# Invocation command line: # /home/cpu2017-1.1.8-ic2022.1/bin/harness/runcpu --nobuild --action validate --define default-platform-flags --configfile ic2022.1-lin-core-avx512-speed-20220316.cfg --define cores=56 --tune base --output_format all --define drop_caches --nopower --runmode speed --tune base --size refspeed fpspeed # output_root was not used for this run ############################################################################ #------------------------------------------------------------------------------ # This is a sample SPEC CPU2017 config file. It is applicable for: # # Compiler name/version: Intel(R) C/C++ and Fortran 2021 Compilers for Linux # Operating system version: Red Hat Enterprise Linux 8.4, GLIBC 2.28 # ld version: GNU ld version 2.30 and above (older version may not work) # Hardware: Intel(R) processors supporting CORE-AVX512 tuning # # If you wish to build your own: # (1) Copy this to a new name # cd %SPEC%/config # copy this.cfg that.cfg # (2) Change items that are marked 'EDIT' (search for it) # # If you have different software or hardware, this config file may not work. # You may find a better config file for your system next to posted results: # http://www.spec.org/cpu2017/results # # Compiler issues: Contact your compiler vendor, not SPEC. # For SPEC help: http://www.spec.org/auto/cpu2017/Docs/techsupport.html #------------------------------------------------------------------------------ ### add power options power_analyzer = WIN:9888 temp_meter = WIN:9889 #--------- Preprocessor ------------------------------------------------------- # # Optionally edit if you wish: %define build_ncpus 8 # controls number of simultaneous compiles # Used to date the label %define version 20220316 # Used for the optimization tuning part of the label (not required) %if defined(%{noopt}) %define opt_label -noopt %elif defined(%{medopt}) %define opt_label -medopt %else %define opt_label %endif # Used for labeling static linked builds (not required) %if defined(%{static}) %define static_label -static %else %define static_label %endif #--------- Label -------------------------------------------------------------- # Arbitrary string, tags your binaries & directories. # Two Suggestions: # (1) Change this label as you try new ideas. label = ic2022.1-lin-core-avx512-speed%{opt_label}%{static_label}-%{version} # (2) Make the label meaningful to YOU. #--------- Global Settings ---------------------------------------------------- # For info, see: # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname XXX # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#tune ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'label' to track binaries. # ######################################################## # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate command_add_redirect = 1 line_width = 1020 log_line_width = 1020 makeflags = -j%{build_ncpus} output_format = txt,cfg,pdf,csv preenv = 1 tune = base bench_post_setup = sync parallel_test = 1 mean_anyway = 1 reportable = 1 # Set some environment variables preENV_OMP_STACKSIZE = 192M %ifdef %{intspeedaffinity} preENV_KMP_AFFINITY = granularity=fine,scatter %else %if defined(%{smt-on}) preENV_KMP_AFFINITY = granularity=fine,compact,1,0 %else preENV_KMP_AFFINITY = granularity=fine,compact %endif %endif #Reference the flags files flagsurl000=http://www.spec.org/cpu2017/flags/Lenovo-Platform-SPECcpu2017-Flags-V1.2-Eaglestream-N.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2017/flags/Intel-ic2022-official-linux64_revA.xml %endif # Set some environment variables # Retain unused virtual memory for later reuse. This avoids out of memory errors for certain benchmarks. preENV_MALLOC_CONF = retain:true intspeed: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64:$[top]/je5.0.1-64 fpspeed: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64:$[top]/je5.0.1-64 #--------- Compilers ---------------------------------------------------------- intspeed,fpspeed: CC = icx -m64 -std=c11 CXX = icpx -m64 FC = ifx -m64 # How to say "Show me your version, please" CC_VERSION_OPTION = -V CXX_VERSION_OPTION = -V FC_VERSION_OPTION = -V JEMALLOC32_DIR = /usr/local/jemalloc32-5.0.1/lib JEMALLOC64_DIR = /usr/local/jemalloc64-5.0.1/lib INTEL64_DIR = /usr/local/intel/compiler/2022.1.0/linux/compiler/lib/intel64_lin/ %if !defined(%{static}) JEMALLOC32 = jemalloc JEMALLOC64 = jemalloc QKMALLOC = qkmalloc %else JEMALLOC32 = libjemalloc.a JEMALLOC64 = libjemalloc.a %endif #--------- Portability -------------------------------------------------------- intspeed,fpspeed: PORTABILITY = -DSPEC_LP64 600.perlbench_s: CPORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -convert big_endian 623.xalancbmk_s: CXXPORTABILITY= -DSPEC_LINUX 627.cam4_s: CPORTABILITY= -DSPEC_CASE_FLAG 628.pop2_s: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -convert big_endian -assume byterecl #--------- How Many CPUs? ----------------------------------------------------- # Both SPECrate and SPECspeed can test multiple chips / cores / hw threads # - For SPECspeed, you set the number of threads. # See: https://www.spec.org/cpu2017/Docs/system-requirements.html#MultipleCPUs # # q. How many should I set? # a. Unknown, you will have to try it and see! # # To get you started, some suggestions: # # threads - This config file sets a starting point. You could try raising # it. A higher thread count is much more likely to be useful for # fpspeed than for intspeed. # default: %if !defined(%{cores}) %error please add --define cores=[ncores] to runcpu invocation %endif threads = %{cores} # EDIT to change number of OpenMP threads (see above) %ifdef %{smt-on} %define numpeakthreads %{cores} * 2 %endif intspeed: %define numxzthreads %{cores} * 2 %ifdef %{smt-on} threads = %{numxzthreads} %else threads = %{cores} %endif #-------- Tuning Flags ---------------------------------------------- intrate,fprate: #reconsider using a rate config file instead of a speed config file fail=1 intspeed: SSE = -xCORE-AVX512 EXTRA_FOPTIMIZE = -nostandard-realloc-lhs -align array32byte EXTRA_LIBS = -L$(JEMALLOC64_DIR) -l$(JEMALLOC64) EXTRA_LDFLAGS = -Wl,-z,muldefs intspeed_any_cpp: EXTRA_LIBS = -L$(INTEL64_DIR) -l$(QKMALLOC) EXTRA_LDFLAGS = -Wl,-z,muldefs intspeed=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -O3 -ffast-math -flto -mfpmath=sse -funroll-loops OPT_ROOT_F = -O3 -ffast-math -flto -mfpmath=sse -funroll-loops %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT_F) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSEF) $(OPT_ROOT_F) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -fiopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT_F) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static -fiopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT_F) -static %endif %endif fpspeed: SSE = -xCORE-AVX512 EXTRA_FOPTIMIZE = -nostandard-realloc-lhs -align array32byte -auto EXTRA_LIBS = -L$(JEMALLOC64_DIR) -l$(JEMALLOC64) EXTRA_LDFLAGS = -Wl,-z,muldefs fpspeed=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -Ofast -ffast-math -flto -mfpmath=sse -funroll-loops %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -fiopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(OPT_ROOT) -fiopenmp -DSPEC_OPENMP FOPTIMIZE = $(OPT_ROOT) -fiopenmp -DSPEC_OPENMP %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -fiopenmp -DSPEC_OPENMP -static CXXOPTIMIZE = $(OPT_ROOT) -fiopenmp -DSPEC_OPENMP -static FOPTIMIZE = $(OPT_ROOT) -fiopenmp -DSPEC_OPENMP -static %endif %endif intspeed=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif OPT_ROOT = -O3 -ffast-math -flto -mfpmath=sse -funroll-loops FAST_NO_STATIC = $(SSE) $(OPT_ROOT) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 PASS1_CFLAGS = -fprofile-generate #-xCORE-AVX512 -flto -Ofast PASS2_CFLAGS = -fprofile-use=default.profdata PASS1_FFLAGS = -fprofile-generate #-xCORE-AVX512 -flto -Ofast PASS2_FFLAGS = -fprofile-use=default.profdata PASS1_CXXFLAGS = -fprofile-generate #-xCORE-AVX512 -flto -Ofast PASS2_CXXFLAGS = -fprofile-use=default.profdata PASS1_LDFLAGS = -fprofile-generate #-xCORE-AVX512 -flto -Ofast PASS2_LDFLAGS = -fprofile-use=default.profdata fdo_run1 = $command ; llvm-profdata merge -output=default.profdata *.profraw 600.perlbench_s=peak=default: EXTRA_OPTIMIZE = -fno-strict-overflow 625.x264_s=peak: feedback = 0 EXTRA_OPTIMIZE = -fno-alias 605.mcf_s,620.omnetpp_s,623.xalancbmk_s,631.deepsjeng_s,648.exchange2_s,641.leela_s,657.xz_s=peak: basepeak=1 fpspeed=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif OPT_ROOT = -Ofast -ffast-math -flto -mfpmath=sse -funroll-loops FAST_NO_STATIC = $(SSE) $(OPT_ROOT) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP FOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP PASS1_CFLAGS = -fprofile-generate #-xCORE-AVX512 -flto -Ofast PASS2_CFLAGS = -fprofile-use=default.profdata PASS1_FFLAGS = -fprofile-generate #-xCORE-AVX512 -flto -Ofast PASS2_FFLAGS = -fprofile-use=default.profdata PASS1_CXXFLAGS = -fprofile-generate #-xCORE-AVX512 -flto -Ofast PASS2_CXXFLAGS = -fprofile-use=default.profdata PASS1_LDFLAGS = -fprofile-generate #-xCORE-AVX512 -flto -Ofast PASS2_LDFLAGS = -fprofile-use=default.profdata fdo_run1 = $command ; llvm-profdata merge -output=default.profdata *.profraw 603.bwaves_s,627.cam4_s=peak: feedback = 0 #some benchmarks do not mind sharing cores %ifdef %{smt-on} 628.pop2_s,644.nab_s=peak: threads = %{numpeakthreads} %endif 607.cactuBSSN_s,619.lbm_s,621.wrf_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s,654.roms_s=peak: basepeak=1 #------------------------------------------------------------------------------- # Tester and System Descriptions - EDIT the sections below #------------------------------------------------------------------------------- # For info about any field, see # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#hw_memory #------------------------------------------------------------------------------- #--------- If you install new compilers, EDIT this section -------------------- intrate,intspeed,fpspeed,fprate: sw_compiler000 = C/C++: Version 2022.1 of Intel oneAPI DPC++/C++ sw_compiler001 = Compiler for Linux; sw_compiler002 = Fortran: Version 2022.1 of Intel Fortran Compiler sw_compiler003 = for Linux; sw_base_ptrsize = 64-bit sw_other = jemalloc memory allocator V5.0.1 fprate,fpspeed: sw_peak_ptrsize = Not Applicable intspeed: sw_peak_ptrsize = 64-bit intrate: sw_peak_ptrsize = 32/64-bit #--------- EDIT Your info --------------------------------------------------------- # To understand the difference between hw_vendor/sponsor/tester, see: # www.spec.org/auto/cpu2017/Docs/config.html#test_sponsor intrate,intspeed,fprate,fpspeed: # Important: keep this line hw_vendor = Lenovo Global Technology tester = Lenovo Global Technology test_sponsor = Lenovo Global Technology license_num = 9017 prepared_by = Lenovo Global Technology #--------- EDIT system availability dates and system information ---------------------------------------------- intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field hw_avail = Feb-2023 sw_avail = Jun-2022 hw_cpu_nominal_mhz = 2000 hw_cpu_max_mhz = 4100 hw_ncores = 56 hw_nthreadspercore = 1 hw_ncpuorder = 1,2 chips hw_model000 = ThinkSystem SR630 V3 hw_model001 = (2.00 GHz, Intel Xeon Gold 5420+) hw_other = None # sw_other = # TurboHeap Library V8.1 # Other perf-relevant sw, or "None" hw_pcache = 32 KB I + 48 KB D on chip per core hw_scache = 2 MB I+D on chip per core hw_tcache = 52.5 MB I+D on chip per chip hw_ocache = None # hw_memory001 = # 4 TB (256 x 16 GB 2Rx4 PC4-2133P-R, # N GB (M x N GB nRxn # hw_memory002 = # running at 1600 MHz) # PCn-nnnnnR-n[, ECC and other info]) #--------- Sysinfo fields - You may need to adjust this section --------------- # Note: Some commented-out fields above are automatically set to preliminary # values by sysinfo # www.spec.org/auto/cpu2017/Docs/config.html#sysinfo # Uncomment lines for which you already have a better answer than sysinfo # intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field # hw_cpu_name = # Intel Xeon E9-9999 v9 # chip name # hw_disk = # 9 x 9 TB SATA III 9999 RPM # Size, type, other perf-relevant info # hw_nchips = # 99 # number chips enabled # sw_file = # ext99 # File system # sw_state = # Run level 99 # Software state. # sw_os001 = # Linux Sailboat # Operating system # sw_os002 = # Distribution 7.2 SP1 # and version #--------- EDIT Intel Recommended Fields - You may wish to adjust this section ----- default: notes_000 = Binaries compiled on a system with 2x Intel Xeon Platinum 8280M CPU + 384GB RAM notes_005 = memory using Redhat Enterprise Linux 8.0 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" #Ease of tagging results from the runcpu command line with commands run outside of runcpu harneess #Adjust as necessary for your SUT %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_010 = Transparent Huge Pages enabled by default %endif %ifdef %{drop_caches} notes_015 = Prior to runcpu invocation notes_020 = Filesystem page cache synced and cleared with: notes_025 = sync; echo 3> /proc/sys/vm/drop_caches notes_030 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_035 =is mitigated in the system as tested and documented. notes_040 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_045 =is mitigated in the system as tested and documented. notes_050 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_055 =is mitigated in the system as tested and documented. %endif %ifdef %{invoke_with_interleave} notes_205 = runcpu command invoked through numactl i.e.: notes_206 = numactl --interleave=all runcpu %endif intrate,fprate: %if defined(%{no-numa}) notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %else notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %endif intrate,fprate,intspeed,fpspeed: notes_jemalloc_000 = jemalloc, a general purpose malloc implementation notes_jemalloc_005 = built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5 notes_jemalloc_010 = sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:679c83684f6f4fc369a093999b6661d0a378911de2a006d3245423ad80d3fb9a) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/cpu2017-1.1.8-ic2022.1/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d notes_plat_sysinfo_015 = running on localhost Sat Jan 28 17:21:57 2023 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = For more information on this section, see notes_plat_sysinfo_035 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) Gold 5420+ notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 56 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_070 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_075 = cpu cores : 28 notes_plat_sysinfo_080 = siblings : 28 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 notes_plat_sysinfo_090 = 25 26 27 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 notes_plat_sysinfo_100 = 25 26 27 notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From lscpu from util-linux 2.37.2: notes_plat_sysinfo_115 = Architecture: x86_64 notes_plat_sysinfo_120 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_125 = Address sizes: 46 bits physical, 57 bits virtual notes_plat_sysinfo_130 = Byte Order: Little Endian notes_plat_sysinfo_135 = CPU(s): 56 notes_plat_sysinfo_140 = On-line CPU(s) list: 0-55 notes_plat_sysinfo_145 = Vendor ID: GenuineIntel notes_plat_sysinfo_150 = Model name: Intel(R) Xeon(R) Gold 5420+ notes_plat_sysinfo_155 = CPU family: 6 notes_plat_sysinfo_160 = Model: 143 notes_plat_sysinfo_165 = Thread(s) per core: 1 notes_plat_sysinfo_170 = Core(s) per socket: 28 notes_plat_sysinfo_175 = Socket(s): 2 notes_plat_sysinfo_180 = Stepping: 8 notes_plat_sysinfo_185 = BogoMIPS: 4000.00 notes_plat_sysinfo_190 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr notes_plat_sysinfo_195 = pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx notes_plat_sysinfo_200 = pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology notes_plat_sysinfo_205 = nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx notes_plat_sysinfo_210 = smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt notes_plat_sysinfo_215 = tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault notes_plat_sysinfo_220 = epb cat_l3 cat_l2 cdp_l3 invpcid_single intel_ppin cdp_l2 ssbd mba ibrs ibpb stibp notes_plat_sysinfo_225 = ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 notes_plat_sysinfo_230 = hle avx2 smep bmi2 erms invpcid rtm cqm rdt_a avx512f avx512dq rdseed adx smap notes_plat_sysinfo_235 = avx512ifma clflushopt clwb intel_pt avx512cd sha_ni avx512bw avx512vl xsaveopt notes_plat_sysinfo_240 = xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_245 = split_lock_detect avx_vnni avx512_bf16 wbnoinvd dtherm ida arat pln pts avx512vbmi notes_plat_sysinfo_250 = umip pku ospke waitpkg avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg notes_plat_sysinfo_255 = tme avx512_vpopcntdq la57 rdpid bus_lock_detect cldemote movdiri movdir64b enqcmd notes_plat_sysinfo_260 = fsrm md_clear serialize tsxldtrk pconfig arch_lbr avx512_fp16 amx_tile flush_l1d notes_plat_sysinfo_265 = arch_capabilities notes_plat_sysinfo_270 = Virtualization: VT-x notes_plat_sysinfo_275 = L1d cache: 2.6 MiB (56 instances) notes_plat_sysinfo_280 = L1i cache: 1.8 MiB (56 instances) notes_plat_sysinfo_285 = L2 cache: 112 MiB (56 instances) notes_plat_sysinfo_290 = L3 cache: 105 MiB (2 instances) notes_plat_sysinfo_295 = NUMA node(s): 2 notes_plat_sysinfo_300 = NUMA node0 CPU(s): 0-27 notes_plat_sysinfo_305 = NUMA node1 CPU(s): 28-55 notes_plat_sysinfo_310 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_315 = Vulnerability L1tf: Not affected notes_plat_sysinfo_320 = Vulnerability Mds: Not affected notes_plat_sysinfo_325 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_330 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via notes_plat_sysinfo_335 = prctl and seccomp notes_plat_sysinfo_340 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user notes_plat_sysinfo_345 = pointer sanitization notes_plat_sysinfo_350 = Vulnerability Spectre v2: Mitigation; Enhanced IBRS, IBPB conditional, RSB notes_plat_sysinfo_355 = filling notes_plat_sysinfo_360 = Vulnerability Srbds: Not affected notes_plat_sysinfo_365 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_370 = notes_plat_sysinfo_375 = From lscpu --cache: notes_plat_sysinfo_380 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_385 = L1d 48K 2.6M 12 Data 1 64 1 64 notes_plat_sysinfo_390 = L1i 32K 1.8M 8 Instruction 1 64 1 64 notes_plat_sysinfo_395 = L2 2M 112M 16 Unified 2 2048 1 64 notes_plat_sysinfo_400 = L3 52.5M 105M 15 Unified 3 57344 1 64 notes_plat_sysinfo_405 = notes_plat_sysinfo_410 = /proc/cpuinfo cache data notes_plat_sysinfo_415 = cache size : 53760 KB notes_plat_sysinfo_420 = notes_plat_sysinfo_425 = From numactl --hardware notes_plat_sysinfo_430 = WARNING: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_435 = available: 2 nodes (0-1) notes_plat_sysinfo_440 = node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 notes_plat_sysinfo_445 = node 0 size: 257704 MB notes_plat_sysinfo_450 = node 0 free: 256872 MB notes_plat_sysinfo_455 = node 1 cpus: 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 notes_plat_sysinfo_460 = 53 54 55 notes_plat_sysinfo_465 = node 1 size: 257986 MB notes_plat_sysinfo_470 = node 1 free: 257279 MB notes_plat_sysinfo_475 = node distances: notes_plat_sysinfo_480 = node 0 1 notes_plat_sysinfo_485 = 0: 10 21 notes_plat_sysinfo_490 = 1: 21 10 notes_plat_sysinfo_495 = notes_plat_sysinfo_500 = From /proc/meminfo notes_plat_sysinfo_505 = MemTotal: 528067892 kB notes_plat_sysinfo_510 = HugePages_Total: 0 notes_plat_sysinfo_515 = Hugepagesize: 2048 kB notes_plat_sysinfo_520 = notes_plat_sysinfo_525 = From /etc/*release* /etc/*version* notes_plat_sysinfo_530 = os-release: notes_plat_sysinfo_535 = NAME="SLES" notes_plat_sysinfo_540 = VERSION="15-SP4" notes_plat_sysinfo_545 = VERSION_ID="15.4" notes_plat_sysinfo_550 = PRETTY_NAME="SUSE Linux Enterprise Server 15 SP4" notes_plat_sysinfo_555 = ID="sles" notes_plat_sysinfo_560 = ID_LIKE="suse" notes_plat_sysinfo_565 = ANSI_COLOR="0;32" notes_plat_sysinfo_570 = CPE_NAME="cpe:/o:suse:sles:15:sp4" notes_plat_sysinfo_575 = notes_plat_sysinfo_580 = uname -a: notes_plat_sysinfo_585 = Linux localhost 5.14.21-150400.22-default #1 SMP PREEMPT_DYNAMIC Wed May 11 06:57:18 notes_plat_sysinfo_590 = UTC 2022 (49db222) x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_595 = notes_plat_sysinfo_600 = Kernel self-reported vulnerability status: notes_plat_sysinfo_605 = notes_plat_sysinfo_610 = CVE-2018-12207 (iTLB Multihit): Not affected notes_plat_sysinfo_615 = CVE-2018-3620 (L1 Terminal Fault): Not affected notes_plat_sysinfo_620 = Microarchitectural Data Sampling: Not affected notes_plat_sysinfo_625 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_630 = CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store notes_plat_sysinfo_635 = Bypass disabled via prctl and notes_plat_sysinfo_640 = seccomp notes_plat_sysinfo_645 = CVE-2017-5753 (Spectre variant 1): Mitigation: usercopy/swapgs notes_plat_sysinfo_650 = barriers and __user pointer notes_plat_sysinfo_655 = sanitization notes_plat_sysinfo_660 = CVE-2017-5715 (Spectre variant 2): Mitigation: Enhanced IBRS, IBPB: notes_plat_sysinfo_665 = conditional, RSB filling notes_plat_sysinfo_670 = CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected notes_plat_sysinfo_675 = CVE-2019-11135 (TSX Asynchronous Abort): Not affected notes_plat_sysinfo_680 = notes_plat_sysinfo_685 = run-level 3 Jan 28 17:19 notes_plat_sysinfo_690 = notes_plat_sysinfo_695 = SPEC is set to: /home/cpu2017-1.1.8-ic2022.1 notes_plat_sysinfo_700 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_705 = /dev/sda2 xfs 894G 25G 870G 3% / notes_plat_sysinfo_710 = notes_plat_sysinfo_715 = From /sys/devices/virtual/dmi/id notes_plat_sysinfo_720 = Vendor: Lenovo notes_plat_sysinfo_725 = Product: ThinkSystem SR630 V3 MB,EGS,DDR5,NY,1U notes_plat_sysinfo_730 = Product Family: ThinkSystem notes_plat_sysinfo_735 = Serial: 1234567890 notes_plat_sysinfo_740 = notes_plat_sysinfo_745 = Additional information from dmidecode 3.2 follows. WARNING: Use caution when you notes_plat_sysinfo_750 = interpret this section. The 'dmidecode' program reads system data which is "intended to notes_plat_sysinfo_755 = allow hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_760 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_765 = Memory: notes_plat_sysinfo_770 = 2x Samsung M321R4GA3BB0-CQKMG 32 GB 2 rank 4800, configured at 4400 notes_plat_sysinfo_775 = 14x Samsung M321R4GA3BB0-CQKVG 32 GB 2 rank 4800, configured at 4400 notes_plat_sysinfo_780 = notes_plat_sysinfo_785 = BIOS: notes_plat_sysinfo_790 = BIOS Vendor: Lenovo notes_plat_sysinfo_795 = BIOS Version: ESE109L-1.10 notes_plat_sysinfo_800 = BIOS Date: 01/07/2023 notes_plat_sysinfo_805 = BIOS Revision: 1.10 notes_plat_sysinfo_810 = Firmware Revision: 1.0 notes_plat_sysinfo_815 = notes_plat_sysinfo_820 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon Gold 5420+ hw_disk = 1 x 960 GB SATA SSD hw_memory000 = 512 GB (16 x 32 GB 2Rx8 PC5-4800B-R, running at hw_memory001 = 4400) hw_nchips = 2 prepared_by = root (is never output, only tags rawfile) fw_bios = Lenovo BIOS Version ESE109L 1.10 released Jan-2023 sw_file = xfs sw_os000 = SUSE Linux Enterprise Server 15 SP4 (x86_64) sw_os001 = Kernel 5.14.21-150400.22-default sw_state = Run level 3 (multi-user) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: power_management000 = BIOS and OS set to prefer performance at the cost power_management001 = of additional power usage notes_plat_form_000 =BIOS configuration: notes_plat_form_005 =Choose Operating Mode set to Maximum Performance and then set it to Custom Mode notes_plat_form_010 =Hyper-Threading set to Disabled notes_plat_form_015 =C-state set to Legacy