Hewlett Packard Enterprise ProLiant DL560 Gen9 | SPECpower_ssj2008 = 8,151 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Jun 1, 2016 |
Hardware Availability: | Jun-2016 | Software Availability: | Jan-2015 | Publication: | Jun 22, 2016 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.1% | 5,223,316 | 557 | 9,376 |
90% | 90.0% | 4,746,345 | 498 | 9,534 |
80% | 80.0% | 4,217,887 | 433 | 9,735 |
70% | 70.1% | 3,693,715 | 382 | 9,675 |
60% | 60.0% | 3,164,590 | 340 | 9,302 |
50% | 50.0% | 2,639,057 | 315 | 8,391 |
40% | 40.0% | 2,109,876 | 289 | 7,309 |
30% | 30.0% | 1,581,399 | 257 | 6,159 |
20% | 20.1% | 1,057,420 | 218 | 4,853 |
10% | 10.0% | 527,060 | 178 | 2,953 |
Active Idle | 0 | 86.3 | 0 | |
∑ssj_ops / ∑power = | 8,151 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL560 Gen9 |
Form Factor: | 2U |
CPU Name: | Intel Xeon E5-4669 v3 2.10 GHz |
CPU Characteristics: | 18-Core, 2.10 GHz, 45MB L3 Cache |
CPU Frequency (MHz): | 2100 |
CPU(s) Enabled: | 72 cores, 4 chips, 18 cores/chip |
Hardware Threads: | 144 (2 / core) |
CPU(s) Orderable: | 1,2,3,4 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 MB I+D on chip per core |
Tertiary Cache: | 45 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 64 |
# and size of DIMM: | 8 x 8192 MB |
Memory Details: | 8GB 2Rx8 PC4-2133P-R; slots 1, 4, 9 and 12 for each processor |
Power Supply Quantity and Rating (W): | 1 x 1200 |
Power Supply Details: | HPE 656364-B21 |
Disk Drive: | 1 x HP 120GB Value Endurance Solid State M.2 Enablement Kit for ProLiant ML/DL Servers (788028-B21) |
Disk Controller: | embedded SATA |
# and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 2p 361-T Ethernet Adapter |
NICs Enabled in Firmware / OS / Connected: | 2/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Windows Server 2012 R2 Datacenter |
OS Version: | Version 6.3 (Build 9600) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmx7g -Xms7g -Xmn6g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=22 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=9000 -XX:MaxInlineSize=270 -XX:FreqInlineSize=6000 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+AggressiveOpts -XX:+OptimizeStringConcat -XX:+UseStringCache |
JVM Affinity: | start /NODE [0,1,2,3] /AFFINITY [0x3FFFF,FFFFC0000] |
JVM Instances: | 8 |
JVM Initial Heap (MB): | 7000 |
JVM Maximum Heap (MB): | 7000 |
JVM Address Bits: | 64 |
Boot Firmware Version: | P85 v2.20 (05/05/2016) |
Management Firmware Version: | 2.41 pass 2 Mar 11 2016 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 G9 |
CPU Description: | 2x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2012 R2 - V6.3 9600 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_74-b02 (build 25.74-b02, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT210 |
Serial Number: | 91GB53023 |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | HPE Metrology |
Calibration Label: | 705437 |
Date of Calibration: | 05-Apr-2016 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.0-efc0c004-20160120 |
Setup Description: | SUT Power Supplies 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 557 | 20.9 |
90% | 498 | 21.2 |
80% | 433 | 21.1 |
70% | 382 | 21.0 |
60% | 340 | 21.1 |
50% | 315 | 20.9 |
40% | 289 | 20.9 |
30% | 257 | 20.8 |
20% | 218 | 20.4 |
10% | 178 | 20.4 |
Active Idle | 86.3 | 20.8 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
210V / 60 Hz / 1 phase / 2 wires | 20.4 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 5,307,690 | ||
Calibration 2 | 5,271,078 | ||
Calibration 3 | 5,274,668 | ||
ssj_ops@calibrated=5,272,873 | |||
100% | 99.1% | 5,272,873 | 5,223,316 |
90% | 90.0% | 4,745,585 | 4,746,345 |
80% | 80.0% | 4,218,298 | 4,217,887 |
70% | 70.1% | 3,691,011 | 3,693,715 |
60% | 60.0% | 3,163,724 | 3,164,590 |
50% | 50.0% | 2,636,436 | 2,639,057 |
40% | 40.0% | 2,109,149 | 2,109,876 |
30% | 30.0% | 1,581,862 | 1,581,399 |
20% | 20.1% | 1,054,575 | 1,057,420 |
10% | 10.0% | 527,287 | 527,060 |
Active Idle | 0 | 0 |