SPEC CPU(R)2017 Floating Point Speed Result Hewlett Packard Enterprise ProLiant DL325 Gen10 Plus v2 (2.00 GHz, AMD EPYC 7663P) Test Sponsor: HPE CPU2017 License: 3 Test date: Dec-2023 Test sponsor: HPE Hardware availability: Nov-2023 Tested by: HPE Software availability: May-2022 Base Base Base Peak Peak Peak Benchmarks Threads Run Time Ratio Threads Run Time Ratio --------------- ------- --------- --------- ------- --------- --------- 603.bwaves_s 56 160 369 * 56 160 369 * 603.bwaves_s 56 160 369 S 56 160 369 S 603.bwaves_s 56 160 368 S 56 160 369 S 607.cactuBSSN_s 56 62.8 265 S 56 62.7 266 * 607.cactuBSSN_s 56 63.1 264 S 56 63.1 264 S 607.cactuBSSN_s 56 63.0 265 * 56 62.7 266 S 619.lbm_s 56 72.4 72.4 S 56 72.4 72.4 S 619.lbm_s 56 72.3 72.5 * 56 72.3 72.5 * 619.lbm_s 56 72.1 72.7 S 56 72.1 72.7 S 621.wrf_s 56 79.0 168 S 56 78.3 169 * 621.wrf_s 56 79.6 166 S 56 78.2 169 S 621.wrf_s 56 79.6 166 * 56 78.5 168 S 627.cam4_s 56 80.0 111 S 56 80.0 111 S 627.cam4_s 56 79.8 111 S 56 79.8 111 S 627.cam4_s 56 79.9 111 * 56 79.9 111 * 628.pop2_s 56 160 74.3 * 56 160 74.3 * 628.pop2_s 56 160 74.0 S 56 160 74.0 S 628.pop2_s 56 160 74.4 S 56 160 74.4 S 638.imagick_s 56 56.6 255 S 56 56.6 255 S 638.imagick_s 56 56.3 256 * 56 56.3 256 * 638.imagick_s 56 56.3 256 S 56 56.3 256 S 644.nab_s 56 50.1 349 S 56 50.1 349 S 644.nab_s 56 49.8 351 * 56 49.8 351 * 644.nab_s 56 49.8 351 S 56 49.8 351 S 649.fotonik3d_s 56 126 72.3 * 56 126 72.3 * 649.fotonik3d_s 56 126 72.4 S 56 126 72.4 S 649.fotonik3d_s 56 126 72.3 S 56 126 72.3 S 654.roms_s 56 95.9 164 S 56 91.8 172 * 654.roms_s 56 96.0 164 * 56 92.0 171 S 654.roms_s 56 96.4 163 S 56 91.7 172 S ================================================================================= 603.bwaves_s 56 160 369 * 56 160 369 * 607.cactuBSSN_s 56 63.0 265 * 56 62.7 266 * 619.lbm_s 56 72.3 72.5 * 56 72.3 72.5 * 621.wrf_s 56 79.6 166 * 56 78.3 169 * 627.cam4_s 56 79.9 111 * 56 79.9 111 * 628.pop2_s 56 160 74.3 * 56 160 74.3 * 638.imagick_s 56 56.3 256 * 56 56.3 256 * 644.nab_s 56 49.8 351 * 56 49.8 351 * 649.fotonik3d_s 56 126 72.3 * 56 126 72.3 * 654.roms_s 56 96.0 164 * 56 91.8 172 * SPECspeed(R)2017_fp_base 159 SPECspeed(R)2017_fp_peak 160 HARDWARE -------- CPU Name: AMD EPYC 7663P Max MHz: 3500 Nominal: 2000 Enabled: 56 cores, 1 chip Orderable: 1 chip Cache L1: 32 KB I + 32 KB D on chip per core L2: 512 KB I+D on chip per core L3: 256 MB I+D on chip per chip, 32 MB shared / 7 cores Other: None Memory: 512 GB (8 x 64 GB 2Rx4 PC4-3200AA-R) Storage: 1 x 480 GB SAS SSD Other: None SOFTWARE -------- OS: Red Hat Enterprise Linux 9.0 (Plow) Kernel 5.14.0-70.13.1.el9_0.x86_64 Compiler: C/C++/Fortran: Version 3.2.0 of AOCC Parallel: Yes Firmware: HPE BIOS Version A43 v2.90 (10/27/2023) released Oct-2023 File System: xfs System State: Run level 3 (multi-user) Base Pointers: 64-bit Peak Pointers: 64-bit Other: jemalloc: jemalloc memory allocator library v5.1.0 Power Management: BIOS set to prefer performance at the cost of additional power usage Compiler Notes -------------- The AMD64 AOCC Compiler Suite is available at http://developer.amd.com/amd-aocc/ Submit Notes ------------ The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details. Operating System Notes ---------------------- 'ulimit -s unlimited' was used to set environment stack size limit 'ulimit -l 2097152' was used to set environment locked pages in memory limit runcpu command invoked through numactl i.e.: numactl --interleave=all runcpu To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. To free node-local memory and avoid remote memory usage, 'sysctl -w vm.zone_reclaim_mode=1' run as root. To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. To disable address space layout randomization (ASLR) to reduce run-to-run variability, 'sysctl -w kernel.randomize_va_space=0' run as root. To enable Transparent Hugepages (THP) for all allocations, 'echo always > /sys/kernel/mm/transparent_hugepage/enabled' and 'echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. To enable THP only on request for peak runs of 628.pop2_s: 'echo madvise > /sys/kernel/mm/transparent_hugepage/enabled' run as root. To disable THP for peak runs of 627.cam4_s, 649.fotonik3d_s, and 654.roms_s, 'echo never > /sys/kernel/mm/transparent_hugepage/enabled' run as root. Environment Variables Notes --------------------------- Environment variables set by runcpu before the start of the run: GOMP_CPU_AFFINITY = "0-55" LD_LIBRARY_PATH = "/home/cpu2017/amd_speed_aocc320_milanx_A_lib/lib;/home/cpu2017/amd_speed_aocc320_milanx_A_lib/lib32:" LIBOMP_NUM_HIDDEN_HELPER_THREADS = "0" MALLOC_CONF = "retain:true" OMP_DYNAMIC = "false" OMP_SCHEDULE = "static" OMP_STACKSIZE = "128M" OMP_THREAD_LIMIT = "56" Environment variables set by runcpu during the 603.bwaves_s peak run: GOMP_CPU_AFFINITY = "0-55" Environment variables set by runcpu during the 607.cactuBSSN_s peak run: GOMP_CPU_AFFINITY = "0-55" Environment variables set by runcpu during the 621.wrf_s peak run: GOMP_CPU_AFFINITY = "0-55" Environment variables set by runcpu during the 654.roms_s peak run: GOMP_CPU_AFFINITY = "0-55" General Notes ------------- Binaries were compiled on a system with 2x AMD EPYC 7742 CPU + 1TiB Memory using openSUSE 15.2 NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) jemalloc 5.1.0 is available here: https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 Platform Notes -------------- BIOS Configuration Workload Profile set to General Peak Frequency Compute AMD SMT Option set to Disabled Determinism Control set to Manual Performance Determinism set to Power Deterministic Memory Patrol Scrubbing set to disabled NUMA memory domains per socket set to one memory domains per socket Thermal Configuration set to Maximum Cooling Workload Profile set to Custom Power Regulator set to OS Control Mode Minimum Processor Idle Power Core C-State set to NO C-States L1 HW Prefetcher set to Disabled Sysinfo program /home/cpu2017/bin/sysinfo Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 running on localhost.localdomain Fri Dec 1 15:11:54 2023 SUT (System Under Test) info as seen by some common utilities. ------------------------------------------------------------ Table of contents ------------------------------------------------------------ 1. uname -a 2. w 3. Username 4. ulimit -a 5. sysinfo process ancestry 6. /proc/cpuinfo 7. lscpu 8. numactl --hardware 9. /proc/meminfo 10. who -r 11. Systemd service manager version: systemd 250 (250-6.el9_0) 12. Services, from systemctl list-unit-files 13. Linux kernel boot-time arguments, from /proc/cmdline 14. cpupower frequency-info 15. sysctl 16. /sys/kernel/mm/transparent_hugepage 17. /sys/kernel/mm/transparent_hugepage/khugepaged 18. OS release 19. Disk information 20. /sys/devices/virtual/dmi/id 21. dmidecode 22. BIOS ------------------------------------------------------------ ------------------------------------------------------------ 1. uname -a Linux localhost.localdomain 5.14.0-70.13.1.el9_0.x86_64 #1 SMP PREEMPT Thu Apr 14 12:42:38 EDT 2022 x86_64 x86_64 x86_64 GNU/Linux ------------------------------------------------------------ 2. w 15:11:54 up 2 min, 1 user, load average: 0.16, 0.16, 0.07 USER TTY LOGIN@ IDLE JCPU PCPU WHAT root pts/0 15:10 10.00s 1.17s 0.03s /bin/bash ./amd_speed_aocc320_milanx_A1.sh ------------------------------------------------------------ 3. Username From environment variable $USER: root ------------------------------------------------------------ 4. ulimit -a real-time non-blocking time (microseconds, -R) unlimited core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 2061813 max locked memory (kbytes, -l) 2097152 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) unlimited cpu time (seconds, -t) unlimited max user processes (-u) 2061813 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited ------------------------------------------------------------ 5. sysinfo process ancestry /usr/lib/systemd/systemd --switched-root --system --deserialize 27 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups sshd: root [priv] sshd: root@pts/0 -bash python3 ./run_fpspeed.py /bin/bash ./amd_speed_aocc320_milanx_A1.sh runcpu --config amd_speed_aocc320_milanx_A1.cfg --tune all --reportable --iterations 3 fpspeed runcpu --configfile amd_speed_aocc320_milanx_A1.cfg --tune all --reportable --iterations 3 --nopower --runmode speed --tune base:peak --size test:train:refspeed fpspeed --nopreenv --note-preenv --logfile $SPEC/tmp/CPU2017.004/templogs/preenv.fpspeed.004.0.log --lognum 004.0 --from_runcpu 2 specperl $SPEC/bin/sysinfo $SPEC = /home/cpu2017 ------------------------------------------------------------ 6. /proc/cpuinfo model name : AMD EPYC 7663P 56-Core Processor vendor_id : AuthenticAMD cpu family : 25 model : 1 stepping : 1 microcode : 0xa0011d1 bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass TLB size : 2560 4K pages cpu cores : 56 siblings : 56 1 physical ids (chips) 56 processors (hardware threads) physical id 0: core ids 0-6,8-14,16-22,24-30,32-38,40-46,48-54,56-62 physical id 0: apicids 0-6,8-14,16-22,24-30,32-38,40-46,48-54,56-62 Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for virtualized systems. Use the above data carefully. ------------------------------------------------------------ 7. lscpu From lscpu from util-linux 2.37.4: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes: 48 bits physical, 48 bits virtual Byte Order: Little Endian CPU(s): 56 On-line CPU(s) list: 0-55 Vendor ID: AuthenticAMD BIOS Vendor ID: Advanced Micro Devices, Inc. Model name: AMD EPYC 7663P 56-Core Processor BIOS Model name: AMD EPYC 7663P 56-Core Processor CPU family: 25 Model: 1 Thread(s) per core: 1 Core(s) per socket: 56 Socket(s): 1 Stepping: 1 Frequency boost: enabled CPU max MHz: 2000.0000 CPU min MHz: 1500.0000 BogoMIPS: 3992.57 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 invpcid_single hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold v_vmsave_vmload vgif v_spec_ctrl umip pku ospke vaes vpclmulqdq rdpid overflow_recov succor smca fsrm Virtualization: AMD-V L1d cache: 1.8 MiB (56 instances) L1i cache: 1.8 MiB (56 instances) L2 cache: 28 MiB (56 instances) L3 cache: 256 MiB (8 instances) NUMA node(s): 1 NUMA node0 CPU(s): 0-55 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIBP disabled, RSB filling Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected From lscpu --cache: NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE L1d 32K 1.8M 8 Data 1 64 1 64 L1i 32K 1.8M 8 Instruction 1 64 1 64 L2 512K 28M 8 Unified 2 1024 1 64 L3 32M 256M 16 Unified 3 32768 1 64 ------------------------------------------------------------ 8. numactl --hardware NOTE: a numactl 'node' might or might not correspond to a physical chip. available: 1 nodes (0) node 0 cpus: 0-55 node 0 size: 515584 MB node 0 free: 514358 MB node distances: node 0 0: 10 ------------------------------------------------------------ 9. /proc/meminfo MemTotal: 527958236 kB ------------------------------------------------------------ 10. who -r run-level 3 Dec 1 15:09 ------------------------------------------------------------ 11. Systemd service manager version: systemd 250 (250-6.el9_0) Default Target Status multi-user running ------------------------------------------------------------ 12. Services, from systemctl list-unit-files STATE UNIT FILES enabled NetworkManager NetworkManager-dispatcher NetworkManager-wait-online auditd crond dbus-broker firewalld getty@ irqbalance kdump lvm2-monitor mdmonitor microcode nis-domainname rhsmcertd rsyslog selinux-autorelabel-mark sshd sssd systemd-network-generator udisks2 enabled-runtime systemd-remount-fs disabled blk-availability chrony-wait chronyd console-getty cpupower debug-shell hwloc-dump-hwdata kvm_stat man-db-restart-cache-update nftables rdisc rhsm rhsm-facts rpmdb-rebuild serial-getty@ sshd-keygen@ systemd-boot-check-no-failures systemd-pstore systemd-sysext target targetclid indirect sssd-autofs sssd-kcm sssd-nss sssd-pac sssd-pam sssd-ssh sssd-sudo ------------------------------------------------------------ 13. Linux kernel boot-time arguments, from /proc/cmdline BOOT_IMAGE=(hd0,gpt2)/vmlinuz-0-rescue-de810009b7df4a35a4c7454f61f3731c root=/dev/mapper/rhel-root ro resume=/dev/mapper/rhel-swap rd.lvm.lv=rhel/root rd.lvm.lv=rhel/swap ------------------------------------------------------------ 14. cpupower frequency-info analyzing CPU 0: current policy: frequency should be within 1.50 GHz and 2.00 GHz. The governor "performance" may decide which speed to use within this range. boost state support: Supported: yes Active: yes Boost States: 0 Total States: 3 Pstate-P0: 2000MHz ------------------------------------------------------------ 15. sysctl kernel.numa_balancing 0 kernel.randomize_va_space 0 vm.compaction_proactiveness 20 vm.dirty_background_bytes 0 vm.dirty_background_ratio 10 vm.dirty_bytes 0 vm.dirty_expire_centisecs 3000 vm.dirty_ratio 8 vm.dirty_writeback_centisecs 500 vm.dirtytime_expire_seconds 43200 vm.extfrag_threshold 500 vm.min_unmapped_ratio 1 vm.nr_hugepages 0 vm.nr_hugepages_mempolicy 0 vm.nr_overcommit_hugepages 0 vm.swappiness 1 vm.watermark_boost_factor 15000 vm.watermark_scale_factor 10 vm.zone_reclaim_mode 1 ------------------------------------------------------------ 16. /sys/kernel/mm/transparent_hugepage defrag always defer defer+madvise [madvise] never enabled always [madvise] never hpage_pmd_size 2097152 shmem_enabled always within_size advise [never] deny force ------------------------------------------------------------ 17. /sys/kernel/mm/transparent_hugepage/khugepaged alloc_sleep_millisecs 60000 defrag 1 max_ptes_none 511 max_ptes_shared 256 max_ptes_swap 64 pages_to_scan 4096 scan_sleep_millisecs 10000 ------------------------------------------------------------ 18. OS release From /etc/*-release /etc/*-version os-release Red Hat Enterprise Linux 9.0 (Plow) redhat-release Red Hat Enterprise Linux release 9.0 (Plow) system-release Red Hat Enterprise Linux release 9.0 (Plow) ------------------------------------------------------------ 19. Disk information SPEC is set to: /home/cpu2017 Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/rhel-home xfs 372G 9.6G 362G 3% /home ------------------------------------------------------------ 20. /sys/devices/virtual/dmi/id Vendor: HPE Product: ProLiant DL325 Gen10 Plus v2 Product Family: ProLiant Serial: CN70381LLR ------------------------------------------------------------ 21. dmidecode Additional information from dmidecode 3.3 follows. WARNING: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. Memory: 8x Micron 36ASF8G72PZ-3G2B2 64 GB 2 rank 3200 ------------------------------------------------------------ 22. BIOS (This section combines info from /sys/devices and dmidecode.) BIOS Vendor: HPE BIOS Version: A43 BIOS Date: 10/27/2023 BIOS Revision: 2.90 Firmware Revision: 2.72 Compiler Version Notes ---------------------- ============================================================================================================ C | 619.lbm_s(base, peak) 638.imagick_s(base, peak) 644.nab_s(base, peak) ------------------------------------------------------------------------------------------------------------ AMD clang version 13.0.0 (CLANG: AOCC_3.2.0-Build#128 2021_11_12) (based on LLVM Mirror.Version.13.0.0) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /opt/AMD/aocc-compiler-3.2.0/bin ------------------------------------------------------------------------------------------------------------ ============================================================================================================ C++, C, Fortran | 607.cactuBSSN_s(base, peak) ------------------------------------------------------------------------------------------------------------ AMD clang version 13.0.0 (CLANG: AOCC_3.2.0-Build#128 2021_11_12) (based on LLVM Mirror.Version.13.0.0) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /opt/AMD/aocc-compiler-3.2.0/bin AMD clang version 13.0.0 (CLANG: AOCC_3.2.0-Build#128 2021_11_12) (based on LLVM Mirror.Version.13.0.0) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /opt/AMD/aocc-compiler-3.2.0/bin AMD clang version 13.0.0 (CLANG: AOCC_3.2.0-Build#128 2021_11_12) (based on LLVM Mirror.Version.13.0.0) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /opt/AMD/aocc-compiler-3.2.0/bin ------------------------------------------------------------------------------------------------------------ ============================================================================================================ Fortran | 603.bwaves_s(base, peak) 649.fotonik3d_s(base, peak) 654.roms_s(base, peak) ------------------------------------------------------------------------------------------------------------ AMD clang version 13.0.0 (CLANG: AOCC_3.2.0-Build#128 2021_11_12) (based on LLVM Mirror.Version.13.0.0) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /opt/AMD/aocc-compiler-3.2.0/bin ------------------------------------------------------------------------------------------------------------ ============================================================================================================ Fortran, C | 621.wrf_s(base, peak) 627.cam4_s(base, peak) 628.pop2_s(base, peak) ------------------------------------------------------------------------------------------------------------ AMD clang version 13.0.0 (CLANG: AOCC_3.2.0-Build#128 2021_11_12) (based on LLVM Mirror.Version.13.0.0) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /opt/AMD/aocc-compiler-3.2.0/bin AMD clang version 13.0.0 (CLANG: AOCC_3.2.0-Build#128 2021_11_12) (based on LLVM Mirror.Version.13.0.0) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /opt/AMD/aocc-compiler-3.2.0/bin ------------------------------------------------------------------------------------------------------------ Base Compiler Invocation ------------------------ C benchmarks: clang Fortran benchmarks: flang Benchmarks using both Fortran and C: flang clang Benchmarks using Fortran, C, and C++: clang++ clang flang Base Portability Flags ---------------------- 603.bwaves_s: -DSPEC_LP64 607.cactuBSSN_s: -DSPEC_LP64 619.lbm_s: -DSPEC_LP64 621.wrf_s: -DSPEC_CASE_FLAG -Mbyteswapio -DSPEC_LP64 627.cam4_s: -DSPEC_CASE_FLAG -DSPEC_LP64 628.pop2_s: -DSPEC_CASE_FLAG -Mbyteswapio -DSPEC_LP64 638.imagick_s: -DSPEC_LP64 644.nab_s: -DSPEC_LP64 649.fotonik3d_s: -DSPEC_LP64 654.roms_s: -DSPEC_LP64 Base Optimization Flags ----------------------- C benchmarks: -m64 -Wl,-mllvm -Wl,-region-vectorize -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 -Wl,-mllvm -Wl,-reduce-array-computations=3 -O3 -march=znver3 -fveclib=AMDLIBM -ffast-math -fopenmp -flto -fstruct-layout=5 -mllvm -unroll-threshold=50 -mllvm -inline-threshold=1000 -fremap-arrays -mllvm -function-specialize -flv-function-specialization -mllvm -enable-gvn-hoist -mllvm -global-vectorize-slp=true -mllvm -enable-licm-vrp -mllvm -reduce-array-computations=3 -z muldefs -DSPEC_OPENMP -fopenmp=libomp -lomp -lamdlibm -ljemalloc -lflang Fortran benchmarks: -m64 -Wl,-mllvm -Wl,-enable-X86-prefetching -Wl,-mllvm -Wl,-enable-licm-vrp -Wl,-mllvm -Wl,-region-vectorize -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 -Wl,-mllvm -Wl,-reduce-array-computations=3 -Hz,1,0x1 -O3 -march=znver3 -fveclib=AMDLIBM -ffast-math -fopenmp -Mrecursive -mllvm -fuse-tile-inner-loop -funroll-loops -mllvm -extra-vectorizer-passes -mllvm -lsr-in-nested-loop -mllvm -enable-licm-vrp -mllvm -reduce-array-computations=3 -mllvm -global-vectorize-slp=true -mllvm -enable-loopinterchange -mllvm -compute-interchange-order -z muldefs -DSPEC_OPENMP -fopenmp=libomp -lomp -lamdlibm -ljemalloc -lflang Benchmarks using both Fortran and C: -m64 -Wl,-mllvm -Wl,-enable-X86-prefetching -Wl,-mllvm -Wl,-enable-licm-vrp -Wl,-mllvm -Wl,-region-vectorize -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 -Wl,-mllvm -Wl,-reduce-array-computations=3 -O3 -march=znver3 -fveclib=AMDLIBM -ffast-math -fopenmp -flto -fstruct-layout=5 -mllvm -unroll-threshold=50 -mllvm -inline-threshold=1000 -fremap-arrays -mllvm -function-specialize -flv-function-specialization -mllvm -enable-gvn-hoist -mllvm -global-vectorize-slp=true -mllvm -enable-licm-vrp -mllvm -reduce-array-computations=3 -Hz,1,0x1 -Mrecursive -mllvm -fuse-tile-inner-loop -funroll-loops -mllvm -extra-vectorizer-passes -mllvm -lsr-in-nested-loop -mllvm -enable-loopinterchange -mllvm -compute-interchange-order -z muldefs -DSPEC_OPENMP -fopenmp=libomp -lomp -lamdlibm -ljemalloc -lflang Benchmarks using Fortran, C, and C++: -m64 -Wl,-mllvm -Wl,-x86-use-vzeroupper=false -Wl,-mllvm -Wl,-region-vectorize -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 -Wl,-mllvm -Wl,-reduce-array-computations=3 -O3 -march=znver3 -fveclib=AMDLIBM -ffast-math -fopenmp -flto -fstruct-layout=5 -mllvm -unroll-threshold=50 -mllvm -inline-threshold=1000 -fremap-arrays -mllvm -function-specialize -flv-function-specialization -mllvm -enable-gvn-hoist -mllvm -global-vectorize-slp=true -mllvm -enable-licm-vrp -mllvm -reduce-array-computations=3 -mllvm -enable-partial-unswitch -mllvm -unroll-threshold=100 -finline-aggressive -mllvm -loop-unswitch-threshold=200000 -mllvm -reroll-loops -mllvm -aggressive-loop-unswitch -mllvm -extra-vectorizer-passes -mllvm -convert-pow-exp-to-int=false -Hz,1,0x1 -Mrecursive -mllvm -fuse-tile-inner-loop -funroll-loops -mllvm -lsr-in-nested-loop -mllvm -enable-loopinterchange -mllvm -compute-interchange-order -z muldefs -DSPEC_OPENMP -fopenmp=libomp -lomp -lamdlibm -ljemalloc -lflang Base Other Flags ---------------- C benchmarks: -Wno-unused-command-line-argument -Wno-return-type Fortran benchmarks: -Wno-unused-command-line-argument -Wno-return-type Benchmarks using both Fortran and C: -Wno-unused-command-line-argument -Wno-return-type Benchmarks using Fortran, C, and C++: -Wno-unused-command-line-argument -Wno-return-type Peak Compiler Invocation ------------------------ C benchmarks: clang Fortran benchmarks: flang Benchmarks using both Fortran and C: flang clang Benchmarks using Fortran, C, and C++: clang++ clang flang Peak Portability Flags ---------------------- Same as Base Portability Flags Peak Optimization Flags ----------------------- C benchmarks: 619.lbm_s: basepeak = yes 638.imagick_s: basepeak = yes 644.nab_s: basepeak = yes Fortran benchmarks: 603.bwaves_s: -m64 -Wl,-mllvm -Wl,-enable-X86-prefetching -Wl,-mllvm -Wl,-enable-licm-vrp -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 -Wl,-mllvm -Wl,-reduce-array-computations=3 -Ofast -march=znver3 -fveclib=AMDLIBM -ffast-math -fopenmp -Mrecursive -mllvm -reduce-array-computations=3 -mllvm -global-vectorize-slp=true -mllvm -enable-licm-vrp -DSPEC_OPENMP -fopenmp=libomp -lomp -lamdlibm -ljemalloc -lflang 649.fotonik3d_s: basepeak = yes 654.roms_s: Same as 603.bwaves_s Benchmarks using both Fortran and C: 621.wrf_s: -m64 -Wl,-mllvm -Wl,-enable-X86-prefetching -Wl,-mllvm -Wl,-enable-licm-vrp -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 -Wl,-mllvm -Wl,-reduce-array-computations=3 -Ofast -march=znver3 -fveclib=AMDLIBM -ffast-math -fopenmp -flto -fstruct-layout=5 -mllvm -unroll-threshold=50 -fremap-arrays -flv-function-specialization -mllvm -inline-threshold=1000 -mllvm -enable-gvn-hoist -mllvm -global-vectorize-slp=true -mllvm -function-specialize -mllvm -enable-licm-vrp -mllvm -reduce-array-computations=3 -Hz,1,0x1 -Mrecursive -mllvm -fuse-tile-inner-loop -funroll-loops -mllvm -extra-vectorizer-passes -mllvm -lsr-in-nested-loop -mllvm -enable-loopinterchange -mllvm -compute-interchange-order -DSPEC_OPENMP -fopenmp=libomp -lomp -lamdlibm -ljemalloc -lflang 627.cam4_s: basepeak = yes 628.pop2_s: basepeak = yes Benchmarks using Fortran, C, and C++: -m64 -Wl,-mllvm -Wl,-x86-use-vzeroupper=false -Wl,-mllvm -Wl,-enable-licm-vrp -Wl,-mllvm -Wl,-do-block-reorder=aggressive -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 -Wl,-mllvm -Wl,-reduce-array-computations=3 -Ofast -march=znver3 -fveclib=AMDLIBM -ffast-math -fopenmp -flto -fstruct-layout=5 -mllvm -unroll-threshold=50 -fremap-arrays -flv-function-specialization -mllvm -inline-threshold=1000 -mllvm -enable-gvn-hoist -mllvm -global-vectorize-slp=true -mllvm -function-specialize -mllvm -enable-licm-vrp -mllvm -reduce-array-computations=3 -finline-aggressive -mllvm -unroll-threshold=100 -mllvm -reroll-loops -mllvm -aggressive-loop-unswitch -Mrecursive -mllvm -do-block-reorder=aggressive -DSPEC_OPENMP -fopenmp=libomp -lomp -lamdlibm -ljemalloc -lflang Peak Other Flags ---------------- C benchmarks: -Wno-unused-command-line-argument -Wno-return-type Fortran benchmarks: -Wno-unused-command-line-argument -Wno-return-type Benchmarks using both Fortran and C: -Wno-unused-command-line-argument -Wno-return-type Benchmarks using Fortran, C, and C++: -Wno-unused-command-line-argument -Wno-return-type The flags files that were used to format this result can be browsed at http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-AMD-V1.3-EPYC-revS.html http://www.spec.org/cpu2017/flags/aocc320-flags-A1.html You can also download the XML flags sources by saving the following links: http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-AMD-V1.3-EPYC-revS.xml http://www.spec.org/cpu2017/flags/aocc320-flags-A1.xml SPEC CPU and SPECspeed are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. ---------------------------------------------------------------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact info@spec.org. Copyright 2017-2023 Standard Performance Evaluation Corporation Tested with SPEC CPU(R)2017 v1.1.9 on 2023-12-01 04:41:53-0500. Report generated on 2023-12-20 13:11:42 by CPU2017 text formatter v6255. Originally published on 2023-12-20.