Dell Inc. PowerEdge R620 (Intel Xeon E5-2660 v2 2.20 GHz) | SPECpower_ssj2008 = NC overall ssj_ops/watt | ||||
Test Sponsor: | Dell Inc. | SPEC License #: | 55 | Test Method: | Single Node |
Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | Oct 2, 2013 |
Hardware Availability: | Sep-2013 | Software Availability: | Sep-2012 | Publication: | Nov 13, 2013 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Set Identifier: | sut |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | PowerEdge R620 |
Hardware | |
---|---|
Hardware Vendor: | Dell Inc. |
Model: | PowerEdge R620 (Intel Xeon E5-2660 v2 2.20 GHz) |
Form Factor: | 1U |
CPU Name: | Intel Xeon E5-2660 v2 2.20 GHz (Intel Turbo Boost Technology up to 3.00 GHz) |
CPU Characteristics: | 10 core, 2.20GHz, 25MB L3 Cache |
CPU Frequency (MHz): | 2200 |
CPU(s) Enabled: | 20 cores, 2 chips, 10 cores/chip |
Hardware Threads: | 40 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
Tertiary Cache: | 25 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 24 |
# and size of DIMM: | 6 x 4096 MB |
Memory Details: | 4GB 2Rx8 PC3L-12800E-11 ECC, Slots A1-3,B1-3 populated. |
Power Supply Quantity and Rating (W): | 1 x 750 |
Power Supply Details: | Dell P/N XYXMG |
Disk Drive: | 1 x 200GB SATA SSD, Dell P/N 24XV8 |
Disk Controller: | Integrated PERC S110 |
# and type of Network Interface Cards (NICs) Installed: | 2 x Dual-port Broadcom 5720, Dell P/N FM487 |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Balanced power plan in OS, See SUT notes. |
Operating System (OS): | Microsoft Windows Server 2012 Datacenter |
OS Version: | Version 6.2 (Build 9200) |
Filesystem: | NTFS |
JVM Vendor: | IBM Corporation |
JVM Version: | IBM J9 VM (build 2.6,JRE 1.7.0 Windows Server 2008 R2 amd64-64 20120322_106209 (JIT enabled, AOT enabled) |
JVM Command-line Options: | -Xaggressive -Xcompressedrefs -Xmn1400m -Xms1875m -Xmx1875m -XlockReservation -Xnoloa -XtlhPrefetch -Xlp -Xconcurrentlevel0 -Xthr:minimizeusercpu -Xgcthreads4 -Xgc:preferredHeapBase=0x80000000 |
JVM Affinity: | start /affinity [F,F0,F00,F000,F0000,F00000,F000000,F0000000,F00000000,F000000000] |
JVM Instances: | 10 |
JVM Initial Heap (MB): | 1875 |
JVM Maximum Heap (MB): | 1875 |
JVM Address Bits: | 64 |
Boot Firmware Version: | 2.0.19 |
Management Firmware Version: | 1.45.45 (Build 18) |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | IBM SDK Java Technology Edition Version 7.0 for Windows x64 |
Hardware | |
---|---|
Hardware Vendor: | Dell Inc |
Model: | PowerEdge R410 |
CPU Description: | Intel Xeon E5160, 3.00 GHz |
Memory amount (GB): | 8.0 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise Edition Service Pack 1 |
JVM Vendor: | Oracle Corporation |
JVM Version: | Hotspot(TM) Client VM, version 1.6.0_32 |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
Model: | WT210 |
Serial Number: | 91J936840 |
Connectivity: | RS-232 |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | SIMCO |
Calibration Label: | 5974299 |
Date of Calibration: | 13-Feb-2013 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.6.0-7f9b1b00-20130314 |
Setup Description: | Connected to power supply |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.10.26.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 25 mm in front of SUT main airflow intake |