SPECfp95

Hewlett-Packard

HP 9000 Model V2200

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
101.tomcatv	3700	122	30.2	124	29.9
102.swim	8600	166	51.9	166	51.8
103.su2cor	1400	102	13.7	102	13.8
104.hydro2d	2400	224	10.7	224	10.7
107.mgrid	2500	202	12.4	181	13.8
110.applu	2200	182	12.1	171	12.9
125.turb3d	4100	273	15.0	274	14.9
141.apsi	2100	106	19.9	105	19.9
145.fpppp	9600	261	36.8	259	37.0
146.wave5	3000	94.6	31.7	91	32.9
SPECfp_base95			20.3
		SPECfp95			20.8

Tester Information:

SPEC License #:	3
Tested By:	HP Convex, Tx
Test Date:	Aug-97
Hardware Avail:	Jan-98
Software Avail:	Jan-98

Hardware Information:

Model Name:	HP 9000 Model V2200
CPU:	200 MHz PA-RISC 8200
FPU:	Integrated
Number of CPU(s):	16
Primary Cache:	2MBI+2MBD off-chip
Secondary Cache:	None
Other Cache:	None
Memory:	4GB
Disk Subsystem:	SCSI 9.0 GB
Other Hardware:	None

Software Information:

Operating System:	HP-UX 11.0
Compiler:	HP-UX f77 B6055AA Exemplar V1.2.1APE
File System:	HP-UX
System State:	Multi-user

Notes:

Base Flags:
All:  +Oall +Odataprefetch
Linker Flag:  All: -Wl,-aarchive

Peak Flags:
101: +O3 +Odataprefetch +Oloop_unroll +Onolimit +Oregionsched +Ovectorize
102: +O4 +Ocachepadcommon +Odataprefetch +Oloop_unroll +Onolimit
103: +O2 +Odataprefetch +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit
104: +Oall +Odataprefetch +Oloop_unroll +Owhole_program_mode
107: +O3 +Odataprefetch +Oinline_budget=1000000 +Oloop_unroll +Onofltacc +Onolimit
110: +O3 +Odataprefetch +Oloop_unroll +Onofltacc +Onolimit
125: +O3 +Ocachepadcommon +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll
141: +Oall +Odataprefetch
145: +O4 +Oinline_budget=1000000 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +Ovectorize +I +P
146: +O3 +Odataprefetch +Olibcalls +Oloop_unroll +Onofltacc +Onolimit
Linker Flag:  All: -Wl,-aarchive 

The +I/+P indicates the use of profile based optimization.

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 30-Sep-1997