Dell Inc. PowerEdge R940 | SPECpower_ssj2008 = 11,958 overall ssj_ops/watt | ||||
Test Sponsor: | Dell Inc. | SPEC License #: | 55 | Test Method: | Single Node |
Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | Oct 9, 2017 |
Hardware Availability: | Sep-2017 | Software Availability: | Apr-2015 | Publication: | Oct 25, 2017 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.8% | 11,528,804 | 915 | 12,597 |
90% | 90.1% | 10,404,047 | 820 | 12,688 |
80% | 80.1% | 9,249,053 | 694 | 13,321 |
70% | 70.0% | 8,092,219 | 583 | 13,879 |
60% | 60.0% | 6,928,880 | 502 | 13,813 |
50% | 50.0% | 5,778,412 | 437 | 13,230 |
40% | 40.0% | 4,616,960 | 383 | 12,068 |
30% | 30.0% | 3,461,178 | 336 | 10,303 |
20% | 20.0% | 2,310,061 | 292 | 7,915 |
10% | 10.0% | 1,154,019 | 245 | 4,703 |
Active Idle | 0 | 106 | 0 | |
∑ssj_ops / ∑power = | 11,958 |
Set Identifier: | sut |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | PowerEdge R940 |
Hardware | |
---|---|
Hardware Vendor: | Dell Inc. |
Model: | PowerEdge R940 |
Form Factor: | 3U |
CPU Name: | Intel Xeon Platinum 8180 2.50 GHz |
CPU Characteristics: | 28 core, 2.50 GHz, 38.5 MB L3 Cache |
CPU Frequency (MHz): | 2500 |
CPU(s) Enabled: | 112 cores, 4 chips, 28 cores/chip |
Hardware Threads: | 224 (2 / core) |
CPU(s) Orderable: | 2,4 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per core |
Tertiary Cache: | 39424 KB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 384 |
# and size of DIMM: | 24 x 16 GB |
Memory Details: | 16GB 2Rx8 PC4-2666V; Dell p/n VM51C, Slots A1-6,B1-6,C1-6,D1-6 populated. |
Power Supply Quantity and Rating (W): | 2 x 1100 |
Power Supply Details: | Dell p/n T94HP |
Disk Drive: | 1 x 120 GB SATA M.2 stick, Dell p/n GKJ0P |
Disk Controller: | BOSS controller card, Dell p/n 5T20H |
# and type of Network Interface Cards (NICs) Installed: | 1 x quad-port Broadcom 5720, Dell P/N FM487 |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Balanced power plan in OS |
Operating System (OS): | Microsoft Windows Server 2012 R2 Datacenter |
OS Version: | Version 6.3.9600.17031 |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Java HotSpot 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmx1550m -Xms1550m -Xmn1300m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+AggressiveOpts |
JVM Affinity: | start /NODE [0,2,4,6] /AFFINITY [0x3,0xC,0x30,0xC0,0xC000,0x30000,0xC0000,0x30000000,0xC0000000,0x300000000,0xC00000000,0xC0000000000,0x300000000000,0xC00000000000]; start /NODE [1,3,5,7] /AFFINITY [0x3,0xC,0x30,0x3000,0xC000,0x30000,0xC0000,0x30000000,0xC0000000,0x300000000,0x30000000000,0xC0000000000,0x300000000000,0xC00000000000] |
JVM Instances: | 112 |
JVM Initial Heap (MB): | 1550 |
JVM Maximum Heap (MB): | 1550 |
JVM Address Bits: | 64 |
Boot Firmware Version: | 1.0.7 |
Management Firmware Version: | 3.00.00.00 A00 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | none |
Hardware | |
---|---|
Hardware Vendor: | Dell Inc |
Model: | PowerEdge R410 |
CPU Description: | Intel Xeon E5620, 2.40 GHz |
Memory amount (GB): | 32.0 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise Edition Service Pack 1 |
JVM Vendor: | Oracle Corporation |
JVM Version: | Hotspot(TM) Client VM, version 1.8.0_121 |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
Model: | WT210 |
Serial Number: | 91JB09484 |
Connectivity: | RS-232 |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | SIMCO |
Calibration Label: | 7736998 |
Date of Calibration: | 4-Apr-2017 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.1-260d064e-20161220 |
Setup Description: | Connected to power supply |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.10.26.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 25 mm in front of SUT main airflow intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 915 | 24.8 |
90% | 820 | 25.5 |
80% | 694 | 24.8 |
70% | 583 | 23.8 |
60% | 502 | 23.1 |
50% | 437 | 22.6 |
40% | 383 | 22.1 |
30% | 336 | 21.8 |
20% | 292 | 21.4 |
10% | 245 | 21.2 |
Active Idle | 106 | 21.1 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 21.1 | 255 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 11,586,079 | ||
Calibration 2 | 11,554,488 | ||
Calibration 3 | 11,551,113 | ||
ssj_ops@calibrated=11,552,801 | |||
100% | 99.8% | 11,552,801 | 11,528,804 |
90% | 90.1% | 10,397,521 | 10,404,047 |
80% | 80.1% | 9,242,241 | 9,249,053 |
70% | 70.0% | 8,086,960 | 8,092,219 |
60% | 60.0% | 6,931,680 | 6,928,880 |
50% | 50.0% | 5,776,400 | 5,778,412 |
40% | 40.0% | 4,621,120 | 4,616,960 |
30% | 30.0% | 3,465,840 | 3,461,178 |
20% | 20.0% | 2,310,560 | 2,310,061 |
10% | 10.0% | 1,155,280 | 1,154,019 |
Active Idle | 0 | 0 |