# Invocation command line: # /aocczn4/bin/harness/runcpu --configfile amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --nopower --runmode speed --tune base:peak --size test:train:refspeed intspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 400 SPEC CPU 2017 V1.1.9 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc400_znver4_A1.cfg # Creation Date : April 16, 2023 # CPU 2017 Version : 1.1.9 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 4.0.0 # Operating system version : RHEL 8.6 # Supported OS's : Ubuntu 22.04, RHEL 8.6/9, SLE 15 SP4 # Hardware : AMD znver4 (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc400_znver4_A1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD znver4-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD znver4 microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc400_znver4_A1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # znver4-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other znver4 configurations, please review # "Readme.amd_speed_aocc400_znver4_A1.txt". In general, znver4 CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc400_znver4_A1.cfg" or any # other file besides "ini_amd_speed_aocc400_znver4_A1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc400 %define binary_package_name amd_speed_%{compiler_name}_znver4_A %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path ${SPEC} %define flags_file_name %{compiler_name}-flags.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc400_znver4_A_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = oversize_threshold:0,retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:%{ENV_LD_LIBRARY_PATH} %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc400_znver4_A1.inc # File generation code date: October 11, 2022 # File generation date/time: November 16, 2023 / 02:56:33 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 448 %define physical_core_count 224 %define physical_core_max 223 %define logical_core_max 447 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from '9734' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 448 preENV_GOMP_CPU_AFFINITY = 0-447 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 224 ENV_GOMP_CPU_AFFINITY = 0-223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 224 ENV_GOMP_CPU_AFFINITY = 0-223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 15 bind0 = numactl --physcpubind=15 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 224 603.bwaves_s,619.lbm_s,621.wrf_s,628.pop2_s,649.fotonik3d_s=peak: threads = 224 ENV_GOMP_CPU_AFFINITY = 0-223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 448 607.cactuBSSN_s,627.cam4_s,638.imagick_s,644.nab_s,657.xz_s=peak: threads = 448 ENV_GOMP_CPU_AFFINITY = 0-447 bind0 = numactl --physcpubind=0-447 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 448 654.roms_s=peak: threads = 448 ENV_GOMP_CPU_AFFINITY = 0 224 1 225 2 226 3 227 4 228 5 229 6 230 7 231 8 232 9 233 10 234 11 235 12 236 13 237 14 238 15 239 16 240 17 241 18 242 19 243 20 244 21 245 22 246 23 247 24 248 25 249 26 250 27 251 28 252 29 253 30 254 31 255 32 256 33 257 34 258 35 259 36 260 37 261 38 262 39 263 40 264 41 265 42 266 43 267 44 268 45 269 46 270 47 271 48 272 49 273 50 274 51 275 52 276 53 277 54 278 55 279 56 280 57 281 58 282 59 283 60 284 61 285 62 286 63 287 64 288 65 289 66 290 67 291 68 292 69 293 70 294 71 295 72 296 73 297 74 298 75 299 76 300 77 301 78 302 79 303 80 304 81 305 82 306 83 307 84 308 85 309 86 310 87 311 88 312 89 313 90 314 91 315 92 316 93 317 94 318 95 319 96 320 97 321 98 322 99 323 100 324 101 325 102 326 103 327 104 328 105 329 106 330 107 331 108 332 109 333 110 334 111 335 112 336 113 337 114 338 115 339 116 340 117 341 118 342 119 343 120 344 121 345 122 346 123 347 124 348 125 349 126 350 127 351 128 352 129 353 130 354 131 355 132 356 133 357 134 358 135 359 136 360 137 361 138 362 139 363 140 364 141 365 142 366 143 367 144 368 145 369 146 370 147 371 148 372 149 373 150 374 151 375 152 376 153 377 154 378 155 379 156 380 157 381 158 382 159 383 160 384 161 385 162 386 163 387 164 388 165 389 166 390 167 391 168 392 169 393 170 394 171 395 172 396 173 397 174 398 175 399 176 400 177 401 178 402 179 403 180 404 181 405 182 406 183 407 184 408 185 409 186 410 187 411 188 412 189 413 190 414 191 415 192 416 193 417 194 418 195 419 196 420 197 421 198 422 199 423 200 424 201 425 202 426 203 427 204 428 205 429 206 430 207 431 208 432 209 433 210 434 211 435 212 436 213 437 214 438 215 439 216 440 217 441 218 442 219 443 220 444 221 445 222 446 223 447 bind0 = numactl --physcpubind=0-447 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9016 tester =ASUSTeK Computer Inc. test_sponsor =ASUSTeK Computer Inc. hw_vendor =ASUSTeK Computer Inc. hw_model000 =ASUS RS720A-E12-RS12 hw_model001 =(2.20 GHz, AMD EPYC 9734) #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 4.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Jun-2023 sw_avail =Nov-2022 hw_cpu_name =AMD EPYC 9734 hw_cpu_nominal_mhz =2200 hw_cpu_max_mhz =3000 hw_ncores =224 hw_nthreadspercore =2 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios =Version 1002 released May-2023 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =256 MB I+D on chip per chip, hw_tcache001 = 16 MB shared / 7 cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = OS set to performance mode via cpupower frequency-set -g performance notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_030 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_035 =To free node-local memory and avoid remote memory usage, notes_os_040 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_045 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_050 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_055 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_060 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =64-bit notes_os_thp_015 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 =To always enable THP for peak runs of: notes_os_thp_004 =603.bwaves_s, 607.cactuBSSN_s, 619.lbm_s, 627.cam4_s, 628.pop2_s, 638.imagick_s, 644.nab_s, 649.fotonik3d_s: notes_os_thp_005 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_006 =run as root. notes_os_thp_007 =To disable THP for peak runs of 621.wrf_s: notes_os_thp_008 ='echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_009 =run as root. notes_os_thp_010 =To enable THP only on request for peak runs of 654.roms_s: notes_os_thp_011 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_012 =run as root. ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =1 x 4.0 TB PCIe NVMe SSD hw_memory =1536 GB (24 x 64 GB 2Rx4 PC5-4800B-R) hw_nchips =2 prepared_by =ASUSTeK Computer Inc. sw_file =xfs sw_os000 =SUSE Linux Enterprise Server 15 SP4 (x86_64) sw_os001 =Kernel 5.14.21-150400.22-default sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/aocczn4/config/amd_speed_aocc400_znver4_A1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/ASUSTekPlatform-Settings-AMD-K14-V1.6.xml flagsurl001 = http://www.spec.org/cpu2017/flags/aocc400-flags-asusv01.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 4.0.0 SPEC CPU2017 V1.1.8 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver4 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = echo "$command" > run.sh ; $BIND bash run.sh ############################################################################### # AOCC 4.0.0 workarounds that do not count as PORTABILITY ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## intrate=base: # The following is necessary for 602 gcc: EXTRA_LDFLAGS = -z muldefs ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## 602.gcc_s=peak: #lang='C' EXTRA_LDFLAGS = -z muldefs ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -finline-aggressive \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=9 \ -mllvm -unroll-threshold=50 \ -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT_BASE) \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm 627.cam4_s=peak: #lang='F,C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' ENV_PGHPF_ZMEM = yes submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 657.xz_s=peak: #lang='C' ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 8 # ---- End inclusion of '/aocczn4/config/amd_speed_aocc400_znver4_A1_flags.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /aocczn4/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on localhost Thu Nov 16 02:56:45 2023 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 249 (249.11+suse.124.g2bc0b2c447) notes_plat_sysinfo_105 = 12. Services, from systemctl list-unit-files notes_plat_sysinfo_110 = 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_115 = 14. cpupower frequency-info notes_plat_sysinfo_120 = 15. tuned-adm active notes_plat_sysinfo_125 = 16. sysctl notes_plat_sysinfo_130 = 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_135 = 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_140 = 19. OS release notes_plat_sysinfo_145 = 20. Disk information notes_plat_sysinfo_150 = 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_155 = 22. dmidecode notes_plat_sysinfo_160 = 23. BIOS notes_plat_sysinfo_165 = ------------------------------------------------------------ notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = ------------------------------------------------------------ notes_plat_sysinfo_180 = 1. uname -a notes_plat_sysinfo_185 = Linux localhost 5.14.21-150400.22-default #1 SMP PREEMPT_DYNAMIC Wed May 11 06:57:18 UTC 2022 (49db222) notes_plat_sysinfo_190 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = ------------------------------------------------------------ notes_plat_sysinfo_205 = 2. w notes_plat_sysinfo_210 = 02:56:45 up 1 day, 18:00, 2 users, load average: 3.04, 6.49, 4.19 notes_plat_sysinfo_215 = USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_220 = root tty1 - Tue09 12:36m 1.43s 0.14s /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_225 = root tty2 - Tue13 12:37m 0.08s 0.08s -bash notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = ------------------------------------------------------------ notes_plat_sysinfo_240 = 3. Username notes_plat_sysinfo_245 = From environment variable $USER: root notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = ------------------------------------------------------------ notes_plat_sysinfo_260 = 4. ulimit -a notes_plat_sysinfo_265 = core file size (blocks, -c) unlimited notes_plat_sysinfo_270 = data seg size (kbytes, -d) unlimited notes_plat_sysinfo_275 = scheduling priority (-e) 0 notes_plat_sysinfo_280 = file size (blocks, -f) unlimited notes_plat_sysinfo_285 = pending signals (-i) 6190564 notes_plat_sysinfo_290 = max locked memory (kbytes, -l) 2097152 notes_plat_sysinfo_295 = max memory size (kbytes, -m) unlimited notes_plat_sysinfo_300 = open files (-n) 1024 notes_plat_sysinfo_305 = pipe size (512 bytes, -p) 8 notes_plat_sysinfo_310 = POSIX message queues (bytes, -q) 819200 notes_plat_sysinfo_315 = real-time priority (-r) 0 notes_plat_sysinfo_320 = stack size (kbytes, -s) unlimited notes_plat_sysinfo_325 = cpu time (seconds, -t) unlimited notes_plat_sysinfo_330 = max user processes (-u) 6190564 notes_plat_sysinfo_335 = virtual memory (kbytes, -v) unlimited notes_plat_sysinfo_340 = file locks (-x) unlimited notes_plat_sysinfo_345 = notes_plat_sysinfo_350 = ------------------------------------------------------------ notes_plat_sysinfo_355 = 5. sysinfo process ancestry notes_plat_sysinfo_360 = /usr/lib/systemd/systemd --switched-root --system --deserialize 30 notes_plat_sysinfo_365 = login -- root notes_plat_sysinfo_370 = -bash notes_plat_sysinfo_375 = /bin/bash ./speed.sh notes_plat_sysinfo_380 = python3 ./run_amd_speed_aocc400_znver4_A1.py notes_plat_sysinfo_385 = /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_390 = runcpu --config amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 intspeed notes_plat_sysinfo_395 = runcpu --configfile amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --nopower notes_plat_sysinfo_400 = --runmode speed --tune base:peak --size test:train:refspeed intspeed --nopreenv --note-preenv --logfile notes_plat_sysinfo_405 = $SPEC/tmp/CPU2017.296/templogs/preenv.intspeed.296.0.log --lognum 296.0 --from_runcpu 2 notes_plat_sysinfo_410 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_415 = $SPEC = /aocczn4 notes_plat_sysinfo_420 = notes_plat_sysinfo_425 = ------------------------------------------------------------ notes_plat_sysinfo_430 = 6. /proc/cpuinfo notes_plat_sysinfo_435 = model name : AMD EPYC 9734 112-Core Processor notes_plat_sysinfo_440 = vendor_id : AuthenticAMD notes_plat_sysinfo_445 = cpu family : 25 notes_plat_sysinfo_450 = model : 160 notes_plat_sysinfo_455 = stepping : 2 notes_plat_sysinfo_460 = microcode : 0xaa0020e notes_plat_sysinfo_465 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass notes_plat_sysinfo_470 = TLB size : 3584 4K pages notes_plat_sysinfo_475 = cpu cores : 112 notes_plat_sysinfo_480 = siblings : 224 notes_plat_sysinfo_485 = 2 physical ids (chips) notes_plat_sysinfo_490 = 448 processors (hardware threads) notes_plat_sysinfo_495 = physical id 0: core ids notes_plat_sysinfo_500 = 0-6,8-14,16-22,24-30,32-38,40-46,48-54,56-62,64-70,72-78,80-86,88-94,96-102,104-110,112-118,120-126 notes_plat_sysinfo_505 = physical id 1: core ids notes_plat_sysinfo_510 = 0-6,8-14,16-22,24-30,32-38,40-46,48-54,56-62,64-70,72-78,80-86,88-94,96-102,104-110,112-118,120-126 notes_plat_sysinfo_515 = physical id 0: apicids notes_plat_sysinfo_520 = 0-13,16-29,32-45,48-61,64-77,80-93,96-109,112-125,128-141,144-157,160-173,176-189,192-205,208-221,224-237 notes_plat_sysinfo_525 = ,240-253 notes_plat_sysinfo_530 = physical id 1: apicids notes_plat_sysinfo_535 = 256-269,272-285,288-301,304-317,320-333,336-349,352-365,368-381,384-397,400-413,416-429,432-445,448-461,4 notes_plat_sysinfo_540 = 64-477,480-493,496-509 notes_plat_sysinfo_545 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_550 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_555 = notes_plat_sysinfo_560 = ------------------------------------------------------------ notes_plat_sysinfo_565 = 7. lscpu notes_plat_sysinfo_570 = notes_plat_sysinfo_575 = From lscpu from util-linux 2.37.2: notes_plat_sysinfo_580 = Architecture: x86_64 notes_plat_sysinfo_585 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_590 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_595 = Byte Order: Little Endian notes_plat_sysinfo_600 = CPU(s): 448 notes_plat_sysinfo_605 = On-line CPU(s) list: 0-447 notes_plat_sysinfo_610 = Vendor ID: AuthenticAMD notes_plat_sysinfo_615 = Model name: AMD EPYC 9734 112-Core Processor notes_plat_sysinfo_620 = CPU family: 25 notes_plat_sysinfo_625 = Model: 160 notes_plat_sysinfo_630 = Thread(s) per core: 2 notes_plat_sysinfo_635 = Core(s) per socket: 112 notes_plat_sysinfo_640 = Socket(s): 2 notes_plat_sysinfo_645 = Stepping: 2 notes_plat_sysinfo_650 = Frequency boost: enabled notes_plat_sysinfo_655 = CPU max MHz: 2999.2180 notes_plat_sysinfo_660 = CPU min MHz: 1500.0000 notes_plat_sysinfo_665 = BogoMIPS: 4399.99 notes_plat_sysinfo_670 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 notes_plat_sysinfo_675 = clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_680 = constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl notes_plat_sysinfo_685 = pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe notes_plat_sysinfo_690 = popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy notes_plat_sysinfo_695 = abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext notes_plat_sysinfo_700 = perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 notes_plat_sysinfo_705 = invpcid_single hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 notes_plat_sysinfo_710 = avx2 smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap notes_plat_sysinfo_715 = avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt notes_plat_sysinfo_720 = xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_725 = avx512_bf16 clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin arat npt lbrv notes_plat_sysinfo_730 = svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists notes_plat_sysinfo_735 = pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl avx512vbmi notes_plat_sysinfo_740 = umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg notes_plat_sysinfo_745 = avx512_vpopcntdq la57 rdpid overflow_recov succor smca fsrm flush_l1d notes_plat_sysinfo_750 = Virtualization: AMD-V notes_plat_sysinfo_755 = L1d cache: 7 MiB (224 instances) notes_plat_sysinfo_760 = L1i cache: 7 MiB (224 instances) notes_plat_sysinfo_765 = L2 cache: 224 MiB (224 instances) notes_plat_sysinfo_770 = L3 cache: 512 MiB (32 instances) notes_plat_sysinfo_775 = NUMA node(s): 8 notes_plat_sysinfo_780 = NUMA node0 CPU(s): 0-27,224-251 notes_plat_sysinfo_785 = NUMA node1 CPU(s): 28-55,252-279 notes_plat_sysinfo_790 = NUMA node2 CPU(s): 56-83,280-307 notes_plat_sysinfo_795 = NUMA node3 CPU(s): 84-111,308-335 notes_plat_sysinfo_800 = NUMA node4 CPU(s): 112-139,336-363 notes_plat_sysinfo_805 = NUMA node5 CPU(s): 140-167,364-391 notes_plat_sysinfo_810 = NUMA node6 CPU(s): 168-195,392-419 notes_plat_sysinfo_815 = NUMA node7 CPU(s): 196-223,420-447 notes_plat_sysinfo_820 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_825 = Vulnerability L1tf: Not affected notes_plat_sysinfo_830 = Vulnerability Mds: Not affected notes_plat_sysinfo_835 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_840 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp notes_plat_sysinfo_845 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_850 = Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIBP always-on, RSB notes_plat_sysinfo_855 = filling notes_plat_sysinfo_860 = Vulnerability Srbds: Not affected notes_plat_sysinfo_865 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_870 = notes_plat_sysinfo_875 = From lscpu --cache: notes_plat_sysinfo_880 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_885 = L1d 32K 7M 8 Data 1 64 1 64 notes_plat_sysinfo_890 = L1i 32K 7M 8 Instruction 1 64 1 64 notes_plat_sysinfo_895 = L2 1M 224M 8 Unified 2 2048 1 64 notes_plat_sysinfo_900 = L3 16M 512M 16 Unified 3 16384 1 64 notes_plat_sysinfo_905 = notes_plat_sysinfo_910 = ------------------------------------------------------------ notes_plat_sysinfo_915 = 8. numactl --hardware notes_plat_sysinfo_920 = NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_925 = available: 8 nodes (0-7) notes_plat_sysinfo_930 = node 0 cpus: 0-27,224-251 notes_plat_sysinfo_935 = node 0 size: 193268 MB notes_plat_sysinfo_940 = node 0 free: 192017 MB notes_plat_sysinfo_945 = node 1 cpus: 28-55,252-279 notes_plat_sysinfo_950 = node 1 size: 193519 MB notes_plat_sysinfo_955 = node 1 free: 193093 MB notes_plat_sysinfo_960 = node 2 cpus: 56-83,280-307 notes_plat_sysinfo_965 = node 2 size: 193519 MB notes_plat_sysinfo_970 = node 2 free: 193112 MB notes_plat_sysinfo_975 = node 3 cpus: 84-111,308-335 notes_plat_sysinfo_980 = node 3 size: 193519 MB notes_plat_sysinfo_985 = node 3 free: 192660 MB notes_plat_sysinfo_990 = node 4 cpus: 112-139,336-363 notes_plat_sysinfo_995 = node 4 size: 193519 MB notes_plat_sysinfo_1000= node 4 free: 193199 MB notes_plat_sysinfo_1005= node 5 cpus: 140-167,364-391 notes_plat_sysinfo_1010= node 5 size: 193485 MB notes_plat_sysinfo_1015= node 5 free: 192839 MB notes_plat_sysinfo_1020= node 6 cpus: 168-195,392-419 notes_plat_sysinfo_1025= node 6 size: 193519 MB notes_plat_sysinfo_1030= node 6 free: 193157 MB notes_plat_sysinfo_1035= node 7 cpus: 196-223,420-447 notes_plat_sysinfo_1040= node 7 size: 193311 MB notes_plat_sysinfo_1045= node 7 free: 192932 MB notes_plat_sysinfo_1050= node distances: notes_plat_sysinfo_1055= node 0 1 2 3 4 5 6 7 notes_plat_sysinfo_1060= 0: 10 12 12 12 32 32 32 32 notes_plat_sysinfo_1065= 1: 12 10 12 12 32 32 32 32 notes_plat_sysinfo_1070= 2: 12 12 10 12 32 32 32 32 notes_plat_sysinfo_1075= 3: 12 12 12 10 32 32 32 32 notes_plat_sysinfo_1080= 4: 32 32 32 32 10 12 12 12 notes_plat_sysinfo_1085= 5: 32 32 32 32 12 10 12 12 notes_plat_sysinfo_1090= 6: 32 32 32 32 12 12 10 12 notes_plat_sysinfo_1095= 7: 32 32 32 32 12 12 12 10 notes_plat_sysinfo_1100= notes_plat_sysinfo_1105= ------------------------------------------------------------ notes_plat_sysinfo_1110= 9. /proc/meminfo notes_plat_sysinfo_1115= MemTotal: 1584809180 kB notes_plat_sysinfo_1120= notes_plat_sysinfo_1125= ------------------------------------------------------------ notes_plat_sysinfo_1130= 10. who -r notes_plat_sysinfo_1135= run-level 3 Nov 14 08:58 notes_plat_sysinfo_1140= notes_plat_sysinfo_1145= ------------------------------------------------------------ notes_plat_sysinfo_1150= 11. Systemd service manager version: systemd 249 (249.11+suse.124.g2bc0b2c447) notes_plat_sysinfo_1155= Default Target Status notes_plat_sysinfo_1160= multi-user running notes_plat_sysinfo_1165= notes_plat_sysinfo_1170= ------------------------------------------------------------ notes_plat_sysinfo_1175= 12. Services, from systemctl list-unit-files notes_plat_sysinfo_1180= STATE UNIT FILES notes_plat_sysinfo_1185= enabled YaST2-Firstboot YaST2-Second-Stage apparmor auditd cron display-manager getty@ haveged notes_plat_sysinfo_1190= irqbalance issue-generator kbdsettings klog lvm2-monitor nscd nvmefc-boot-connections notes_plat_sysinfo_1195= postfix purge-kernels rollback rsyslog smartd sshd wicked wickedd-auto4 wickedd-dhcp4 notes_plat_sysinfo_1200= wickedd-dhcp6 wickedd-nanny notes_plat_sysinfo_1205= enabled-runtime systemd-remount-fs notes_plat_sysinfo_1210= disabled autofs autoyast-initscripts blk-availability boot-sysctl ca-certificates chrony-wait notes_plat_sysinfo_1215= chronyd console-getty cups cups-browsed debug-shell ebtables exchange-bmc-os-info notes_plat_sysinfo_1220= firewalld gpm grub2-once haveged-switch-root hwloc-dump-hwdata ipmi ipmievd notes_plat_sysinfo_1225= issue-add-ssh-keys kexec-load lunmask man-db-create multipathd nfs nfs-blkmap notes_plat_sysinfo_1230= nvmf-autoconnect rdisc rpcbind rpmconfigcheck rsyncd serial-getty@ smartd_generate_opts notes_plat_sysinfo_1235= snmpd snmptrapd svnserve systemd-boot-check-no-failures systemd-network-generator notes_plat_sysinfo_1240= systemd-sysext systemd-time-wait-sync systemd-timesyncd tuned udisks2 notes_plat_sysinfo_1245= indirect wickedd notes_plat_sysinfo_1250= notes_plat_sysinfo_1255= ------------------------------------------------------------ notes_plat_sysinfo_1260= 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_1265= BOOT_IMAGE=/boot/vmlinuz-5.14.21-150400.22-default notes_plat_sysinfo_1270= root=UUID=bd4eeb48-8f2c-47c9-ae06-b7241b1d0eb7 notes_plat_sysinfo_1275= splash=silent notes_plat_sysinfo_1280= mitigations=auto notes_plat_sysinfo_1285= quiet notes_plat_sysinfo_1290= security=apparmor notes_plat_sysinfo_1295= notes_plat_sysinfo_1300= ------------------------------------------------------------ notes_plat_sysinfo_1305= 14. cpupower frequency-info notes_plat_sysinfo_1310= analyzing CPU 0: notes_plat_sysinfo_1315= current policy: frequency should be within 1.50 GHz and 2.20 GHz. notes_plat_sysinfo_1320= The governor "performance" may decide which speed to use notes_plat_sysinfo_1325= within this range. notes_plat_sysinfo_1330= boost state support: notes_plat_sysinfo_1335= Supported: yes notes_plat_sysinfo_1340= Active: yes notes_plat_sysinfo_1345= notes_plat_sysinfo_1350= ------------------------------------------------------------ notes_plat_sysinfo_1355= 15. tuned-adm active notes_plat_sysinfo_1360= It seems that tuned daemon is not running, preset profile is not activated. notes_plat_sysinfo_1365= Preset profile: throughput-performance notes_plat_sysinfo_1370= notes_plat_sysinfo_1375= ------------------------------------------------------------ notes_plat_sysinfo_1380= 16. sysctl notes_plat_sysinfo_1385= kernel.numa_balancing 1 notes_plat_sysinfo_1390= kernel.randomize_va_space 0 notes_plat_sysinfo_1395= vm.compaction_proactiveness 20 notes_plat_sysinfo_1400= vm.dirty_background_bytes 0 notes_plat_sysinfo_1405= vm.dirty_background_ratio 10 notes_plat_sysinfo_1410= vm.dirty_bytes 0 notes_plat_sysinfo_1415= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_1420= vm.dirty_ratio 8 notes_plat_sysinfo_1425= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_1430= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_1435= vm.extfrag_threshold 500 notes_plat_sysinfo_1440= vm.min_unmapped_ratio 1 notes_plat_sysinfo_1445= vm.nr_hugepages 0 notes_plat_sysinfo_1450= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_1455= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_1460= vm.swappiness 1 notes_plat_sysinfo_1465= vm.watermark_boost_factor 15000 notes_plat_sysinfo_1470= vm.watermark_scale_factor 10 notes_plat_sysinfo_1475= vm.zone_reclaim_mode 1 notes_plat_sysinfo_1480= notes_plat_sysinfo_1485= ------------------------------------------------------------ notes_plat_sysinfo_1490= 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_1495= defrag [always] defer defer+madvise madvise never notes_plat_sysinfo_1500= enabled [always] madvise never notes_plat_sysinfo_1505= hpage_pmd_size 2097152 notes_plat_sysinfo_1510= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_1515= notes_plat_sysinfo_1520= ------------------------------------------------------------ notes_plat_sysinfo_1525= 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_1530= alloc_sleep_millisecs 60000 notes_plat_sysinfo_1535= defrag 1 notes_plat_sysinfo_1540= max_ptes_none 511 notes_plat_sysinfo_1545= max_ptes_shared 256 notes_plat_sysinfo_1550= max_ptes_swap 64 notes_plat_sysinfo_1555= pages_to_scan 4096 notes_plat_sysinfo_1560= scan_sleep_millisecs 10000 notes_plat_sysinfo_1565= notes_plat_sysinfo_1570= ------------------------------------------------------------ notes_plat_sysinfo_1575= 19. OS release notes_plat_sysinfo_1580= From /etc/*-release /etc/*-version notes_plat_sysinfo_1585= os-release SUSE Linux Enterprise Server 15 SP4 notes_plat_sysinfo_1590= notes_plat_sysinfo_1595= ------------------------------------------------------------ notes_plat_sysinfo_1600= 20. Disk information notes_plat_sysinfo_1605= SPEC is set to: /aocczn4 notes_plat_sysinfo_1610= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1615= /dev/nvme0n1p4 xfs 2.0T 201G 1.9T 10% / notes_plat_sysinfo_1620= notes_plat_sysinfo_1625= ------------------------------------------------------------ notes_plat_sysinfo_1630= 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_1635= Vendor: ASUSTeK COMPUTER INC. notes_plat_sysinfo_1640= Product: RS720A-E12-RS12 notes_plat_sysinfo_1645= Product Family: Server notes_plat_sysinfo_1650= Serial: 123456789012 notes_plat_sysinfo_1655= notes_plat_sysinfo_1660= ------------------------------------------------------------ notes_plat_sysinfo_1665= 22. dmidecode notes_plat_sysinfo_1670= Additional information from dmidecode 3.2 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_1675= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_1680= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_1685= "DMTF SMBIOS" standard. notes_plat_sysinfo_1690= Memory: notes_plat_sysinfo_1695= 24x Samsung M321R8GA0BB0-CQKDG 64 GB 2 rank 4800 notes_plat_sysinfo_1700= notes_plat_sysinfo_1705= notes_plat_sysinfo_1710= ------------------------------------------------------------ notes_plat_sysinfo_1715= 23. BIOS notes_plat_sysinfo_1720= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_1725= BIOS Vendor: American Megatrends Inc. notes_plat_sysinfo_1730= BIOS Version: 1002 notes_plat_sysinfo_1735= BIOS Date: 05/24/2023 notes_plat_sysinfo_1740= BIOS Revision: 10.2 hw_cpu_name = AMD EPYC 9734 hw_disk = 2.0 TB add more disk info here hw_memory001 = 1511.392 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 2 hw_ncores = 224 hw_nthreadspercore = 2 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os001 = SUSE Linux Enterprise Server 15 SP4 sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program 657.xz_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 648.exchange2_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 641.leela_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 631.deepsjeng_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 620.omnetpp_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 600.perlbench_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: power_management000 = BIOS and OS set to prefer performance power_management001 = at the cost of additional power usage. notes_plat_000 =BIOS Configuration: notes_plat_005 =SR-IOV Support = Disabled notes_plat_010 =SVM Mode = Disabled notes_plat_015 =NUMA nodes per socket = NPS4 notes_plat_020 =Determinism Control = Manual notes_plat_025 =Determinism Enable = Power notes_plat_030 =Engine Boost = Aggressive notes_plat_035 =TDP Control = Manual notes_plat_040 =TDP = 400 notes_plat_045 =PPT Control = Manual notes_plat_050 =PPT = 400 notes_plat_055 =BMC Configuration: notes_plat_060 =Fan mode = Full speed mode