SPECpower_ssj2008 Copyright (C) 2007-2016 Standard Performance Evaluation Corporation Fujitsu FUJITSU Server PRIMERGY RX2540 M2 SPECpower_ssj2008 = 11,638 overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Paderborn, NRW, Germany Test Date: Apr 7, 2016 Publication: Apr 27, 2016 Hardware Availability: Apr-2016 Software Availability: Jan-2015 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 100.2% | 3,445,027 | 255 | 13,504 90% | 90.1% | 3,096,297 | 224 | 13,814 80% | 79.9% | 2,748,129 | 196 | 13,988 70% | 70.1% | 2,410,319 | 174 | 13,820 60% | 60.1% | 2,065,074 | 158 | 13,081 50% | 50.0% | 1,720,551 | 145 | 11,868 40% | 40.0% | 1,374,694 | 132 | 10,433 30% | 30.0% | 1,030,251 | 114 | 9,048 20% | 20.0% | 688,822 | 98.9 | 6,965 10% | 10.0% | 342,368 | 84.7 | 4,043 Active Idle | 0 | 43.6 | 0 sum of ssj_ops / sum of power = | 11,638 System Under Test Set: 'RX2540 M2' Set Identifier: RX2540 M2 Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node HARDWARE Hardware Vendor: Fujitsu Model: FUJITSU Server PRIMERGY RX2540 M2 Form Factor: 2U CPU Name: Intel Xeon E5-2699 v4 CPU Characteristics: 22-Core, 2.20GHz, 55MB L3 Cache CPU Frequency (MHz): 2200 CPU(s) Enabled: 44 cores, 2 chips, 22 cores/chip Hardware Threads: 88 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 55 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 64 # and size of DIMM: 8 x 8192 MB Memory Details: 8 GB DDR4, registered, ECC, 2400 MHz, PC4-2400R, DIMM, 2Rx8; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H populated Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: Fujitsu Technology Solutions S26113-F615-E10 Disk Drive: 1 x SSD SATA 6G 64GB DOM N H-P, S26361-F5522-E64 Disk Controller: Integrated SATA Controller # and type of Network Interface 1 x PLAN AP 1x1Gbit Cu Intel I210-T1 LP Cards (NICs) Installed: (Copper), S26361-F3852-E201 NICs Enabled in Firmware / OS / 1/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled ("Fujitsu Enhanced Power Settings" power plan) Operating System (OS): Microsoft Windows Server 2012 R2 Standard OS Version: Version 6.3.9600 Build 9600 Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmn11g -Xms13g -Xmx13g -XX:SurvivorRatio=60 -XX:TargetSurvivorRatio=90 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=22 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC -XX:-UseAdaptiveSizePolicy JVM Affinity: start /NODE [0,1,2,3] /AFFINTY 0x3FFFFF JVM Instances: 4 JVM Initial Heap (MB): 13000 JVM Maximum Heap (MB): 13000 JVM Address Bits: 64 Boot Firmware Version: R1.6.0 Management Firmware Version: 8.20F Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: None Boot Firmware Settings * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Line Prefetch = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "ASPM Support = L1 Only" in BIOS. * Set "DMI Control = Gen1" in BIOS. * Set "Onboard USB Controllers = Disabled" in BIOS. * Set "Power Technology = Custom" in BIOS. * Set "Turbo Mode = Disabled" in BIOS. * Set "Autonomous C-state Support = Enabled" in BIOS. * Set "Uncore Frequency Override = Nominal" in BIOS. * Set "QPI Link Frequency Select = 6.4 GT/s" in BIOS. * Set "Override OS Energy Performance = Enabled" in BIOS. * Set "Energy Performance = Energy Efficient" in BIOS. * Set "DDR Performance = Energy optimized" in BIOS. (effective memory frequency = 1866 MHz) * Set "Intel Virtualization Technology = Disabled" in BIOS. * Set "COD Enable = Enabled" in BIOS. Management Firmware Settings None System Under Test Notes * Set "Turn off hard disk after = 1 Minute" in OS. * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Benchmark was started via Windows Remote Desktop Connection. * Each JVM instance was affinitized to 22 logical processors. Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX200 S6 CPU Description: Intel Xeon X5680 Memory amount (GB): 48 SOFTWARE Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise SP1 JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 25.25-b02, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: ZES Zimmer Electronic Systems GmbH Model: LMG95 Serial Number: 11210802 Connectivity: RS-232 Input Connection: Default (20A) Metrology Institute: PTB (Physikalisch Technische Bundesanstalt) Accredited by: Atlas Copco Tools Central Europe GmbH Calibration Label: W15113632 Date of Calibration: 30-Nov-2015 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.0-efc0c004-20160120 Setup Description: Connected to PSU 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes * SPECpower_ssj.props input.load_level.number_warehouses set to 88 due to a known inconsistency in processor reporting with this Java version. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 255 | 21.7 90% | 224 | 21.7 80% | 196 | 20.9 70% | 174 | 20.8 60% | 158 | 21.1 50% | 145 | 21.4 40% | 132 | 21.6 30% | 114 | 21.1 20% | 98.9 | 20.6 10% | 84.7 | 20.6 Active Idle | 43.6 | 21.0 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 230V / 50 Hz / 1 phase / | 20.6 | 117 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20160412-00722-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 3,421,851 Calibration 2 | | | 3,444,289 Calibration 3 | | | 3,432,269 ssj_ops@calibrated=3,438,279 100% | 100.2% | 3,438,279 | 3,445,027 90% | 90.1% | 3,094,451 | 3,096,297 80% | 79.9% | 2,750,623 | 2,748,129 70% | 70.1% | 2,406,795 | 2,410,319 60% | 60.1% | 2,062,967 | 2,065,074 50% | 50.0% | 1,719,140 | 1,720,551 40% | 40.0% | 1,375,312 | 1,374,694 30% | 30.0% | 1,031,484 | 1,030,251 20% | 20.0% | 687,656 | 688,822 10% | 10.0% | 343,828 | 342,368 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20160412-00722.WIN-CICQLO9RTVD.txt) for additional details. Copyright (C) 2007-2016 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]