Fujitsu Siemens Computers PRIMERGY RX300 S4 (INTEL Xeon E5440) | SPECpower_ssj2008 = 690 overall ssj_ops/watt | ||||
Test Sponsor: | Fujitsu Siemens Computers | SPEC License #: | 22 | Test Method: | Single Node |
Tested By: | Fujitsu Siemens Computers | Test Location: | Paderborn, Germany | Test Date: | Jan 15, 2008 |
Hardware Availability: | Dec-2007 | Software Availability: | Oct-2007 | Publication: | Jan 30, 2008 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.7% | 303,846 | 265 | 1,146 |
90% | 89.5% | 272,811 | 259 | 1,053 |
80% | 79.7% | 242,870 | 252 | 963 |
70% | 70.0% | 213,115 | 245 | 871 |
60% | 59.8% | 182,251 | 235 | 777 |
50% | 50.2% | 152,917 | 224 | 683 |
40% | 40.3% | 122,829 | 212 | 580 |
30% | 30.0% | 91,425 | 200 | 457 |
20% | 20.1% | 61,124 | 191 | 321 |
10% | 10.1% | 30,902 | 179 | 172 |
Active Idle | 0 | 166 | 0 | |
∑ssj_ops / ∑power = | 690 |
Set Identifier: | sut |
Set Description: | PRIMERGY RX300 S4 (INTEL Xeon E5440) |
# of Identical Nodes: | 1 |
Comment: | None |
Hardware | |
---|---|
Hardware Vendor: | Fujitsu Siemens Computers |
Model: | PRIMERGY RX300 S4 (INTEL Xeon E5440) |
Form Factor: | -- |
CPU Name: | Intel Xeon E5440 |
CPU Characteristics: | 2.83 GHz, 2x6MB L2C, 1333 MHz system bus |
CPU Frequency (MHz): | 2830 |
CPU(s) Enabled: | 8 cores, 2 chips, 4 cores/chip |
Hardware Threads: | 8 (1 / core) |
CPU(s) Orderable: | 1,2 |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 12 MB I+D on chip per chip, 6 MB shared / 2 cores |
Tertiary Cache: | None |
Other Cache: | None |
Memory Amount (GB): | 16 |
# and size of DIMM: | 4x4096MB |
Memory Details: | PC2-5300F 2Rx4 (CAS 5-5-5) |
Power Supply Quantity and Rating (W): | 1 x 700 |
Power Supply Details: | Fujitsu Siemens Computers DPS-700KB A |
Disk Drive: | 1 x Western Digital WD5000AAKS 500GB 7.2 krpm 3.5" SATA |
Disk Controller: | LSI Logic integrated SAS 3000 series, 8-port with 1068E |
# and type of Network Interface Cards (NICs) Installed: | 2 x Broadcom BCM5708C NetXtreme II GigE (onboard) |
NICs Enabled in Firmware / OS / Connected: | 1/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | KVM |
Mouse: | KVM |
Monitor: | KVM |
Optical Drives: | None |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (Server Balanced Power and Performance) |
Operating System (OS): | Microsoft(R) Windows(R) Server 2003 R2 Enterprise x64 Edition |
OS Version: | Version 5.2.3790 Service Pack 1 Build 3790 |
Filesystem: | NTFS |
JVM Vendor: | BEA Systems, Inc. |
JVM Version: | BEA JRockit(R) (build P27.4.0-10-90053-1.6.0_02-20071009-1827-windows-x86_64) |
JVM Command-line Options: | -Xms3600m -Xns3200m -Xmx3600m -Xlargepages -XXaggressive -XXthroughputcompaction -XXlazyunlocking -XXcallprofiling -Xgc:genpar -XXgcthreads=2 -XXtlasize:min=4k,preferred=512k |
JVM Affinity: | start /affinity [03,0c,30,c0] |
JVM Instances: | 8 |
JVM Initial Heap (MB): | 3600 |
JVM Maximum Heap (MB): | 3600 |
JVM Address Bits: | 64 |
Boot Firmware Version: | -- |
Management Firmware Version: | -- |
Workload Version: | SSJ 1.1 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | Fujitsu Siemens Computers |
Model: | PRIMERGY RX100 S3 |
CPU Description: | Pentium D 925 |
Memory amount (GB): | 2 |
Software | |
---|---|
Operating System (OS): | Windows Server 2003 Enterprise Edition SP1 |
JVM Vendor: | BEA Systems, Inc. |
JVM Version: | BEA JRockit(R) (build R27.3.1-1-85830-1.6.0_01-20070716-1248-windows-ia32) |
CCS Version: | 1.1 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Christ-Elektronik GmbH |
Model: | CLM3000 |
Serial Number: | 200707-0044 |
Connectivity: | RS-232 |
Input Connection: | -- |
Calibration Institute: | PTB (Physikalisch Technische Bundesanstalt) |
Accredited by: | DKD (Deutscher Kalibrierdienst) |
Calibration Label: | 00715-07 DKD-K-23801 07-02 |
Date of Calibration: | Feb-13-07 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.1-45c8e665 |
Setup Description: | -- |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | Watchport Virtual Port 4.20.0.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | -- |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 265 | 20.5 |
90% | 259 | 20.5 |
80% | 252 | 20.5 |
70% | 245 | 20.5 |
60% | 235 | 20.5 |
50% | 224 | 20.5 |
40% | 212 | 20.5 |
30% | 200 | 20.5 |
20% | 191 | 20.5 |
10% | 179 | 20.5 |
Active Idle | 166 | 20.5 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
230V / 50 Hz / 1 phase / 2 wires | 20.5 | 117 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 301,450 | ||
Calibration 2 | 304,995 | ||
Calibration 3 | 304,313 | ||
ssj_ops@calibrated=304,654 | |||
100% | 99.7% | 304,654 | 303,846 |
90% | 89.5% | 274,188 | 272,811 |
80% | 79.7% | 243,723 | 242,870 |
70% | 70.0% | 213,258 | 213,115 |
60% | 59.8% | 182,792 | 182,251 |
50% | 50.2% | 152,327 | 152,917 |
40% | 40.3% | 121,861 | 122,829 |
30% | 30.0% | 91,396 | 91,425 |
20% | 20.1% | 60,931 | 61,124 |
10% | 10.1% | 30,465 | 30,902 |
Active Idle | 0 | 0 |