SPECpower_ssj2008 Copyright (C) 2007-2019 Standard Performance Evaluation Corporation Hewlett Packard Enterprise Synergy 480 Gen10 Compute Module SPECpower_ssj2008 = 10,825 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: Mar 12, 2019 Publication: Apr 2, 2019 Hardware Availability: Apr-2019 Software Availability: Mar-2019 Test Method: Multi Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.7% | 47,287,215 | 3,958 | 11,947 90% | 90.0% | 42,695,792 | 3,588 | 11,899 80% | 80.0% | 37,961,133 | 3,130 | 12,129 70% | 70.0% | 33,186,535 | 2,664 | 12,457 60% | 60.0% | 28,441,805 | 2,339 | 12,162 50% | 50.0% | 23,711,234 | 2,053 | 11,551 40% | 40.0% | 18,956,875 | 1,789 | 10,599 30% | 30.0% | 14,227,491 | 1,541 | 9,233 20% | 20.0% | 9,487,011 | 1,314 | 7,219 10% | 10.0% | 4,743,650 | 1,110 | 4,273 Active Idle | 0 | 598 | 0 sum of ssj_ops / sum of power = | 10,825 Aggregate SUT Data # of Nodes | # of Chips | # of Cores | # of | Total RAM | # of OS Images | # of JVM | | | Threads | (GB) | | Instances ---------- | ---------- | ---------- | ---------- | ---------- | -------------- | --------- 8 | 16 | 448 | 896 | 1,536 | 8 | 32 System Under Test Shared Hardware SHARED HARDWARE Enclosure: HPE Synergy 12000 Frame Form Factor: 10U Power Supply Quantity and Rating 4 x 2650 (W): Power Supply Details: HPE 2650W Performance Hot Plug Titanium Plus Power Supply Kit (798095-B21) Network Switch: 1 x HP A5820X Series Switch (JG219A) Network Switch Details: 10 Gb Fibre 24 ports KVM Switch: None KVM Switch Details: N/A Other Hardware: 1 x HPE Synergy 10/40Gb Pass Thru Module (799330-B21), 1 x Synergy Composer (804353-B21), 1 x Synergy Frame Link Module (804942-B21) Comment: Network switch not measured for power Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 8 Comment: SUT HARDWARE PER NODE Hardware Vendor: Hewlett Packard Enterprise Model: Synergy 480 Gen10 Compute Module Form Factor: blade CPU Name: Intel Xeon Platinum 8280 @ 2.70GHz CPU Characteristics: 28-Core, 2.70 GHz, 38.5MB L3 Cache CPU Frequency (MHz): 2700 CPU(s) Enabled: 56 cores, 2 chips, 28 cores/chip Hardware Threads: 112 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 39424 KB I+D on chip per chip Other Cache: None Memory Amount (GB): 192 # and size of DIMM: 12 x 16384 MB Memory Details: 12 x 16GB 2Rx8 PC4-2933Y-R; slots 1, 3, 5, 8, 10 and 12 populated on each socket Power Supply Quantity and Rating None (W): Power Supply Details: N/A Disk Drive: 1 x HPE 480GB SATA 6G M.2 2280 (875498-B21) Disk Controller: HPE Smart Array S100i SR Gen10 # and type of Network Interface 1 x HPE Synergy 3820C 10/20Gb CNA Cards (NICs) Installed: NICs Enabled in Firmware / OS / 2/2/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE PER NODE Power Management: Enabled (see SUT Notes) Operating System (OS): SUSE Linux Enterprise Server 12 SP4 OS Version: 4.12.14-94.41-default Filesystem: xfs JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmn19g -Xms21g -Xmx21g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=384 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=37 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=28 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC JVM Affinity: numactl --cpunodebind=[0-3] --localalloc JVM Instances: 4 JVM Initial Heap (MB): 21000 JVM Maximum Heap (MB): 21000 JVM Address Bits: 64 Boot Firmware Version: I42 v2.00 (02/02/2019) Management Firmware Version: 1.40 Feb 05 2019 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: HPE Service Pack for ProLiant (SPP) - Version 2019.03.0 (Mar 2019) Boot Firmware Settings Serial Port Options: * Embedded Serial Port: Disabled * Virtual Serial Port: Disabled * BIOS Serial Console Port: DisabledUSB Options * USB Support: All USB Ports Disabled * USB Boot Support: Disabled * Internal SD Card Slot: DisabledProcessor Options * x2APIC: Disabled Memory Options * Memory Bus Frequency: 2400 MHz * Memory Patrol Scrubbing: DisabledVirtualization Options * SR-IOV: Disabled * VT-D: Disabled * VT-x: DisabledEmbedded SATA Configuration * Smart Array SW RAID SupportPower and Performance Options * Power Regulator: Dynamic Power Savings Mode (default) * Intel Turbo Boost Technology: Disabled * Energy Efficient Turbo: Disabled (default: Enabled if Turbo Enabled) * Energy Performance Bias: Power Savings Mode (default: Balanced Performance) * Collaborative Power Control: Disabled (default: Enabled) * Intel DMI Link Frequency: Gen 1 Speed * NUMA Group Size Optimization: Clustered * Sub-NUMA Clustering: EnabledProcessor Prefetcher Options * HW Prefetcher: Disabled * Adjacent Sector Prefetch: Disabled * DCU Stream Prefetcher: Disabled * XPT Prefetcher: EnabledI/O options * Intel NIC DMA Channels (IOAT): DisabledIntel UPI Options * Intel UPI Link Frequency: Min UPI SpeedPCIe Device Configuration -> Advanced PCIe Configuration * HPE Synergy 3820C 10/20Gb CNA: PCIe Generation 1Advanced Service Options * AHS PCI Logging Level: Minimal Logging Management Firmware Settings See SUT Notes System Under Test Notes Benchmark started via SSH SPECpower_ssj.props input.load_level.number_warehouses set to 112 to detect the full number of available processors on the SUT OS tunings * systemctl stop irqbalance.service * echo 970000 > /proc/sys/kernel/sched_rt_runtime_us * echo 40000000 > /proc/sys/kernel/sched_latency_ns * echo 15000 > /proc/sys/vm/dirty_expire_centisecs * echo 64 > /proc/sys/kernel/sched_nr_migrateApplied protection against speculative execution * N/A: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2018-3640 (Variant 3a) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2018-3639 (Variant 4) is mitigated in the system as tested and documented. Controller System HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360 Gen9 CPU Description: 2 x Intel Xeon E5-2660 v3 Memory amount (GB): 128 SOFTWARE Operating System (OS): Microsoft Windows Server 2012 R2 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_144-b01 (build 25.144-b01, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GB53024 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-EM5Y4-80-1 Date of Calibration: 21-Jun-2018 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: SUT Power Supply 5 POWER ANALYZER PWR2 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GB47168 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-EM5Y4-60-1 Date of Calibration: 21-Jun-2018 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: SUT Power Supply 3 POWER ANALYZER PWR3 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GC21887 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-EM5Y4-20-1 Date of Calibration: 21-Jun-2018 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: SUT Power Supplies 1 and 2 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 3,958 | 23.7 90% | 3,588 | 23.8 80% | 3,130 | 23.8 70% | 2,664 | 23.8 60% | 2,339 | 23.7 50% | 2,053 | 23.7 40% | 1,789 | 23.7 30% | 1,541 | 23.7 20% | 1,314 | 23.5 10% | 1,110 | 23.6 Active Idle | 598 | 23.5 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 220V / 60 Hz / 1 phase / | 23.5 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20190312-00911-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 47,491,815 Calibration 2 | | | 47,407,273 Calibration 3 | | | 47,443,600 ssj_ops@calibrated=47,425,437 100% | 99.7% | 47,425,437 | 47,287,215 90% | 90.0% | 42,682,893 | 42,695,792 80% | 80.0% | 37,940,349 | 37,961,133 70% | 70.0% | 33,197,806 | 33,186,535 60% | 60.0% | 28,455,262 | 28,441,805 50% | 50.0% | 23,712,718 | 23,711,234 40% | 40.0% | 18,970,175 | 18,956,875 30% | 30.0% | 14,227,631 | 14,227,491 20% | 20.0% | 9,485,087 | 9,487,011 10% | 10.0% | 4,742,544 | 4,743,650 Active Idle | | 0 | 0 See the Aggregate Performance Report (power_ssj2008-20190312-00911.SUT.txt) for additional details. Copyright (C) 2007-2019 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]