CPU2006 Flag Description
Hewlett-Packard Company HP Integrity rx3600 (1.4GHz/12MB Dual-Core Intel Itanium 2)

Base Optimization Flags

C benchmarks

• • +Ofaster
  • 
  • hp_cc,hp_aCC,hp_f90
  • COPTIMIZE

  • This option selects +Ofast, but with the optimization level increased to +O4.

  • Includes:
    • +Ofast
      • +O2
        • +O1
      • +Onolimit
      • +Ofltacc=relaxed
      • +DSnative
      • +FPD
      • -Wl,+pi,1M
      • -Wl,+pd,1M
      • +mergeseg
    • +O4
      • +O3
        • +O2
          • +O1
      • -ipo
• • +Otype_safety=ansi
  • 
  • hp_cc,hp_aCC
  • COPTIMIZE

  • Enable [disable] aliasing across types.

    • off - The default. Specifies that aliasing can occur freely across types. This is a synonym to +Onoptrs_ansi and +Onoptrs_strongly_typed options in legacy cc.
    • limited - Code follows ANSI aliasing rules. Unnamed objects should be treated as if they had an unknown type.
    • ansi - Code follows ANSI aliasing rules, and unnamed objects should be treated the same as named objects. This option is synonym to +Optrs_ansi option in legacy cc.
    • strong - Code follows ANSI aliasing rules, except that accesses through lvalues of a character type are not permitted to touch objects of other types. This assumes that field addresses are not taken. This option is synonym to +Optrs_strongly_typed option in legacy cc.
• • -Wl,-a,archive_shared
  • 
  • COPTIMIZE

  • Specifies whether shared or archive libraries are searched with the -l option. For archive_shared, the archive form is preferred, but the shared form is allowed.

• • -Wl,+pd,64M
  • 
  • COPTIMIZE

  • Request a particular virtual memory page size that should be used for data. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • -Wl,+pi,64M
  • 
  • COPTIMIZE

  • Request a particular virtual memory page size that should be used for instructions. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • -Wl,-N
  • 
  • EXTRA_LDFLAGS

  • In 32-bit mode only, cause the data to be placed immediately following the text, and make the text writable. Files of this type cannot be shared.

C++ benchmarks

• • +Ofaster
  • 
  • hp_cc,hp_aCC,hp_f90
  • CXXOPTIMIZE

  • This option selects +Ofast, but with the optimization level increased to +O4.

  • Includes:
    • +Ofast
      • +O2
        • +O1
      • +Onolimit
      • +Ofltacc=relaxed
      • +DSnative
      • +FPD
      • -Wl,+pi,1M
      • -Wl,+pd,1M
      • +mergeseg
    • +O4
      • +O3
        • +O2
          • +O1
      • -ipo
• • +Otype_safety=ansi
  • 
  • hp_cc,hp_aCC
  • CXXOPTIMIZE

  • Enable [disable] aliasing across types.

    • off - The default. Specifies that aliasing can occur freely across types. This is a synonym to +Onoptrs_ansi and +Onoptrs_strongly_typed options in legacy cc.
    • limited - Code follows ANSI aliasing rules. Unnamed objects should be treated as if they had an unknown type.
    • ansi - Code follows ANSI aliasing rules, and unnamed objects should be treated the same as named objects. This option is synonym to +Optrs_ansi option in legacy cc.
    • strong - Code follows ANSI aliasing rules, except that accesses through lvalues of a character type are not permitted to touch objects of other types. This assumes that field addresses are not taken. This option is synonym to +Optrs_strongly_typed option in legacy cc.
• • -Wl,-a,archive_shared
  • 
  • CXXOPTIMIZE

  • Specifies whether shared or archive libraries are searched with the -l option. For archive_shared, the archive form is preferred, but the shared form is allowed.

• • -Wl,+pd,64M
  • 
  • CXXOPTIMIZE

  • Request a particular virtual memory page size that should be used for data. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • -Wl,+pi,64M
  • 
  • CXXOPTIMIZE

  • Request a particular virtual memory page size that should be used for instructions. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • -Wl,-N
  • 
  • EXTRA_LDFLAGS

  • In 32-bit mode only, cause the data to be placed immediately following the text, and make the text writable. Files of this type cannot be shared.

• • /usr/lib/hpux32/libCsup.a /opt/smartheap/SmartHeap_8/lib/libsmartheap.a
  • 
  • EXTRA_CXXLIBS

  • Link with SmartHeap library. Note: the HP-UX C support library must included first on the link line.

Peak Optimization Flags

C benchmarks

400.perlbench

• • +Oprofile=collect:all
  • 
  • hp_cc,hp_aCC,hp_f90
  • PASS1_CFLAGS, PASS1_LDCFLAGS

  • Instrument the application to enable collection of profile based optimization data. Qualifiers are a comma-separated list of profile collection qualifiers. The profile collection qualifiers are:

    • arc - Enable collection of arc counts.
    • dcache - Enable collection of data cache misses via hardware performance counters.
    • stride - Enable collection of stride data.
    • loopiter - Enable collection of loop iteration counts.
    • all - Enable collection of all types of profile data. Equivalent to the command +Oprofile=collect:arc,dcache,stride,loopiter.
• • +Oprofile=use
  • 
  • hp_cc,hp_aCC,hp_f90
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Examine the profile database file produced by an instrumented program to perform profile based optimizations on the code. Some optimizations are only enabled when a feedback data file is available.

• • +Ofaster
  • 
  • hp_cc,hp_aCC,hp_f90
  • COPTIMIZE

  • This option selects +Ofast, but with the optimization level increased to +O4.

  • Includes:
    • +Ofast
      • +O2
        • +O1
      • +Onolimit
      • +Ofltacc=relaxed
      • +DSnative
      • +FPD
      • -Wl,+pi,1M
      • -Wl,+pd,1M
      • +mergeseg
    • +O4
      • +O3
        • +O2
          • +O1
      • -ipo
• • +Otype_safety=ansi
  • 
  • hp_cc,hp_aCC
  • COPTIMIZE

  • Enable [disable] aliasing across types.

    • off - The default. Specifies that aliasing can occur freely across types. This is a synonym to +Onoptrs_ansi and +Onoptrs_strongly_typed options in legacy cc.
    • limited - Code follows ANSI aliasing rules. Unnamed objects should be treated as if they had an unknown type.
    • ansi - Code follows ANSI aliasing rules, and unnamed objects should be treated the same as named objects. This option is synonym to +Optrs_ansi option in legacy cc.
    • strong - Code follows ANSI aliasing rules, except that accesses through lvalues of a character type are not permitted to touch objects of other types. This assumes that field addresses are not taken. This option is synonym to +Optrs_strongly_typed option in legacy cc.
• • -Wl,-a,archive_shared
  • 
  • COPTIMIZE

  • Specifies whether shared or archive libraries are searched with the -l option. For archive_shared, the archive form is preferred, but the shared form is allowed.

• • -Wl,+pd,64M
  • 
  • COPTIMIZE

  • Request a particular virtual memory page size that should be used for data. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • -Wl,+pi,64M
  • 
  • COPTIMIZE

  • Request a particular virtual memory page size that should be used for instructions. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • -Wl,-N
  • 
  • EXTRA_LDFLAGS

  • In 32-bit mode only, cause the data to be placed immediately following the text, and make the text writable. Files of this type cannot be shared.

401.bzip2

• • Same as 400.perlbench

403.gcc

• • Same as 400.perlbench

429.mcf

• • Same as 400.perlbench

445.gobmk

• • +Oprofile=collect:all
  • 
  • hp_cc,hp_aCC,hp_f90
  • PASS1_CFLAGS, PASS1_LDCFLAGS

  • Instrument the application to enable collection of profile based optimization data. Qualifiers are a comma-separated list of profile collection qualifiers. The profile collection qualifiers are:

    • arc - Enable collection of arc counts.
    • dcache - Enable collection of data cache misses via hardware performance counters.
    • stride - Enable collection of stride data.
    • loopiter - Enable collection of loop iteration counts.
    • all - Enable collection of all types of profile data. Equivalent to the command +Oprofile=collect:arc,dcache,stride,loopiter.
• • +Oprofile=use
  • 
  • hp_cc,hp_aCC,hp_f90
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Examine the profile database file produced by an instrumented program to perform profile based optimizations on the code. Some optimizations are only enabled when a feedback data file is available.

• • +Ofaster
  • 
  • hp_cc,hp_aCC,hp_f90
  • COPTIMIZE

  • This option selects +Ofast, but with the optimization level increased to +O4.

  • Includes:
    • +Ofast
      • +O2
        • +O1
      • +Onolimit
      • +Ofltacc=relaxed
      • +DSnative
      • +FPD
      • -Wl,+pi,1M
      • -Wl,+pd,1M
      • +mergeseg
    • +O4
      • +O3
        • +O2
          • +O1
      • -ipo
• • +Otype_safety=ansi
  • 
  • hp_cc,hp_aCC
  • COPTIMIZE

  • Enable [disable] aliasing across types.

    • off - The default. Specifies that aliasing can occur freely across types. This is a synonym to +Onoptrs_ansi and +Onoptrs_strongly_typed options in legacy cc.
    • limited - Code follows ANSI aliasing rules. Unnamed objects should be treated as if they had an unknown type.
    • ansi - Code follows ANSI aliasing rules, and unnamed objects should be treated the same as named objects. This option is synonym to +Optrs_ansi option in legacy cc.
    • strong - Code follows ANSI aliasing rules, except that accesses through lvalues of a character type are not permitted to touch objects of other types. This assumes that field addresses are not taken. This option is synonym to +Optrs_strongly_typed option in legacy cc.
• • -Wl,-a,archive_shared
  • 
  • COPTIMIZE

  • Specifies whether shared or archive libraries are searched with the -l option. For archive_shared, the archive form is preferred, but the shared form is allowed.

• • -Wl,+pd,64M
  • 
  • COPTIMIZE

  • Request a particular virtual memory page size that should be used for data. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • -Wl,+pi,64M
  • 
  • COPTIMIZE

  • Request a particular virtual memory page size that should be used for instructions. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • +Odataprefetch=direct
  • 
  • COPTIMIZE

  • +Odataprefetch=kind

    Control generation of data prefetch instructions for data structures referenced within innermost loops. The defined values for kind are:

    • direct - Enable generation of data prefetch instructions for the benefit of direct memory accesses, but not indirect memory accesses.
    • indirect - Enable generation of data prefetch instructions for the benefit of both direct and indirect memory accesses. This is the default at optimization levels +O2 and above.
    • none - Disable generation of data prefetch instructions. This is the default at optimization levels +O1 and below.

456.hmmer

• • +Oprofile=collect:all
  • 
  • hp_cc,hp_aCC,hp_f90
  • PASS1_CFLAGS, PASS1_LDCFLAGS

  • Instrument the application to enable collection of profile based optimization data. Qualifiers are a comma-separated list of profile collection qualifiers. The profile collection qualifiers are:

    • arc - Enable collection of arc counts.
    • dcache - Enable collection of data cache misses via hardware performance counters.
    • stride - Enable collection of stride data.
    • loopiter - Enable collection of loop iteration counts.
    • all - Enable collection of all types of profile data. Equivalent to the command +Oprofile=collect:arc,dcache,stride,loopiter.
• • +Oprofile=use
  • 
  • hp_cc,hp_aCC,hp_f90
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Examine the profile database file produced by an instrumented program to perform profile based optimizations on the code. Some optimizations are only enabled when a feedback data file is available.

• • +Ofaster
  • 
  • hp_cc,hp_aCC,hp_f90
  • COPTIMIZE

  • This option selects +Ofast, but with the optimization level increased to +O4.

  • Includes:
    • +Ofast
      • +O2
        • +O1
      • +Onolimit
      • +Ofltacc=relaxed
      • +DSnative
      • +FPD
      • -Wl,+pi,1M
      • -Wl,+pd,1M
      • +mergeseg
    • +O4
      • +O3
        • +O2
          • +O1
      • -ipo
• • +Otype_safety=ansi
  • 
  • hp_cc,hp_aCC
  • COPTIMIZE

  • Enable [disable] aliasing across types.

    • off - The default. Specifies that aliasing can occur freely across types. This is a synonym to +Onoptrs_ansi and +Onoptrs_strongly_typed options in legacy cc.
    • limited - Code follows ANSI aliasing rules. Unnamed objects should be treated as if they had an unknown type.
    • ansi - Code follows ANSI aliasing rules, and unnamed objects should be treated the same as named objects. This option is synonym to +Optrs_ansi option in legacy cc.
    • strong - Code follows ANSI aliasing rules, except that accesses through lvalues of a character type are not permitted to touch objects of other types. This assumes that field addresses are not taken. This option is synonym to +Optrs_strongly_typed option in legacy cc.
• • -Wl,-a,archive_shared
  • 
  • COPTIMIZE

  • Specifies whether shared or archive libraries are searched with the -l option. For archive_shared, the archive form is preferred, but the shared form is allowed.

• • -Wl,+pd,64M
  • 
  • COPTIMIZE

  • Request a particular virtual memory page size that should be used for data. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • -Wl,+pi,64M
  • 
  • COPTIMIZE

  • Request a particular virtual memory page size that should be used for instructions. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

458.sjeng

• • Same as 445.gobmk

462.libquantum

• • Same as 456.hmmer

464.h264ref

• • basepeak = yes

C++ benchmarks

471.omnetpp

• • +Oprofile=collect:all
  • 
  • hp_cc,hp_aCC,hp_f90
  • PASS1_CXXFLAGS, PASS1_LDCXXFLAGS

  • Instrument the application to enable collection of profile based optimization data. Qualifiers are a comma-separated list of profile collection qualifiers. The profile collection qualifiers are:

    • arc - Enable collection of arc counts.
    • dcache - Enable collection of data cache misses via hardware performance counters.
    • stride - Enable collection of stride data.
    • loopiter - Enable collection of loop iteration counts.
    • all - Enable collection of all types of profile data. Equivalent to the command +Oprofile=collect:arc,dcache,stride,loopiter.
• • +Oprofile=use
  • 
  • hp_cc,hp_aCC,hp_f90
  • PASS2_CXXFLAGS, PASS2_LDCXXFLAGS

  • Examine the profile database file produced by an instrumented program to perform profile based optimizations on the code. Some optimizations are only enabled when a feedback data file is available.

• • +Ofaster
  • 
  • hp_cc,hp_aCC,hp_f90
  • CXXOPTIMIZE

  • This option selects +Ofast, but with the optimization level increased to +O4.

  • Includes:
    • +Ofast
      • +O2
        • +O1
      • +Onolimit
      • +Ofltacc=relaxed
      • +DSnative
      • +FPD
      • -Wl,+pi,1M
      • -Wl,+pd,1M
      • +mergeseg
    • +O4
      • +O3
        • +O2
          • +O1
      • -ipo
• • +Otype_safety=ansi
  • 
  • hp_cc,hp_aCC
  • CXXOPTIMIZE

  • Enable [disable] aliasing across types.

    • off - The default. Specifies that aliasing can occur freely across types. This is a synonym to +Onoptrs_ansi and +Onoptrs_strongly_typed options in legacy cc.
    • limited - Code follows ANSI aliasing rules. Unnamed objects should be treated as if they had an unknown type.
    • ansi - Code follows ANSI aliasing rules, and unnamed objects should be treated the same as named objects. This option is synonym to +Optrs_ansi option in legacy cc.
    • strong - Code follows ANSI aliasing rules, except that accesses through lvalues of a character type are not permitted to touch objects of other types. This assumes that field addresses are not taken. This option is synonym to +Optrs_strongly_typed option in legacy cc.
• • -Wl,-a,archive_shared
  • 
  • CXXOPTIMIZE

  • Specifies whether shared or archive libraries are searched with the -l option. For archive_shared, the archive form is preferred, but the shared form is allowed.

• • -Wl,+pd,64M
  • 
  • CXXOPTIMIZE

  • Request a particular virtual memory page size that should be used for data. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • -Wl,+pi,64M
  • 
  • CXXOPTIMIZE

  • Request a particular virtual memory page size that should be used for instructions. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • /usr/lib/hpux32/libCsup.a /opt/smartheap/SmartHeap_8/lib/libsmartheap.a
  • 
  • EXTRA_CXXLIBS

  • Link with SmartHeap library. Note: the HP-UX C support library must included first on the link line.

473.astar

• • +Ofaster
  • 
  • hp_cc,hp_aCC,hp_f90
  • CXXOPTIMIZE

  • This option selects +Ofast, but with the optimization level increased to +O4.

  • Includes:
    • +Ofast
      • +O2
        • +O1
      • +Onolimit
      • +Ofltacc=relaxed
      • +DSnative
      • +FPD
      • -Wl,+pi,1M
      • -Wl,+pd,1M
      • +mergeseg
    • +O4
      • +O3
        • +O2
          • +O1
      • -ipo
• • +Otype_safety=ansi
  • 
  • hp_cc,hp_aCC
  • CXXOPTIMIZE

  • Enable [disable] aliasing across types.

    • off - The default. Specifies that aliasing can occur freely across types. This is a synonym to +Onoptrs_ansi and +Onoptrs_strongly_typed options in legacy cc.
    • limited - Code follows ANSI aliasing rules. Unnamed objects should be treated as if they had an unknown type.
    • ansi - Code follows ANSI aliasing rules, and unnamed objects should be treated the same as named objects. This option is synonym to +Optrs_ansi option in legacy cc.
    • strong - Code follows ANSI aliasing rules, except that accesses through lvalues of a character type are not permitted to touch objects of other types. This assumes that field addresses are not taken. This option is synonym to +Optrs_strongly_typed option in legacy cc.
• • -Wl,-a,archive_shared
  • 
  • CXXOPTIMIZE

  • Specifies whether shared or archive libraries are searched with the -l option. For archive_shared, the archive form is preferred, but the shared form is allowed.

• • -Wl,+pd,64M
  • 
  • CXXOPTIMIZE

  • Request a particular virtual memory page size that should be used for data. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • -Wl,+pi,64M
  • 
  • CXXOPTIMIZE

  • Request a particular virtual memory page size that should be used for instructions. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • +Onoparmsoverlap
  • 
  • CXXOPTIMIZE

  • Optimize with the assumption that subprogram arguments do [do not] refer to the same memory. This option can be used at optimization levels 2, 3, and 4.

• • /usr/lib/hpux32/libCsup.a /opt/smartheap/SmartHeap_8/lib/libsmartheap.a
  • 
  • EXTRA_CXXLIBS

  • Link with SmartHeap library. Note: the HP-UX C support library must included first on the link line.

483.xalancbmk

• • +Oprofile=collect:all
  • 
  • hp_cc,hp_aCC,hp_f90
  • PASS1_CXXFLAGS, PASS1_LDCXXFLAGS

  • Instrument the application to enable collection of profile based optimization data. Qualifiers are a comma-separated list of profile collection qualifiers. The profile collection qualifiers are:

    • arc - Enable collection of arc counts.
    • dcache - Enable collection of data cache misses via hardware performance counters.
    • stride - Enable collection of stride data.
    • loopiter - Enable collection of loop iteration counts.
    • all - Enable collection of all types of profile data. Equivalent to the command +Oprofile=collect:arc,dcache,stride,loopiter.
• • +Oprofile=use
  • 
  • hp_cc,hp_aCC,hp_f90
  • PASS2_CXXFLAGS, PASS2_LDCXXFLAGS

  • Examine the profile database file produced by an instrumented program to perform profile based optimizations on the code. Some optimizations are only enabled when a feedback data file is available.

• • +Ofaster
  • 
  • hp_cc,hp_aCC,hp_f90
  • CXXOPTIMIZE

  • This option selects +Ofast, but with the optimization level increased to +O4.

  • Includes:
    • +Ofast
      • +O2
        • +O1
      • +Onolimit
      • +Ofltacc=relaxed
      • +DSnative
      • +FPD
      • -Wl,+pi,1M
      • -Wl,+pd,1M
      • +mergeseg
    • +O4
      • +O3
        • +O2
          • +O1
      • -ipo
• • +Otype_safety=ansi
  • 
  • hp_cc,hp_aCC
  • CXXOPTIMIZE

  • Enable [disable] aliasing across types.

    • off - The default. Specifies that aliasing can occur freely across types. This is a synonym to +Onoptrs_ansi and +Onoptrs_strongly_typed options in legacy cc.
    • limited - Code follows ANSI aliasing rules. Unnamed objects should be treated as if they had an unknown type.
    • ansi - Code follows ANSI aliasing rules, and unnamed objects should be treated the same as named objects. This option is synonym to +Optrs_ansi option in legacy cc.
    • strong - Code follows ANSI aliasing rules, except that accesses through lvalues of a character type are not permitted to touch objects of other types. This assumes that field addresses are not taken. This option is synonym to +Optrs_strongly_typed option in legacy cc.
• • -Wl,-a,archive_shared
  • 
  • CXXOPTIMIZE

  • Specifies whether shared or archive libraries are searched with the -l option. For archive_shared, the archive form is preferred, but the shared form is allowed.

• • -Wl,+pd,64M
  • 
  • CXXOPTIMIZE

  • Request a particular virtual memory page size that should be used for data. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • -Wl,+pi,64M
  • 
  • CXXOPTIMIZE

  • Request a particular virtual memory page size that should be used for instructions. Sizes of 4K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G, D, and L are supported. A size of D allows the kernel to choose what page size should be used. A size of L results in using the largest page size available. The actual page size may vary if the requested size cannot be fulfilled.

• • +Onoparmsoverlap
  • 
  • CXXOPTIMIZE

  • Optimize with the assumption that subprogram arguments do [do not] refer to the same memory. This option can be used at optimization levels 2, 3, and 4.

• • /usr/lib/hpux32/libCsup.a /opt/smartheap/SmartHeap_8/lib/libsmartheap.a
  • 
  • EXTRA_CXXLIBS

  • Link with SmartHeap library. Note: the HP-UX C support library must included first on the link line.