Fujitsu PRIMERGY RX350 S7 (Intel Xeon E5-2660) | SPECpower_ssj2008 = 5,035 overall ssj_ops/watt | ||||
Test Sponsor: | Fujitsu | SPEC License #: | 19 | Test Method: | Single Node |
Tested By: | Fujitsu | Test Location: | Paderborn, NRW, Germany | Test Date: | May 14, 2012 |
Hardware Availability: | Jun-2012 | Software Availability: | Dec-2011 | Publication: | Jun 27, 2012 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 100.0% | 1,306,867 | 240 | 5,436 |
90% | 90.2% | 1,178,671 | 211 | 5,576 |
80% | 80.1% | 1,046,716 | 180 | 5,825 |
70% | 70.0% | 914,857 | 150 | 6,112 |
60% | 60.1% | 785,258 | 129 | 6,087 |
50% | 50.0% | 653,195 | 114 | 5,755 |
40% | 40.1% | 524,106 | 103 | 5,101 |
30% | 29.9% | 391,081 | 92.8 | 4,216 |
20% | 20.1% | 262,259 | 83.6 | 3,139 |
10% | 10.0% | 131,064 | 73.8 | 1,777 |
Active Idle | 0 | 52.3 | 0 | |
∑ssj_ops / ∑power = | 5,035 |
Set Identifier: | RX350 S7 |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | Single Node |
Hardware | |
---|---|
Hardware Vendor: | Fujitsu |
Model: | PRIMERGY RX350 S7 (Intel Xeon E5-2660) |
Form Factor: | 4U |
CPU Name: | Intel Xeon E5-2660 |
CPU Characteristics: | 8-Core, 2.20GHz, 20MB L3 Cache (Turbo Boost Technology up to 3.0 GHz) |
CPU Frequency (MHz): | 2200 |
CPU(s) Enabled: | 16 cores, 2 chips, 8 cores/chip |
Hardware Threads: | 32 (2 / core) |
CPU(s) Orderable: | 1, 2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
Tertiary Cache: | 20 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 24 |
# and size of DIMM: | 6 x 4096 MB |
Memory Details: | 4 GB 2Rx8 PC3L-12800E-11, ECC; slots 1A, 1B, 1C, 1E, 1F, 1G populated |
Power Supply Quantity and Rating (W): | 1 x 450 |
Power Supply Details: | Fujitsu Technology Solutions S26113-E575-E10 |
Disk Drive: | 1 x 32GB, SSD, 2.5" SATA, S26361-F3298-E320 |
Disk Controller: | Integrated SATA Controller |
# and type of Network Interface Cards (NICs) Installed: | 2 x Intel I350 Gigabit Network Connection (onboard) |
NICs Enabled in Firmware / OS / Connected: | 1/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled ("Fujitsu Enhanced Power Settings" power plan) |
Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise SP1 |
OS Version: | Version 6.1.7601 Service Pack 1 Build 7601 |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM on Windows, version 1.6.0_30 |
JVM Command-line Options: | -server -Xmx1024m -Xms1024m -Xmn853m -XX:ParallelGCThreads=2 -XX:SurvivorRatio=60 -XX:TargetSurvivorRatio=90 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:LoopUnrollLimit=45 -XX:+UseCompressedStrings -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC |
JVM Affinity: | start /affinity [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000,0x30000,0xC0000,0x300000,0xC00000,0x3000000,0xC000000,0x30000000,0xC00000000] |
JVM Instances: | 16 |
JVM Initial Heap (MB): | 1024 |
JVM Maximum Heap (MB): | 1024 |
JVM Address Bits: | 64 |
Boot Firmware Version: | R1.9.0 |
Management Firmware Version: | 6.52A |
Workload Version: | SSJ 1.2.9 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | Fujitsu |
Model: | PRIMERGY RX100 S3 |
CPU Description: | Pentium D 950 |
Memory amount (GB): | 2 |
Software | |
---|---|
Operating System (OS): | Windows Server 2003 Enterprise Edition + SP1 |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle JRockit(R) R27.6.0 (build R27.6.0-50_o-100423-1.6.0_05-20080626-2105-windows-ia32) |
CCS Version: | 1.2.5 |
Power Analyzer pwr2 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT210 |
Serial Number: | 91HA48097 |
Connectivity: | RS-232 |
Input Connection: | Default (20A) |
Metrology Institute: | PTB (Physikalisch Technische Bundesanstalt) |
Accredited by: | Kalibrierdienst Stenger |
Calibration Label: | 11111753 |
Date of Calibration: | 14-Nov-2011 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.4.1-1271fb18-20110728 |
Setup Description: | Connected to PSU 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | Watchport Virtual Port 5.10.26.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main air intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 240 | 20.6 |
90% | 211 | 20.6 |
80% | 180 | 20.5 |
70% | 150 | 20.5 |
60% | 129 | 20.5 |
50% | 114 | 20.4 |
40% | 103 | 20.4 |
30% | 92.8 | 20.4 |
20% | 83.6 | 20.4 |
10% | 73.8 | 20.4 |
Active Idle | 52.3 | 20.5 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
230V / 50 Hz / 1 phase / 2 wires | 20.4 | 117 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 1,298,304 | ||
Calibration 2 | 1,308,172 | ||
Calibration 3 | 1,306,108 | ||
ssj_ops@calibrated=1,307,140 | |||
100% | 100.0% | 1,307,140 | 1,306,867 |
90% | 90.2% | 1,176,426 | 1,178,671 |
80% | 80.1% | 1,045,712 | 1,046,716 |
70% | 70.0% | 914,998 | 914,857 |
60% | 60.1% | 784,284 | 785,258 |
50% | 50.0% | 653,570 | 653,195 |
40% | 40.1% | 522,856 | 524,106 |
30% | 29.9% | 392,142 | 391,081 |
20% | 20.1% | 261,428 | 262,259 |
10% | 10.0% | 130,714 | 131,064 |
Active Idle | 0 | 0 |