NEC Corporation Express5800/A1080a-E | SPECpower_ssj2008 = 1,335 overall ssj_ops/watt | ||||
Test Sponsor: | NEC Corporation | SPEC License #: | 9006 | Test Method: | Single Node |
Tested By: | NEC Corporation | Test Location: | Fuchu, Tokyo, Japan | Test Date: | Dec 17, 2010 |
Hardware Availability: | Jan-2011 | Software Availability: | Sep-2010 | Publication: | Jan 26, 2011 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.4% | 3,646,995 | 1,749 | 2,086 |
90% | 90.0% | 3,302,360 | 1,687 | 1,957 |
80% | 80.3% | 2,945,038 | 1,625 | 1,813 |
70% | 70.0% | 2,568,463 | 1,552 | 1,655 |
60% | 60.0% | 2,200,029 | 1,461 | 1,506 |
50% | 50.0% | 1,834,898 | 1,361 | 1,348 |
40% | 39.9% | 1,464,388 | 1,274 | 1,149 |
30% | 30.0% | 1,099,560 | 1,202 | 915 |
20% | 19.9% | 731,784 | 1,134 | 645 |
10% | 10.0% | 366,109 | 1,060 | 346 |
Active Idle | 0 | 993 | 0 | |
∑ssj_ops / ∑power = | 1,335 |
Set Identifier: | sut |
Set Description: | Express5800/A1080a-E (Intel Xeon X7560, 2.26 GHz) |
# of Identical Nodes: | 1 |
Comment: | None |
Hardware | |
---|---|
Hardware Vendor: | NEC Corporation |
Model: | Express5800/A1080a-E |
Form Factor: | 7U |
CPU Name: | Intel Xeon X7560 |
CPU Characteristics: | Octa-Core, 2.26 GHz, 24 MB L3 Cache |
CPU Frequency (MHz): | 2266 |
CPU(s) Enabled: | 64 cores, 8 chips, 8 cores/chip |
Hardware Threads: | 128 (2 / core) |
CPU(s) Orderable: | 8 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
Tertiary Cache: | 24 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 128 |
# and size of DIMM: | 32 x 4096 MB |
Memory Details: | 4GB 2Rx4 PC3-8500R ECC CL7; slots DIMM#1-DIMM#4 populated on each PMM (Processor Memory Module) |
Power Supply Quantity and Rating (W): | 2 x 2200 |
Power Supply Details: | NEC RH1685 |
Disk Drive: | 1 x 300GB 10krpm HDD 2.5inch SAS, NEC P/N:NE3105-104 |
Disk Controller: | 6Gbps SAS RAID Controller for Embedded HDD/SSD, NEC P/N:NE3104-001 |
# and type of Network Interface Cards (NICs) Installed: | 1 x Integrated Intel 82576 Gigabit Dual Port Ethernet Controller |
NICs Enabled in Firmware / OS / Connected: | 2/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | Yes |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Power saver |
Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise |
OS Version: | R2 |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM on Windows, version 1.6.0_21 Performance Release |
JVM Command-line Options: | -Xms14400m -Xmx14400m -Xmn13200m -XX:+AggressiveOpts -XX:+UseBiasedLocking -XX:+UseStringCache -XX:+OptimizeStringConcat -XX:+UseCompressedStrings -XX:+UseParallelOldGC -XX:ParallelGCThreads=16 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseCompressedOops -XX:+AlwaysPreTouch -XX:AllocatePrefetchDistance=192 -XX:AllocatePrefetchLines=4 -XX:SurvivorRatio=50 -XX:TargetSurvivorRatio=90 -XX:InlineSmallCode=5500 -XX:MaxInlineSize=220 -XX:FreqInlineSize=2500 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 |
JVM Affinity: | start /affinity [FFFF,FFFF,FFFF0000,FFFF0000,FFFF00000000,FFFF00000000,FFFF000000000000,FFFF000000000000] |
JVM Instances: | 8 |
JVM Initial Heap (MB): | 14400 |
JVM Maximum Heap (MB): | 14400 |
JVM Address Bits: | 64 |
Boot Firmware Version: | 1.65 |
Management Firmware Version: | 2.0.0.8 |
Workload Version: | SSJ 1.2.6 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | NEC Corporation |
Model: | Express5800/R120a-2 |
CPU Description: | Intel Xeon X5550 |
Memory amount (GB): | 4 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2008 Standard Edition Service Pack 2 |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle JRockit(R) (build R28.0.1-21-133393-1.6.0_20-20100512-2132-windows-ia32, compiled mode) |
CCS Version: | 1.2.4 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa Electric International Pte. Ltd. |
Model: | WT210 |
Serial Number: | 91H928024 |
Connectivity: | RS-232C |
Input Connection: | Default |
Calibration Institute: | AIST (National Institute of Advanced Industrial Science and Technology) |
Accredited by: | JQA (Japan Quality Assurance Organization) |
Calibration Label: | 150-95429 |
Date of Calibration: | 4-Mar-2010 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.4.0-7071d9e7 |
Setup Description: | None |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.30.2.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | None |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 1,749 | 20.4 |
90% | 1,687 | 20.5 |
80% | 1,625 | 20.4 |
70% | 1,552 | 20.4 |
60% | 1,461 | 20.4 |
50% | 1,361 | 20.4 |
40% | 1,274 | 20.3 |
30% | 1,202 | 20.2 |
20% | 1,134 | 20.2 |
10% | 1,060 | 20.2 |
Active Idle | 993 | 20.2 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
202V / 50 Hz / 1 phase / 2 wires | 20.2 | 52 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 3,657,625 | ||
Calibration 2 | 3,677,895 | ||
Calibration 3 | 3,659,407 | ||
ssj_ops@calibrated=3,668,651 | |||
100% | 99.4% | 3,668,651 | 3,646,995 |
90% | 90.0% | 3,301,786 | 3,302,360 |
80% | 80.3% | 2,934,921 | 2,945,038 |
70% | 70.0% | 2,568,056 | 2,568,463 |
60% | 60.0% | 2,201,191 | 2,200,029 |
50% | 50.0% | 1,834,326 | 1,834,898 |
40% | 39.9% | 1,467,460 | 1,464,388 |
30% | 30.0% | 1,100,595 | 1,099,560 |
20% | 19.9% | 733,730 | 731,784 |
10% | 10.0% | 366,865 | 366,109 |
Active Idle | 0 | 0 |