SPECpower_ssj2008 Copyright (C) 2007-2015 Standard Performance Evaluation Corporation Dell Inc. PowerEdge M830 (Intel Xeon E5-4669 v3, 2.10 GHz) SPECpower_ssj2008 = NC overall ssj_ops/watt Test Sponsor: Dell Inc. SPEC License #: 55 Tested By: Dell Inc. Test Location: Round Rock, TX, USA Test Date: Jul 1, 2015 Publication: Jul 28, 2015 Hardware Availability: Jun-2015 Software Availability: Jun-2013 Test Method: Multi Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered SPEC has determined that this result is not in compliance with the SPECpower_ssj2008 run and reporting rules. Specifically, this result has been marked as Non-Compliant because more than three years elapsed between the Java Runtime Environment General Availability date and the processor General Availability, and more than four years between the Operating System General Availability and the processor General Availability. Aggregate SUT Data # of Nodes | # of Chips | # of Cores | # of | Total RAM | # of OS Images | # of JVM | | | Threads | (GB) | | Instances ---------- | ---------- | ---------- | ---------- | ---------- | -------------- | --------- 8 | 32 | 576 | 1,152 | 1,024 | 8 | 576 System Under Test Shared Hardware SHARED HARDWARE Enclosure: Dell PowerEdge M1000e Form Factor: 10U Power Supply Quantity and Rating 3 x 3000 (W): Power Supply Details: Dell PN 8V4DK Network Switch: Dell PowerConnect 6248 Network Switch Details: 48 Port 1Gb Ethernet Switch KVM Switch: None KVM Switch Details: N/A Other Hardware: Dell M1000e Chassis Management Controller, Dell P/N: JV95D; Dell 16-Port Gigabit Ethernet Pass-Through Module, Dell P/N: WW060 Comment: Network switch not measured for power Set: 'sut' Set Identifier: sut Set Description: M830 # of Identical Nodes: 8 Comment: None HARDWARE PER NODE Hardware Vendor: Dell Inc. Model: PowerEdge M830 (Intel Xeon E5-4669 v3, 2.10 GHz) Form Factor: Blade CPU Name: Intel Xeon E5-4669 v3 2.10 GHz (Intel Turbo Boost technology up to 2.90 GHz) CPU Characteristics: 18 Core, 2.10 GHz, 45MB L3 Cache CPU Frequency (MHz): 2100 CPU(s) Enabled: 72 cores, 4 chips, 18 cores/chip Hardware Threads: 144 (2 / core) CPU(s) Orderable: 2,4 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 45 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 128 # and size of DIMM: 16 x 8 GB Memory Details: 8GB 2Rx8 PC4-2133P ECC, Dell P/N H8PGN, Slots A1-4,B1-4,C1-4,D1-4 populated Power Supply Quantity and Rating None (W): Power Supply Details: Shared Disk Drive: 1 x 120 GB 2.5" SATA SSD, Dell P/N: XRD5Y Disk Controller: Embedded SATA # and type of Network Interface 1 x Broadcom BCM57810-K Dual Port 10 Gb, Cards (NICs) Installed: Dell P/N C0P7J NICs Enabled in Firmware / OS / 2/2/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE PER NODE Power Management: Power Saver Mode in OS (See Notes) Operating System (OS): Microsoft Windows Server 2008 Enterprise R2 SP1 OS Version: Version 6.1.7601 Service Pack 1 Build 7601 Filesystem: NTFS JVM Vendor: IBM Corporation JVM Version: IBM J9 VM (build 2.6, JRE 1.7.0 Windows Server 2008 R2 amd64-64 20120322_106209 (JIT enabled, AOT enabled) JVM Command-line Options: -Xaggressive -Xcompressedrefs -Xmn825m -Xms975m -Xmx975m -XlockReservation -Xnoloa -XtlhPrefetch -Xlp -Xconcurrentlevel0 -Xthr:minimizeusercpu -Xgcthreads2 -Xgcpolicy:gencon JVM Affinity: start /NODE [0,1,2,3] /affinity [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000 ,0x30000,0xC0000,0x300000,0xC00000,0x3000000 ,0xC000000,0x30000000,0xC0000000,0x300000000 ,0xC00000000] JVM Instances: 72 JVM Initial Heap (MB): 975 JVM Maximum Heap (MB): 975 JVM Address Bits: 64 Boot Firmware Version: 1.1.5 Management Firmware Version: iDRAC7 2.15.10.10 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: IBM Websphere Application Server V8.5.0.0, Microsoft Hotfix for Windows (KB2510206) Boot Firmware Settings * QPI Speed set to 6.4 GT/s * Adjacent Cache Line Prefetch disabled. * Hardware Prefetcher disabled. * DCU Streamer Prefetcher disabled. * System Profile set to Custom * CPU Power management set to System DBPM (DAPC). * Turbo Boost Enabled * Energy Efficient Turbo Enabled * Memory DDR Freq Limit set to Max Performance * C1E enabled * C States enabled * Memory Patrol Scrub disabled * Memory Refresh Rate set to 1x * Memory Operating Voltage set to Auto * Collaborative CPU Performance Control disabled * energy Efficient Policy set to Energy Efficient * Uncore Frequency set to Dynamic Management Firmware Settings none System Under Test Notes * Each JVM instance was affinitized to two logical processors * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Run was started remotely via psexec script * Windows Balanced power settings: * Turn off Hard Disk after 1 Minute * Turn off Display after 1 Minute * SPECpower_ssj.props input.load_level.number_warehouses set to 144 * Microsoft Hotfix KB2510206 has been installed due to known problems with the group assignment algorithm which does not create a balanced group assignment. For more information see http://support.microsoft.com/kb/2510206 * BIOS.SysProfileSettings.PowerSaver enabled via racadm Controller System HARDWARE Hardware Vendor: Dell Inc. Model: R720 CPU Description: Xeon 2650 v2 Memory amount (GB): 256 SOFTWARE Operating System (OS): Microsoft Windows Server 2012 Enterprise R2 SP1 JVM Vendor: IBM Corporation JVM Version: IBM J9 VM (build 2.6, JRE 1.7.0 Windows Server 2008 R2 amd64-64 20120322_106209 (JIT enabled, AOT enabled) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Meters and Instruments Corporation Model: WT210 Serial Number: 91KA21978 Connectivity: RS-232 Input Connection: Default Metrology Institute: NIST Accredited by: Simco Electronics Calibration Label: 6930823 Date of Calibration: 06-May-2015 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.7.1-4db18c59-20150211 Setup Description: Connected to SUT power supply 1 POWER ANALYZER PWR2 Hardware Vendor: Yokogawa Meters and Instruments Corporation Model: WT210 Serial Number: 91K948943 Connectivity: RS-232 Input Connection: Default Metrology Institute: NIST Accredited by: Simco Electronics Calibration Label: 6703179 Date of Calibration: 13-Oct-2014 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.7.1-4db18c59-20150211 Setup Description: Connected to SUT power supply 2 POWER ANALYZER PWR3 Hardware Vendor: Yokogawa Meters and Instruments Corporation Model: WT210 Serial Number: 91N819622 Connectivity: RS-232 Input Connection: Default Metrology Institute: NIST Accredited by: Simco Electronics Calibration Label: 6703181 Date of Calibration: 13-Oct-2014 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.7.1-4db18c59-20150211 Setup Description: Connected to SUT power supply 3 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.30.2.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 50 mm in front of SUT main airflow intake Notes None Copyright (C) 2007-2015 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]