# Invocation command line: # /home/CPU2017/bin/harness/runcpu --configfile amd_speed_aocc400_genoa_B1.cfg --tune all --reportable --iterations 3 --nopower --runmode speed --tune base:peak --size test:train:refspeed fpspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 400 SPEC CPU 2017 V1.1.8 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc400_genoa_B1.cfg # Creation Date : October 6, 2022 # CPU 2017 Version : 1.1.8 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 4.0.0 # Operating system version : RHEL 8.6 # Supported OS's : Ubuntu 22.04, RHEL 8.6/9, SLE 15 SP4 # Hardware : AMD Genoa (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc400_genoa_B1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD Genoa-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Genoa microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc400_genoa_B1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # Genoa-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other Genoa configurations, please review # "Readme.amd_speed_aocc400_genoa_B1.txt". In general, Genoa CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc400_genoa_B1.cfg" or any # other file besides "ini_amd_speed_aocc400_genoa_B1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc400 %define binary_package_name amd_speed_%{compiler_name}_genoa_B %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path ${SPEC} %define flags_file_name %{compiler_name}-flags.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc400_genoa_B_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = oversize_threshold:0,retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:%{ENV_LD_LIBRARY_PATH} %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_genoa_B1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc400_genoa_B1.inc # File generation code date: October 11, 2022 # File generation date/time: June 27, 2022 / 18:44:15 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 128 %define physical_core_count 128 %define physical_core_max 127 %define logical_core_max 127 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from 'genoa64' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 128 preENV_GOMP_CPU_AFFINITY = 0-127 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 15 bind0 = numactl --physcpubind=15 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 128 603.bwaves_s,619.lbm_s,621.wrf_s,628.pop2_s,649.fotonik3d_s=peak: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 128 607.cactuBSSN_s,627.cam4_s,638.imagick_s,644.nab_s,657.xz_s=peak: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 128 654.roms_s=peak: threads = 128 ENV_GOMP_CPU_AFFINITY = 0 64 1 65 2 66 3 67 4 68 5 69 6 70 7 71 8 72 9 73 10 74 11 75 12 76 13 77 14 78 15 79 16 80 17 81 18 82 19 83 20 84 21 85 22 86 23 87 24 88 25 89 26 90 27 91 28 92 29 93 30 94 31 95 32 96 33 97 34 98 35 99 36 100 37 101 38 102 39 103 40 104 41 105 42 106 43 107 44 108 45 109 46 110 47 111 48 112 49 113 50 114 51 115 52 116 53 117 54 118 55 119 56 120 57 121 58 122 59 123 60 124 61 125 62 126 63 127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =3 tester =HPE test_sponsor =HPE hw_vendor =Hewlett Packard Enterprise hw_model000 =ProLiant DL385 Gen11 hw_model001 =(3.10 GHz, AMD EPYC 9554) #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 4.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Dec-2022 sw_avail =Nov-2022 hw_cpu_name =AMD EPYC GENOA64 hw_cpu_nominal_mhz =3100 hw_cpu_max_mhz =3750 hw_ncores =128 hw_nthreadspercore =1 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios000 =HPE BIOS Version v1.12 11/24/2022 released fw_bios001 = Nov-2022 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =256 MB I+D on chip per chip, hw_tcache001 = 32 MB shared / 8 cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =64-bit notes_os_thp_015 =To always enable THP for peak runs of: notes_os_thp_020 =603.bwaves_s, 607.cactuBSSN_s, 619.lbm_s, 627.cam4_s, 628.pop2_s, 638.imagick_s, 644.nab_s, 649.fotonik3d_s: notes_os_thp_025 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_030 =run as root. notes_os_thp_035 =To disable THP for peak runs of 621.wrf_s: notes_os_thp_040 ='echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_045 =run as root. notes_os_thp_050 =To enable THP only on request for peak runs of 654.roms_s: notes_os_thp_055 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_060 =run as root. ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =1 x 480 GB SATA SSD hw_memory =1536 GB (24 x 64 GB 2Rx4 PC5-4800B-R) hw_nchips =2 prepared_by =HPE Performance Engineering sw_file =ext4 sw_os000 =Ubuntu 22.04.1 LTS sw_os001 =Kernel 5.15.0-56-generic sw_state =Run level 5 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/home/CPU2017/config/amd_speed_aocc400_genoa_B1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-AMD-Genoa-rev2.1.xml flagsurl001 = http://www.spec.org/cpu2017/flags/aocc400-flags.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_genoa_B1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 4.0.0 SPEC CPU2017 V1.1.8 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver4 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = echo "$command" > run.sh ; $BIND bash run.sh ############################################################################### # AOCC 4.0.0 workarounds that do not count as PORTABILITY ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## intrate=base: # The following is necessary for 602 gcc: EXTRA_LDFLAGS = -z muldefs ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## 602.gcc_s=peak: #lang='C' EXTRA_LDFLAGS = -z muldefs ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -finline-aggressive \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=9 \ -mllvm -unroll-threshold=50 \ -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT_BASE) \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm 627.cam4_s=peak: #lang='F,C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' ENV_PGHPF_ZMEM = yes submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 657.xz_s=peak: #lang='C' ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 8 # ---- End inclusion of '/home/CPU2017/config/amd_speed_aocc400_genoa_B1_flags.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:679c83684f6f4fc369a093999b6661d0a378911de2a006d3245423ad80d3fb9a) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/CPU2017/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d notes_plat_sysinfo_015 = running on admin1 Mon Jun 27 18:44:30 2022 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = For more information on this section, see notes_plat_sysinfo_035 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : AMD EPYC 9554 64-Core Processor notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 128 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_070 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_075 = cpu cores : 64 notes_plat_sysinfo_080 = siblings : 64 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 16 17 18 19 20 21 22 23 32 33 34 35 36 37 38 39 notes_plat_sysinfo_090 = 48 49 50 51 52 53 54 55 64 65 66 67 68 69 70 71 80 81 82 83 84 85 86 87 96 97 98 99 notes_plat_sysinfo_095 = 100 101 102 103 112 113 114 115 116 117 118 119 notes_plat_sysinfo_100 = physical 1: cores 0 1 2 3 4 5 6 7 16 17 18 19 20 21 22 23 32 33 34 35 36 37 38 39 notes_plat_sysinfo_105 = 48 49 50 51 52 53 54 55 64 65 66 67 68 69 70 71 80 81 82 83 84 85 86 87 96 97 98 99 notes_plat_sysinfo_110 = 100 101 102 103 112 113 114 115 116 117 118 119 notes_plat_sysinfo_115 = notes_plat_sysinfo_120 = From lscpu from util-linux 2.37.2: notes_plat_sysinfo_125 = Architecture: x86_64 notes_plat_sysinfo_130 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_135 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_140 = Byte Order: Little Endian notes_plat_sysinfo_145 = CPU(s): 128 notes_plat_sysinfo_150 = On-line CPU(s) list: 0-127 notes_plat_sysinfo_155 = Vendor ID: AuthenticAMD notes_plat_sysinfo_160 = Model name: AMD EPYC 9554 64-Core Processor notes_plat_sysinfo_165 = CPU family: 25 notes_plat_sysinfo_170 = Model: 17 notes_plat_sysinfo_175 = Thread(s) per core: 1 notes_plat_sysinfo_180 = Core(s) per socket: 64 notes_plat_sysinfo_185 = Socket(s): 2 notes_plat_sysinfo_190 = Stepping: 1 notes_plat_sysinfo_195 = Frequency boost: enabled notes_plat_sysinfo_200 = CPU max MHz: 3764.0000 notes_plat_sysinfo_205 = CPU min MHz: 400.0000 notes_plat_sysinfo_210 = BogoMIPS: 6190.55 notes_plat_sysinfo_215 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr notes_plat_sysinfo_220 = pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt notes_plat_sysinfo_225 = pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid notes_plat_sysinfo_230 = aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe notes_plat_sysinfo_235 = popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a notes_plat_sysinfo_240 = misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb notes_plat_sysinfo_245 = bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 invpcid_single hw_pstate ssbd mba ibrs notes_plat_sysinfo_250 = ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a avx512f notes_plat_sysinfo_255 = avx512dq rdseed adx smap avx512ifma clflushopt clwb avx512cd sha_ni avx512bw notes_plat_sysinfo_260 = avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total notes_plat_sysinfo_265 = cqm_mbm_local avx512_bf16 clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin cppc arat notes_plat_sysinfo_270 = npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists notes_plat_sysinfo_275 = pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl avx512vbmi umip pku notes_plat_sysinfo_280 = ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq notes_plat_sysinfo_285 = la57 rdpid overflow_recov succor smca fsrm flush_l1d notes_plat_sysinfo_290 = Virtualization: AMD-V notes_plat_sysinfo_295 = L1d cache: 4 MiB (128 instances) notes_plat_sysinfo_300 = L1i cache: 4 MiB (128 instances) notes_plat_sysinfo_305 = L2 cache: 128 MiB (128 instances) notes_plat_sysinfo_310 = L3 cache: 512 MiB (16 instances) notes_plat_sysinfo_315 = NUMA node(s): 16 notes_plat_sysinfo_320 = NUMA node0 CPU(s): 0-7 notes_plat_sysinfo_325 = NUMA node1 CPU(s): 32-39 notes_plat_sysinfo_330 = NUMA node2 CPU(s): 16-23 notes_plat_sysinfo_335 = NUMA node3 CPU(s): 48-55 notes_plat_sysinfo_340 = NUMA node4 CPU(s): 24-31 notes_plat_sysinfo_345 = NUMA node5 CPU(s): 56-63 notes_plat_sysinfo_350 = NUMA node6 CPU(s): 8-15 notes_plat_sysinfo_355 = NUMA node7 CPU(s): 40-47 notes_plat_sysinfo_360 = NUMA node8 CPU(s): 64-71 notes_plat_sysinfo_365 = NUMA node9 CPU(s): 96-103 notes_plat_sysinfo_370 = NUMA node10 CPU(s): 80-87 notes_plat_sysinfo_375 = NUMA node11 CPU(s): 112-119 notes_plat_sysinfo_380 = NUMA node12 CPU(s): 88-95 notes_plat_sysinfo_385 = NUMA node13 CPU(s): 120-127 notes_plat_sysinfo_390 = NUMA node14 CPU(s): 72-79 notes_plat_sysinfo_395 = NUMA node15 CPU(s): 104-111 notes_plat_sysinfo_400 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_405 = Vulnerability L1tf: Not affected notes_plat_sysinfo_410 = Vulnerability Mds: Not affected notes_plat_sysinfo_415 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_420 = Vulnerability Mmio stale data: Not affected notes_plat_sysinfo_425 = Vulnerability Retbleed: Not affected notes_plat_sysinfo_430 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via notes_plat_sysinfo_435 = prctl and seccomp notes_plat_sysinfo_440 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user notes_plat_sysinfo_445 = pointer sanitization notes_plat_sysinfo_450 = Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, notes_plat_sysinfo_455 = STIBP disabled, RSB filling, PBRSB-eIBRS Not affected notes_plat_sysinfo_460 = Vulnerability Srbds: Not affected notes_plat_sysinfo_465 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_470 = notes_plat_sysinfo_475 = From lscpu --cache: notes_plat_sysinfo_480 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_485 = L1d 32K 4M 8 Data 1 64 1 64 notes_plat_sysinfo_490 = L1i 32K 4M 8 Instruction 1 64 1 64 notes_plat_sysinfo_495 = L2 1M 128M 8 Unified 2 2048 1 64 notes_plat_sysinfo_500 = L3 32M 512M 16 Unified 3 32768 1 64 notes_plat_sysinfo_505 = notes_plat_sysinfo_510 = /proc/cpuinfo cache data notes_plat_sysinfo_515 = cache size : 1024 KB notes_plat_sysinfo_520 = notes_plat_sysinfo_525 = From numactl --hardware notes_plat_sysinfo_530 = WARNING: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_535 = available: 16 nodes (0-15) notes_plat_sysinfo_540 = node 0 cpus: 0 1 2 3 4 5 6 7 notes_plat_sysinfo_545 = node 0 size: 96455 MB notes_plat_sysinfo_550 = node 0 free: 96162 MB notes_plat_sysinfo_555 = node 1 cpus: 32 33 34 35 36 37 38 39 notes_plat_sysinfo_560 = node 1 size: 96765 MB notes_plat_sysinfo_565 = node 1 free: 96592 MB notes_plat_sysinfo_570 = node 2 cpus: 16 17 18 19 20 21 22 23 notes_plat_sysinfo_575 = node 2 size: 96765 MB notes_plat_sysinfo_580 = node 2 free: 96570 MB notes_plat_sysinfo_585 = node 3 cpus: 48 49 50 51 52 53 54 55 notes_plat_sysinfo_590 = node 3 size: 96765 MB notes_plat_sysinfo_595 = node 3 free: 96566 MB notes_plat_sysinfo_600 = node 4 cpus: 24 25 26 27 28 29 30 31 notes_plat_sysinfo_605 = node 4 size: 96765 MB notes_plat_sysinfo_610 = node 4 free: 96563 MB notes_plat_sysinfo_615 = node 5 cpus: 56 57 58 59 60 61 62 63 notes_plat_sysinfo_620 = node 5 size: 96730 MB notes_plat_sysinfo_625 = node 5 free: 96483 MB notes_plat_sysinfo_630 = node 6 cpus: 8 9 10 11 12 13 14 15 notes_plat_sysinfo_635 = node 6 size: 96765 MB notes_plat_sysinfo_640 = node 6 free: 96555 MB notes_plat_sysinfo_645 = node 7 cpus: 40 41 42 43 44 45 46 47 notes_plat_sysinfo_650 = node 7 size: 96765 MB notes_plat_sysinfo_655 = node 7 free: 96590 MB notes_plat_sysinfo_660 = node 8 cpus: 64 65 66 67 68 69 70 71 notes_plat_sysinfo_665 = node 8 size: 96765 MB notes_plat_sysinfo_670 = node 8 free: 96651 MB notes_plat_sysinfo_675 = node 9 cpus: 96 97 98 99 100 101 102 103 notes_plat_sysinfo_680 = node 9 size: 96765 MB notes_plat_sysinfo_685 = node 9 free: 96644 MB notes_plat_sysinfo_690 = node 10 cpus: 80 81 82 83 84 85 86 87 notes_plat_sysinfo_695 = node 10 size: 96765 MB notes_plat_sysinfo_700 = node 10 free: 96640 MB notes_plat_sysinfo_705 = node 11 cpus: 112 113 114 115 116 117 118 119 notes_plat_sysinfo_710 = node 11 size: 96765 MB notes_plat_sysinfo_715 = node 11 free: 96645 MB notes_plat_sysinfo_720 = node 12 cpus: 88 89 90 91 92 93 94 95 notes_plat_sysinfo_725 = node 12 size: 96765 MB notes_plat_sysinfo_730 = node 12 free: 96638 MB notes_plat_sysinfo_735 = node 13 cpus: 120 121 122 123 124 125 126 127 notes_plat_sysinfo_740 = node 13 size: 96716 MB notes_plat_sysinfo_745 = node 13 free: 96588 MB notes_plat_sysinfo_750 = node 14 cpus: 72 73 74 75 76 77 78 79 notes_plat_sysinfo_755 = node 14 size: 96765 MB notes_plat_sysinfo_760 = node 14 free: 96652 MB notes_plat_sysinfo_765 = node 15 cpus: 104 105 106 107 108 109 110 111 notes_plat_sysinfo_770 = node 15 size: 96765 MB notes_plat_sysinfo_775 = node 15 free: 96629 MB notes_plat_sysinfo_780 = node distances: notes_plat_sysinfo_785 = node 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_790 = 0: 10 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_795 = 1: 11 10 11 11 11 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_800 = 2: 11 11 10 11 11 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_805 = 3: 11 11 11 10 11 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_810 = 4: 11 11 11 11 10 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_815 = 5: 11 11 11 11 11 10 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_820 = 6: 11 11 11 11 11 11 10 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_825 = 7: 11 11 11 11 11 11 11 10 32 32 32 32 32 32 32 32 notes_plat_sysinfo_830 = 8: 32 32 32 32 32 32 32 32 10 11 11 11 11 11 11 11 notes_plat_sysinfo_835 = 9: 32 32 32 32 32 32 32 32 11 10 11 11 11 11 11 11 notes_plat_sysinfo_840 = 10: 32 32 32 32 32 32 32 32 11 11 10 11 11 11 11 11 notes_plat_sysinfo_845 = 11: 32 32 32 32 32 32 32 32 11 11 11 10 11 11 11 11 notes_plat_sysinfo_850 = 12: 32 32 32 32 32 32 32 32 11 11 11 11 10 11 11 11 notes_plat_sysinfo_855 = 13: 32 32 32 32 32 32 32 32 11 11 11 11 11 10 11 11 notes_plat_sysinfo_860 = 14: 32 32 32 32 32 32 32 32 11 11 11 11 11 11 10 11 notes_plat_sysinfo_865 = 15: 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 10 notes_plat_sysinfo_870 = notes_plat_sysinfo_875 = From /proc/meminfo notes_plat_sysinfo_880 = MemTotal: 1585007776 kB notes_plat_sysinfo_885 = HugePages_Total: 0 notes_plat_sysinfo_890 = Hugepagesize: 2048 kB notes_plat_sysinfo_895 = notes_plat_sysinfo_900 = /sbin/tuned-adm active notes_plat_sysinfo_905 = Current active profile: balanced notes_plat_sysinfo_910 = notes_plat_sysinfo_915 = /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has notes_plat_sysinfo_920 = conservative notes_plat_sysinfo_925 = notes_plat_sysinfo_930 = /usr/bin/lsb_release -d notes_plat_sysinfo_935 = Ubuntu 22.04.1 LTS notes_plat_sysinfo_940 = notes_plat_sysinfo_945 = From /etc/*release* /etc/*version* notes_plat_sysinfo_950 = debian_version: bookworm/sid notes_plat_sysinfo_955 = os-release: notes_plat_sysinfo_960 = PRETTY_NAME="Ubuntu 22.04.1 LTS" notes_plat_sysinfo_965 = NAME="Ubuntu" notes_plat_sysinfo_970 = VERSION_ID="22.04" notes_plat_sysinfo_975 = VERSION="22.04.1 LTS (Jammy Jellyfish)" notes_plat_sysinfo_980 = VERSION_CODENAME=jammy notes_plat_sysinfo_985 = ID=ubuntu notes_plat_sysinfo_990 = ID_LIKE=debian notes_plat_sysinfo_995 = HOME_URL="https://www.ubuntu.com/" notes_plat_sysinfo_1000 = notes_plat_sysinfo_1005 = uname -a: notes_plat_sysinfo_1010 = Linux admin1 5.15.0-56-generic #62-Ubuntu SMP Tue Nov 22 19:54:14 UTC 2022 x86_64 notes_plat_sysinfo_1015 = x86_64 x86_64 GNU/Linux notes_plat_sysinfo_1020 = notes_plat_sysinfo_1025 = Kernel self-reported vulnerability status: notes_plat_sysinfo_1030 = notes_plat_sysinfo_1035 = CVE-2018-12207 (iTLB Multihit): Not affected notes_plat_sysinfo_1040 = CVE-2018-3620 (L1 Terminal Fault): Not affected notes_plat_sysinfo_1045 = Microarchitectural Data Sampling: Not affected notes_plat_sysinfo_1050 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_1055 = mmio_stale_data: Not affected notes_plat_sysinfo_1060 = retbleed: Not affected notes_plat_sysinfo_1065 = CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store notes_plat_sysinfo_1070 = Bypass disabled via prctl and notes_plat_sysinfo_1075 = seccomp notes_plat_sysinfo_1080 = CVE-2017-5753 (Spectre variant 1): Mitigation: usercopy/swapgs notes_plat_sysinfo_1085 = barriers and __user pointer notes_plat_sysinfo_1090 = sanitization notes_plat_sysinfo_1095 = CVE-2017-5715 (Spectre variant 2): Mitigation: Retpolines, IBPB: notes_plat_sysinfo_1100 = conditional, IBRS_FW, STIBP: notes_plat_sysinfo_1105 = disabled, RSB filling, notes_plat_sysinfo_1110 = PBRSB-eIBRS: Not affected notes_plat_sysinfo_1115 = CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected notes_plat_sysinfo_1120 = CVE-2019-11135 (TSX Asynchronous Abort): Not affected notes_plat_sysinfo_1125 = notes_plat_sysinfo_1130 = run-level 5 Jun 27 18:30 notes_plat_sysinfo_1135 = notes_plat_sysinfo_1140 = SPEC is set to: /home/CPU2017 notes_plat_sysinfo_1145 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1150 = /dev/mapper/ubuntu--vg-ubuntu--lv ext4 437G 23G 396G 6% / notes_plat_sysinfo_1155 = notes_plat_sysinfo_1160 = From /sys/devices/virtual/dmi/id notes_plat_sysinfo_1165 = Vendor: HPE notes_plat_sysinfo_1170 = Product: ProLiant DL385 Gen11 notes_plat_sysinfo_1175 = Product Family: ProLiant notes_plat_sysinfo_1180 = Serial: DL385G11-008 notes_plat_sysinfo_1185 = notes_plat_sysinfo_1190 = Additional information from dmidecode 3.3 follows. WARNING: Use caution when you notes_plat_sysinfo_1195 = interpret this section. The 'dmidecode' program reads system data which is "intended to notes_plat_sysinfo_1200 = allow hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_1205 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_1210 = Memory: notes_plat_sysinfo_1215 = 24x Samsung M321R8GA0BB0-CQKDG 64 GB 2 rank 4800 notes_plat_sysinfo_1220 = notes_plat_sysinfo_1225 = BIOS: notes_plat_sysinfo_1230 = BIOS Vendor: HPE notes_plat_sysinfo_1235 = BIOS Version: 1.12 notes_plat_sysinfo_1240 = BIOS Date: 11/24/2022 notes_plat_sysinfo_1245 = BIOS Revision: 1.12 notes_plat_sysinfo_1250 = Firmware Revision: 1.10 notes_plat_sysinfo_1255 = notes_plat_sysinfo_1260 = (End of data from sysinfo program) hw_cpu_name = AMD EPYC 9554 hw_disk = 437 GB add more disk info here hw_memory001 = 1511.581 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 2 prepared_by = root (is never output, only tags rawfile) sw_file = ext4 sw_os001 = Ubuntu 22.04.1 LTS sw_state = Run level 5 (add definition here) # End of settings added by sysinfo_program 654.roms_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 649.fotonik3d_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 644.nab_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 638.imagick_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 619.lbm_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 607.cactuBSSN_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: power_management000 = BIOS and OS set to prefer performance at power_management001 = the cost of additional power usage notes_plat_000 =BIOS Configuration notes_plat_005 = Workload Profile set to General Peak Frequency Compute notes_plat_010 = Determinism Control set to Manual notes_plat_015 = Performance Determinism set to Power Deterministic notes_plat_020 = AMD SMT Option set to Disabled notes_plat_025 = Last-Level Cache (LLC) as NUMA Node set to Enabled notes_plat_030 = ACPI CST C2 Latency set to 18 microseconds notes_plat_035 = Memory PStates set to Disabled notes_plat_040 = Thermal Configuration set to Maximum Cooling notes_plat_045 = Workload Profile set to Custom notes_plat_050 = Power Regulator set to OS Control Mode notes_plat_055 = notes_plat_060 =The system ROM used for this result contains microcode version 0xa10110e for the notes_plat_065 =AMD EPYC 9nn4X family of processors. The reference code/AGESA version used in this notes_plat_070 =ROM is version GenoaPI 1.0.0.1-L6