# Invocation command line:
# /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0/bin/runspec --reportable --config SKX.cfg --tune base,peak --flagsurl=config/flags/Intel-icc18.0-linux64.xml openmp --rebuild
# output_root was not used for this run
############################################################################
VENDOR        = intel
action        = validate
PATHSEP       = /

check_md5     = 1
env_vars      = 1
level         = 40
output_format = asc
backup_config = 0

default=default=default=default:
CC   = icc
FC   = ifort
CXX  = icpc
OBJ  = .o

default=default=default=default:
OPTIMIZE = -O3 -xCOMMON-AVX512 -qopenmp -qopenmp-offload=host
PORTABILITY = -DSPEC_USE_INNER_SIMD
ENV_KMP_LIBRARY=turnaround
ENV_KMP_BLOCKTIME=infinite
ENV_OMP_DYNAMIC=FALSE
ENV_KMP_AFFINITY=compact,0
ENV_FORT_BUFFERED=true
ENV_OMP_NUM_THREADS=112
ENV_KMP_HW_SUBSET=2S,28C,2T

550.pmd=default=default=default:
FPORTABILITY = -80

559.pmniGhost=default=default=default:
FPORTABILITY=-nofor-main

503.postencil=peak=default=default:
basepeak=yes

504.polbm=peak=default=default:
basepeak=yes

514.pomriq=peak=default=default:
ENV_OMP_NUM_THREADS=112
ENV_KMP_HW_SUBSET=2S,28C,2T
OPTIMIZE += -qopt-streaming-stores always -ipo

550.pmd=peak=default=default:
ENV_OMP_NUM_THREADS=112
ENV_KMP_HW_SUBSET=2S,28C,2T
OPTIMIZE += -fimf-precision=low

551.ppalm=peak=default=default:
ENV_OMP_NUM_THREADS=56
ENV_KMP_HW_SUBSET=2S,28C,1T
OPTIMIZE += -I/home/abobyr/FFTW-3.3.6_SKL/include
LIBS += -L/home/abobyr/FFTW-3.3.6_SKL/lib -lfftw3
PORTABILITY+= -DSPEC_HOST_FFTW3
FPORTABILITY+= -DSPEC_HOST_FFTW3

552.pep=peak=default=default:
ENV_OMP_NUM_THREADS=112
ENV_KMP_HW_SUBSET=2S,28C,2T
OPTIMIZE += -qopt-streaming-stores always

553.pclvrleaf=peak=default=default:
ENV_OMP_NUM_THREADS=112
ENV_KMP_HW_SUBSET=2S,28C,2T
OPTIMIZE += -qopt-streaming-stores always

554.pcg=peak=default=default:
ENV_OMP_NUM_THREADS=112
ENV_KMP_HW_SUBSET=2S,28C,2T

555.pseismic=peak=default=default:
ENV_OMP_NUM_THREADS=56
ENV_KMP_HW_SUBSET=2S,28C,1T

556.psp=peak=default=default:
ENV_OMP_NUM_THREADS=56
ENV_KMP_HW_SUBSET=2S,28C,1T
OPTIMIZE += -ipo

557.pcsp=peak=default=default:
basepeak=yes

559.pmniGhost=peak=default=default:
ENV_OMP_NUM_THREADS=56
ENV_KMP_HW_SUBSET=2S,28C,1T

560.pilbdc=peak=default=default:
basepeak=yes

563.pswim=peak=default=default:
ENV_OMP_NUM_THREADS=56
ENV_KMP_HW_SUBSET=2S,28C,1T

570.pbt=peak=default=default:
basepeak=yes


# The following settings were obtained by running 'specperl $[top]/Docs/sysinfo'
default:
notes_plat_sysinfo_000 = Sysinfo program
notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0/Docs/sysinfo
notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_015 = running on eps01 Mon Jul 17 19:56:21 2017
notes_plat_sysinfo_020 =
notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_030 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_035 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_040 =
notes_plat_sysinfo_045 = From /proc/cpuinfo
notes_plat_sysinfo_050 =    model name : Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz
notes_plat_sysinfo_055 =       2 "physical id"s (chips)
notes_plat_sysinfo_060 =       112 "processors"
notes_plat_sysinfo_065 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_070 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_075 =    caution.)
notes_plat_sysinfo_080 =       cpu cores : 28
notes_plat_sysinfo_085 =       siblings  : 56
notes_plat_sysinfo_090 =       physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_095 =       25 26 27 28 29 30
notes_plat_sysinfo_100 =       physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_105 =       25 26 27 28 29 30
notes_plat_sysinfo_110 =    cache size : 39424 KB
notes_plat_sysinfo_115 =
notes_plat_sysinfo_120 = From /proc/meminfo
notes_plat_sysinfo_125 =    MemTotal:       196699188 kB
notes_plat_sysinfo_130 =    HugePages_Total:       0
notes_plat_sysinfo_135 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    oracle-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_155 =    os-release:
notes_plat_sysinfo_160 =       NAME="Oracle Linux Server"
notes_plat_sysinfo_165 =       VERSION="7.3"
notes_plat_sysinfo_170 =       ID="ol"
notes_plat_sysinfo_175 =       VERSION_ID="7.3"
notes_plat_sysinfo_180 =       PRETTY_NAME="Oracle Linux Server 7.3"
notes_plat_sysinfo_185 =       ANSI_COLOR="0;31"
notes_plat_sysinfo_190 =       CPE_NAME="cpe:/o:oracle:linux:7:3:server"
notes_plat_sysinfo_195 =       HOME_URL="https://linux.oracle.com/"
notes_plat_sysinfo_200 =    redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo)
notes_plat_sysinfo_205 =    system-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_210 =    system-release-cpe: cpe:/o:oracle:linux:7:3:server
notes_plat_sysinfo_215 =
notes_plat_sysinfo_220 = uname -a:
notes_plat_sysinfo_225 =    Linux eps01 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST
notes_plat_sysinfo_230 =    2017 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = run-level 3 Jul 14 11:41
notes_plat_sysinfo_245 =
notes_plat_sysinfo_250 = SPEC is set to:
notes_plat_sysinfo_255 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0
notes_plat_sysinfo_260 =    Filesystem                Type   Size  Used Avail Use% Mounted on
notes_plat_sysinfo_265 =    panfs://36.101.212.1/innl panfs  108T   41T   68T  38% /global/panfs02/innl
notes_plat_sysinfo_270 = Additional information from dmidecode:
notes_plat_sysinfo_275 =
notes_plat_sysinfo_280 =    Warning: Use caution when you interpret this section. The 'dmidecode' program
notes_plat_sysinfo_285 =    reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_290 =    determined", but the intent may not be met, as there are frequent changes to
notes_plat_sysinfo_295 =    hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_300 =
notes_plat_sysinfo_305 =
notes_plat_sysinfo_310 = (End of data from sysinfo program)
hw_cpu_name    = Intel Xeon Platinum 8180
hw_disk        = 108 TB  add more disk info here
hw_memory000   = 187.587 GB fixme: If using DDR3, format is:
hw_memory001   = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
hw_nchips      = 2
prepared_by    = abobyr  (is never output, only tags rawfile)
sw_file        = panfs
sw_os000       = Red Hat Enterprise Linux Server release 7.3
sw_os001 = (Maipo)
sw_os002       = 3.10.0-514.6.2.0.1.el7.x86_64.knl1
sw_state       = Run level 3 (add definition here)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = config/flags/Intel-icc18.0-linux64.xml
hw_cpu_name = Intel Xeon Platinum 8180
hw_disk = 108 TB  add more disk info here
sw_file = panfs
sw_state = Run level 3 (add definition here)
hw_memory000 = 187.587 GB fixme: If using DDR3, format is:
hw_memory001 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
hw_nchips = 2
prepared_by = abobyr  (is never output, only tags rawfile)
sw_os000 = Red Hat Enterprise Linux Server release 7.3
sw_os001 = (Maipo)
sw_os002 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1
notes_plat_sysinfo_000 = Sysinfo program
notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0/Docs/sysinfo
notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_015 = running on eps01 Mon Jul 17 19:56:21 2017
notes_plat_sysinfo_020 =
notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_030 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_035 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_040 =
notes_plat_sysinfo_045 = From /proc/cpuinfo
notes_plat_sysinfo_050 =    model name : Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz
notes_plat_sysinfo_055 =       2 "physical id"s (chips)
notes_plat_sysinfo_060 =       112 "processors"
notes_plat_sysinfo_065 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_070 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_075 =    caution.)
notes_plat_sysinfo_080 =       cpu cores : 28
notes_plat_sysinfo_085 =       siblings  : 56
notes_plat_sysinfo_090 =       physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_095 =       25 26 27 28 29 30
notes_plat_sysinfo_100 =       physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_105 =       25 26 27 28 29 30
notes_plat_sysinfo_110 =    cache size : 39424 KB
notes_plat_sysinfo_115 =
notes_plat_sysinfo_120 = From /proc/meminfo
notes_plat_sysinfo_125 =    MemTotal:       196699188 kB
notes_plat_sysinfo_130 =    HugePages_Total:       0
notes_plat_sysinfo_135 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    oracle-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_155 =    os-release:
notes_plat_sysinfo_160 =       NAME="Oracle Linux Server"
notes_plat_sysinfo_165 =       VERSION="7.3"
notes_plat_sysinfo_170 =       ID="ol"
notes_plat_sysinfo_175 =       VERSION_ID="7.3"
notes_plat_sysinfo_180 =       PRETTY_NAME="Oracle Linux Server 7.3"
notes_plat_sysinfo_185 =       ANSI_COLOR="0;31"
notes_plat_sysinfo_190 =       CPE_NAME="cpe:/o:oracle:linux:7:3:server"
notes_plat_sysinfo_195 =       HOME_URL="https://linux.oracle.com/"
notes_plat_sysinfo_200 =    redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo)
notes_plat_sysinfo_205 =    system-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_210 =    system-release-cpe: cpe:/o:oracle:linux:7:3:server
notes_plat_sysinfo_215 =
notes_plat_sysinfo_220 = uname -a:
notes_plat_sysinfo_225 =    Linux eps01 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST
notes_plat_sysinfo_230 =    2017 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = run-level 3 Jul 14 11:41
notes_plat_sysinfo_245 =
notes_plat_sysinfo_250 = SPEC is set to:
notes_plat_sysinfo_255 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0
notes_plat_sysinfo_260 =    Filesystem                Type   Size  Used Avail Use% Mounted on
notes_plat_sysinfo_265 =    panfs://36.101.212.1/innl panfs  108T   41T   68T  38% /global/panfs02/innl
notes_plat_sysinfo_270 = Additional information from dmidecode:
notes_plat_sysinfo_275 =
notes_plat_sysinfo_280 =    Warning: Use caution when you interpret this section. The 'dmidecode' program
notes_plat_sysinfo_285 =    reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_290 =    determined", but the intent may not be met, as there are frequent changes to
notes_plat_sysinfo_295 =    hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_300 =
notes_plat_sysinfo_305 =
notes_plat_sysinfo_310 = (End of data from sysinfo program)

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = config/flags/Intel-icc18.0-linux64.xml
hw_cpu_name = Intel Xeon Platinum 8180
hw_disk = 108 TB  add more disk info here
sw_file = panfs
sw_state = Run level 3 (add definition here)
hw_memory000 = 187.587 GB fixme: If using DDR3, format is:
hw_memory001 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
hw_nchips = 2
prepared_by = abobyr  (is never output, only tags rawfile)
sw_os000 = Red Hat Enterprise Linux Server release 7.3
sw_os001 = (Maipo)
sw_os002 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1
notes_plat_sysinfo_000 = Sysinfo program
notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0/Docs/sysinfo
notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_015 = running on eps01 Mon Jul 17 19:56:21 2017
notes_plat_sysinfo_020 =
notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_030 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_035 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_040 =
notes_plat_sysinfo_045 = From /proc/cpuinfo
notes_plat_sysinfo_050 =    model name : Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz
notes_plat_sysinfo_055 =       2 "physical id"s (chips)
notes_plat_sysinfo_060 =       112 "processors"
notes_plat_sysinfo_065 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_070 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_075 =    caution.)
notes_plat_sysinfo_080 =       cpu cores : 28
notes_plat_sysinfo_085 =       siblings  : 56
notes_plat_sysinfo_090 =       physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_095 =       25 26 27 28 29 30
notes_plat_sysinfo_100 =       physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_105 =       25 26 27 28 29 30
notes_plat_sysinfo_110 =    cache size : 39424 KB
notes_plat_sysinfo_115 =
notes_plat_sysinfo_120 = From /proc/meminfo
notes_plat_sysinfo_125 =    MemTotal:       196699188 kB
notes_plat_sysinfo_130 =    HugePages_Total:       0
notes_plat_sysinfo_135 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    oracle-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_155 =    os-release:
notes_plat_sysinfo_160 =       NAME="Oracle Linux Server"
notes_plat_sysinfo_165 =       VERSION="7.3"
notes_plat_sysinfo_170 =       ID="ol"
notes_plat_sysinfo_175 =       VERSION_ID="7.3"
notes_plat_sysinfo_180 =       PRETTY_NAME="Oracle Linux Server 7.3"
notes_plat_sysinfo_185 =       ANSI_COLOR="0;31"
notes_plat_sysinfo_190 =       CPE_NAME="cpe:/o:oracle:linux:7:3:server"
notes_plat_sysinfo_195 =       HOME_URL="https://linux.oracle.com/"
notes_plat_sysinfo_200 =    redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo)
notes_plat_sysinfo_205 =    system-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_210 =    system-release-cpe: cpe:/o:oracle:linux:7:3:server
notes_plat_sysinfo_215 =
notes_plat_sysinfo_220 = uname -a:
notes_plat_sysinfo_225 =    Linux eps01 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST
notes_plat_sysinfo_230 =    2017 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = run-level 3 Jul 14 11:41
notes_plat_sysinfo_245 =
notes_plat_sysinfo_250 = SPEC is set to:
notes_plat_sysinfo_255 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0
notes_plat_sysinfo_260 =    Filesystem                Type   Size  Used Avail Use% Mounted on
notes_plat_sysinfo_265 =    panfs://36.101.212.1/innl panfs  108T   41T   68T  38% /global/panfs02/innl
notes_plat_sysinfo_270 = Additional information from dmidecode:
notes_plat_sysinfo_275 =
notes_plat_sysinfo_280 =    Warning: Use caution when you interpret this section. The 'dmidecode' program
notes_plat_sysinfo_285 =    reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_290 =    determined", but the intent may not be met, as there are frequent changes to
notes_plat_sysinfo_295 =    hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_300 =
notes_plat_sysinfo_305 =
notes_plat_sysinfo_310 = (End of data from sysinfo program)

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = config/flags/Intel-icc18.0-linux64.xml
hw_cpu_name = Intel Xeon Platinum 8180
hw_disk = 108 TB  add more disk info here
sw_file = panfs
sw_state = Run level 3 (add definition here)
hw_memory000 = 187.587 GB fixme: If using DDR3, format is:
hw_memory001 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
hw_nchips = 2
prepared_by = abobyr  (is never output, only tags rawfile)
sw_os000 = Red Hat Enterprise Linux Server release 7.3
sw_os001 = (Maipo)
sw_os002 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1
notes_plat_sysinfo_000 = Sysinfo program
notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0/Docs/sysinfo
notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_015 = running on eps01 Mon Jul 17 19:56:21 2017
notes_plat_sysinfo_020 =
notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_030 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_035 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_040 =
notes_plat_sysinfo_045 = From /proc/cpuinfo
notes_plat_sysinfo_050 =    model name : Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz
notes_plat_sysinfo_055 =       2 "physical id"s (chips)
notes_plat_sysinfo_060 =       112 "processors"
notes_plat_sysinfo_065 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_070 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_075 =    caution.)
notes_plat_sysinfo_080 =       cpu cores : 28
notes_plat_sysinfo_085 =       siblings  : 56
notes_plat_sysinfo_090 =       physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_095 =       25 26 27 28 29 30
notes_plat_sysinfo_100 =       physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_105 =       25 26 27 28 29 30
notes_plat_sysinfo_110 =    cache size : 39424 KB
notes_plat_sysinfo_115 =
notes_plat_sysinfo_120 = From /proc/meminfo
notes_plat_sysinfo_125 =    MemTotal:       196699188 kB
notes_plat_sysinfo_130 =    HugePages_Total:       0
notes_plat_sysinfo_135 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    oracle-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_155 =    os-release:
notes_plat_sysinfo_160 =       NAME="Oracle Linux Server"
notes_plat_sysinfo_165 =       VERSION="7.3"
notes_plat_sysinfo_170 =       ID="ol"
notes_plat_sysinfo_175 =       VERSION_ID="7.3"
notes_plat_sysinfo_180 =       PRETTY_NAME="Oracle Linux Server 7.3"
notes_plat_sysinfo_185 =       ANSI_COLOR="0;31"
notes_plat_sysinfo_190 =       CPE_NAME="cpe:/o:oracle:linux:7:3:server"
notes_plat_sysinfo_195 =       HOME_URL="https://linux.oracle.com/"
notes_plat_sysinfo_200 =    redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo)
notes_plat_sysinfo_205 =    system-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_210 =    system-release-cpe: cpe:/o:oracle:linux:7:3:server
notes_plat_sysinfo_215 =
notes_plat_sysinfo_220 = uname -a:
notes_plat_sysinfo_225 =    Linux eps01 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST
notes_plat_sysinfo_230 =    2017 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = run-level 3 Jul 14 11:41
notes_plat_sysinfo_245 =
notes_plat_sysinfo_250 = SPEC is set to:
notes_plat_sysinfo_255 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0
notes_plat_sysinfo_260 =    Filesystem                Type   Size  Used Avail Use% Mounted on
notes_plat_sysinfo_265 =    panfs://36.101.212.1/innl panfs  108T   41T   68T  38% /global/panfs02/innl
notes_plat_sysinfo_270 = Additional information from dmidecode:
notes_plat_sysinfo_275 =
notes_plat_sysinfo_280 =    Warning: Use caution when you interpret this section. The 'dmidecode' program
notes_plat_sysinfo_285 =    reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_290 =    determined", but the intent may not be met, as there are frequent changes to
notes_plat_sysinfo_295 =    hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_300 =
notes_plat_sysinfo_305 =
notes_plat_sysinfo_310 = (End of data from sysinfo program)

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = config/flags/Intel-icc18.0-linux64.xml
hw_cpu_name = Intel Xeon Platinum 8180
hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON
hw_cpu_mhz = 2500
hw_cpu_max_mhz = 3800
hw_fpu = Integrated
hw_ncpuorder = 1,2 chips
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 1 MB I+D on chip per core
hw_tcache = 39424 KB I+D on chip per chip
hw_ocache = None
hw_disk = 108 TB Panasas ActiveStor 14
hw_other = None
hw_accel_model = Intel Xeon Platinum 8180
hw_accel_vendor = Intel
hw_accel_name = Intel Xeon Platinum 8180
hw_accel_type = CPU
hw_accel_connect = N/A
hw_accel_ecc = yes
sw_accel_driver = N/A
sw_file = panfs
sw_state = Run level 3 (default)
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 64-bit
sw_other = FFTW 3.3.6
hw_accel_desc000 = Intel Xeon Scalable Processor
hw_accel_desc005 = SMT ON, Turbo ON
test_sponsor = Intel
license_num = 13
tester = Intel
hw_avail = Jul-2017
sw_avail = Oct-2017
prepared_by = Alexander Bobyr <alexander.bobyr@intel.com>
hw_vendor = Intel
sw_parallel_other = No
hw_nthreadspercore = 2
hw_ncoresperchip = 28
hw_ncores = 56
hw_nchips = 2
hw_memory000 = 192 GB fixme (16 x 12 GB 2Rx4 DDR4-2666
hw_memory005 = ECC Registered)
hw_model000 = Intel Xeon Platinum 8180, 2.50 GHz,
hw_model001 = SMT ON, Turbo ON
sw_compiler000 = C/C++/Fortran: Version 18.0 of Intel Composer XE
sw_compiler001 = for Linux Build
sw_os000 = Red Hat Enterprise Linux Server release 7.3
sw_os001 = (Maipo)
sw_os002 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1
notes_plat_sysinfo_000 = Sysinfo program
notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0/Docs/sysinfo
notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_015 = running on eps01 Mon Jul 17 19:56:21 2017
notes_plat_sysinfo_020 =
notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_030 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_035 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_040 =
notes_plat_sysinfo_045 = From /proc/cpuinfo
notes_plat_sysinfo_050 =    model name : Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz
notes_plat_sysinfo_055 =       2 "physical id"s (chips)
notes_plat_sysinfo_060 =       112 "processors"
notes_plat_sysinfo_065 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_070 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_075 =    caution.)
notes_plat_sysinfo_080 =       cpu cores : 28
notes_plat_sysinfo_085 =       siblings  : 56
notes_plat_sysinfo_090 =       physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_095 =       25 26 27 28 29 30
notes_plat_sysinfo_100 =       physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_105 =       25 26 27 28 29 30
notes_plat_sysinfo_110 =    cache size : 39424 KB
notes_plat_sysinfo_115 =
notes_plat_sysinfo_120 = From /proc/meminfo
notes_plat_sysinfo_125 =    MemTotal:       196699188 kB
notes_plat_sysinfo_130 =    HugePages_Total:       0
notes_plat_sysinfo_135 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    oracle-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_155 =    os-release:
notes_plat_sysinfo_160 =       NAME="Oracle Linux Server"
notes_plat_sysinfo_165 =       VERSION="7.3"
notes_plat_sysinfo_170 =       ID="ol"
notes_plat_sysinfo_175 =       VERSION_ID="7.3"
notes_plat_sysinfo_180 =       PRETTY_NAME="Oracle Linux Server 7.3"
notes_plat_sysinfo_185 =       ANSI_COLOR="0;31"
notes_plat_sysinfo_190 =       CPE_NAME="cpe:/o:oracle:linux:7:3:server"
notes_plat_sysinfo_195 =       HOME_URL="https://linux.oracle.com/"
notes_plat_sysinfo_200 =    redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo)
notes_plat_sysinfo_205 =    system-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_210 =    system-release-cpe: cpe:/o:oracle:linux:7:3:server
notes_plat_sysinfo_215 =
notes_plat_sysinfo_220 = uname -a:
notes_plat_sysinfo_225 =    Linux eps01 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST
notes_plat_sysinfo_230 =    2017 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = run-level 3 Jul 14 11:41
notes_plat_sysinfo_245 =
notes_plat_sysinfo_250 = SPEC is set to:
notes_plat_sysinfo_255 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0
notes_plat_sysinfo_260 =    Filesystem                Type   Size  Used Avail Use% Mounted on
notes_plat_sysinfo_265 =    panfs://36.101.212.1/innl panfs  108T   41T   68T  38% /global/panfs02/innl
notes_plat_sysinfo_270 = Additional information from dmidecode:
notes_plat_sysinfo_275 =
notes_plat_sysinfo_280 =    Warning: Use caution when you interpret this section. The 'dmidecode' program
notes_plat_sysinfo_285 =    reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_290 =    determined", but the intent may not be met, as there are frequent changes to
notes_plat_sysinfo_295 =    hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_300 =
notes_plat_sysinfo_305 =
notes_plat_sysinfo_310 = (End of data from sysinfo program)
notes_000 =Used Environment Variables:
notes_005 =  ENV_KMP_AFFINITY=compact,0 - assign OpenMP Threads continously
notes_010 =  ENV_OMP_NUM_THREADS=112 - limits number of Threads to be started
notes_015 =  ENV_KMP_HW_SUBSET=2S,28C,2T - control Thread distribution accross sockets, cores and hw threads
notes_020 =  ENV_FORT_BUFFERED=true - enables buffered I/O for Fortran
notes_025 =  ENV_OMP_DYNAMIC=FALSE - disable the dynamic adjustment of the number of threads within a team
notes_030 =  ENV_KMP_LIBRARY=turnaround - selects the OpenMP runtime library throughput
notes_035 =  ENV_KMP_BLOCKTIME=infinite - sets the time, in milliseconds, that a thread should wait,
notes_040 =  after completing the execution of a parallel region, before sleeping.

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = config/flags/Intel-icc18.0-linux64.xml
hw_cpu_name = Intel Xeon Platinum 8180
hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON
hw_cpu_mhz = 2500
hw_cpu_max_mhz = 3800
hw_fpu = Integrated
hw_ncpuorder = 1,2 chips
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 1 MB I+D on chip per core
hw_tcache = 39424 KB I+D on chip per chip
hw_ocache = None
hw_disk = 108 TB Panasas ActiveStor 14
hw_other = None
hw_accel_model = Intel Xeon Platinum 8180
hw_accel_vendor = Intel
hw_accel_name = Intel Xeon Platinum 8180
hw_accel_type = CPU
hw_accel_connect = N/A
hw_accel_ecc = yes
sw_accel_driver = N/A
sw_file = panfs
sw_state = Run level 3 (default)
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 64-bit
sw_other = FFTW 3.3.6
hw_accel_desc000 = Intel Xeon Scalable Processor
hw_accel_desc005 = SMT ON, Turbo ON
test_sponsor = Intel
license_num = 13
tester = Intel
hw_avail = Jul-2017
sw_avail = Oct-2017
prepared_by = Alexander Bobyr <alexander.bobyr@intel.com>
hw_vendor = Intel
sw_parallel_other = No
hw_nthreadspercore = 2
hw_ncoresperchip = 28
hw_ncores = 56
hw_nchips = 2
hw_memory000 = 192 GB fixme (16 x 12 GB 2Rx4 DDR4-2666
hw_memory005 = ECC Registered)
hw_model000 = Intel Xeon Platinum 8180, 2.50 GHz,
hw_model001 = SMT ON, Turbo ON
sw_compiler000 = C/C++/Fortran: Version 18.0 of Intel Composer XE
sw_compiler001 = for Linux Build
sw_os000 = Red Hat Enterprise Linux Server release 7.3
sw_os001 = (Maipo)
sw_os002 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1
notes_plat_sysinfo_000 = Sysinfo program
notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0/Docs/sysinfo
notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_015 = running on eps01 Mon Jul 17 19:56:21 2017
notes_plat_sysinfo_020 =
notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_030 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_035 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_040 =
notes_plat_sysinfo_045 = From /proc/cpuinfo
notes_plat_sysinfo_050 =    model name : Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz
notes_plat_sysinfo_055 =       2 "physical id"s (chips)
notes_plat_sysinfo_060 =       112 "processors"
notes_plat_sysinfo_065 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_070 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_075 =    caution.)
notes_plat_sysinfo_080 =       cpu cores : 28
notes_plat_sysinfo_085 =       siblings  : 56
notes_plat_sysinfo_090 =       physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_095 =       25 26 27 28 29 30
notes_plat_sysinfo_100 =       physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_105 =       25 26 27 28 29 30
notes_plat_sysinfo_110 =    cache size : 39424 KB
notes_plat_sysinfo_115 =
notes_plat_sysinfo_120 = From /proc/meminfo
notes_plat_sysinfo_125 =    MemTotal:       196699188 kB
notes_plat_sysinfo_130 =    HugePages_Total:       0
notes_plat_sysinfo_135 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    oracle-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_155 =    os-release:
notes_plat_sysinfo_160 =       NAME="Oracle Linux Server"
notes_plat_sysinfo_165 =       VERSION="7.3"
notes_plat_sysinfo_170 =       ID="ol"
notes_plat_sysinfo_175 =       VERSION_ID="7.3"
notes_plat_sysinfo_180 =       PRETTY_NAME="Oracle Linux Server 7.3"
notes_plat_sysinfo_185 =       ANSI_COLOR="0;31"
notes_plat_sysinfo_190 =       CPE_NAME="cpe:/o:oracle:linux:7:3:server"
notes_plat_sysinfo_195 =       HOME_URL="https://linux.oracle.com/"
notes_plat_sysinfo_200 =    redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo)
notes_plat_sysinfo_205 =    system-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_210 =    system-release-cpe: cpe:/o:oracle:linux:7:3:server
notes_plat_sysinfo_215 =
notes_plat_sysinfo_220 = uname -a:
notes_plat_sysinfo_225 =    Linux eps01 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST
notes_plat_sysinfo_230 =    2017 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = run-level 3 Jul 14 11:41
notes_plat_sysinfo_245 =
notes_plat_sysinfo_250 = SPEC is set to:
notes_plat_sysinfo_255 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0
notes_plat_sysinfo_260 =    Filesystem                Type   Size  Used Avail Use% Mounted on
notes_plat_sysinfo_265 =    panfs://36.101.212.1/innl panfs  108T   41T   68T  38% /global/panfs02/innl
notes_plat_sysinfo_270 = Additional information from dmidecode:
notes_plat_sysinfo_275 =
notes_plat_sysinfo_280 =    Warning: Use caution when you interpret this section. The 'dmidecode' program
notes_plat_sysinfo_285 =    reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_290 =    determined", but the intent may not be met, as there are frequent changes to
notes_plat_sysinfo_295 =    hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_300 =
notes_plat_sysinfo_305 =
notes_plat_sysinfo_310 = (End of data from sysinfo program)
notes_000 =Used Environment Variables:
notes_005 =  ENV_KMP_AFFINITY=compact,0 - assign OpenMP Threads continously
notes_010 =  ENV_OMP_NUM_THREADS=112 - limits number of Threads to be started
notes_015 =  ENV_KMP_HW_SUBSET=2S,28C,2T - control Thread distribution accross sockets, cores and hw threads
notes_020 =  ENV_FORT_BUFFERED=true - enables buffered I/O for Fortran
notes_025 =  ENV_OMP_DYNAMIC=FALSE - disable the dynamic adjustment of the number of threads within a team
notes_030 =  ENV_KMP_LIBRARY=turnaround - selects the OpenMP runtime library throughput
notes_035 =  ENV_KMP_BLOCKTIME=infinite - sets the time, in milliseconds, that a thread should wait,
notes_040 =  after completing the execution of a parallel region, before sleeping.

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = https://www.spec.org/accel/flags/Intel-icc18.0-linux64.20170802.00.xml
hw_cpu_name = Intel Xeon Platinum 8180
hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON
hw_cpu_mhz = 2500
hw_cpu_max_mhz = 3800
hw_fpu = Integrated
hw_ncpuorder = 1,2 chips
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 1 MB I+D on chip per core
hw_tcache = 38.5 MB I+D on chip per chip
hw_ocache = None
hw_disk = 108 TB Panasas ActiveStor 14
hw_other = None
hw_accel_model = Intel Xeon Platinum 8180
hw_accel_vendor = Intel
hw_accel_name = Intel Xeon Platinum 8180
hw_accel_type = CPU
hw_accel_connect = N/A
hw_accel_ecc = yes
sw_accel_driver = N/A
sw_file = panfs
sw_state = Run level 3 (default)
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 64-bit
sw_other = FFTW 3.3.6
hw_accel_desc000 = 2 x Intel Xeon Platinum 8180, 2.50 GHz, SMT ON,
hw_accel_desc001 = Turbo ON
test_sponsor = Intel
license_num = 13
tester = Intel
hw_avail = Jul-2017
sw_avail = Oct-2017
prepared_by = Alexander Bobyr <alexander.bobyr@intel.com>
hw_vendor = Intel
sw_parallel_other = No
hw_nthreadspercore = 2
hw_ncoresperchip = 28
hw_ncores = 56
hw_nchips = 2
hw_memory000 = 192 GB (16 x 12 GB 2Rx4 DDR4-2666
hw_memory005 = ECC Registered)
hw_model000 = Intel Server System R2208WFTZS (2 x Intel Xeon
hw_model001 = Platinum 8180, 2.50 GHz, SMT ON, Turbo ON)
sw_compiler000 = C/C++/Fortran: Version 18.0 of Intel Composer XE
sw_compiler001 = for Linux Build
sw_os000 = Red Hat Enterprise Linux Server release 7.3
sw_os001 = (Maipo)
sw_os002 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1
notes_plat_sysinfo_000 = Sysinfo program
notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0/Docs/sysinfo
notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_015 = running on eps01 Mon Jul 17 19:56:21 2017
notes_plat_sysinfo_020 =
notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_030 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_035 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_040 =
notes_plat_sysinfo_045 = From /proc/cpuinfo
notes_plat_sysinfo_050 =    model name : Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz
notes_plat_sysinfo_055 =       2 "physical id"s (chips)
notes_plat_sysinfo_060 =       112 "processors"
notes_plat_sysinfo_065 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_070 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_075 =    caution.)
notes_plat_sysinfo_080 =       cpu cores : 28
notes_plat_sysinfo_085 =       siblings  : 56
notes_plat_sysinfo_090 =       physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_095 =       25 26 27 28 29 30
notes_plat_sysinfo_100 =       physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24
notes_plat_sysinfo_105 =       25 26 27 28 29 30
notes_plat_sysinfo_110 =    cache size : 39424 KB
notes_plat_sysinfo_115 =
notes_plat_sysinfo_120 = From /proc/meminfo
notes_plat_sysinfo_125 =    MemTotal:       196699188 kB
notes_plat_sysinfo_130 =    HugePages_Total:       0
notes_plat_sysinfo_135 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    oracle-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_155 =    os-release:
notes_plat_sysinfo_160 =       NAME="Oracle Linux Server"
notes_plat_sysinfo_165 =       VERSION="7.3"
notes_plat_sysinfo_170 =       ID="ol"
notes_plat_sysinfo_175 =       VERSION_ID="7.3"
notes_plat_sysinfo_180 =       PRETTY_NAME="Oracle Linux Server 7.3"
notes_plat_sysinfo_185 =       ANSI_COLOR="0;31"
notes_plat_sysinfo_190 =       CPE_NAME="cpe:/o:oracle:linux:7:3:server"
notes_plat_sysinfo_195 =       HOME_URL="https://linux.oracle.com/"
notes_plat_sysinfo_200 =    redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo)
notes_plat_sysinfo_205 =    system-release: Oracle Linux Server release 7.3
notes_plat_sysinfo_210 =    system-release-cpe: cpe:/o:oracle:linux:7:3:server
notes_plat_sysinfo_215 =
notes_plat_sysinfo_220 = uname -a:
notes_plat_sysinfo_225 =    Linux eps01 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST
notes_plat_sysinfo_230 =    2017 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = run-level 3 Jul 14 11:41
notes_plat_sysinfo_245 =
notes_plat_sysinfo_250 = SPEC is set to:
notes_plat_sysinfo_255 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_skx2S8180_18.0
notes_plat_sysinfo_260 =    Filesystem                Type   Size  Used Avail Use% Mounted on
notes_plat_sysinfo_265 =    panfs://36.101.212.1/innl panfs  108T   41T   68T  38% /global/panfs02/innl
notes_plat_sysinfo_270 = Additional information from dmidecode:
notes_plat_sysinfo_275 =
notes_plat_sysinfo_280 =    Warning: Use caution when you interpret this section. The 'dmidecode' program
notes_plat_sysinfo_285 =    reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_290 =    determined", but the intent may not be met, as there are frequent changes to
notes_plat_sysinfo_295 =    hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_300 =
notes_plat_sysinfo_305 =
notes_plat_sysinfo_310 = (End of data from sysinfo program)
notes_000 =Used Environment Variables:
notes_005 =  ENV_KMP_AFFINITY=compact,0 - assign OpenMP Threads continously
notes_010 =  ENV_OMP_NUM_THREADS=112 - limits number of Threads to be started
notes_015 =  ENV_KMP_HW_SUBSET=2S,28C,2T - control Thread distribution accross sockets, cores and hw threads
notes_020 =  ENV_FORT_BUFFERED=true - enables buffered I/O for Fortran
notes_025 =  ENV_OMP_DYNAMIC=FALSE - disable the dynamic adjustment of the number of threads within a team
notes_030 =  ENV_KMP_LIBRARY=turnaround - selects the OpenMP runtime library throughput
notes_035 =  ENV_KMP_BLOCKTIME=infinite - sets the time, in milliseconds, that a thread should wait,
notes_040 =  after completing the execution of a parallel region, before sleeping.