SPECpower_ssj2008 Copyright (C) 2007-2012 Standard Performance Evaluation Corporation Fujitsu PRIMERGY TX300 S7 (Intel Xeon E5-2660) SPECpower_ssj2008 = 5,032 overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Paderborn, NRW, Germany Test Date: Jun 12, 2012 Publication: Jun 27, 2012 Hardware Availability: Jun-2012 Software Availability: Dec-2011 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.9% | 1,309,437 | 240 | 5,446 90% | 89.7% | 1,175,162 | 210 | 5,595 80% | 79.5% | 1,041,684 | 178 | 5,860 70% | 69.7% | 912,920 | 150 | 6,100 60% | 59.9% | 784,649 | 129 | 6,067 50% | 50.2% | 657,538 | 115 | 5,741 40% | 40.0% | 523,788 | 103 | 5,070 30% | 30.1% | 394,634 | 93.5 | 4,219 20% | 20.0% | 262,141 | 84.0 | 3,122 10% | 10.0% | 130,576 | 74.1 | 1,762 Active Idle | 0 | 52.6 | 0 sum of ssj_ops / sum of power = | 5,032 System Under Test Set: 'RX350 S7' Set Identifier: RX350 S7 Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY TX300 S7 (Intel Xeon E5-2660) Form Factor: Tower CPU Name: Intel Xeon E5-2660 CPU Characteristics: 8-Core, 2.20GHz, 20MB L3 Cache (Turbo Boost Technology up to 3.0 GHz) CPU Frequency (MHz): 2200 CPU(s) Enabled: 16 cores, 2 chips, 8 cores/chip Hardware Threads: 32 (2 / core) CPU(s) Orderable: 1, 2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 20 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 24 # and size of DIMM: 6 x 4096 MB Memory Details: 4 GB 2Rx8 PC3L-12800E-11, ECC; slots 1A, 1B, 1C, 1E, 1F, 1G populated Power Supply Quantity and Rating 1 x 450 (W): Power Supply Details: Fujitsu Technology Solutions S26113-E575-E10 Disk Drive: 1 x 32GB, SSD, 2.5" SATA, S26361-F3298-E320 Disk Controller: Integrated SATA Controller # and type of Network Interface 2 x Intel I350 Gigabit Network Connection Cards (NICs) Installed: (onboard) NICs Enabled in Firmware / OS / 1/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled ("Fujitsu Enhanced Power Settings" power plan) Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise SP1 OS Version: Version 6.1.7601 Service Pack 1 Build 7601 Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM on Windows, version 1.6.0_30 JVM Command-line Options: -server -Xmx1024m -Xms1024m -Xmn853m -XX:ParallelGCThreads=2 -XX:SurvivorRatio=60 -XX:TargetSurvivorRatio=90 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:LoopUnrollLimit=45 -XX:+UseCompressedStrings -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC JVM Affinity: start /node [0,1] /affinity [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000 ] JVM Instances: 16 JVM Initial Heap (MB): 1024 JVM Maximum Heap (MB): 1024 JVM Address Bits: 64 Boot Firmware Version: R1.9.2 Management Firmware Version: 6.52A Workload Version: SSJ 1.2.9 Director Location: Controller Other Software: None Boot Firmware Settings * Set "Adjacent Sector Prefetch = Disable" in BIOS. * Set "Hardware Prefetch = Disable" in BIOS. * Set "DCU Streamer Prefetch = Disable" in BIOS. * Set "DDR Performance = Low-Voltage optimized" in BIOS. (effective memory frequency = 1066 MHz) * Set "USB Port Control = Enable internal ports only" in BIOS. * Set "QPI Link Speed = 6.4GT/s" in BIOS. * Set "P-State coordination = SW_ANY" in BIOS. * Set "Intel Virtualization Technology = Disable" in BIOS. * Set "SAS/SATA OpROM = LSI MegaRAID" in BIOS. * Set "ASPM Support = Auto" in BIOS. * Set "LAN Port 2 = Disable" in BIOS. Management Firmware Settings None System Under Test Notes * Set "Turn off hard disk after = 1 Minute" in OS. * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Benchmark was started via Windows Remote Desktop Connection. Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX100 S3 CPU Description: Pentium D 950 Memory amount (GB): 2 SOFTWARE Operating System (OS): Windows Server 2003 Enterprise Edition + SP1 JVM Vendor: Oracle Corporation JVM Version: Oracle JRockit(R) R27.6.0 (build R27.6.0-50_o-100423-1.6.0_05-20080626-2105-w indows-ia32) CCS Version: 1.2.5 Measurement Devices POWER ANALYZER PWR2 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91HA48097 Connectivity: RS-232 Input Connection: Default (20A) Metrology Institute: PTB (Physikalisch Technische Bundesanstalt) Accredited by: Kalibrierdienst Stenger Calibration Label: 11111753 Date of Calibration: 14-Nov-2011 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.4.1-1271fb18-20110728 Setup Description: Connected to PSU 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.10.26.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes SPECpower_ssj.props input.load_level.number_warehouses set to 32 due to a known inconsistency in processor reporting with this Java version. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 240 | 20.1 90% | 210 | 20.2 80% | 178 | 20.3 70% | 150 | 20.6 60% | 129 | 20.8 50% | 115 | 20.9 40% | 103 | 21.1 30% | 93.5 | 21.2 20% | 84.0 | 21.4 10% | 74.1 | 21.6 Active Idle | 52.6 | 21.6 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 230V / 50 Hz / 1 phase / | 20.1 | 117 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20120613-00500-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 1,302,014 Calibration 2 | | | 1,310,112 Calibration 3 | | | 1,310,355 ssj_ops@calibrated=1,310,234 100% | 99.9% | 1,310,234 | 1,309,437 90% | 89.7% | 1,179,210 | 1,175,162 80% | 79.5% | 1,048,187 | 1,041,684 70% | 69.7% | 917,164 | 912,920 60% | 59.9% | 786,140 | 784,649 50% | 50.2% | 655,117 | 657,538 40% | 40.0% | 524,094 | 523,788 30% | 30.1% | 393,070 | 394,634 20% | 20.0% | 262,047 | 262,141 10% | 10.0% | 131,023 | 130,576 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20120613-00500.WIN-K1IRTERJUTK.txt) for additional details. Copyright (C) 2007-2012 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.9, July 28, 2011]