NEC Corporation Express5800/R140b-4 | SPECpower_ssj2008 = 1,314 overall ssj_ops/watt | ||||
Test Sponsor: | NEC Corporation | SPEC License #: | 9006 | Test Method: | Single Node |
Tested By: | NEC Corporation | Test Location: | Fuchu, Tokyo, Japan | Test Date: | Dec 4, 2010 |
Hardware Availability: | May-2010 | Software Availability: | Sep-2010 | Publication: | Jan 4, 2011 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.4% | 1,862,600 | 913 | 2,040 |
90% | 90.0% | 1,687,471 | 878 | 1,923 |
80% | 79.8% | 1,496,387 | 840 | 1,782 |
70% | 70.0% | 1,311,952 | 801 | 1,637 |
60% | 60.2% | 1,128,201 | 762 | 1,480 |
50% | 50.0% | 937,542 | 718 | 1,306 |
40% | 39.9% | 747,806 | 673 | 1,111 |
30% | 29.9% | 559,804 | 628 | 892 |
20% | 20.0% | 375,170 | 583 | 644 |
10% | 10.0% | 187,968 | 540 | 348 |
Active Idle | 0 | 498 | 0 | |
∑ssj_ops / ∑power = | 1,314 |
Set Identifier: | sut |
Set Description: | Express5800/R140b-4 (Intel Xeon X7560, 2.26 GHz) |
# of Identical Nodes: | 1 |
Comment: | None |
Hardware | |
---|---|
Hardware Vendor: | NEC Corporation |
Model: | Express5800/R140b-4 |
Form Factor: | 4U |
CPU Name: | Intel Xeon X7560 |
CPU Characteristics: | Octa-Core, 2.26 GHz, 24 MB L3 Cache |
CPU Frequency (MHz): | 2266 |
CPU(s) Enabled: | 32 cores, 4 chips, 8 cores/chip |
Hardware Threads: | 64 (2 / core) |
CPU(s) Orderable: | 2,4 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
Tertiary Cache: | 24 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 128 |
# and size of DIMM: | 16 x 8192 MB |
Memory Details: | 8GB 2Rx4 PC3-10600R ECC CL9; slots DIMM 1A, DIMM 1B, DIMM 1C and DIMM 1D populated on each Memory Back Board |
Power Supply Quantity and Rating (W): | 2 x 850 |
Power Supply Details: | Delta DPS-850FB |
Disk Drive: | 1 x 50GB SSD SATA, NEC P/N:N8150-703 |
Disk Controller: | RAID Controller, NEC P/N:N8103-130 |
# and type of Network Interface Cards (NICs) Installed: | 2 x Integrated Intel 82576 Gigabit Dual Port Ethernet Controller |
NICs Enabled in Firmware / OS / Connected: | 4/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | 1 x Additional Memory Back Board, NEC P/N:N8102-345 |
Software | |
---|---|
Power Management: | Power saver |
Operating System (OS): | Microsoft Windows Server 2008 Enterprise x64 Edition |
OS Version: | SP2 |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM on Windows, version 1.6.0_21 Performance Release |
JVM Command-line Options: | -Xms3600m -Xmx3600m -Xmn3300m -XX:+AggressiveOpts -XX:+UseBiasedLocking -XX:+UseStringCache -XX:+OptimizeStringConcat -XX:+UseCompressedStrings -XX:+UseParallelOldGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseCompressedOops -XX:+AlwaysPreTouch -XX:AllocatePrefetchDistance=192 -XX:AllocatePrefetchLines=4 -XX:SurvivorRatio=50 -XX:TargetSurvivorRatio=90 -XX:InlineSmallCode=5500 -XX:MaxInlineSize=220 -XX:FreqInlineSize=2500 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 |
JVM Affinity: | start /affinity [3,C,30,C0,...,3000000000000000,C000000000000000] |
JVM Instances: | 32 |
JVM Initial Heap (MB): | 3600 |
JVM Maximum Heap (MB): | 3600 |
JVM Address Bits: | 64 |
Boot Firmware Version: | 1.0.0024 |
Management Firmware Version: | 01.13 |
Workload Version: | SSJ 1.2.6 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | NEC Corporation |
Model: | Express5800/R120a-2 |
CPU Description: | Intel Xeon X5550 |
Memory amount (GB): | 4 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2008 Standard Edition Service Pack 2 |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle JRockit(R) (build R28.0.1-21-133393-1.6.0_20-20100512-2132-windows-ia32, compiled mode) |
CCS Version: | 1.2.4 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa Electric International Pte. Ltd. |
Model: | WT210 |
Serial Number: | 91H928024 |
Connectivity: | RS-232C |
Input Connection: | Default |
Calibration Institute: | AIST (National Institute of Advanced Industrial Science and Technology) |
Accredited by: | JQA (Japan Quality Assurance Organization) |
Calibration Label: | 150-95429 |
Date of Calibration: | 4-Mar-2010 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.4.0-7071d9e7 |
Setup Description: | None |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.30.2.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | None |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 913 | 20.9 |
90% | 878 | 20.9 |
80% | 840 | 21.0 |
70% | 801 | 20.9 |
60% | 762 | 20.9 |
50% | 718 | 20.9 |
40% | 673 | 21.0 |
30% | 628 | 21.0 |
20% | 583 | 20.9 |
10% | 540 | 20.9 |
Active Idle | 498 | 20.9 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
202V / 50 Hz / 1 phase / 2 wires | 20.9 | 52 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 1,855,233 | ||
Calibration 2 | 1,873,923 | ||
Calibration 3 | 1,875,478 | ||
ssj_ops@calibrated=1,874,701 | |||
100% | 99.4% | 1,874,701 | 1,862,600 |
90% | 90.0% | 1,687,231 | 1,687,471 |
80% | 79.8% | 1,499,760 | 1,496,387 |
70% | 70.0% | 1,312,290 | 1,311,952 |
60% | 60.2% | 1,124,820 | 1,128,201 |
50% | 50.0% | 937,350 | 937,542 |
40% | 39.9% | 749,880 | 747,806 |
30% | 29.9% | 562,410 | 559,804 |
20% | 20.0% | 374,940 | 375,170 |
10% | 10.0% | 187,470 | 187,968 |
Active Idle | 0 | 0 |