|
Hewlett-Packard Company (Test Sponsor: The Portland Group) |
SPECompG_base2012 = 3.73 |
|
ProLiant SL250 |
SPECompG_peak2012 = 3.73 |
| OMP2012 license: | 019 | Test date: | Jan-2013 |
|---|---|---|---|
| Test sponsor: | The Portland Group | Hardware Availability: | Aug-2012 |
| Tested by: | The Portland Group | Software Availability: | Jan-2013 |
| Hardware | |
|---|---|
| CPU Name: | Intel Xeon E5-2670 |
| CPU Characteristics: | Intel Xeon CPU E5-2670 0 @ 2.60 GHz |
| CPU MHz: | 2600 |
| CPU MHz Maximum: | 3300 |
| FPU: | Integrated |
| CPU(s) enabled: | 16 cores, 2 chips, 8 cores/chip, 2 threads/core |
| CPU(s) orderable: | 1-2 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| L3 Cache: | 20 MB I+D on chip per chip |
| Other Cache: | None |
| Memory: | 64 GB (8 x 8GB 2Rx4 PC3L-10600R-9, ECC) |
| Disk Subsystem: | 10 x 144GB, RAID, 10000 RPM |
| Other Hardware: | None |
| Base Threads Run: | 16 |
| Minimum Peak Threads: | 16 |
| Maximum Peak Threads: | 16 |
| Software | |
|---|---|
| Operating System: | Red Hat Enterprise Linux Server release 6.2 (Santiago) 2.6.32-220.el6.x86_64 |
| Compiler: | C/C++/Fortran: Version 13.1 of PGI Server Complete |
| Auto Parallel: | No |
| File System: | nfs |
| System State: | Run level 3 (multi-user) |
| Base Pointers: | 64-bit |
| Peak Pointers: | 64-bit |
| Other Software: | None |
Results Table
| Benchmark | Base | Peak | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Threads | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Threads | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
| 350.md | 16 | 1575 | 2.94 | 1578 | 2.93 | 1573 | 2.94 | 16 | 1575 | 2.94 | 1578 | 2.93 | 1573 | 2.94 |
| 351.bwaves | 16 | 866 | 5.23 | 865 | 5.24 | 863 | 5.25 | 16 | 866 | 5.23 | 865 | 5.24 | 863 | 5.25 |
| 352.nab | 16 | 1524 | 2.55 | 1524 | 2.55 | 1569 | 2.48 | 16 | 1524 | 2.55 | 1524 | 2.55 | 1569 | 2.48 |
| 357.bt331 | 16 | 903 | 5.25 | 903 | 5.25 | 904 | 5.25 | 16 | 903 | 5.25 | 903 | 5.25 | 904 | 5.25 |
| 358.botsalgn | 16 | 1741 | 2.50 | 1741 | 2.50 | 1741 | 2.50 | 16 | 1741 | 2.50 | 1741 | 2.50 | 1741 | 2.50 |
| 359.botsspar | 16 | 1611 | 3.26 | 1613 | 3.26 | 1617 | 3.25 | 16 | 1611 | 3.26 | 1613 | 3.26 | 1617 | 3.25 |
| 360.ilbdc | 16 | 1479 | 2.41 | 1487 | 2.39 | 1483 | 2.40 | 16 | 1479 | 2.41 | 1487 | 2.39 | 1483 | 2.40 |
| 362.fma3d | 16 | 1400 | 2.71 | 1399 | 2.72 | 1390 | 2.73 | 16 | 1400 | 2.71 | 1399 | 2.72 | 1390 | 2.73 |
| 363.swim | 16 | 980 | 4.62 | 983 | 4.61 | 981 | 4.62 | 16 | 980 | 4.62 | 983 | 4.61 | 981 | 4.62 |
| 367.imagick | 16 | 1716 | 4.10 | 1716 | 4.10 | 1732 | 4.06 | 16 | 1716 | 4.10 | 1716 | 4.10 | 1732 | 4.06 |
| 370.mgrid331 | 16 | 1081 | 4.09 | 1080 | 4.09 | 1079 | 4.09 | 16 | 1081 | 4.09 | 1080 | 4.09 | 1079 | 4.09 |
| 371.applu331 | 16 | 1225 | 4.95 | 1227 | 4.94 | 1223 | 4.95 | 16 | 1225 | 4.95 | 1227 | 4.94 | 1223 | 4.95 |
| 372.smithwa | 16 | 1357 | 3.95 | 1335 | 4.02 | 1335 | 4.01 | 16 | 1357 | 3.95 | 1335 | 4.02 | 1335 | 4.01 |
| 376.kdtree | 16 | 748 | 6.02 | 712 | 6.32 | 802 | 5.61 | 16 | 748 | 6.02 | 712 | 6.32 | 802 | 5.61 |
Platform Notes
Sysinfo program /scratch/cparrott/OMP2012_v1.0/Docs/sysinfo $Rev: 395 $ $Date:: 2012-07-25 #$ 8f8c0fe9e19c658963a1e67685e50647 running on node3 Sat Jan 26 09:47:08 2013 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/omp2012/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz 2 "physical id"s (chips) 16 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 8 siblings : 8 physical 0: cores 0 1 2 3 4 5 6 7 physical 1: cores 0 1 2 3 4 5 6 7 cache size : 20480 KB From /proc/meminfo MemTotal: 65932772 kB HugePages_Total: 0 Hugepagesize: 2048 kB /usr/bin/lsb_release -d Red Hat Enterprise Linux Server release 6.2 (Santiago) From /etc/*release* /etc/*version* redhat-release: Red Hat Enterprise Linux Server release 6.2 (Santiago) system-release: Red Hat Enterprise Linux Server release 6.2 (Santiago) system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server uname -a: Linux node3 2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux run-level 3 Jan 8 10:38 SPEC is set to: /scratch/cparrott/OMP2012_v1.0 Filesystem Type Size Used Avail Use% Mounted on filer01.pgi.net:/vol/vol1/scratch nfs 727G 125G 602G 18% /proj/scratch Additional information from dmidecode: (End of data from sysinfo program)
General Notes
Environment variables set by runspec before the start of the run:
MP_BIND = "yes"
MP_SPIN = "1"
Software Environment:
export MP_BIND=yes
export MP_SPIN=1
ulimit -s unlimited
Base Portability Flags
| 350.md: | -Mfree |
| 351.bwaves: | -mcmodel=medium |
| 357.bt331: | -mcmodel=medium |
| 363.swim: | -mcmodel=medium |
Base Optimization Flags
C benchmarks:
| -mp -fast -Mipa=fast -Mipa=inline -Msmartalloc -Mfprelaxed |
C++ benchmarks:
| -mp -fast -Mipa=fast -Mipa=inline -Msmartalloc -Mfprelaxed |
Fortran benchmarks:
| -mp -fast -Mipa=fast -Mipa=inline -Msmartalloc -Mfprelaxed |
Peak Optimization Flags
C benchmarks:
| 352.nab: | basepeak = yes |
| 358.botsalgn: | basepeak = yes |
| 359.botsspar: | basepeak = yes |
| 367.imagick: | basepeak = yes |
| 372.smithwa: | basepeak = yes |
C++ benchmarks:
| 376.kdtree: | basepeak = yes |
Fortran benchmarks:
| 350.md: | basepeak = yes |
| 351.bwaves: | basepeak = yes |
| 357.bt331: | basepeak = yes |
| 360.ilbdc: | basepeak = yes |
| 362.fma3d: | basepeak = yes |
| 363.swim: | basepeak = yes |
| 370.mgrid331: | basepeak = yes |
| 371.applu331: | basepeak = yes |