Hewlett Packard Enterprise ProLiant DL385 Gen10 | SPECpower_ssj2008 = 11,044 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Mar 16, 2018 |
Hardware Availability: | Jan-2018 | Software Availability: | Oct-2017 | Publication: | May 1, 2018 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.8% | 4,295,252 | 298 | 14,423 |
90% | 89.9% | 3,866,000 | 271 | 14,244 |
80% | 79.8% | 3,433,541 | 248 | 13,871 |
70% | 69.9% | 3,009,106 | 220 | 13,706 |
60% | 60.0% | 2,580,804 | 199 | 12,969 |
50% | 49.9% | 2,148,432 | 193 | 11,110 |
40% | 40.0% | 1,720,665 | 179 | 9,607 |
30% | 30.0% | 1,290,277 | 165 | 7,817 |
20% | 20.0% | 859,238 | 150 | 5,712 |
10% | 10.0% | 430,149 | 136 | 3,174 |
Active Idle | 0 | 81.1 | 0 | |
∑ssj_ops / ∑power = | 11,044 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL385 Gen10 |
Form Factor: | 2U |
CPU Name: | AMD EPYC 7601 2.20 GHz |
CPU Characteristics: | 32-Core, 2.20GHz 64MB L3 Cache |
CPU Frequency (MHz): | 2200 |
CPU(s) Enabled: | 64 cores, 2 chips, 32 cores/chip |
Hardware Threads: | 128 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 512 KB I+D on chip per core |
Tertiary Cache: | 64 MB I+D on chip per core |
Other Cache: | None |
Memory Amount (GB): | 128 |
# and size of DIMM: | 16 x 8192 MB |
Memory Details: | 8GB 1Rx8 PC4-2666V-R slots 1, 3, 5, 7, 10, 12, 14 & 16 on each socket |
Power Supply Quantity and Rating (W): | 1 x 800 |
Power Supply Details: | HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) |
Disk Drive: | 1 x HPE 480GB SATA M.2 (880877-B21) |
Disk Controller: | embedded SATA |
# and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 4-port 331i Adapter |
NICs Enabled in Firmware / OS / Connected: | 4/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | 1 x HPE High Performance Fan kit (867810-B21) |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Windows Server 2012 R2 Datacenter |
OS Version: | Version 6.3 (Build 9600) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmx6656m -Xms6656m -Xmn4500m -XX:SurvivorRatio=15 -XX:InlineSmallCode=8000 -XX:FreqInlineSize=8000 -XX:+UseLargePages -XX:+UseBiasedLocking -XX:ParallelGCThreads=8 -XX:+UseParallelOldGC -XX:+AggressiveOpts -XX:+OptimizeStringConcat -XX:AllocatePrefetchLines=7 -XX:MaxInlineSize=80 -XX:LoopUnrollLimit=30 -XX:AllocatePrefetchDistance=192 -XX:InitialTenuringThreshold=10 |
JVM Affinity: | start /NODE[0,1,2,3,4,5,6,7] /AFFINITY [0xFF, 0xFF00] |
JVM Instances: | 16 |
JVM Initial Heap (MB): | 6656 |
JVM Maximum Heap (MB): | 6656 |
JVM Address Bits: | 64 |
Boot Firmware Version: | A40 v1.20 (01/12/2018) |
Management Firmware Version: | 1.20 Dec 15 2017 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | HPE Service Pack for ProLiant (SPP) Version 2017.10.1, Microsoft kb4025334 |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen9 |
CPU Description: | 2x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2012 R2 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_161-b12 (build 25.161-b12, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT310E |
Serial Number: | C2QM22002V |
Connectivity: | Yokogawa USB |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-D537U-20-1 |
Date of Calibration: | 28-Jul-2017 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.1-260d064e-20161220 |
Setup Description: | SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 298 | 21.7 |
90% | 271 | 21.8 |
80% | 248 | 21.8 |
70% | 220 | 21.7 |
60% | 199 | 21.7 |
50% | 193 | 21.6 |
40% | 179 | 21.4 |
30% | 165 | 21.4 |
20% | 150 | 21.6 |
10% | 136 | 21.6 |
Active Idle | 81.1 | 21.6 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
210V / 60 Hz / 1 phase / 2 wires | 21.4 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 4,301,156 | ||
Calibration 2 | 4,303,561 | ||
Calibration 3 | 4,300,393 | ||
ssj_ops@calibrated=4,301,977 | |||
100% | 99.8% | 4,301,977 | 4,295,252 |
90% | 89.9% | 3,871,779 | 3,866,000 |
80% | 79.8% | 3,441,581 | 3,433,541 |
70% | 69.9% | 3,011,384 | 3,009,106 |
60% | 60.0% | 2,581,186 | 2,580,804 |
50% | 49.9% | 2,150,988 | 2,148,432 |
40% | 40.0% | 1,720,791 | 1,720,665 |
30% | 30.0% | 1,290,593 | 1,290,277 |
20% | 20.0% | 860,395 | 859,238 |
10% | 10.0% | 430,198 | 430,149 |
Active Idle | 0 | 0 |