SPECaccel System Requirements

(To check for possible updates to this document, please see http://www.spec.org/accel2023/Docs/ )

Contents

I. Hardware and Software Requirements

A. System/OS

1. About Linux Distributions

2. SPEC does not recommend use of Windows/Unix compatibility products with SPECaccel

B. Memory

C. Disk Space

D. Compiler, or precompiled binaries

II. Portablility Notes

III. About Resources and Mysterious Failures

Note: links to SPECaccel documents on this web page assume that you are reading the page from a directory that also contains the other SPECaccel documents. If by some chance you are reading this web page from a location where the links do not work, try accessing the referenced documents at one of the following locations:

• www.spec.org/accel2023/Docs/
• The $SPEC/Docs/ directory on a system where SPECaccel has been installed.
• The Docs/directory on your SPECaccel distribution.

I. Hardware and Software Requirements

To run and install SPECaccel, the following are required.

A. System/OS:

You will need a computer system running UNIX, or Mac OS X. The benchmark suite includes a toolset. Pre-compiled versions of the toolset are provided that are expected to work with:

• Linux: The SPEC tools are compatible with many contemporary (year 2020) Linux distributions for PowerPC, Aarch64, and x86. For an exact list of the Linux tool sets, where they were built, and their expected compatibility, please see the table below.

Please ensure that you meet the minimum required version prior to installing SPECaccel.

For systems not listed in above, such as earlier or later versions of the above systems, you may find that the tools also work, but SPEC has not tested them. Please see the Portability Notes below.

I.A.1. About Linux distributions

Over time, various mechanisms have evolved on Linux, including libraries, 32-bit/64-bit support, executable format, linking, and run-time loading. These mechanisms have sometimes forked with Linux distributions and then occasionally rejoined later. SPECaccel has been tested with a variety of Linux distributions, but the possibility remains that you may encounter incompatibilities if you are not using *exactly* the same version as was used when the tools were built. Therefore, the table that follows tells you exactly what was used.

If you find that you are unable to install the pre-compiled SPECaccel on Linux, and you would like to build the tools yourself, please see the notes in tools-build.html. SPEC may be able to provide advice for your build, but SPEC does not promise that you will succeed. Please see the limitations described in techsuport.html.

I.A.2. SPEC does not recommend use of Windows/Unix compatibility products with SPECaccel

SPEC does not recommend installation of SPECaccel on Microsoft Windows under Windows/Unix compatibility environments (such as Cygwin, MinGW, MKS, SFU, and so forth). The tools and benchmarks have not been ported to such environments. Please install from an ordinary command window (formerly known as an MS-DOS window).

If you have a Windows/Unix compatibility product on your Windows computer, SPEC recommends that you remove it from your %PATH% prior to installing or using SPECaccel. The reason for this recommendation is that providing a Unix-like environment on Windows poses difficult problems. Historically there have been various approaches, with differing (incompatible) assumptions about how to mask or bridge differences between Windows and Unix. The SPEC toolset has its own approach and its own set of assumptions, and there have been reports of difficult-to-diagnose errors when a Windows/Unix compatibility product is present on the path. If such problems occur, your first step should be to simplify the path, removing the compatibility product.

Windows Subsystem for Linux (WSL) has not been tested but likely to work as WSL2 runs a native Linux kernel in a virtual machine and the tools are effectively running under Linux.

B. Memory

Typically 16 GB of host memory and 16 GB of device memory will be required, exclusive of OS/overhead; but more may be required:

• The SPECaccel benchmarks (code + workload) have been designed to fit within about 15 GB of Accelerator and 16 GB of host physical memory.

• The memory for the benchmarks does not include space needed for the operating system, accelerator overhead and other non-SPEC tasks on the system under test.

Warning: When an operating system runs out of memory, errors may occur that are difficult to diagnose. See the section on resources, below.

C. Disk space

• Typically you will need at least 5 GB of disk space to install and run the suite. However, space needs can vary greatly depending upon your usage and system. The 5 GB estimate is based on the following:

  1. Unpacked and installed, the suite takes approximately 1.5 to 2 GB of disk space.
  2. When compiling your own binaries, the size of the build directories and resulting objects will vary depending upon your system, compiler, and compiler options. Estimate at least .5 to 1 GB of disk space per build. If you plan to maintain multiple sets of binaries, each set will need space.
  3. A single run (using binaries you have built, or using pre built binaries from a separate source) takes an additional 1 to 2 GB of disk space.

• Minimum requirement: It is possible to run with about 2GB of disk space if: you delete the build directories after the build is done; and you clean run directories between tests. See the discussion of disk space in runspec.html for more information about managing disk space.

D. Compiler, or pre-compiled binaries

Since SPEC supplies only source code for the benchmarks, you will need either:

1. A set of compilers for the result(s) you intend to measure: All three of C99, C++98 and Fortran-95 compilers and accelerator support software

   --or--

2. A pre-compiled set of benchmark executables, given to you by another user of the same revision of SPECaccel, and any run-time libraries that may be required for those executables.

II. Portability Notes

The SPECaccel benchmarks use a mixture of single and double precision floating point numbers. The target accelerator must support double precision floating point.

The benchmark 470.bt, requires a large stack size on the host. It is recommended to run with the stack size set to 'unlimited'.

SPECaccel is a source code benchmark, and portability of that source code is one of the chief goals of SPECaccel. SPEC has invested substantial effort to make the benchmarks portable across a wide variety of hardware architectures, operating systems, and compilers.

Despite SPEC's testing efforts, certain portability problems are likely to arise from time to time. For example:

• Some platforms may not have a Fortran-95 compiler available.

• Some older accelerators may not include all the features needed to run the entire suite.

• Sometimes, a new release of a compiler, driver, operating system may introduce new behavior that is incompatible with one of the benchmarks.

If you visit http://www.spec.org/accel2023/ and look up results for SPECaccel, you will find combinations of OS and compiler versions that are known to work. For example, if a vendor reports a SPECaccel result on the SuperHero 4 using SuperHero Unix V4.0 with SuperHero C V4.0 and SuperHero C++ V4.0, you may take that as an assertion by the vendor that the listed versions of Unix, C, and C++ will successfully compile and run the SPECaccel suite on the listed machine.

For systems that have not (yet) been reported by vendors, SPEC can provide limited technical support to resolve portability issues. See techsupport.html for information.

III. About Resources and Mysterious Failures

Resource Demand: The SPECaccel benchmarks place a significant load on your system.

As described above, the nominal memory footprint is about 16 GB on the host. Depending on your operating system architecture, the memory may be of various types, including:

• physical memory,
• virtual memory, and
• swap/pagefile reservations (*);
• process-private heap,
• process-private stack, and
• process-private code;
• operating system memory of similar types when the OS performs tasks on behalf of the process.

(*)You don't want to actually use your pagefile much, as that is a recipe for testing your disk instead of testing your CPU. Nevertheless, it is not uncommon for operating systems to require that pagefile space be "reserved", and benchmarks may fail if reservations are unavailable.

Mysterious failures: If an OS is unable to satisfy a resource request while your benchmarks are running, you may encounter difficult-to-diagnose, hard-to-reproduce error messages. Processes may be killed by the OS on a (seemingly) random basis, or may fail to start. If the OS is feeling sufficiently stressed, error messages may be cryptic or even non-existent. You might, or you might not, be able to find additional detail about the resource shortages in system locations such as event logs, message logs, or console logs.

Resource Competition: Meanwhile, contemporary systems run many tasks other than the benchmarks. Personal systems commonly include processes that support the user, which the user may not be aware of:

• There may be virus/spyware/intrusion defenders, disk defragmenters, search indexers, bluetooth and network listeners, license managers, software updaters, and nightly backup programs.
• There may be automated power-saving modes or screen savers that start when the user wanders away from the keyboard.
• The system may be configured:
  • to download the Library of Congress once every 4 days,
  • to check for email once every 4 minutes, and
  • to update a social media newsfeed once every 4 seconds.

All of the above may affect observed performance, and if you are unlucky, may cause hard-to-reproduce resource shortages that prevent you from completing benchmark runs. Therefore, you may want to consider reviewing the controls for services such as the above, and you may want to reduce the load from these services during the benchmark run. When you consider adjusting services, please observe these CAUTIONS:

• CAUTION 1 SPEC does not endorse any particular solution to the resource problems discussed in this section. You need to make your own decision as to what services and programs are important. If you turn off something essential, and your system turns into a mushroom, it is not SPEC's fault. Use good judgment about what you choose to disable.

• CAUTION 2 If you choose to report results in public, you must run your system in a manner that is documented and supported. See the run rules for details.

In addition, each of these techniques may improve the probability that the benchmarks have a fresh set of dedicated resources:

1. Start a new terminal window, or
2. Log out and back in, or
3. Reboot

Copyright 2014-2023 Standard Performance Evaluation Corporation
All Rights Reserved