This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 1036 |
---|---|
SPECfp_rate_base95 | 984 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 6 | 150 | 1336 | 6 | 136 | 1466 |
102.swim | 6 | 270 | 1721 | 6 | 243 | 1909 |
103.su2cor | 6 | 112 | 675 | 6 | 111 | 680 |
104.hydro2d | 6 | 189 | 684 | 6 | 184 | 705 |
107.mgrid | 6 | 130 | 1038 | 6 | 129 | 1050 |
110.applu | 6 | 233 | 510 | 6 | 226 | 526 |
125.turb3d | 6 | 266 | 832 | 6 | 265 | 836 |
141.apsi | 6 | 86.6 | 1310 | 6 | 82 | 1391 |
145.fpppp | 6 | 438 | 1184 | 6 | 408 | 1270 |
146.wave5 | 6 | 138 | 1173 | 6 | 124 | 1306 |
SPECfp_rate_base95 | 984 | |||||
SPECfp_rate95 | 1036 |
Tester Information:
SPEC License #: | 6 |
---|---|
Tested By: | Sun, Menlo Park |
Test Date: | Feb-98 |
Hardware Avail: | Mar-98 |
Software Avail: | Aug-98 |
Hardware Information:
Model Name: | Sun Enterprise 3000/6 |
---|---|
CPU: | 336MHz UltraSPARC II |
FPU: | Integrated |
Number of CPU(s): | 6 |
Primary Cache: | 16KBI+16KBD on chip |
Secondary Cache: | 4MB(I+D) off chip |
Other Cache: | None |
Memory: | 4GB |
Disk Subsystem: | 4 x 4.2GB |
Other Hardware: | Fast Ethernet |
Software Information:
Operating System: | Solaris 2.6 |
---|---|
Compiler: | Sun f77 5.0 |
File System: | UFS |
System State: | Multiuser |
Notes:
STD = -fast -xarch=v8plusa INV = -Qoption iropt -O4+invccexp BCOPY = -Qoption iropt -O4+bcopy Baseline: ${STD} -fsimple=2 -xprefetch 101.tomcatv: ${STD} -xpad=local:23 -xprefetch 102.swim: ${STD} -xpad=common:15 -xprefetch -fsimple=2 103.su2cor: ${STD} -xvector -Qoption cg -Qms_pipe+nfll=5 -fsimple=2 ${BCOPY} -lmvec 104.hydro2d: ${STD} -xprefetch -Qoption iropt -O4+pde -fsimple=2 -xprofile=use 107.mgrid: ${STD} -xprefetch -fsimple=2 ${BCOPY} 110.applu: ${STD} -Qoption iropt -O4+ddint+scalarrep,-ldstr -fsimple=2 125.turb3d: ${STD} -stackvar -xpad -fsimple=2 ${INV} 141.apsi: ${STD} -fsimple=2 -stackvar -Qoption iropt -Si36 ${INV} -Qoption iropt -O4+algassoc 145.fpppp: ${STD} -xO5 -xsafe=mem -fsimple=2 -Qoption iropt -O4+algassoc -xprofile=use 146.wave5: ${STD} -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Wed Apr 29 15:13:54 PDT 1998First published at SPEC.org on 17-Mar-1998