|
Lenovo (Test Sponsor: Indiana University) Intel Xeon E5-2680 v3 Lenovo NeXtScale nx360 M5 |
SPECaccel_omp_base = 2.32 |
|
SPECaccel_omp_peak = Not Run |
| ACCEL license: | 3440A | Test date: | Aug-2017 |
|---|---|---|---|
| Test sponsor: | Indiana University | Hardware Availability: | Sep-2014 |
| Tested by: | Indiana University | Software Availability: | Mar-2017 |
| Hardware | |
|---|---|
| CPU Name: | Intel Xeon E5-2680 v3 |
| CPU Characteristics: | Intel Turbo Boost Technology on, Hyper-threading off. |
| CPU MHz: | 2500 |
| CPU MHz Maximum: | 3300 |
| FPU: | Integrated |
| CPU(s) enabled: | 24 cores, 2 chips, 12 cores/chip |
| CPU(s) orderable: | 1-2 chip |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| L3 Cache: | 30 MB I+D on chip per chip |
| Other Cache: | None |
| Memory: | 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R) |
| Disk Subsystem: | None |
| Other Hardware: | None |
| Accelerator | |
|---|---|
| Accel Model Name: | Intel Xeon E5-2680 v3 |
| Accel Vendor: | Intel |
| Accel Name: | Intel Xeon E5-2680 v3 |
| Type of Accel: | CPU |
| Accel Connection: | N/A |
| Does Accel Use ECC: | yes |
| Accel Description: | Intel Xeon E5-2680 v3 @2.5~3.3GHz |
| Accel Driver: | None |
| Software | |
|---|---|
| Operating System: | Red Hat Enterprise Linux Server release 7.3 (Maipo) 3.10.0-514.26.1.el7.x86_64 |
| Compiler: | Intel Parallel Studio XE 2017 for Linux Version 17.0.3.191 Build 20170404 |
| File System: | Lustre 2.5 (DDN SFA12K) over 10Gb ethernet |
| System State: | Run level 3 (multi-user) |
| Other Software: | None |
Results Table
| Benchmark | Base | Peak | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||
| 503.postencil | 143 | 0.761 | 107 | 1.02 | 95.6 | 1.14 | ||||||
| 504.polbm | 91.5 | 1.33 | 83.2 | 1.47 | 83.2 | 1.47 | ||||||
| 514.pomriq | 509 | 1.22 | 510 | 1.22 | 508 | 1.22 | ||||||
| 550.pmd | 215 | 1.12 | 214 | 1.12 | 215 | 1.12 | ||||||
| 551.ppalm | 184 | 2.95 | 184 | 2.95 | 183 | 2.97 | ||||||
| 552.pep | 219 | 1.05 | 215 | 1.07 | 215 | 1.07 | ||||||
| 553.pclvrleaf | 339 | 3.38 | 341 | 3.36 | 322 | 3.56 | ||||||
| 554.pcg | 86.4 | 3.86 | 87.0 | 3.83 | 87.4 | 3.81 | ||||||
| 555.pseismic | 190 | 1.49 | 184 | 1.53 | 196 | 1.44 | ||||||
| 556.psp | 110 | 7.47 | 110 | 7.46 | 98.6 | 8.29 | ||||||
| 557.pcsp | 124 | 6.94 | 113 | 7.59 | 116 | 7.39 | ||||||
| 559.pmniGhost | 183 | 2.17 | 192 | 2.07 | 187 | 2.12 | ||||||
| 560.pilbdc | 550 | 1.19 | 545 | 1.20 | 548 | 1.19 | ||||||
| 563.pswim | 107 | 1.49 | 99.0 | 1.61 | 109 | 1.46 | ||||||
| 570.pbt | 67.1 | 11.6 | 67.2 | 11.6 | 66.4 | 11.8 | ||||||
Platform Notes
Sysinfo program /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate/Docs/sysinfo $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 running on c13 Thu Aug 10 22:19:47 2017 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/accel/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz 2 "physical id"s (chips) 24 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 12 siblings : 12 physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 cache size : 30720 KB From /proc/meminfo MemTotal: 263439912 kB HugePages_Total: 0 Hugepagesize: 2048 kB From /etc/*release* /etc/*version* os-release: NAME="Red Hat Enterprise Linux Server" VERSION="7.3 (Maipo)" ID="rhel" ID_LIKE="fedora" VERSION_ID="7.3" PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server uname -a: Linux c13 3.10.0-514.26.1.el7.x86_64 #1 SMP Tue Jun 20 01:16:02 EDT 2017 x86_64 x86_64 x86_64 GNU/Linux run-level 3 Aug 1 19:29 SPEC is set to: /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate Filesystem Type Size Used Avail Use% Mounted on 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 239T 96% /N/dc2 Additional information from dmidecode: Warning: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. (End of data from sysinfo program)
Base Compiler Invocation
C benchmarks:
| icc |
Fortran benchmarks:
| ifort |
Benchmarks using both Fortran and C:
| icc ifort |
Base Portability Flags
| 503.postencil: | -DSPEC_USE_INNER_SIMD |
| 504.polbm: | -DSPEC_USE_INNER_SIMD |
| 514.pomriq: | -DSPEC_USE_INNER_SIMD |
| 550.pmd: | -DSPEC_USE_INNER_SIMD -80 |
| 551.ppalm: | -DSPEC_USE_INNER_SIMD |
| 552.pep: | -DSPEC_USE_INNER_SIMD |
| 553.pclvrleaf: | -DSPEC_USE_INNER_SIMD |
| 554.pcg: | -DSPEC_USE_INNER_SIMD |
| 555.pseismic: | -DSPEC_USE_INNER_SIMD |
| 556.psp: | -DSPEC_USE_INNER_SIMD |
| 557.pcsp: | -DSPEC_USE_INNER_SIMD |
| 559.pmniGhost: | -DSPEC_USE_INNER_SIMD -nofor-main |
| 560.pilbdc: | -DSPEC_USE_INNER_SIMD |
| 563.pswim: | -DSPEC_USE_INNER_SIMD |
| 570.pbt: | -DSPEC_USE_INNER_SIMD |