SPEC Seal of Reviewal CINT2000 Result
Copyright © 1999-2004 Standard Performance Evaluation Corporation
SGI
SGI 2200 2X 400MHz R12k
SPECint_rate2000 = 7.79 
SPECint_rate_base2000 = 7.27 
SPEC license # 4 Tested by: SGI Test date: Apr-2000 Hardware Avail: Jun-2000 Software Avail: Apr-2000
Graph Scale Benchmark Base
Copies
Base
Runtime
Base
Ratio
Copies Runtime Ratio
164.gzip base result bar (5.18)
164.gzip peak result bar (5.36)
164.gzip 2 627    5.18  2 605    5.36 
175.vpr base result bar (8.79)
175.vpr peak result bar (8.98)
175.vpr 2 369    8.79  2 362    8.98 
176.gcc base result bar (7.23)
176.gcc peak result bar (7.22)
176.gcc 2 353    7.23  2 353    7.22 
181.mcf base result bar (11.2)
181.mcf peak result bar (11.2)
181.mcf 2 371    11.2   2 373    11.2  
186.crafty base result bar (7.65)
186.crafty peak result bar (7.72)
186.crafty 2 303    7.65  2 301    7.72 
197.parser base result bar (6.47)
197.parser peak result bar (6.87)
197.parser 2 646    6.47  2 608    6.87 
252.eon base result bar (8.35)
252.eon peak result bar (8.26)
252.eon 2 361    8.35  2 365    8.26 
253.perlbmk base result bar (5.69)
253.perlbmk peak result bar (5.70)
253.perlbmk 2 734    5.69  2 733    5.70 
254.gap base result bar (4.54)
254.gap peak result bar (4.62)
254.gap 2 562    4.54  2 553    4.62 
255.vortex base result bar (6.80)
255.vortex peak result bar (12.3)
255.vortex 2 649    6.80  2 357    12.3  
256.bzip2 base result bar (7.72)
256.bzip2 peak result bar (8.56)
256.bzip2 2 451    7.72  2 407    8.56 
300.twolf base result bar (10.4)
300.twolf peak result bar (10.5)
300.twolf 2 666    10.4   2 666    10.5  
  SPECint_rate_base2000 7.27   
  SPECint_rate2000 7.79 

Hardware
Hardware Vendor: SGI
Model Name: SGI 2200 2X 400MHz R12k
CPU: R12000
CPU MHz: 400
FPU: Integrated
CPU(s) enabled: 2 cores, 2 chips, 1 core/chip
CPU(s) orderable: 2, 4, 6, 8
Parallel: No
Primary Cache: 32KBI + 32KBD on chip
Secondary Cache: 8MB(I+D) off chip
L3 Cache: N/A
Other Cache: N/A
Memory: 2048MB
Disk Subsystem: 2 x 18 GB SCSI (striped)
Other Hardware: None
Software
Operating System: IRIX 6.5.8f
Compiler: MIPSpro 7.3.1.1m C, C++, Fortran90
File System: xfs
System State: Single-user
Notes / Tuning Information
Baseline optimization flags (C and C++ use same flags):
   PASS1 : -Ofast=ip27 -IPA:use_intrinsic -fb_create /tmp/SPEC2000/FBDIR/base/$(EXEBASE)
   PASS2 : -Ofast=ip27 -IPA:use_intrinsic -fb_opt /tmp/SPEC2000/FBDIR/base/$(EXEBASE)
Portability Flags:
   176.gcc: -DUSG  -Dalloca=__builtin_alloca -DMIPS -DHOST_WORDS_BIG_ENDIAN
   186.crafty: -DSGI
   253.perlbmk: -DSPEC_CPU2000_SGI -DI_FCNTL
   254.gap: -DSYS_IS_USG -DSYS_HAS_TIME_PROTO -DSYS_HAS_SIGNAL_PROTO -DSYS_HAS_IOCTL_PROTO
   300.twolf: -DHAVE_SIGNED_CHAR
Peak optimization flags:
note:  all occurances of (FEEDBACK) below means compiled with a two-step process:
   PASS1 = -fb_create /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
   PASS2 = -fb_opt /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
 164.gzip: -Ofast=ip27 -IPA:space=500:plimit=500 -lmalloc (FEEDBACK)
 175.vpr: -Ofast=ip27 -IPA:space=300:plimit=10000:callee_limit=5000:linear=on -LNO:prefetch_ahead=2 
 .        -INLINE:aggressive=on -OPT:Olimit=0:alias=disjoint:alias=restrict -lmalloc (FEEDBACK)
 181.mcf: -Ofast=ip27 -IPA:min_hot=14 -lmalloc (FEEDBACK)
 176.gcc: -Ofast=ip27 (FEEDBACK)
 186.crafty: -Ofast=ip27 -LNO:prefetch=0 -OPT:goto=off -lmalloc (FEEDBACK)
 197.parser: -Ofast=ip27 -IPA:min_hot=14 (FEEDBACK)
 252.eon: -Ofast=ip27 -LNO:prefetch=0 -LANG:exceptions=off -lmalloc (FEEDBACK)
 253.perlbmk: -Ofast=ip27 -IPA:use_intrinsic -Wl,-x (FEEDBACK)
 254.gap: -Ofast=ip27 -IPA:use_intrinsic -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4
 . -OPT:alias=restrict:alias=disjoint -IPA:min_hot=7 -lmalloc (FEEDBACK)
 255.vortex: -Ofast=ip27 -IPA:use_intrinsic -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4 -LNO:opt=0 
 .           -CG:ld_latency=5 -IPA:min_hot=14 -TENV:X=4 -IPA:space=500:plimit=3600 -OPT:goto=off (FEEDBACK)
 256.bzip2: -Ofast=ip27 -IPA:min_hot=5:space=500:plimit=2900 -INLINE:aggressive=on (FEEDBACK)
 300.twolf: -Ofast=ip27 -IPA:use_intrinsic (FEEDBACK)
The following O/S parameters were set:
   setenv PAGESIZE_DATA 4096
   setenv PAGESIZE_TEXT 4096
   setenv PAGESIZE_STACK 4096
   systune -i ; percent_totalmem_4m_pages = 50 ; nlpages_4m = 128
   limit stacksize 500000
The following is done before building each benchmark that requires (FEEDBACK):
 rm -rf /tmp/SPEC2000 ; mkdir /tmp/SPEC2000 ; cd /tmp/SPEC2000 ; mkdir FBDIR_base ; mkdir FBDIR_peak


For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright © 1999-2004 Standard Performance Evaluation Corporation

First published at SPEC.org on 23-May-2000

Generated on Fri Mar 25 16:00:36 2005 by SPEC CPU2000 HTML formatter v1.01