SPEC® OMPG2012 Result

Copyright 2012-2014 Standard Performance Evaluation Corporation

HP (Test Sponsor: Indiana University)

SPECompG_base2012 = 4.74

SPECompG_energy_base2012 = 1.60

HP Proliant DL580 G7 Server Series, Intel Xeon
L7555, 1.87 GHz

SPECompG_peak2012 = Not Run

SPECompG_energy_peak2012 = --

OMP2012 license: 3440A Test date: May-2014
Test sponsor: Indiana University Hardware Availability: Jun-2010
Tested by: Indiana University Software Availability: Aug-2012
Benchmark results graph
Hardware
CPU Name: Intel Xeon L7555
CPU Characteristics: Intel Turbo Boost Technology up to 2.533GHz,
Hyper-Threading off
CPU MHz: 1866
CPU MHz Maximum: 2533
FPU: Integrated
CPU(s) enabled: 32 cores, 4 chips, 8 cores/chip
CPU(s) orderable: 1-4 chips
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 256 KB I+D on chip per core
L3 Cache: 24 MB I+D on chip per chip, 24 MB shared / 8 cores
Other Cache: None
Memory: 512 GB (64 x 8 GB 2Rx4 PC3-10600R-9, ECC)
Disk Subsystem: Two 500 GB 7200 RPM 2.5" SAS hard drives, in RAID
1 mirror
Other Hardware: None
Base Threads Run: 32
Minimum Peak Threads: --
Maximum Peak Threads: --
Software
Operating System: RHEL6.3 (x86_64) 2.6.32-279.5.2.el6
Kernel 2.6.32-279.5.2.el6
2.6.32-431.11.2.el6.x86_64
Compiler: C/C++/Fortran: Version 13.0.0.079 of Intel
Composer XE 2013 for Linux Build 20120731
Auto Parallel: No
File System: NFSv3 (IBM N5500 NAS) over Gb ethernet
System State: Multi-user, run level 3
Base Pointers: 64-bit
Peak Pointers: Not Applicable
Other Software: None
Power
Power Supply: 4 x 1200 W
Power Supply Details: HP 578322-B21 (1200 Watt Hot Plug)
Max. Power (W): 1050.67
Idle Power (W): 677.18
Min. Temperature (C): 22.25
Power Analyzer
Power Analyzer: Power Analyzer
Hardware Vendor: ZES Zimmer
Model: LMG450
Serial Number: 11911308
Input Connection: RS232 via USB-adapter
Metrology Institute: PTB (Physikalisch Technische Bundesanstalt)
Calibration By: ZES Zimmer
Calibration Label: 0431191001
Calibration Date: 08.26.2013
PTDaemon Version: 1.6.2 (372e138a; 2013-12-04)
Setup Description: --
Current Ranges Used: 1.2A, 2.5A
Voltage Range Used: 250V
Temperature Meter
Temperature Meter: Temperature Meter
Hardware Vendor: Digi
Model: Watchport/H
Serial Number: --
Input Connection: USB
PTDaemon Version: 1.6.2 (372e138a; 2013-12-04)
Setup Description: positioned in front of intake fan

Base Results Table

Benchmark Threads Seconds Ratio Energy
(kJ)
Maximum
Power
Average
Power
Energy
Ratio
Seconds Ratio Energy
(kJ)
Maximum
Power
Average
Power
Energy
Ratio
Seconds Ratio Energy
(kJ)
Maximum
Power
Average
Power
Energy
Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
350.md 32 1365   3.39  1090   811   801   1.15  1371   3.38  1100   809   801   1.14  1364   3.39  1090   811   801   1.15 
351.bwaves 32 799   5.67  779   1020   975   1.72  799   5.67  779   1020   975   1.72  799   5.67  779   1020   975   1.72 
352.nab 32 1133   3.43  924   830   816   1.17  1133   3.43  924   831   816   1.17  1134   3.43  925   830   816   1.17 
357.bt331 32 773   6.13  710   1040   919   2.06  773   6.13  710   1040   919   2.06  772   6.14  709   1040   919   2.06 
358.botsalgn 32 1208   3.60  1010   843   834   1.27  1208   3.60  1010   842   835   1.27  1208   3.60  1010   840   835   1.27 
359.botsspar 32 1596   3.29  1350   854   843   1.17  1597   3.29  1350   854   843   1.17  1595   3.29  1350   854   844   1.17 
360.ilbdc 32 1159   3.07  1050   934   906   1.05  1170   3.04  1060   934   905   1.04  1174   3.03  1060   941   905   1.04 
362.fma3d 32 1147   3.31  1000   930   872   1.13  1143   3.32  997   923   872   1.13  1137   3.34  992   929   872   1.14 
363.swim 32 736   6.16  768   1050   1040   1.80  736   6.15  769   1050   1040   1.80  735   6.16  768   1050   1040   1.80 
367.imagick 32 1694   4.15  1390   853   820   1.55  1700   4.13  1400   854   821   1.54  1698   4.14  1390   855   820   1.55 
370.mgrid331 32 853   5.18  892   1050   1050   1.53  854   5.18  893   1050   1050   1.53  853   5.18  892   1050   1050   1.53 
371.applu331 32 586   10.3   556   1010   949   3.34  582   10.4   552   1010   948   3.37  586   10.3   556   1010   948   3.35 
372.smithwa 32 530   10.1   465   891   877   3.94  534   10.0   471   893   882   3.89  529   10.1   464   889   877   3.95 
376.kdtree 32 1036   4.35  882   857   852   1.57  1038   4.33  887   859   854   1.56  1043   4.31  887   856   850   1.56 

Platform Notes

 Sysinfo program /N/soft/mason/omp2012-1.0/omp_runs/Docs/sysinfo
 $Rev: 395 $ $Date:: 2012-07-25 #$ 8f8c0fe9e19c658963a1e67685e50647
 running on c1 Mon May 19 15:52:45 2014

 This section contains SUT (System Under Test) info as seen by
 some common utilities.  To remove or add to this section, see:
   http://www.spec.org/omp2012/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon(R) CPU L7555 @ 1.87GHz
       4 "physical id"s (chips)
       32 "processors"
    cores, siblings (Caution: counting these is hw and system dependent.  The
    following excerpts from /proc/cpuinfo might not be reliable.  Use with
    caution.)
       cpu cores : 8
       siblings  : 8
       physical 0: cores 0 1 2 3 8 9 10 11
       physical 1: cores 0 1 2 3 8 9 10 11
       physical 2: cores 0 1 2 3 8 9 10 11
       physical 3: cores 0 1 2 3 8 9 10 11
    cache size : 24576 KB

 From /proc/meminfo
    MemTotal:       529427584 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 From /etc/*release* /etc/*version*
    redhat-release: Red Hat Enterprise Linux Server release 6.5 (Santiago)
    system-release: Red Hat Enterprise Linux Server release 6.5 (Santiago)
    system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server

 uname -a:
    Linux c1 2.6.32-431.11.2.el6.x86_64 #1 SMP Mon Mar 3 13:32:45 EST 2014 x86_64
    x86_64 x86_64 GNU/Linux

 run-level 3 Apr 24 11:59

 SPEC is set to: /N/soft/mason/omp2012-1.0/omp_runs
    Filesystem        Type  Size  Used Avail Use% Mounted on
    bl-nas2:/vol/soft nfs   1.7T  1.5T  103G  94% /N/soft

 Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'

 (End of data from sysinfo program)

General Notes

 Environment:
      KMP_AFFINITY=compact
      KMP_SCHEDULE=static,balanced
      KMP_BLOCKTIME=infinite
      KMP_LIBRARY=throughput
      KMP_STACKSIZE=31m
      OMP_NESTED=FALSE
      OMP_DYNAMIC=FALSE
      OMP_NUM_THREADS=32

Base Compiler Invocation

C benchmarks:

 icc 

C++ benchmarks:

 icpc 

Fortran benchmarks:

 ifort 

Base Portability Flags

350.md:  -free 
367.imagick:  -std=c99 

Base Optimization Flags

C benchmarks:

 -O3   -xSSE4.2   -ansi-alias   -no-prec-div   -openmp   -shared-intel   -mcmodel=medium   -ipo 

C++ benchmarks:

 -O3   -xSSE4.2   -ansi-alias   -no-prec-div   -openmp   -shared-intel   -mcmodel=medium   -ipo 

Fortran benchmarks:

 -O3   -xSSE4.2   -no-prec-div   -openmp   -shared-intel   -mcmodel=medium   -ipo 

The flags file that was used to format this result can be browsed at
http://www.spec.org/omp2012/flags/Intel-ic13.0-linux64.20131127.html.

You can also download the XML flags source by saving the following link:
http://www.spec.org/omp2012/flags/Intel-ic13.0-linux64.20131127.xml.