SPECpower_ssj2008 Copyright (C) 2007-2011 Standard Performance Evaluation Corporation Hewlett-Packard Company ProLiant DL580 G5 (Historical) SPECpower_ssj2008 = 489 overall ssj_ops/watt Test Sponsor: Intel Corp. SPEC License #: 3184 Tested By: Principled Technologies, Inc. Test Location: Durham, NC, USA Test Date: Sep 2, 2010 Publication: Feb 23, 2011 Hardware Availability: Jan-2008 Software Availability: May-2009 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.5% | 506,388 | 627 | 808 90% | 90.0% | 458,389 | 611 | 750 80% | 80.1% | 407,494 | 591 | 690 70% | 70.1% | 356,984 | 566 | 631 60% | 60.0% | 305,461 | 538 | 568 50% | 49.7% | 252,771 | 511 | 495 40% | 40.1% | 203,897 | 490 | 416 30% | 29.8% | 151,489 | 472 | 321 20% | 20.2% | 102,587 | 455 | 226 10% | 10.1% | 51,498 | 438 | 118 Active Idle | 0 | 418 | 0 sum of ssj_ops / sum of power = | 489 System Under Test Set: 'sut' Set Identifier: sut Set Description: ProLiant DL580 G5 # of Identical Nodes: 1 Comment: None HARDWARE Hardware Vendor: Hewlett-Packard Company Model: ProLiant DL580 G5 (Historical) Form Factor: 4U CPU Name: Intel Xeon Processor E7330 CPU Characteristics: Quad-Core, 2.40 GHz, 6 MB L2 Cache, 1066 MHz system bus CPU Frequency (MHz): 2400 CPU(s) Enabled: 16 cores, 4 chips, 4 cores/chip Hardware Threads: 16 (1 / core) CPU(s) Orderable: 4 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 6 MB I+D on chip per chip Tertiary Cache: None Other Cache: None Memory Amount (GB): 64 # and size of DIMM: 16 x 4096 MB Memory Details: 4GB 2Rx4 PC2-5300F ECC CL5; all slots populated Power Supply Quantity and Rating 2 x 1200 (W): Power Supply Details: HP part #438202-001 Disk Drive: 2 x 72GB 15K RPM SAS RAID 1 Disk Controller: HP Smart Array P400 with 512MB RAM # and type of Network Interface 2 x NC373i Multifunction Gigabit Network Cards (NICs) Installed: Adapters NICs Enabled in Firmware / OS / 2/2/1 Connected: Network Speed (Mbit): 1000 Keyboard: KVM Mouse: KVM Monitor: KVM Optical Drives: Yes Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): Microsoft Windows Server 2003 R2, Enterprise x64 Edition OS Version: SP2, Build 3790 Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Oracle JRockit(R) (build P28.0.0-29-114096-1.6.0_11-20090427-1759-win dows-x86_64, compiled mode) JVM Command-line Options: -Xms3700m -Xmx3700m -Xns3200m -XXaggressive -XXlargePages -XXthroughputCompaction -XXcallprofiling -XXlazyUnlocking -Xgc:genpar -XXgcthreads:2 -XXtlasize:min=4k,preferred=512k -XX:+UseStringCache JVM Affinity: start /affinity [3, C, 30, C0, 300, C00, 3000, C000] JVM Instances: 8 JVM Initial Heap (MB): 3700 JVM Maximum Heap (MB): 3700 JVM Address Bits: 64 Boot Firmware Version: P61 2009.07.10 Management Firmware Version: 1.50 03/12/2008 Workload Version: SSJ 1.2.6 Director Location: Controller Other Software: None Boot Firmware Settings Hardware Prefetcher disabled in BIOS, Adjacent Cache Line Prefetch disabled in BIOS, HP Dynamic Power Savings Mode Enabled in BIOS Management Firmware Settings Default System Under Test Notes * Each JVM instance was affinitized to a pair of cores in a socket. * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Hard disk turned off after 1 minute * OS Power Scheme * Power Option: Always On Controller System HARDWARE Hardware Vendor: Super Micro Computer, Inc. Model: Supermicro 6025W-NTR+V CPU Description: Intel Xeon Processor E5472 Memory amount (GB): 16 SOFTWARE Operating System (OS): Microsoft Windows Server 2003, Enterprise Edition, Service Pack 2 JVM Vendor: BEA Systems, Inc. JVM Version: BEA JRockit(R) (build R27.5.0-110_o-99226-1.5.0_14-20080528-1505-w indows-ia32, compiled mode) CCS Version: 1.2.4 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Electric International Pte. Ltd. Model: WT210 Serial Number: 91GB45373 Connectivity: RS-232 Input Connection: Default Calibration Institute: NIST Accredited by: Davis Calibration Calibration Label: 07-1673 Date of Calibration: 28-Jul-2010 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.4.0-7071d9e7 Setup Description: SUT Power Supply TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.10.26.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 50 mm in front of SUT main air intake Notes Used USB-to-Serial converter, Model Sabrent SBT-USC1M (driver version 2.0.2.1), to connect power analyzer to the controller. This benchmark result is intended to provide perspective on past power and/or performance using the historical hardware and/or software described on this result page. The system as described on this result page was formerly generally available. At the time of this publication, it may not be shipping, and/or may not be supported, and/or may fail to meet other tests of General Availability described in the SPEC OSG Policy document, http://www.spec.org/osg/policy.html This measured result may not be representative of the result that would be measured were this benchmark run with hardware and software available as of the publication date. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 627 | 21.1 90% | 611 | 21.0 80% | 591 | 21.0 70% | 566 | 20.9 60% | 538 | 21.0 50% | 511 | 21.1 40% | 490 | 21.1 30% | 472 | 21.1 20% | 455 | 21.0 10% | 438 | 21.0 Active Idle | 418 | 21.0 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 20.9 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20110131-00343-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 508,161 Calibration 2 | | | 509,079 Calibration 3 | | | 509,010 ssj_ops@calibrated=509,045 100% | 99.5% | 509,045 | 506,388 90% | 90.0% | 458,140 | 458,389 80% | 80.1% | 407,236 | 407,494 70% | 70.1% | 356,331 | 356,984 60% | 60.0% | 305,427 | 305,461 50% | 49.7% | 254,522 | 252,771 40% | 40.1% | 203,618 | 203,897 30% | 29.8% | 152,713 | 151,489 20% | 20.2% | 101,809 | 102,587 10% | 10.1% | 50,904 | 51,498 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20110131-00343.user-296d48754e.txt) for additional details. Copyright (C) 2007-2011 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.8, June 24, 2009]