Fujitsu FUJITSU Server PRIMERGY CX2550 M1 SPECpower_ssj2008 = 9,971 overall ssj_ops/watt
Test Sponsor: Fujitsu SPEC License #: 19 Test Method: Multi Node
Tested By: Fujitsu Test Location: Paderborn, NRW, Germany Test Date: Nov 15, 2014
Hardware Availability: Dec-2014 Software Availability: Jun-2013 Publication: Dec 10, 2014
System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered
Benchmark Results Summary
Performance Power Performance to Power Ratio
Target Load Actual Load ssj_ops Average Active Power (W)
100% 100.0% 12,913,912 1,152 11,206
90% 90.0% 11,626,095 1,036 11,225
80% 80.0% 10,327,585 914 11,297
70% 70.1% 9,048,447 791 11,441
60% 60.0% 7,752,149 681 11,382
50% 49.9% 6,449,897 602 10,708
40% 40.0% 5,168,294 538 9,611
30% 30.0% 3,878,894 474 8,177
20% 20.0% 2,586,185 415 6,228
10% 10.0% 1,293,707 350 3,698
Active Idle 0 171 0
∑ssj_ops / ∑power = 9,971
Graph of results
Aggregate SUT Data
# of Nodes # of Chips # of Cores # of Threads Total RAM (GB) # of OS Images # of JVM Instances
4 8 144 288 256 4 144
System Under Test
Shared Hardware
Shared Hardware
Enclosure: PRIMERGY CX400 M1
Form Factor: 2U
Power Supply Quantity and Rating (W): 2 x 1600
Power Supply Details: Fujitsu Technology Solutions S26113-F617-E50
Network Switch: DLink DGS-3024
Network Switch Details: 24-Port Gigabit Switch
KVM Switch: None
KVM Switch Details: None
Other Hardware: None
Comment: Network switch is a standalone device and is not included in the measured power.
Set: 'CX2550 M1'
Set Identifier: CX2550 M1
Set Description: System Under Test
# of Identical Nodes: 4
Comment: Multi Node
Hardware per Node
Hardware Vendor: Fujitsu
Model: FUJITSU Server PRIMERGY CX2550 M1
Form Factor: Blade
CPU Name: Intel Xeon E5-2699 v3
CPU Characteristics: 18-Core, 2.30GHz, 45MB L3 Cache
CPU Frequency (MHz): 2300
CPU(s) Enabled: 36 cores, 2 chips, 18 cores/chip
Hardware Threads: 72 (2 / core)
CPU(s) Orderable: 1,2 chips
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 256 KB I+D on chip per core
Tertiary Cache: 45 MB I+D on chip per chip
Other Cache: None
Memory Amount (GB): 64
# and size of DIMM: 8 x 8192 MB
Memory Details: 8 GB DDR4, registered, ECC, 2133 MHz, PC4-2133R, DIMM, 2Rx8; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H populated
Power Supply Quantity and Rating (W): None
Power Supply Details: N/A
Disk Drive: 1 x SSD SATA 6G 64GB DOM N H-P, S26361-F5523-E64
Disk Controller: Integrated SATA Controller
# and type of Network Interface Cards (NICs) Installed: 2 x Intel I350 Gigabit Network Connection (onboard)
NICs Enabled in Firmware / OS / Connected: 1/1/1
Network Speed (Mbit): 1000
Keyboard: None
Mouse: None
Monitor: None
Optical Drives: No
Other Hardware: None
Software per Node
Power Management: Enabled ("Fujitsu Enhanced Power Settings" power plan)
Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise SP1
OS Version: Version 6.1.7601 Service Pack 1 Build 7601
Filesystem: NTFS
JVM Vendor: IBM Corporation
JVM Version: IBM J9 VM (build 2.6, JRE 1.7.0 Windows Server 2008 R2 amd64-64 20120322_106209 (JIT enabled, AOT enabled)
JVM Command-line Options: -Xmn825m -Xms975m -Xmx975m -Xaggressive -Xcompressedrefs -Xgcpolicy:gencon -XlockReservation -Xnoloa -XtlhPrefetch -Xlp -Xconcurrentlevel0 -Xthr:minimizeusercpu -Xgcthreads2 (-Xgcthreads1 for JVM5 and JVM23)
JVM Affinity: start /NODE [0,1,2,3] /AFFINITY [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000,0x30000]
JVM Instances: 36
JVM Initial Heap (MB): 975
JVM Maximum Heap (MB): 975
JVM Address Bits: 64
Boot Firmware Version: R1.7.0
Management Firmware Version: 7.64F
Workload Version: SSJ 1.2.10
Director Location: Controller
Other Software: IBM WebSphere Application Server V8.5.0.0, Microsoft Hotfix for Windows (KB2510206)
Boot Firmware Settings
Management Firmware Settings
None
System Under Test Notes
Controller System
Hardware
Hardware Vendor: Fujitsu
Model: PRIMERGY RX200 S6
CPU Description: Intel Xeon X5680
Memory amount (GB): 48
Software
Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise SP1
JVM Vendor: Oracle Corporation
JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode)
CCS Version: 1.2.6
Measurement Devices
Power Analyzer pwr1
Hardware Vendor: ZES Zimmer Electronic Systems GmbH
Model: LMG95
Serial Number: 11770806
Connectivity: RS-232
Input Connection: Default (20A)
Metrology Institute: PTB (Physikalisch Technische Bundesanstalt)
Accredited by: Atlas Copco Tools Central Europe GmbH
Calibration Label: W13088001
Date of Calibration: 15-Sep-2014
PTDaemon Host System: same as CCS
PTDaemon Host OS: same as CCS
PTDaemon Version: 1.7.0-538b1562-20140802
Setup Description: Connected to PSU 1 and PSU 2
Temperature Sensor temp1
Hardware Vendor: Digi International Inc.
Model: Watchport/H
Driver Version: Watchport Virtual Port 5.70.105.0
Connectivity: USB
PTDaemon Host System: same as CCS
PTDaemon Host OS: same as CCS
Setup Description: 5 mm in front of SUT main air intake
Notes
Aggregate Electrical and Environmental Data
Target Load Average Active Power (W) Minimum Ambient Temperature (°C)
100% 1,152 21.2
90% 1,036 21.2
80% 914 21.2
70% 791 21.1
60% 681 21.1
50% 602 21.1
40% 538 21.1
30% 474 21.1
20% 415 21.1
10% 350 21.1
Active Idle 171 21.0
Line Standard Minimum Temperature (°C) Elevation (m)
230V / 50 Hz / 1 phase / 2 wires 21.0 117
See the Power/Temperature Details Report for additional details.
Aggregate Performance Data
Target Load Actual Load ssj_ops
Target Actual
Calibration 1     12,259,384
Calibration 2     12,896,277
Calibration 3     12,908,904
Calibration 4     12,923,689
ssj_ops@calibrated=12,916,297
100% 100.0% 12,916,297 12,913,912
90% 90.0% 11,624,667 11,626,095
80% 80.0% 10,333,037 10,327,585
70% 70.1% 9,041,408 9,048,447
60% 60.0% 7,749,778 7,752,149
50% 49.9% 6,458,148 6,449,897
40% 40.0% 5,166,519 5,168,294
30% 30.0% 3,874,889 3,878,894
20% 20.0% 2,583,259 2,586,185
10% 10.0% 1,291,630 1,293,707
Active Idle   0 0
Graph of results
See the Aggregate Performance Report for additional details.