Enabled" in BIOS. * Set "Energy Performance = Energy Efficient" in BIOS. * Set "DDR Performance = Power balanced" in BIOS.(effective memory frequency = 2666 MHz) * Set "Autonomous C-state Support = Enabled" in BIOS. * Set "ASPM Support = Force L0s" in BIOS. * Set "UPI Link Frequency Select = 9.6GT/s" in BIOS. * Set "Uncore Frequency Override = Power balanced" in BIOS. * Set "IMC Interleaving = 1-way" in BIOS. * Set "HWPM = Native Mode" in BIOS * Set "USB Port Control = Enable internal ports only" in BIOS. * Set "Network Stack = Disabled" in BIOS. * Set "Link L0p Enable = Enabled" in BIOS. * Set "Link L1 Enable = Enabled" in BIOS. Management Firmware Settings None System Under Test Notes * kernal parameter:pcie_aspm=force pcie_aspm.policy=powersave intel_pstate=disable rcu_nocbs=1-223 nohz_full=1-223 isolcpus=1-223 * Benchmark started via ssh * modprobe cpufreq_conservative * cpupower frequency-set --governor conservative * echo -n 98 > /sys/devices/system/cpu/cpufreq/conservative/up_threshold * echo -n 1 > /sys/devices/system/cpu/cpufreq/conservative/freq_step * echo -n 1000000 > /sys/devices/system/cpu/cpufreq/conservative/sampling_rate * echo -n 0 >/sys/devices/system/cpu/cpufreq/conservative/ignore_nice_load * sysctl -w kernel.sched_migration_cost_ns=6000 * echo -n 97 > /sys/devices/system/cpu/cpufreq/conservative/down_threshold * echo -n 1 > /sys/devices/system/cpu/cpufreq/conservative/sampling_down_factor * sysctl -w kernel.sched_min_granularity_ns=10000000 * echo always > /sys/kernel/mm/transparent_hugepage/enabled * powertop --auto-tune * echo 0 > /proc/sys/kernel/nmi_watchdog * cpupower frequency-set -u 2400MHz * sysctl -w vm.swappiness=50 * sysctl -w vm.laptop_mode=5 * <Yes>: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * <Yes>: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * <Yes>: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX2530 M2 CPU Description: 2x Intel Xeon E5-2643 v4 Memory amount (GB): 64 SOFTWARE Operating System (OS): Microsoft Windows Server 2012 R2 Standard JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Hioki Model: Hioki3336 Serial Number: 170130930 Connectivity: RS-232 Input Connection: Default Metrology Institute: NICT (National Institute of Information and Communications Technology) Accredited by: HIOKI E.E. CORPORATION Calibration Label: H06400086-1901 Date of Calibration: 30-Jan-2019 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: Connected to PSU 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes * SPECpower_ssj.props input.load_level.number_warehouses set to 224 due to a known inconsistency in processor reporting with this Java version. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 808 | 21.6 90% | 668 | 21.6 80% | 581 | 21.6 70% | 512 | 21.6 60% | 453 | 21.5 50% | 402 | 21.5 40% | 359 | 21.5 30% | 320 | 21.4 20% | 280 | 21.4 10% | 237 | 21.4 Active Idle | 120 | 21.4 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 200V / 50 Hz / 1 phase / | 21.4 | 11 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20190423-00959-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 10,546,323 Calibration 2 | | | 11,182,011 Calibration 3 | | | 11,195,169 ssj_ops@calibrated=11,188,590 100% | 99.8% | 11,188,590 | 11,162,949 90% | 90.1% | 10,069,731 | 10,076,651 80% | 79.9% | 8,950,872 | 8,941,321 70% | 70.0% | 7,832,013 | 7,832,822 60% | 60.1% | 6,713,154 | 6,723,475 50% | 50.0% | 5,594,295 | 5,596,891 40% | 40.0% | 4,475,436 | 4,474,650 30% | 30.0% | 3,356,577 | 3,358,285 20% | 20.0% | 2,237,718 | 2,238,257 10% | 10.0% | 1,118,859 | 1,122,533 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20190423-00959.linux-yrty.txt) for additional details. Copyright (C) 2007-2019 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]