SPECpower_ssj2008 Copyright (C) 2007-2016 Standard Performance Evaluation Corporation H3C UIS R390x G2 SPECpower_ssj2008 = 11,654 overall ssj_ops/watt Test Sponsor: H3C SPEC License #: 9066 Tested By: H3C Test Location: Hangzhou, ZheJiang, China Test Date: Jul 27, 2016 Publication: Aug 24, 2016 Hardware Availability: Jul-2016 Software Availability: Apr-2015 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 98.4% | 3,422,594 | 252 | 13,566 90% | 90.1% | 3,132,546 | 230 | 13,637 80% | 80.0% | 2,783,568 | 204 | 13,661 70% | 69.6% | 2,421,804 | 174 | 13,895 60% | 60.1% | 2,088,638 | 158 | 13,239 50% | 50.0% | 1,739,861 | 144 | 12,098 40% | 40.0% | 1,392,560 | 129 | 10,822 30% | 30.1% | 1,045,220 | 115 | 9,054 20% | 20.0% | 696,501 | 102 | 6,795 10% | 10.0% | 346,448 | 88.0 | 3,935 Active Idle | 0 | 40.1 | 0 sum of ssj_ops / sum of power = | 11,654 System Under Test Set: 'sut' Set Identifier: sut Set Description: System Under Test # of Identical Nodes: 1 Comment: Here is a comment for this set. HARDWARE Hardware Vendor: H3C Model: UIS R390x G2 Form Factor: 2U CPU Name: Intel Xeon E5-2699 v4 CPU Characteristics: 22-Core, 2.20GHz, 55MB L3 Cache CPU Frequency (MHz): 2200 CPU(s) Enabled: 44 cores, 2 chips, 22 cores/chip Hardware Threads: 88 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 55 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 64 # and size of DIMM: 8 x 8 GB Memory Details: 8GB 2Rx8 Hynix registered ECC 2400Mhz;slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H populated Power Supply Quantity and Rating 1 x 550 (W): Power Supply Details: ASPOWER P/N 0213A05N Disk Drive: SATA DOM 32GB P/N 0202A0UT Disk Controller: Integrated SATA controller # and type of Network Interface 4 x Intel(R) I350 Gigabit Network Connection Cards (NICs) Installed: NICs Enabled in Firmware / OS / 4/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Power Saver Mode enabled in OS (see SUT Notes) Operating System (OS): Microsoft Windows Server 2012 R2 Datacenter OS Version: Version 6.3 (Build 9600) Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmx15g -Xms15g -Xmn13g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=90 -XX:ParallelGCThreads=22 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=15 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -Xx:+OptimizeStringConcat -XX:UseStringCache JVM Affinity: start /NODE [0,1,2,3] /AFFINITY [3FFFFF] JVM Instances: 4 JVM Initial Heap (MB): 15000 JVM Maximum Heap (MB): 15000 JVM Address Bits: 64 Boot Firmware Version: 1.00.10 Management Firmware Version: 1.00.11 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: None Boot Firmware Settings * Hardware Prefetcher: disabled * Adjacent Cache Line Prefetch: disabled * DCU Streamer Prefetcher: disabled * Turbo Mode: disabled * C-state: enabled * Autonomous C-state Support: enable * Override OS Energy Performance: disable * Energy Efficient Turbo: disable * C1E: enable * P State Domain: one * P State Coordination: any * Enable CPU HWPM: HWPM NATIVE MODE * Memory DDR Frequency Limit: 1866MHZ * QPI Link Speed: 6.4GT/s * COD Enable: enabled * Demand Scrubbing: disabled * USB Configuration EHCI 2: disabled * HT Technology: enabled Management Firmware Settings dynamic power capping enable System Under Test Notes * Each JVM instance was bound to 22 logical processors * Using the local security settings console, "lock pages in memory " was enabled for the user running the benchmark * Run initiated via SSH, " Bitvise SSH Server " is installed in SUT * Hard Disk set to turn off after 1 minute * Display set to turn off after 1 minute * Power Saver Power Plan Minimum processor state set to 0% * Maximum processor state set to 100% * SPECpower_ssj.props input.load_level.number_warehouses set to 88 Controller System HARDWARE Hardware Vendor: H3C Model: UIS R390x G2 CPU Description: Intel Xeon E5 2620 V4 Memory amount (GB): 128 SOFTWARE Operating System (OS): Microsoft Windows Server 2008 Datacenter JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: CHROMA Model: 66202 Serial Number: 662022005360 Connectivity: GPIB Input Connection: Default Metrology Institute: CNAS (China National Accreditation Service for Conformity Assessment) Accredited by: Calibration and Testing Center of CEPREI Calibration Label: JZ16-0072-0004 Date of Calibration: 18-Jan-2016 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.0-efc0c004-20160120 Setup Description: Connected to PSU 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: DIGI. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: placed in front the main airflow inlet of the SUT less than 50mm. Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 252 | 24.6 90% | 230 | 24.8 80% | 204 | 24.9 70% | 174 | 25.0 60% | 158 | 25.1 50% | 144 | 25.1 40% | 129 | 25.0 30% | 115 | 24.9 20% | 102 | 24.8 10% | 88.0 | 24.8 Active Idle | 40.1 | 24.6 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 230V / 50 Hz / 1 phase / | 24.6 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20160726-00739-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 3,378,954 Calibration 2 | | | 3,476,365 Calibration 3 | | | 3,479,220 ssj_ops@calibrated=3,477,792 100% | 98.4% | 3,477,792 | 3,422,594 90% | 90.1% | 3,130,013 | 3,132,546 80% | 80.0% | 2,782,234 | 2,783,568 70% | 69.6% | 2,434,455 | 2,421,804 60% | 60.1% | 2,086,675 | 2,088,638 50% | 50.0% | 1,738,896 | 1,739,861 40% | 40.0% | 1,391,117 | 1,392,560 30% | 30.1% | 1,043,338 | 1,045,220 20% | 20.0% | 695,558 | 696,501 10% | 10.0% | 347,779 | 346,448 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20160726-00739.WIN-3O4CJA2S457.txt) for additional details. Copyright (C) 2007-2016 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]