Fujitsu FUJITSU Server PRIMERGY RX2530 M7 | SPECpower_ssj2008 = 13,704 overall ssj_ops/watt | ||||
Test Sponsor: | Fujitsu | SPEC License #: | 19 | Test Method: | Single Node |
Tested By: | Fujitsu | Test Location: | Kawasaki, Kanagawa, Japan | Test Date: | Jan 31, 2023 |
Hardware Availability: | Mar-2023 | Software Availability: | Aug-2022 | Publication: | Mar 15, 2023 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 100.1% | 15,820,662 | 1,036 | 15,265 |
90% | 90.1% | 14,236,661 | 926 | 15,371 |
80% | 79.9% | 12,635,148 | 791 | 15,982 |
70% | 70.0% | 11,066,053 | 665 | 16,644 |
60% | 60.0% | 9,478,897 | 583 | 16,251 |
50% | 50.0% | 7,900,421 | 527 | 14,994 |
40% | 40.0% | 6,324,823 | 475 | 13,310 |
30% | 30.0% | 4,735,725 | 429 | 11,031 |
20% | 20.0% | 3,166,440 | 386 | 8,205 |
10% | 10.0% | 1,583,224 | 340 | 4,654 |
Active Idle | 0 | 186 | 0 | |
∑ssj_ops / ∑power = | 13,704 |
Set Identifier: | RX2530M7 |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | Single Node |
Hardware | |
---|---|
Hardware Vendor: | Fujitsu |
Model: | FUJITSU Server PRIMERGY RX2530 M7 |
Form Factor: | 2U |
CPU Name: | Intel Xeon Platinum 8490H |
CPU Characteristics: | 60-Core, 1.9GHz, 112.5MB L3 Cache |
CPU Frequency (MHz): | 1900 |
CPU(s) Enabled: | 120 cores, 2 chips, 60 cores/chip |
Hardware Threads: | 240 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 48 KB D on chip per core |
Secondary Cache: | 2 MB I+D on chip per core |
Tertiary Cache: | 115200 KB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 512 |
# and size of DIMM: | 16 x 32768 MB |
Memory Details: | 16 x 32 GB 2Rx8 PC5-4800B; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H, 1J, 1K, 1L, 1M, 1N, 1P, 1Q, 1R populated |
Power Supply Quantity and Rating (W): | 2 x 900 |
Power Supply Details: | S26113-E629-V50-1 |
Disk Drive: | 1 x SSD M.2 240GB, S26361-F5787-E240 |
Disk Controller: | Integrated SATA Controller |
# and type of Network Interface Cards (NICs) Installed: | 2 x Intel I210 Gigabit Network Connection (onboard) |
NICs Enabled in Firmware / OS / Connected: | 1/1/2 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Power saver |
Operating System (OS): | Windows Server 2022 Standard |
OS Version: | Version 21H2, OS build 20348.169 |
Filesystem: | ntfs |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.16.1+1-LTS, mixed mode) |
JVM Command-line Options: | -server -Xmn1500m -Xms1625m -Xmx1625m -XX:+UseLargePages -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=2 -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:-UseAdaptiveSizePolicy -XX:+UseParallelOldGC -XX:FreqInlineSize=2500 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:-ThreadLocalHandshakes -XX:UseAVX=0 |
JVM Affinity: | start /NODE[0-7] /AFFINITY [0x3, 0xC, 0x30, 0xC0, 0x300, 0xC00, 0x3000, 0xC000, 0x30000, 0xC0000, 0x300000, 0xC00000, 0x3000000, 0xC000000, 0x30000000] |
JVM Instances: | 120 |
JVM Initial Heap (MB): | 1625 |
JVM Maximum Heap (MB): | 1625 |
JVM Address Bits: | 64 |
Boot Firmware Version: | R1.10.0 |
Management Firmware Version: | 2.00S |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | Fujitsu |
Model: | PRIMERGY RX2530 M2 |
CPU Description: | 2x Intel Xeon E5-2643 v4 |
Memory amount (GB): | 64 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2012 R2 Standard |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 25.211-b12, mixed mode), version 1.8.0_211 |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Hioki |
Model: | PW3336 |
Serial Number: | 170134584 |
Connectivity: | RS-232 |
Input Connection: | Default |
Metrology Institute: | AIST (National Institute of Advanced Science and Technology) |
Accredited by: | Kyosai Technos Co.,Ltd. |
Calibration Label: | CF223000538 |
Date of Calibration: | 14-Mar-2022 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.10.0-82175bac-20220817 |
Setup Description: | Connected to PSU 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | Watchport Virtual Port 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main air intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 1,036 | 21.8 |
90% | 926 | 21.8 |
80% | 791 | 21.8 |
70% | 665 | 21.7 |
60% | 583 | 21.7 |
50% | 527 | 21.6 |
40% | 475 | 21.6 |
30% | 429 | 21.4 |
20% | 386 | 21.4 |
10% | 340 | 21.4 |
Active Idle | 186 | 21.4 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
200V / 50 Hz / 1 phase / 2 wires | 21.4 | 11 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 15,794,337 | ||
Calibration 2 | 15,789,403 | ||
Calibration 3 | 15,822,721 | ||
ssj_ops@calibrated=15,806,062 | |||
100% | 100.1% | 15,806,062 | 15,820,662 |
90% | 90.1% | 14,225,456 | 14,236,661 |
80% | 79.9% | 12,644,849 | 12,635,148 |
70% | 70.0% | 11,064,243 | 11,066,053 |
60% | 60.0% | 9,483,637 | 9,478,897 |
50% | 50.0% | 7,903,031 | 7,900,421 |
40% | 40.0% | 6,322,425 | 6,324,823 |
30% | 30.0% | 4,741,819 | 4,735,725 |
20% | 20.0% | 3,161,212 | 3,166,440 |
10% | 10.0% | 1,580,606 | 1,583,224 |
Active Idle | 0 | 0 |