H3C UIS R390x G2 | SPECpower_ssj2008 = 11,654 overall ssj_ops/watt | ||||
Test Sponsor: | H3C | SPEC License #: | 9066 | Test Method: | Single Node |
Tested By: | H3C | Test Location: | Hangzhou, ZheJiang, China | Test Date: | Jul 27, 2016 |
Hardware Availability: | Jul-2016 | Software Availability: | Apr-2015 | Publication: | Aug 24, 2016 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 98.4% | 3,422,594 | 252 | 13,566 |
90% | 90.1% | 3,132,546 | 230 | 13,637 |
80% | 80.0% | 2,783,568 | 204 | 13,661 |
70% | 69.6% | 2,421,804 | 174 | 13,895 |
60% | 60.1% | 2,088,638 | 158 | 13,239 |
50% | 50.0% | 1,739,861 | 144 | 12,098 |
40% | 40.0% | 1,392,560 | 129 | 10,822 |
30% | 30.1% | 1,045,220 | 115 | 9,054 |
20% | 20.0% | 696,501 | 102 | 6,795 |
10% | 10.0% | 346,448 | 88.0 | 3,935 |
Active Idle | 0 | 40.1 | 0 | |
∑ssj_ops / ∑power = | 11,654 |
Set Identifier: | sut |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | Here is a comment for this set. |
Hardware | |
---|---|
Hardware Vendor: | H3C |
Model: | UIS R390x G2 |
Form Factor: | 2U |
CPU Name: | Intel Xeon E5-2699 v4 |
CPU Characteristics: | 22-Core, 2.20GHz, 55MB L3 Cache |
CPU Frequency (MHz): | 2200 |
CPU(s) Enabled: | 44 cores, 2 chips, 22 cores/chip |
Hardware Threads: | 88 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
Tertiary Cache: | 55 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 64 |
# and size of DIMM: | 8 x 8 GB |
Memory Details: | 8GB 2Rx8 Hynix registered ECC 2400Mhz;slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H populated |
Power Supply Quantity and Rating (W): | 1 x 550 |
Power Supply Details: | ASPOWER P/N 0213A05N |
Disk Drive: | SATA DOM 32GB P/N 0202A0UT |
Disk Controller: | Integrated SATA controller |
# and type of Network Interface Cards (NICs) Installed: | 4 x Intel(R) I350 Gigabit Network Connection |
NICs Enabled in Firmware / OS / Connected: | 4/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Power Saver Mode enabled in OS (see SUT Notes) |
Operating System (OS): | Microsoft Windows Server 2012 R2 Datacenter |
OS Version: | Version 6.3 (Build 9600) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmx15g -Xms15g -Xmn13g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=90 -XX:ParallelGCThreads=22 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=15 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -Xx:+OptimizeStringConcat -XX:UseStringCache |
JVM Affinity: | start /NODE [0,1,2,3] /AFFINITY [3FFFFF] |
JVM Instances: | 4 |
JVM Initial Heap (MB): | 15000 |
JVM Maximum Heap (MB): | 15000 |
JVM Address Bits: | 64 |
Boot Firmware Version: | 1.00.10 |
Management Firmware Version: | 1.00.11 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | H3C |
Model: | UIS R390x G2 |
CPU Description: | Intel Xeon E5 2620 V4 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2008 Datacenter |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | CHROMA |
Model: | 66202 |
Serial Number: | 662022005360 |
Connectivity: | GPIB |
Input Connection: | Default |
Metrology Institute: | CNAS (China National Accreditation Service for Conformity Assessment) |
Accredited by: | Calibration and Testing Center of CEPREI |
Calibration Label: | JZ16-0072-0004 |
Date of Calibration: | 18-Jan-2016 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.0-efc0c004-20160120 |
Setup Description: | Connected to PSU 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | DIGI. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | placed in front the main airflow inlet of the SUT less than 50mm. |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 252 | 24.6 |
90% | 230 | 24.8 |
80% | 204 | 24.9 |
70% | 174 | 25.0 |
60% | 158 | 25.1 |
50% | 144 | 25.1 |
40% | 129 | 25.0 |
30% | 115 | 24.9 |
20% | 102 | 24.8 |
10% | 88.0 | 24.8 |
Active Idle | 40.1 | 24.6 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
230V / 50 Hz / 1 phase / 2 wires | 24.6 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 3,378,954 | ||
Calibration 2 | 3,476,365 | ||
Calibration 3 | 3,479,220 | ||
ssj_ops@calibrated=3,477,792 | |||
100% | 98.4% | 3,477,792 | 3,422,594 |
90% | 90.1% | 3,130,013 | 3,132,546 |
80% | 80.0% | 2,782,234 | 2,783,568 |
70% | 69.6% | 2,434,455 | 2,421,804 |
60% | 60.1% | 2,086,675 | 2,088,638 |
50% | 50.0% | 1,738,896 | 1,739,861 |
40% | 40.0% | 1,391,117 | 1,392,560 |
30% | 30.1% | 1,043,338 | 1,045,220 |
20% | 20.0% | 695,558 | 696,501 |
10% | 10.0% | 347,779 | 346,448 |
Active Idle | 0 | 0 |