SPECpower_ssj2008 Copyright (C) 2007-2013 Standard Performance Evaluation Corporation Fujitsu PRIMERGY RX200 S8 (Intel Xeon E5-2660 v2) SPECpower_ssj2008 = NC overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Paderborn, NRW, Germany Test Date: Aug 20, 2013 Publication: Oct 2, 2013 Hardware Availability: Nov-2013 Software Availability: Nov-2013 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered SPEC has determined that this result is not in compliance with the SPECpower_ssj2008 run and reporting rules. SPEC has determined that this result is not in compliance with the SPECpower_ssj2008 Run & Reporting Rules 2.10 General Availability. Specifically the submitter generated the results whilst using a combination of Microsoft Windows Server 2012 or 2012 R2 together with the IBM J9 7.0 SR1 virtual machine. IBM has subsequently stated that this combination is unsupported. System Under Test Set: 'RX200 S8' Set Identifier: RX200 S8 Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX200 S8 (Intel Xeon E5-2660 v2) Form Factor: 1U CPU Name: Intel Xeon E5-2660 v2 CPU Characteristics: 10-Core, 2.20GHz, 25MB L3 Cache (Turbo Boost Technology up to 3.0 GHz) CPU Frequency (MHz): 2200 CPU(s) Enabled: 20 cores, 2 chips, 10 cores/chip Hardware Threads: 40 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 25 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 48 # and size of DIMM: 6 x 8192 MB Memory Details: 8 GB 2Rx8 PC3L-12800E-11, ECC; slots 1A, 1B, 1C, 1E, 1F, 1G populated Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: Fujitsu Technology Solutions S26113-F615-E10 Disk Drive: 1 x DOM SATA 3G 64GB Main N H-P, S26361-F3837-L64 Disk Controller: Integrated SATA Controller # and type of Network Interface 2 x Intel I350 Gigabit Network Connection Cards (NICs) Installed: (onboard) NICs Enabled in Firmware / OS / 1/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled ("Fujitsu Enhanced Power Settings" power plan) Operating System (OS): Microsoft Windows Server 2012 Standard OS Version: Version 6.2.9200 Build 9200 Filesystem: NTFS JVM Vendor: IBM Corporation JVM Version: IBM J9 VM (build 2.6, JRE 1.7.0 Windows Server 2008 R2 amd64-64 20120322_106209 (JIT enabled, AOT enabled) JVM Command-line Options: -Xaggressive -Xcompressedrefs -Xgcpolicy:gencon -Xmx1875m -Xms1875m -Xmn1400m -XlockReservation -Xnoloa -XtlhPrefetch -Xlp -Xconcurrentlevel0 -Xthr:minimizeusercpu JVM Affinity: start /NODE [0,1] /AFFINITY [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000 ,0x30000,0xC0000] JVM Instances: 20 JVM Initial Heap (MB): 1875 JVM Maximum Heap (MB): 1875 JVM Address Bits: 64 Boot Firmware Version: R1.0.0 Management Firmware Version: 7.02F Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: IBM SDK Java Technology Edition Version 7.0 for Windows x64, ServerView Agent for Windows, ServerView RAID Manager Boot Firmware Settings * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Line Prefetch = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "DDR Performance = Low-Voltage optimized" in BIOS. (effective memory frequency = 1333 MHz) * Set "Onboard USB Controllers = Disabled" in BIOS. * Set "Power Technology = Custom" in BIOS. * Set "QPI Link Frequency Select = 6.4 GT/s" in BIOS. * Set "QPI Link 1 Disable = Enabled" in BIOS. * Set "Intel Virtualization Technology = Disabled" in BIOS. * Set "ASPM Support = Auto" in BIOS. * Set "DMI Control = Gen1" in BIOS. * Set "LAN Controller = LAN 1" in BIOS. * Set "Onboard SAS/SATA (SCU) = Disabled" in BIOS. Management Firmware Settings None System Under Test Notes * Set "Turn off hard disk after = 1 Minute" in OS. * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Benchmark was started via Windows Remote Desktop Connection. Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX200 S6 CPU Description: Intel Xeon X5680 Memory amount (GB): 48 SOFTWARE Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise SP1 JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: ZES Zimmer Electronic Systems GmbH Model: LMG95 Serial Number: 11210208 Connectivity: RS-232 Input Connection: Default (20A) Metrology Institute: PTB (Physikalisch Technische Bundesanstalt) Accredited by: Kalibrierdienst Stenger Calibration Label: 12084401 Date of Calibration: 24-Aug-2012 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.6.1-ddf12a8b-20130626 Setup Description: Connected to PSU 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes None Copyright (C) 2007-2013 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.9, July 28, 2011]