Fujitsu FUJITSU Server PRIMERGY RX2540 M2 | SPECpower_ssj2008 = 11,638 overall ssj_ops/watt | ||||
Test Sponsor: | Fujitsu | SPEC License #: | 19 | Test Method: | Single Node |
Tested By: | Fujitsu | Test Location: | Paderborn, NRW, Germany | Test Date: | Apr 7, 2016 |
Hardware Availability: | Apr-2016 | Software Availability: | Jan-2015 | Publication: | Apr 27, 2016 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 100.2% | 3,445,027 | 255 | 13,504 |
90% | 90.1% | 3,096,297 | 224 | 13,814 |
80% | 79.9% | 2,748,129 | 196 | 13,988 |
70% | 70.1% | 2,410,319 | 174 | 13,820 |
60% | 60.1% | 2,065,074 | 158 | 13,081 |
50% | 50.0% | 1,720,551 | 145 | 11,868 |
40% | 40.0% | 1,374,694 | 132 | 10,433 |
30% | 30.0% | 1,030,251 | 114 | 9,048 |
20% | 20.0% | 688,822 | 98.9 | 6,965 |
10% | 10.0% | 342,368 | 84.7 | 4,043 |
Active Idle | 0 | 43.6 | 0 | |
∑ssj_ops / ∑power = | 11,638 |
Set Identifier: | RX2540 M2 |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | Single Node |
Hardware | |
---|---|
Hardware Vendor: | Fujitsu |
Model: | FUJITSU Server PRIMERGY RX2540 M2 |
Form Factor: | 2U |
CPU Name: | Intel Xeon E5-2699 v4 |
CPU Characteristics: | 22-Core, 2.20GHz, 55MB L3 Cache |
CPU Frequency (MHz): | 2200 |
CPU(s) Enabled: | 44 cores, 2 chips, 22 cores/chip |
Hardware Threads: | 88 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
Tertiary Cache: | 55 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 64 |
# and size of DIMM: | 8 x 8192 MB |
Memory Details: | 8 GB DDR4, registered, ECC, 2400 MHz, PC4-2400R, DIMM, 2Rx8; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H populated |
Power Supply Quantity and Rating (W): | 1 x 800 |
Power Supply Details: | Fujitsu Technology Solutions S26113-F615-E10 |
Disk Drive: | 1 x SSD SATA 6G 64GB DOM N H-P, S26361-F5522-E64 |
Disk Controller: | Integrated SATA Controller |
# and type of Network Interface Cards (NICs) Installed: | 1 x PLAN AP 1x1Gbit Cu Intel I210-T1 LP (Copper), S26361-F3852-E201 |
NICs Enabled in Firmware / OS / Connected: | 1/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled ("Fujitsu Enhanced Power Settings" power plan) |
Operating System (OS): | Microsoft Windows Server 2012 R2 Standard |
OS Version: | Version 6.3.9600 Build 9600 |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmn11g -Xms13g -Xmx13g -XX:SurvivorRatio=60 -XX:TargetSurvivorRatio=90 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=22 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC -XX:-UseAdaptiveSizePolicy |
JVM Affinity: | start /NODE [0,1,2,3] /AFFINTY 0x3FFFFF |
JVM Instances: | 4 |
JVM Initial Heap (MB): | 13000 |
JVM Maximum Heap (MB): | 13000 |
JVM Address Bits: | 64 |
Boot Firmware Version: | R1.6.0 |
Management Firmware Version: | 8.20F |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | Fujitsu |
Model: | PRIMERGY RX200 S6 |
CPU Description: | Intel Xeon X5680 |
Memory amount (GB): | 48 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise SP1 |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 25.25-b02, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | ZES Zimmer Electronic Systems GmbH |
Model: | LMG95 |
Serial Number: | 11210802 |
Connectivity: | RS-232 |
Input Connection: | Default (20A) |
Metrology Institute: | PTB (Physikalisch Technische Bundesanstalt) |
Accredited by: | Atlas Copco Tools Central Europe GmbH |
Calibration Label: | W15113632 |
Date of Calibration: | 30-Nov-2015 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.0-efc0c004-20160120 |
Setup Description: | Connected to PSU 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | Watchport Virtual Port 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main air intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 255 | 21.7 |
90% | 224 | 21.7 |
80% | 196 | 20.9 |
70% | 174 | 20.8 |
60% | 158 | 21.1 |
50% | 145 | 21.4 |
40% | 132 | 21.6 |
30% | 114 | 21.1 |
20% | 98.9 | 20.6 |
10% | 84.7 | 20.6 |
Active Idle | 43.6 | 21.0 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
230V / 50 Hz / 1 phase / 2 wires | 20.6 | 117 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 3,421,851 | ||
Calibration 2 | 3,444,289 | ||
Calibration 3 | 3,432,269 | ||
ssj_ops@calibrated=3,438,279 | |||
100% | 100.2% | 3,438,279 | 3,445,027 |
90% | 90.1% | 3,094,451 | 3,096,297 |
80% | 79.9% | 2,750,623 | 2,748,129 |
70% | 70.1% | 2,406,795 | 2,410,319 |
60% | 60.1% | 2,062,967 | 2,065,074 |
50% | 50.0% | 1,719,140 | 1,720,551 |
40% | 40.0% | 1,375,312 | 1,374,694 |
30% | 30.0% | 1,031,484 | 1,030,251 |
20% | 20.0% | 687,656 | 688,822 |
10% | 10.0% | 343,828 | 342,368 |
Active Idle | 0 | 0 |