This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 114 |
---|---|
SPECfp_rate_base95 | 108 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 2 | 430 | 155 | 2 | 387 | 172 |
102.swim | 2 | 734 | 211 | 2 | 588 | 263 |
103.su2cor | 2 | 448 | 56.2 | 2 | 412 | 61.1 |
104.hydro2d | 2 | 760 | 56.9 | 2 | 752 | 57.5 |
107.mgrid | 2 | 397 | 113 | 2 | 402 | 112 |
110.applu | 2 | 534 | 74.1 | 2 | 522 | 75.8 |
125.turb3d | 2 | 685 | 108 | 2 | 668 | 110 |
141.apsi | 2 | 348 | 109 | 4 | 722 | 105 |
145.fpppp | 2 | 1191 | 145 | 4 | 2233 | 155 |
146.wave5 | 2 | 377 | 143 | 2 | 353 | 153 |
SPECfp_rate_base95 | 108 | |||||
SPECfp_rate95 | 114 |
Tester Information:
SPEC License #: | 6 |
---|---|
Tested By: | Sun, Palo Alto |
Test Date: | Dec-97 |
Hardware Avail: | Jan-98 |
Software Avail: | May-98 |
Hardware Information:
Model Name: | Ultra 10 300MHz |
---|---|
CPU: | 300MHz UltraSPARC-IIi |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 16KBI+16KBD on chip |
Secondary Cache: | 0.5MB(I+D) off chip |
Other Cache: | None |
Memory: | 512MB |
Disk Subsystem: | 2 x 4.01GB |
Other Hardware: | Fast Ethernet |
System clock frequency: 100 MHz |
Software Information:
Operating System: | Solaris 2.5.1 HW 1197 |
---|---|
Compiler: | Sun f77 5.0 alpha |
File System: | UFS |
System State: | Single User |
Notes:
BCOPY=-Qoption iropt -O4+bcopy; INV=-Qoption iropt -O4+invccexp; BMR=-Qoption iropt -O4+bmerge Baseline: -fast -xarch=v8plusa -fsimple=2 -xprefetch 101.tomcatv: -fast -xarch=v8plusa -xpad=local:23 -xprefetch 102.swim: -fast -xarch=v8plusa -xpad=common:15 -xprefetch -fsimple=2 103.su2cor: -fast -xarch=v8plusa -xvector -Qoption cg -Qms_pipe+nfll=5 103 cont: -fsimple=2 ${BCOPY} -lmvec 104.hydro2d: -fast -xarch=v8plusa -xprefetch -Qoption iropt -O4+pde 104 cont: -fsimple=2 -xprofile=use 107.mgrid: -fast -xarch=v8plusa -xprefetch -fsimple=2 ${BCOPY} 110.applu: -fast -xarch=v8plusa -Qoption iropt 110 cont: -O4+ddint+scalarrep,-ldstr -fsimple=2 125.turb3d: -fast -xarch=v8plusa -stackvar -xpad -fsimple=2 125 cont: ${INV} 141.apsi: -fast -xarch=v8plusa -fsimple=2 -stackvar -Qoption iropt 141 cont: -Si36 ${INV} -Qoption iropt -O4+algassoc 145.fpppp: -fast -xarch=v8plusa -xO5 -xsafe=mem -fsimple=2 145 cont: -Qoption iropt -O4+algassoc -xprofile=use 146.wave5: -fast -xarch=v8plusa -stackvar -fsimple=2 -Qoption iropt 146 cont: -O4+unroll ${BCOPY}
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Tue Feb 17 12:57:36 PST 1998First published at SPEC.org on 17-Feb-1998