# Invocation command line:
# /tmp/spec/1.2/bin/runspec --config=/tmp/spec/1.2/config/k80-omp.cfg --flagsurl=file://bigdata/rz/kroh21/SPEC/ACCEL/run/gcc62_ocl_flags.xml --tune=base --reportable openmp
# output_root was not used for this run
############################################################################
# Invocation command line:
# /home/junjie/spec/accel-test/75/bin/runspec -c omp-intel --reportable openmp --output_format raw,pdf,txt
# output_root was not used for this run
############################################################################
# This is a sample OpenACC config file. It was tested with:
#
#      Compiler name/version:       PGI 13.9
#      Operating system version:    64-bit Linux
#      CPU:                         x86_64 Based Systems
#      Accelerator:                 NVIDIA Tesla M2090
#      Driver:                      NVIDIA UNIX x86_64 Kernel Module 319.49
#
# If your platform uses different versions, different
# hardware or operates in a different mode (for
# example, 32- vs. 64-bit mode), there is the possibiliy
# that this configuration file may not work as-is.
#
# Note that issues with compilation should be directed
# to the compiler vendor. Information about SPEC techncial
# support can be found in the techsupport document in the
# Docs directory of your benchmark installation.
#
# Also note that this is a sample configuration. It
# is expected to work for the environment in which
# it was tested; it is not guaranteed that this is
# the config file that will provide the best performance.
#
####################################################################
# Tester information
####################################################################
l# System Description
hw_model        = Intel Xeon(R) CPU E5-2630-v3 + NVIDIA Tesla K80
hw_memory000    = 256 GB ()
hw_disk         = 44 GB SSD
hw_vendor       = Bull
hw_avail		= Sept-2013

# CPU description
hw_cpu          = Intel Xeon(R) CPU E5-2630-v3 @ 2.40GHz
hw_cpu_char000  = Intel Turbo Boost Technology up tp 3.20 GHz
hw_cpu_char001  = AVX clock: 2100 MHz
hw_cpu_mhz      = 2400
hw_cpu_max_mhz 	= 2400
hw_nchips       = 2
hw_ncores       = 16
hw_ncoresperchip = 8
hw_nthreadspercore = 2
hw_ncpuorder    = 1,2 chips
hw_fpu          = Integrated
hw_pcache       = 32 KB I + 32 KB D on chip per core
hw_scache       = 256 KB I+D on chip per core
hw_tcache       = 20 MB I+D on chip per chip
hw_ocache       = None

####################################################################
# Accelerator Hardware information
####################################################################
hw_accel_model	=  Intel Xeon(R) CPU E5-2630-v3
hw_accel_vendor	=  Intel
hw_accel_name	=  Intel Xeon(R) CPU E5-2630-v3
hw_accel_type	=  CPU
hw_accel_connect = N/A
hw_accel_ecc	=  yes
hw_accel_desc= Intel Xeon(R) CPU E5-2630-v3 @ 2.40GHz

# Tester description - edit the date, put your license number here!

####################################################################
# Tester information
####################################################################
tester          = HZDR
test_sponsor    = HZDR
license_num     = 65A
prepared_by     =
#display_order   = 1a

# Operating system, file system

sw_os000        = Ubuntu 14.04 LTS
sw_os001 = Kernel 4.4.0-38-generic
sw_file         = ext3
sw_accel_driver =
sw_other		=
sw_avail		= Mar-2015
sw_state		= Run Level 3 (Multi-User)
sw_base_ptrsize	 = 64-bit


ext           = intel-omp
output_format = asc,pdf,raw,txt,config
#table         = 0
teeout        = no
teerunout     = yes
tune          = base,peak
env_vars    = 1


openmp=default=default:
CC           = icc
CXX          = icpc
FC           = ifort

ENV_KMP_LIBRARY=turnaround
ENV_KMP_BLOCKTIME=infinite
ENV_OMP_DYNAMIC=FALSE
ENV_KMP_AFFINITY=compact,0
ENV_OMP_NUM_THREADS=32
ENV_KMP_HW_SUBSET=2S,8C,2T
ENV_FORT_BUFFERED=true

openmp=base=default=default:
OPTIMIZE     = -O3 -qopenmp -qopenmp-offload=host -xHost
PORTABILITY = -DSPEC_USE_INNER_SIMD

550.pmd=default=default=default:
FPORTABILITY = -80

559.pmniGhost=default=default=default:
FPORTABILITY = -nofor-main

503.postencil=peak=default=default:
basepeak = yes

504.polbm=peak=default=default:
ENV_OMP_NUM_THREADS=64
ENV_KMP_HW_SUBSET=2S,16C,2T

514.pomriq=peak=default=default:
basepeak = yes

550.pmd=peak=default=default:
OPTIMIZE += -qopt-prefetch=2

551.ppalm=peak=default=default:
ENV_OMP_NUM_THREADS=36
ENV_KMP_HW_SUBSET=2S,18C,1T
OPTIMIZE += -I/home/abobyr/FFTW-3.3.6/include
LIBS += -L/home/abobyr/FFTW-3.3.6/lib -lfftw3
PORTABILITY+= -DSPEC_HOST_FFTW3
FPORTABILITY+= -DSPEC_HOST_FFTW3

552.pep=peak=default=default:
OPTIMIZE += -qopt-streaming-stores always

553.pclvrleaf=peak=default=default:
basepeak = yes

554.pcg=peak=default=default:
OPTIMIZE += -qopt-prefetch=5

555.pseismic=peak=default=default:
basepeak = yes

556.psp=peak=default=default:
basepeak = yes

557.pcsp=peak=default=default:
basepeak = yes

559.pmniGhost=peak=default=default:
basepeak = yes

560.pilbdc=peak=default=default:
basepeak = yes

563.pswim=peak=default=default:
basepeak = yes

570.pbt=peak=default=default:
basepeak = yes


# The following settings were obtained by running 'specperl $[top]/Docs/sysinfo'
default:
notes_plat_sysinfo_000 = Sysinfo program /tmp/spec/1.2/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_010 = running on kepler028-gsi Wed Jul  5 11:51:03 2017
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz
notes_plat_sysinfo_050 =       2 "physical id"s (chips)
notes_plat_sysinfo_055 =       32 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 8
notes_plat_sysinfo_080 =       siblings  : 16
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 6 7
notes_plat_sysinfo_090 =       physical 1: cores 0 1 2 3 4 5 6 7
notes_plat_sysinfo_095 =    cache size : 20480 KB
notes_plat_sysinfo_100 =
notes_plat_sysinfo_105 = From /proc/meminfo
notes_plat_sysinfo_110 =    MemTotal:       264058960 kB
notes_plat_sysinfo_115 =    HugePages_Total:       0
notes_plat_sysinfo_120 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_125 =
notes_plat_sysinfo_130 = /usr/bin/lsb_release -d
notes_plat_sysinfo_135 =    Ubuntu 14.04.5 LTS
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    debian_version: jessie/sid
notes_plat_sysinfo_155 =    os-release:
notes_plat_sysinfo_160 =       NAME="Ubuntu"
notes_plat_sysinfo_165 =       VERSION="14.04.5 LTS, Trusty Tahr"
notes_plat_sysinfo_170 =       ID=ubuntu
notes_plat_sysinfo_175 =       ID_LIKE=debian
notes_plat_sysinfo_180 =       PRETTY_NAME="Ubuntu 14.04.5 LTS"
notes_plat_sysinfo_185 =       VERSION_ID="14.04"
notes_plat_sysinfo_190 =       HOME_URL="http://www.ubuntu.com/"
notes_plat_sysinfo_195 =       SUPPORT_URL="http://help.ubuntu.com/"
notes_plat_sysinfo_200 =    rh-release: Red Hat Enterprise Linux Server release 7.2 (Maipo)
notes_plat_sysinfo_205 =
notes_plat_sysinfo_210 = uname -a:
notes_plat_sysinfo_215 =    Linux kepler028-gsi 4.4.0-38-generic #57~14.04.1-Ubuntu SMP Tue Sep 6
notes_plat_sysinfo_220 =    17:20:43 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_225 =
notes_plat_sysinfo_230 = run-level 5 Dec 16 18:14
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = SPEC is set to: /tmp/spec/1.2
notes_plat_sysinfo_245 =    Filesystem     Type  Size  Used Avail Use% Mounted on
notes_plat_sysinfo_250 =    /dev/sda1      ext3   44G   19G   24G  44% /
notes_plat_sysinfo_255 =
notes_plat_sysinfo_260 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'
notes_plat_sysinfo_265 =
notes_plat_sysinfo_270 = (End of data from sysinfo program)
hw_cpu_name    = Intel Xeon E5-2630 v3
hw_disk        = 44 GB  add more disk info here
hw_memory001   = 251.826 GB fixme: If using DDR3, format is:
hw_memory002   = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
hw_nchips      = 2
prepared_by    = kroh21  (is never output, only tags rawfile)
sw_file        = ext3
sw_os001       = Ubuntu 14.04.5 LTS
sw_os002       = 4.4.0-38-generic
sw_state       = Run level 5 (add definition here)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = file://bigdata/rz/kroh21/SPEC/ACCEL/run/gcc62_ocl_flags.xml
sw_peak_ptrsize = Not Applicable

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = file://bigdata/rz/kroh21/SPEC/ACCEL/run/Intel-icc17.0-linux64.xml
hw_cpu_name = Intel Xeon E5-2630 v3
hw_cpu_mhz = 2400
hw_cpu_max_mhz = 2400
hw_fpu = Integrated
hw_ncpuorder = 1,2 chips
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 256 KB I+D on chip per core
hw_tcache = 20 MB I+D on chip per chip
hw_ocache = None
hw_disk = 128 GB Samsung SSD 850 PRO
hw_accel_model = Intel Xeon CPU E5-2630-v3
hw_accel_vendor = Intel
hw_accel_name = Intel Xeon CPU E5-2630-v3
hw_accel_type = CPU
hw_accel_connect = N/A
hw_accel_ecc = yes
sw_compiler = C/C++/Fortran: Version 17.2 of the Intel Compiler
sw_file = ext3
sw_state = Run level 5 (user-level)
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = Not Applicable
hw_accel_desc000 = Intel Xeon CPU E5-2630-v3 @ 2.40GHz
hw_accel_desc001 = Turbo ON, SMT ON
test_sponsor = HZDR
license_num = 65A
tester = HZDR
hw_avail = Sep-2013
sw_avail = Mar-2015
prepared_by = kroh21  (is never output, only tags rawfile)
hw_vendor = Asus
hw_model = ASUS ESC4000 G3 Series
hw_nthreadspercore = 2
hw_ncoresperchip = 8
hw_ncores = 16
hw_nchips = 2
hw_cpu_char000 = Intel Turbo Boost Technology up tp 3.20 GHz
hw_cpu_char001 = AVX clock: 2100 MHz
hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-17000R-15, ECC,
hw_memory001 = running at 1866 MHz)
sw_os000 = Ubuntu 14.04.5 LTS
sw_os001 = 4.4.0-38-generic
notes_plat_sysinfo_000 = Sysinfo program /tmp/spec/1.2/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_010 = running on kepler028-gsi Wed Jul  5 11:51:03 2017
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz
notes_plat_sysinfo_050 =       2 "physical id"s (chips)
notes_plat_sysinfo_055 =       32 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 8
notes_plat_sysinfo_080 =       siblings  : 16
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 6 7
notes_plat_sysinfo_090 =       physical 1: cores 0 1 2 3 4 5 6 7
notes_plat_sysinfo_095 =    cache size : 20480 KB
notes_plat_sysinfo_100 =
notes_plat_sysinfo_105 = From /proc/meminfo
notes_plat_sysinfo_110 =    MemTotal:       264058960 kB
notes_plat_sysinfo_115 =    HugePages_Total:       0
notes_plat_sysinfo_120 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_125 =
notes_plat_sysinfo_130 = /usr/bin/lsb_release -d
notes_plat_sysinfo_135 =    Ubuntu 14.04.5 LTS
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    debian_version: jessie/sid
notes_plat_sysinfo_155 =    os-release:
notes_plat_sysinfo_160 =       NAME="Ubuntu"
notes_plat_sysinfo_165 =       VERSION="14.04.5 LTS, Trusty Tahr"
notes_plat_sysinfo_170 =       ID=ubuntu
notes_plat_sysinfo_175 =       ID_LIKE=debian
notes_plat_sysinfo_180 =       PRETTY_NAME="Ubuntu 14.04.5 LTS"
notes_plat_sysinfo_185 =       VERSION_ID="14.04"
notes_plat_sysinfo_190 =       HOME_URL="http://www.ubuntu.com/"
notes_plat_sysinfo_195 =       SUPPORT_URL="http://help.ubuntu.com/"
notes_plat_sysinfo_200 =    rh-release: Red Hat Enterprise Linux Server release 7.2 (Maipo)
notes_plat_sysinfo_205 =
notes_plat_sysinfo_210 = uname -a:
notes_plat_sysinfo_215 =    Linux kepler028-gsi 4.4.0-38-generic #57~14.04.1-Ubuntu SMP Tue Sep 6
notes_plat_sysinfo_220 =    17:20:43 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_225 =
notes_plat_sysinfo_230 = run-level 5 Dec 16 18:14
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = SPEC is set to: /tmp/spec/1.2
notes_plat_sysinfo_245 =    Filesystem     Type  Size  Used Avail Use% Mounted on
notes_plat_sysinfo_250 =    /dev/sda1      ext3   44G   19G   24G  44% /
notes_plat_sysinfo_255 =
notes_plat_sysinfo_260 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'
notes_plat_sysinfo_265 =
notes_plat_sysinfo_270 = (End of data from sysinfo program)

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = file://bigdata/rz/kroh21/SPEC/ACCEL/run/Intel-icc17.0-linux64.xml
hw_cpu_name = Intel Xeon E5-2630 v3
hw_cpu_mhz = 2400
hw_cpu_max_mhz = 2400
hw_fpu = Integrated
hw_ncpuorder = 1,2 chips
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 256 KB I+D on chip per core
hw_tcache = 20 MB I+D on chip per chip
hw_ocache = None
hw_disk = 128 GB Samsung SSD 850 PRO
hw_accel_model = Intel Xeon CPU E5-2630-v3
hw_accel_vendor = Intel
hw_accel_name = Intel Xeon CPU E5-2630-v3
hw_accel_type = CPU
hw_accel_connect = N/A
hw_accel_ecc = yes
sw_compiler = C/C++/Fortran: Version 17.2 of the Intel Compiler
sw_file = ext3
sw_state = Run level 5 (user-level)
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = Not Applicable
hw_accel_desc000 = Intel Xeon CPU E5-2630-v3 @ 2.40GHz
hw_accel_desc001 = Turbo ON, SMT ON
test_sponsor = HZDR
license_num = 65A
tester = HZDR
hw_avail = Sep-2013
sw_avail = Mar-2015
prepared_by = kroh21  (is never output, only tags rawfile)
hw_vendor = Asus
hw_model = ASUS ESC4000 G3 Series
hw_nthreadspercore = 2
hw_ncoresperchip = 8
hw_ncores = 16
hw_nchips = 2
hw_cpu_char000 = Intel Turbo Boost Technology up tp 3.20 GHz
hw_cpu_char001 = AVX clock: 2100 MHz
hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-17000R-15, ECC,
hw_memory001 = running at 1866 MHz)
sw_os000 = Ubuntu 14.04.5 LTS
sw_os001 = 4.4.0-38-generic
notes_plat_sysinfo_000 = Sysinfo program /tmp/spec/1.2/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_010 = running on kepler028-gsi Wed Jul  5 11:51:03 2017
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz
notes_plat_sysinfo_050 =       2 "physical id"s (chips)
notes_plat_sysinfo_055 =       32 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 8
notes_plat_sysinfo_080 =       siblings  : 16
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 6 7
notes_plat_sysinfo_090 =       physical 1: cores 0 1 2 3 4 5 6 7
notes_plat_sysinfo_095 =    cache size : 20480 KB
notes_plat_sysinfo_100 =
notes_plat_sysinfo_105 = From /proc/meminfo
notes_plat_sysinfo_110 =    MemTotal:       264058960 kB
notes_plat_sysinfo_115 =    HugePages_Total:       0
notes_plat_sysinfo_120 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_125 =
notes_plat_sysinfo_130 = /usr/bin/lsb_release -d
notes_plat_sysinfo_135 =    Ubuntu 14.04.5 LTS
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    debian_version: jessie/sid
notes_plat_sysinfo_155 =    os-release:
notes_plat_sysinfo_160 =       NAME="Ubuntu"
notes_plat_sysinfo_165 =       VERSION="14.04.5 LTS, Trusty Tahr"
notes_plat_sysinfo_170 =       ID=ubuntu
notes_plat_sysinfo_175 =       ID_LIKE=debian
notes_plat_sysinfo_180 =       PRETTY_NAME="Ubuntu 14.04.5 LTS"
notes_plat_sysinfo_185 =       VERSION_ID="14.04"
notes_plat_sysinfo_190 =       HOME_URL="http://www.ubuntu.com/"
notes_plat_sysinfo_195 =       SUPPORT_URL="http://help.ubuntu.com/"
notes_plat_sysinfo_200 =    rh-release: Red Hat Enterprise Linux Server release 7.2 (Maipo)
notes_plat_sysinfo_205 =
notes_plat_sysinfo_210 = uname -a:
notes_plat_sysinfo_215 =    Linux kepler028-gsi 4.4.0-38-generic #57~14.04.1-Ubuntu SMP Tue Sep 6
notes_plat_sysinfo_220 =    17:20:43 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_225 =
notes_plat_sysinfo_230 = run-level 5 Dec 16 18:14
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = SPEC is set to: /tmp/spec/1.2
notes_plat_sysinfo_245 =    Filesystem     Type  Size  Used Avail Use% Mounted on
notes_plat_sysinfo_250 =    /dev/sda1      ext3   44G   19G   24G  44% /
notes_plat_sysinfo_255 =
notes_plat_sysinfo_260 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'
notes_plat_sysinfo_265 =
notes_plat_sysinfo_270 = (End of data from sysinfo program)

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = file://bigdata/rz/kroh21/SPEC/ACCEL/run/Intel-icc17.0-linux64.xml
hw_cpu_name = Intel Xeon E5-2630 v3
hw_cpu_mhz = 2400
hw_cpu_max_mhz = 3200
hw_fpu = Integrated
hw_ncpuorder = 1,2 chips
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 256 KB I+D on chip per core
hw_tcache = 20 MB I+D on chip per chip
hw_ocache = None
hw_disk = 128 GB Samsung SSD 850 PRO
hw_accel_model = Intel Xeon CPU E5-2630 v3
hw_accel_vendor = Intel
hw_accel_name = Intel Xeon CPU E5-2630 v3
hw_accel_type = CPU
hw_accel_connect = N/A
hw_accel_ecc = yes
sw_file = ext3
sw_state = Run level 5 (user-level)
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = Not Applicable
hw_accel_desc000 = Intel Xeon CPU E5-2630 v3 @ 2.40GHz
hw_accel_desc001 = Turbo ON, SMT ON
test_sponsor = HZDR
license_num = 65A
tester = HZDR
hw_avail = Sep-2013
sw_avail = Mar-2015
prepared_by = kroh21  (is never output, only tags rawfile)
hw_vendor = Asus
hw_model = ASUS ESC4000 G3 Series
hw_nthreadspercore = 2
hw_ncoresperchip = 8
hw_ncores = 16
hw_nchips = 2
hw_cpu_char000 = Intel Turbo Boost Technology up to 3.20 GHz
hw_cpu_char001 = AVX clock: 2100 MHz
hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-17000R-15, ECC,
hw_memory001 = running at 1866 MHz)
sw_compiler000 = C/C++/Fortran: Version 17.0.2.174 of the Intel
sw_compiler001 = Compilers
sw_os000 = Ubuntu 14.04.5 LTS
sw_os001 = 4.4.0-38-generic
notes_plat_sysinfo_000 = Sysinfo program /tmp/spec/1.2/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_010 = running on kepler028-gsi Wed Jul  5 11:51:03 2017
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz
notes_plat_sysinfo_050 =       2 "physical id"s (chips)
notes_plat_sysinfo_055 =       32 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 8
notes_plat_sysinfo_080 =       siblings  : 16
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 6 7
notes_plat_sysinfo_090 =       physical 1: cores 0 1 2 3 4 5 6 7
notes_plat_sysinfo_095 =    cache size : 20480 KB
notes_plat_sysinfo_100 =
notes_plat_sysinfo_105 = From /proc/meminfo
notes_plat_sysinfo_110 =    MemTotal:       264058960 kB
notes_plat_sysinfo_115 =    HugePages_Total:       0
notes_plat_sysinfo_120 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_125 =
notes_plat_sysinfo_130 = /usr/bin/lsb_release -d
notes_plat_sysinfo_135 =    Ubuntu 14.04.5 LTS
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    debian_version: jessie/sid
notes_plat_sysinfo_155 =    os-release:
notes_plat_sysinfo_160 =       NAME="Ubuntu"
notes_plat_sysinfo_165 =       VERSION="14.04.5 LTS, Trusty Tahr"
notes_plat_sysinfo_170 =       ID=ubuntu
notes_plat_sysinfo_175 =       ID_LIKE=debian
notes_plat_sysinfo_180 =       PRETTY_NAME="Ubuntu 14.04.5 LTS"
notes_plat_sysinfo_185 =       VERSION_ID="14.04"
notes_plat_sysinfo_190 =       HOME_URL="http://www.ubuntu.com/"
notes_plat_sysinfo_195 =       SUPPORT_URL="http://help.ubuntu.com/"
notes_plat_sysinfo_200 =    rh-release: Red Hat Enterprise Linux Server release 7.2 (Maipo)
notes_plat_sysinfo_205 =
notes_plat_sysinfo_210 = uname -a:
notes_plat_sysinfo_215 =    Linux kepler028-gsi 4.4.0-38-generic #57~14.04.1-Ubuntu SMP Tue Sep 6
notes_plat_sysinfo_220 =    17:20:43 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_225 =
notes_plat_sysinfo_230 = run-level 5 Dec 16 18:14
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = SPEC is set to: /tmp/spec/1.2
notes_plat_sysinfo_245 =    Filesystem     Type  Size  Used Avail Use% Mounted on
notes_plat_sysinfo_250 =    /dev/sda1      ext3   44G   19G   24G  44% /
notes_plat_sysinfo_255 =
notes_plat_sysinfo_260 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'
notes_plat_sysinfo_265 =
notes_plat_sysinfo_270 = (End of data from sysinfo program)

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = https://www.spec.org/accel/flags/Intel-icc17.0-linux64.20170906.xml
hw_cpu_name = Intel Xeon E5-2630 v3
hw_cpu_mhz = 2400
hw_cpu_max_mhz = 3200
hw_fpu = Integrated
hw_ncpuorder = 1,2 chips
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 256 KB I+D on chip per core
hw_tcache = 20 MB I+D on chip per chip
hw_ocache = None
hw_disk = 128 GB Samsung SSD 850 PRO
hw_accel_model = Intel Xeon CPU E5-2630 v3
hw_accel_vendor = Intel
hw_accel_name = Intel Xeon CPU E5-2630 v3
hw_accel_type = CPU
hw_accel_connect = N/A
hw_accel_ecc = yes
sw_file = ext3
sw_state = Run level 5 (user-level)
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = Not Applicable
hw_accel_desc000 = Intel Xeon CPU E5-2630 v3 @ 2.40GHz
hw_accel_desc001 = Turbo ON, SMT ON
test_sponsor = HZDR
license_num = 65A
tester = HZDR
hw_avail = Sep-2013
sw_avail = Mar-2015
prepared_by = kroh21  (is never output, only tags rawfile)
hw_vendor = Asus
hw_model = ASUS ESC4000 G3 Series
hw_nthreadspercore = 2
hw_ncoresperchip = 8
hw_ncores = 16
hw_nchips = 2
hw_cpu_char000 = Intel Turbo Boost Technology up to 3.20 GHz
hw_cpu_char001 = AVX clock: 2100 MHz
hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-17000R-15, ECC,
hw_memory001 = running at 1866 MHz)
sw_compiler000 = C/C++/Fortran: Version 17.0.2.174 of the Intel
sw_compiler001 = Compilers
sw_os000 = Ubuntu 14.04.5 LTS
sw_os001 = 4.4.0-38-generic
notes_plat_sysinfo_000 = Sysinfo program /tmp/spec/1.2/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_010 = running on kepler028-gsi Wed Jul  5 11:51:03 2017
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz
notes_plat_sysinfo_050 =       2 "physical id"s (chips)
notes_plat_sysinfo_055 =       32 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 8
notes_plat_sysinfo_080 =       siblings  : 16
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 6 7
notes_plat_sysinfo_090 =       physical 1: cores 0 1 2 3 4 5 6 7
notes_plat_sysinfo_095 =    cache size : 20480 KB
notes_plat_sysinfo_100 =
notes_plat_sysinfo_105 = From /proc/meminfo
notes_plat_sysinfo_110 =    MemTotal:       264058960 kB
notes_plat_sysinfo_115 =    HugePages_Total:       0
notes_plat_sysinfo_120 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_125 =
notes_plat_sysinfo_130 = /usr/bin/lsb_release -d
notes_plat_sysinfo_135 =    Ubuntu 14.04.5 LTS
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    debian_version: jessie/sid
notes_plat_sysinfo_155 =    os-release:
notes_plat_sysinfo_160 =       NAME="Ubuntu"
notes_plat_sysinfo_165 =       VERSION="14.04.5 LTS, Trusty Tahr"
notes_plat_sysinfo_170 =       ID=ubuntu
notes_plat_sysinfo_175 =       ID_LIKE=debian
notes_plat_sysinfo_180 =       PRETTY_NAME="Ubuntu 14.04.5 LTS"
notes_plat_sysinfo_185 =       VERSION_ID="14.04"
notes_plat_sysinfo_190 =       HOME_URL="http://www.ubuntu.com/"
notes_plat_sysinfo_195 =       SUPPORT_URL="http://help.ubuntu.com/"
notes_plat_sysinfo_200 =    rh-release: Red Hat Enterprise Linux Server release 7.2 (Maipo)
notes_plat_sysinfo_205 =
notes_plat_sysinfo_210 = uname -a:
notes_plat_sysinfo_215 =    Linux kepler028-gsi 4.4.0-38-generic #57~14.04.1-Ubuntu SMP Tue Sep 6
notes_plat_sysinfo_220 =    17:20:43 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_225 =
notes_plat_sysinfo_230 = run-level 5 Dec 16 18:14
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = SPEC is set to: /tmp/spec/1.2
notes_plat_sysinfo_245 =    Filesystem     Type  Size  Used Avail Use% Mounted on
notes_plat_sysinfo_250 =    /dev/sda1      ext3   44G   19G   24G  44% /
notes_plat_sysinfo_255 =
notes_plat_sysinfo_260 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'
notes_plat_sysinfo_265 =
notes_plat_sysinfo_270 = (End of data from sysinfo program)