MPI2007 license: | 0018 | Test date: | Jul-2009 |
---|---|---|---|
Test sponsor: | QLogic Corporation | Hardware Availability: | Sep-2009 |
Tested by: | QLogic Corporation | Software Availability: | Sep-2009 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ranks | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Ranks | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
104.milc | 128 | 54.1 | 28.9 | 54.3 | 28.8 | 53.9 | 29.1 | |||||||
107.leslie3d | 128 | 202 | 25.8 | 202 | 25.8 | 202 | 25.9 | |||||||
113.GemsFDTD | 128 | 187 | 33.8 | 189 | 33.4 | 192 | 32.9 | |||||||
115.fds4 | 128 | 88.7 | 22.0 | 88.6 | 22.0 | 88.7 | 22.0 | |||||||
121.pop2 | 128 | 205 | 20.1 | 204 | 20.3 | 204 | 20.2 | |||||||
122.tachyon | 128 | 174 | 16.0 | 175 | 16.0 | 175 | 16.0 | |||||||
126.lammps | 128 | 149 | 19.6 | 148 | 19.6 | 148 | 19.6 | |||||||
127.wrf2 | 128 | 178 | 43.9 | 177 | 44.1 | 177 | 44.1 | |||||||
128.GAPgeofem | 128 | 75.6 | 27.3 | 75.4 | 27.4 | 75.5 | 27.4 | |||||||
129.tera_tf | 128 | 157 | 17.6 | 157 | 17.6 | 158 | 17.6 | |||||||
130.socorro | 128 | 122 | 31.2 | 122 | 31.4 | 122 | 31.3 | |||||||
132.zeusmp2 | 128 | 116 | 26.8 | 116 | 26.8 | 116 | 26.7 | |||||||
137.lu | 128 | 114 | 32.4 | 113 | 32.5 | 113 | 32.6 |
Hardware Summary | |
---|---|
Type of System: | Homogeneous |
Compute Node: | Nehalem Compute Node |
Interconnect: | TrueScale InfiniBand |
File Server Node: | FusionSA |
Total Compute Nodes: | 16 |
Total Chips: | 32 |
Total Cores: | 128 |
Total Threads: | 128 |
Total Memory: | 384 GB |
Base Ranks Run: | 128 |
Minimum Peak Ranks: | -- |
Maximum Peak Ranks: | -- |
Software Summary | |
---|---|
C Compiler: | Intel C++ Compiler 11.1 for Linux, Build 20090511 |
C++ Compiler: | Intel C++ Compiler 11.1 for Linux, Build 20090511 |
Fortran Compiler: | Intel Fortran Compiler 11.1 for Linux, Build 20090511 |
Base Pointers: | 64-bit |
Peak Pointers: | 64-bit |
MPI Library: | QLogic MPI 2.5 |
Other MPI Info: | None |
Pre-processors: | No |
Other Software: | None |
Hardware | |
---|---|
Number of nodes: | 16 |
Uses of the node: | compute |
Vendor: | Supermicro |
Model: | X8DTi-P motherboard, CSE-815TQ-700CB chassis |
CPU Name: | Intel Xeon X5570 |
CPU(s) orderable: | 1-2 chips |
Chips enabled: | 2 |
Cores enabled: | 8 |
Cores per chip: | 4 |
Threads per core: | 1 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.33 GHz, 6.4 GT/s QPI, Hyper-Threading disabled |
CPU MHz: | 2930 |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 8 MB I+D on chip per chip, 8 MB shared / 4 cores |
Other Cache: | None |
Memory: | 24 GB (RDIMM 6x4-GB, DDR3-1333 MHz) |
Disk Subsystem: | Seagate 500 GB ST3500320NS |
Other Hardware: | None |
Adapter: | QLogic QLE7342 |
Number of Adapters: | 1 |
Slot Type: | PCIe x8 Gen2 |
Data Rate: | InfiniBand 4x QDR |
Ports Used: | 1 |
Interconnect Type: | InfiniBand |
Software | |
---|---|
Adapter: | QLogic QLE7342 |
Adapter Driver: | QLogic OFED 1.4.1 |
Adapter Firmware: | none |
Operating System: | Red Hat EL 5.3, kernel 2.6.18-128 |
Local File System: | Linux/ext2 |
Shared File System: | NFSv3 IPoIB |
System State: | Multi-User |
Other Software: | none |
Hardware | |
---|---|
Number of nodes: | 1 |
Uses of the node: | fileserver |
Vendor: | Western Scientific |
Model: | FusionSA (storage appliance) with Tyan Thunder n6650W (S2915) motherboard and LSI Logic MegaRAID SAS 8408E RAID controller |
CPU Name: | Opteron 2218 |
CPU(s) orderable: | 1-2 chips |
Chips enabled: | 2 |
Cores enabled: | 4 |
Cores per chip: | 2 |
Threads per core: | 1 |
CPU Characteristics: | -- |
CPU MHz: | 2600 |
Primary Cache: | 64 KB I + 64 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per chip |
L3 Cache: | None |
Other Cache: | None |
Memory: | 16 GB (8 x 2 GB PC2-5300 ECC) |
Disk Subsystem: | 8 x 73 GB SAS 3Gb/s 15K RPM |
Other Hardware: | None |
Adapter: | Mellanox MHGH28-XTC |
Number of Adapters: | 1 |
Slot Type: | PCIe x8 Gen1 |
Data Rate: | InfiniBand 4x DDR |
Ports Used: | 1 |
Interconnect Type: | InfiniBand |
Software | |
---|---|
Adapter: | Mellanox MHGH28-XTC |
Adapter Driver: | OFED 1.3 |
Adapter Firmware: | 2.3.0 |
Operating System: | Red Hat EL 4.5, 2.6.9-55.ELsmp |
Local File System: | None |
Shared File System: | NFSv3 IPoIB |
System State: | Multi-User |
Other Software: | None |
Hardware | |
---|---|
Vendor: | QLogic |
Model: | QLogic 12000 Series |
Switch Model: | QLogic 12800-40 |
Number of Switches: | 1 |
Number of Ports: | 72 |
Data Rate: | InfiniBand 4x QDR |
Firmware: | 5.0.3.0.3 |
Topology: | Single switch |
Primary Use: | MPI traffic, File System traffic |
The config file option 'submit' was used.
BIOS settings notes: Intel Hyper-Threading Technology (SMT): Disabled (default is Enabled) Intel Turbo Boost Technology (Turbo) : Enabled (default is Enabled) Switch notes: Enabled 4K IB MTUs and 2 Virtual Lanes with QLogic 12800-40 switch CLI parameter setting "ismChassisSetMtu 5 3"
mpicc -cc=icc |
126.lammps: | mpicxx -CC=icpc |
mpif90 -f90=ifort |
mpicc -cc=icc mpif90 -f90=ifort |
121.pop2: | -DSPEC_MPI_CASE_FLAG |
127.wrf2: | -DSPEC_MPI_LINUX -DSPEC_MPI_CASE_FLAG |