NEC Corporation Express5800/R120b-2 | SPECpower_ssj2008 = 2,709 overall ssj_ops/watt | ||||
Test Sponsor: | NEC Corporation | SPEC License #: | 9006 | Test Method: | Single Node |
Tested By: | NEC Corporation | Test Location: | Fuchu, Tokyo, Japan | Test Date: | Feb 2, 2011 |
Hardware Availability: | Feb-2011 | Software Availability: | Sep-2010 | Publication: | Feb 24, 2011 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.5% | 908,306 | 246 | 3,691 |
90% | 90.2% | 823,170 | 230 | 3,586 |
80% | 80.1% | 730,729 | 213 | 3,433 |
70% | 70.1% | 639,716 | 197 | 3,244 |
60% | 59.8% | 545,826 | 181 | 3,014 |
50% | 50.0% | 456,690 | 167 | 2,733 |
40% | 40.0% | 364,752 | 153 | 2,378 |
30% | 29.9% | 273,188 | 140 | 1,949 |
20% | 20.0% | 182,940 | 128 | 1,425 |
10% | 10.0% | 91,052 | 115 | 790 |
Active Idle | 0 | 80.4 | 0 | |
∑ssj_ops / ∑power = | 2,709 |
Set Identifier: | sut |
Set Description: | Express5800/R120b-2 (Intel Xeon X5675, 3.06 GHz) |
# of Identical Nodes: | 1 |
Comment: | None |
Hardware | |
---|---|
Hardware Vendor: | NEC Corporation |
Model: | Express5800/R120b-2 |
Form Factor: | 2U |
CPU Name: | Intel Xeon X5675 |
CPU Characteristics: | Hexa-Core, 3.06 GHz, 12 MB L3 Cache |
CPU Frequency (MHz): | 3066 |
CPU(s) Enabled: | 12 cores, 2 chips, 6 cores/chip |
Hardware Threads: | 24 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
Tertiary Cache: | 12 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 24 |
# and size of DIMM: | 6 x 4096 MB |
Memory Details: | 4GB 2Rx4 PC3L-10600R ECC CL9; slots CPU1_DIMM1, CPU1_DIMM2, CPU1_DIMM3, CPU2_DIMM1, CPU2_DIMM2 and CPU2_DIMM3 populated |
Power Supply Quantity and Rating (W): | 1 x 750 |
Power Supply Details: | Delta DPS-750VB A |
Disk Drive: | 1 x 50GB SSD SATA, NEC P/N:N8150-702 |
Disk Controller: | Integrated SATA controller |
# and type of Network Interface Cards (NICs) Installed: | 1 x Integrated Intel 82576 Gigabit Dual Port Ethernet Controller |
NICs Enabled in Firmware / OS / Connected: | 2/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Power saver |
Operating System (OS): | Microsoft Windows Server 2008 Enterprise x64 Edition |
OS Version: | SP2 |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM on Windows, version 1.6.0_21 Performance Release |
JVM Command-line Options: | -Xms1650m -Xmx1650m -Xmn1450m -XX:+AggressiveOpts -XX:+UseBiasedLocking -XX:+UseStringCache -XX:+OptimizeStringConcat -XX:+UseCompressedStrings -XX:+UseParallelOldGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseCompressedOops -XX:+AlwaysPreTouch -XX:AllocatePrefetchDistance=192 -XX:AllocatePrefetchLines=4 -XX:SurvivorRatio=50 -XX:TargetSurvivorRatio=90 -XX:InlineSmallCode=5500 -XX:MaxInlineSize=220 -XX:FreqInlineSize=2500 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 |
JVM Affinity: | start /affinity [3,C,30,C0,300,C00,3000,C000,30000,C0000,300000,C00000] |
JVM Instances: | 12 |
JVM Initial Heap (MB): | 1650 |
JVM Maximum Heap (MB): | 1650 |
JVM Address Bits: | 64 |
Boot Firmware Version: | 4.6.2C18 |
Management Firmware Version: | 1.28 |
Workload Version: | SSJ 1.2.6 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | NEC Corporation |
Model: | Express5800/R120b-2 |
CPU Description: | Intel Xeon X5670 |
Memory amount (GB): | 4 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2008 Standard Edition Service Pack 2 |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle JRockit(R) (build R28.1.0-123-138454-1.6.0_20-20101014-1351-windows-ia32, compiled mode) |
CCS Version: | 1.2.4 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa Electric International Pte. Ltd. |
Model: | WT210 |
Serial Number: | 91H928025 |
Connectivity: | RS-232C |
Input Connection: | Default |
Calibration Institute: | AIST (National Institute of Advanced Industrial Science and Technology) |
Accredited by: | JQA (Japan Quality Assurance Organization) |
Calibration Label: | 150-02780 |
Date of Calibration: | 8-Sep-2010 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.4.0-7071d9e7 |
Setup Description: | None |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.30.2.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | None |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 246 | 20.5 |
90% | 230 | 20.5 |
80% | 213 | 20.6 |
70% | 197 | 20.6 |
60% | 181 | 20.8 |
50% | 167 | 20.8 |
40% | 153 | 20.8 |
30% | 140 | 20.8 |
20% | 128 | 20.8 |
10% | 115 | 20.9 |
Active Idle | 80.4 | 20.8 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
202V / 50 Hz / 1 phase / 2 wires | 20.5 | 52 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 896,381 | ||
Calibration 2 | 913,343 | ||
Calibration 3 | 912,271 | ||
ssj_ops@calibrated=912,807 | |||
100% | 99.5% | 912,807 | 908,306 |
90% | 90.2% | 821,526 | 823,170 |
80% | 80.1% | 730,246 | 730,729 |
70% | 70.1% | 638,965 | 639,716 |
60% | 59.8% | 547,684 | 545,826 |
50% | 50.0% | 456,404 | 456,690 |
40% | 40.0% | 365,123 | 364,752 |
30% | 29.9% | 273,842 | 273,188 |
20% | 20.0% | 182,561 | 182,940 |
10% | 10.0% | 91,281 | 91,052 |
Active Idle | 0 | 0 |