# Invocation command line: # /spec2017/bin/harness/runcpu --configfile amd_speed_aocc320_milanx_A1.cfg --tune all --reportable --iterations 3 --nopower --runmode speed --tune base:peak --size test:train:refspeed intspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 320 SPEC CPU2017 V1.1.8 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc320_milanx_A1.cfg # Creation Date : February 11, 2022 # CPU2017 Version : 1.1.8 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 3.2.0 # Operating system version : OpenSUSE 15.2 # Supported OS's : Ubuntu 20.04, RHEL 8.3, SLES 15 SP2 # Hardware : AMD Milan, Rome, (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc320_milanx_A1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU2017 under optimized conditions on AMD Milan-X/Milan/Rome-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Milan-X/Milan/Rome microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc320_milanx_A1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on two socket AMD # Milan-X/Milan/Rome-based servers with 64 cores per socket, SMT enabled and 1 TiB of DDR4 # memory distributed evenly among all 16 channels using 32 GiB DIMMs. # # To run the binary package on other Milan-X/Milan/Rome configurations, please review # "Readme.amd_speed_aocc320_milanx_A1.txt". In general, Milan-X/Milan/Rome CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc320_milanx_A1.cfg" or any # other file besides "ini_amd_speed_aocc320_milanx_A1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 20.04, RHEL 8.3 and SLES 15 SP2. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc320 %define binary_package_name amd_speed_%{compiler_name}_milanx_A %define binary_package_revision 1 # build_path cannot contain SPEC variables or it will trigger rebuilds: %define build_path /sppo/bin/cpu2017v118-aocc32-milanx-speed %define flags_file_name %{compiler_name}-flags-A1.xml # To enable the platform file, be sure to uncomment the flagsurl02 header line # below. %define platform_file_name INVALID_platform_%{binary_package_name}.xml # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc ################################################################################ ################################################################################ # Binary label extension and "allow_build"" switch ################################################################################ # Only modify the binary label extension if you plan to rebuild the binaries. %define ext %{binary_package_name} # If you plan to recompile these CPU2017 binaries, please choose a new extension # name (ext above) to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true below. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. ################################################################################ ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # Necessary to avoid gcc out-of-memory exceptions on certain SUTs: preENV_MALLOC_CONF = retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib %define build_lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib;$[top]/%{lib_dir}/lib32:%{ENV_LD_LIBRARY_PATH} # Define 32-bit library build paths: # Do not use $[top] with the 32-bit libraries because doing so will cause an # options checksum error triggering a xalanc recompile attempt on SUTs having # different file paths. # NOTE: no 32-bit libraries are currently needed with Speed. JEMALLOC_LIB32_PATH = %{build_path}%{build_lib_dir}/lib32 %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc320_milanx_A1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc320_milanx_A1.inc # File generation code date: May 4, 2021 # File generation date/time: May 04, 2022 / 15:51:12 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 128 %define physical_core_count 64 %define physical_core_max 63 %define logical_core_max 127 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from '7573x' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 128 preENV_GOMP_CPU_AFFINITY = 0-127 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 64 ENV_GOMP_CPU_AFFINITY = 0-63 bind0 = numactl --physcpubind=0-63 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 64 ENV_GOMP_CPU_AFFINITY = 0-63 bind0 = numactl --physcpubind=0-63 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 0 bind0 = numactl --physcpubind=0 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 64 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s,627.cam4_s,628.pop2_s,638.imagick_s,649.fotonik3d_s,654.roms_s,657.xz_s=peak: threads = 64 ENV_GOMP_CPU_AFFINITY = 0-63 bind0 = numactl --physcpubind=0-63 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 128 644.nab_s=peak: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9016 tester =ASUSTeK Computer Inc. test_sponsor =ASUSTeK Computer Inc. hw_vendor =ASUSTeK Computer Inc. hw_model000 =ASUS RS720A-E11(KMPP-D32) Server System hw_model001 =2.80 GHz, AMD EPYC 7573X #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 3.2.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Mar-2022 sw_avail =Dec-2021 hw_cpu_name =AMD EPYC 7573X hw_cpu_nominal_mhz =2800 hw_cpu_max_mhz =3600 hw_ncores =64 hw_nthreadspercore =2 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios =Version 0901 released Nov-2021 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =512 KB I+D on chip per core hw_tcache000 =768 MB I+D on chip per chip, 96 MB shared / 4 hw_tcache001 = cores hw_ocache =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 7742 CPU + 1TiB Memory using openSUSE 15.2 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 =OS set to performance mode via cpupower frequency-set -g performance notes_os_015 = notes_os_020 =runcpu command invoked through numactl i.e.: notes_os_025 =numactl --interleave=all runcpu notes_os_030 = notes_os_035 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_040 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_045 =To free node-local memory and avoid remote memory usage, notes_os_050 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_055 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_060 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_065 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_070 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) notes_jemalloc_005 =jemalloc 5.1.0 is available here: notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 notes_jemalloc_015 = sw_other =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = cTDP: 280 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = Package Power: 280 # notes_plat_008 = EDC: 300 # notes_plat_010 = NPS: 1 # notes_plat_014 = 4-link xGMI max speed: 16Gbps # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =64-bit notes_os_thp_015 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 =To enable THP only on request for peak runs of 628.pop2_s: notes_os_thp_004 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled' run as root. notes_os_thp_005 =To disable THP for peak runs of 627.cam4_s, 649.fotonik3d_s, and 654.roms_s, notes_os_thp_006 ='echo never > /sys/kernel/mm/transparent_hugepage/enabled' run as root. notes_os_thp_007 = ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =1 x 240 GB SATA SSD hw_memory =1 TB (16 x 64 GB 4Rx4 PC4-3200AA-L) hw_nchips =2 prepared_by =ASUSTeK Computer Inc. sw_file =xfs sw_os000 =SUSE Linux Enterprise Server 15 SP2 (x86_64) sw_os001 =Kernel 5.3.18-22-default sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/spec2017/config/amd_speed_aocc320_milanx_A1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib;$[top]/%{build_lib_dir}/lib32:%{ENV_LIBRARY_PATH} % define build_ncpus 64 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/ASUSTekPlatform-Settings-AMD-Milan-V1.6.xml flagsurl001 = http://www.spec.org/cpu2017/flags/aocc320-flags-A1.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ ################################################################################ # Default Flags ################################################################################ default: # SPEC CPU flags: EXTRA_LIBS = -fopenmp=libomp -lomp -ljemalloc -lamdlibm -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # AOCC option variables: OPT_ROOT = -march=znver3 $(VECMATHLIB) -ffast-math -fopenmp OPT_ROOT_BASE = -O3 $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast $(OPT_ROOT) -flto ################################################################################ ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks: EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) -flto -fstruct-layout=5 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 -fremap-arrays \ -mllvm -function-specialize -flv-function-specialization \ -mllvm -enable-gvn-hoist \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -Wno-unused-command-line-argument CXXOPTIMIZE = $(OPT_ROOT_BASE) -flto \ -mllvm -enable-partial-unswitch \ -mllvm -unroll-threshold=100 \ -finline-aggressive -flv-function-specialization \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reroll-loops \ -mllvm -aggressive-loop-unswitch \ -mllvm -extra-vectorizer-passes \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -Wno-unused-command-line-argument \ -mllvm -convert-pow-exp-to-int=false FOPTIMIZE = -Hz,1,0x1 $(OPT_ROOT_BASE) -Mrecursive \ -mllvm -fuse-tile-inner-loop -funroll-loops \ -mllvm -extra-vectorizer-passes \ -mllvm -lsr-in-nested-loop \ -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -Wno-unused-command-line-argument \ -mllvm -enable-loopinterchange \ -mllvm -compute-interchange-order LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching \ -Wl,-mllvm -Wl,-enable-licm-vrp #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp -lomp -lamdlibm -ljemalloc -lflang -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = # The following is necessary for 502/602 gcc: LDOPTIMIZE = -z muldefs EXTRA_OPTIMIZE = -DSPEC_OPENMP -fopenmp -Wno-return-type ################################################################################ ######################## # intspeed tuning flags # ######################## intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) -flto EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination -fvisibility=hidden LDCFLAGS = -Wl,-allow-multiple-definition -Wl,-mllvm \ -Wl,-enable-licm-vrp # LDCXXFLAGS is left empty as intspeed CPP bmks have to use VZEROUPPER # instruction which is the default. LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split # Setting submit in base and peak to identical values must be done due to a # quirk in the SPEC CPU harness. Do not try to move this assignment to intspeed # or default. intspeed=base: submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command intspeed=peak: submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ######################## # fpspeed tuning flags # ######################## # Setting submit in base and peak to identical values must be done due to a # quirk in the SPEC CPU harness. Do not try to move this assignment to fpspeed # or default. fpspeed=base: submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command fpspeed=peak: submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=5 \ -mllvm -unroll-threshold=50 -fremap-arrays \ -flv-function-specialization -mllvm \ -inline-threshold=1000 -mllvm -enable-gvn-hoist \ -mllvm -global-vectorize-slp=true -mllvm \ -function-specialize -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -Wno-unused-command-line-argument CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -flv-function-specialization -mllvm -enable-licm-vrp \ -mllvm -reroll-loops -mllvm \ -aggressive-loop-unswitch -mllvm \ -reduce-array-computations=3 -mllvm \ -global-vectorize-slp=true \ -Wno-unused-command-line-argument FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -Wno-unused-command-line-argument EXTRA_CXXFLAGS += -mllvm -do-block-reorder=aggressive EXTRA_LDFLAGS = -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching \ -Wl,-mllvm -Wl,-enable-licm-vrp LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false \ -Wl,-mllvm -Wl,-enable-licm-vrp \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp -lomp -lamdlibm -ljemalloc -lflang -lm EXTRA_OPTIMIZE = -DSPEC_OPENMP -fopenmp -Wno-return-type feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw ######################################### # Benchmark specific peak tuning flags: # ######################################### ################################################################################ 600.perlbench_s=peak: # C submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 602.gcc_s=peak: # C submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 603.bwaves_s=peak: # Fortran FOPTIMIZE = -Ofast $(OPT_ROOT) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -Wno-unused-command-line-argument submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 605.mcf_s=peak: # C submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 607.cactuBSSN_s=peak: # C, C++, Fortran submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 620.omnetpp_s =peak: # C++ submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 621.wrf_s=peak: # Fortran, C FOPTIMIZE = -Hz,1,0x1 $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -fuse-tile-inner-loop -funroll-loops \ -mllvm -extra-vectorizer-passes \ -mllvm -lsr-in-nested-loop \ -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -Wno-unused-command-line-argument \ -mllvm -enable-loopinterchange \ -mllvm -compute-interchange-order LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching \ -Wl,-mllvm -Wl,-enable-licm-vrp submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 623.xalancbmk_s=peak: # C++ EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden EXTRA_LDFLAGS = -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 625.x264_s=peak: # C COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=5 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 -fremap-arrays \ -mllvm -function-specialize -flv-function-specialization \ -mllvm -enable-gvn-hoist \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -Wno-unused-command-line-argument \ -mllvm -do-block-reorder=aggressive EXTRA_LDFLAGS = -Wl,-mllvm -Wl,-do-block-reorder=aggressive \ -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition \ -Wl,-mllvm -Wl,-enable-licm-vrp submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 627.cam4_s=peak: # Fortran, C FOPTIMIZE = -Hz,1,0x1 $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -fuse-tile-inner-loop -funroll-loops \ -mllvm -extra-vectorizer-passes \ -mllvm -lsr-in-nested-loop \ -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -Wno-unused-command-line-argument \ -mllvm -enable-loopinterchange \ -mllvm -compute-interchange-order LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching \ -Wl,-mllvm -Wl,-enable-licm-vrp submit = echo never > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 628.pop2_s=peak: # Fortran90, C FOPTIMIZE = $(OPT_ROOT) -Ofast -Mrecursive \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -Wno-unused-command-line-argument submit = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 631.deepsjeng_s=peak: # C++ CXXOPTIMIZE = $(OPT_ROOT_BASE) -flto \ -mllvm -enable-partial-unswitch \ -mllvm -unroll-threshold=100 \ -finline-aggressive -flv-function-specialization \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reroll-loops \ -mllvm -aggressive-loop-unswitch \ -mllvm -extra-vectorizer-passes \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -Wno-unused-command-line-argument \ -mllvm -convert-pow-exp-to-int=false EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden EXTRA_LDFLAGS = -Wl,-mllvm -Wl,-do-block-reorder=aggressive \ -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 # LDCXXFLAGS is left empty as intspeed CPP bmks have to use VZEROUPPER # instruction which is the default. LDCXXFLAGS = submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 638.imagick_s=peak: # C COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=5 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 -fremap-arrays \ -mllvm -function-specialize -flv-function-specialization \ -mllvm -enable-gvn-hoist \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -Wno-unused-command-line-argument \ -mllvm -do-block-reorder=aggressive EXTRA_LDFLAGS = -Wl,-mllvm -Wl,-do-block-reorder=aggressive \ -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition -Wl,-mllvm \ -Wl,-enable-licm-vrp submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 644.nab_s=peak: # C COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=5 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 -fremap-arrays \ -mllvm -function-specialize -flv-function-specialization \ -mllvm -enable-gvn-hoist \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -Wno-unused-command-line-argument \ -mllvm -do-block-reorder=aggressive EXTRA_LDFLAGS = -Wl,-mllvm -Wl,-do-block-reorder=aggressive \ -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition \ -Wl,-mllvm -Wl,-enable-licm-vrp submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 648.exchange2_s=peak: # Fortran submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 649.fotonik3d_s=peak: # Fortran 95 + OpenMP ENV_PGHPF_ZMEM =yes submit = echo never > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 654.roms_s=peak: # Fortran 2003 FOPTIMIZE = -Ofast $(OPT_ROOT) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -Wno-unused-command-line-argument submit = echo never > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ ################################################################################ 657.xz_s=peak: # C99 COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=5 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 -fremap-arrays \ -mllvm -function-specialize -flv-function-specialization \ -mllvm -enable-gvn-hoist \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -Wno-unused-command-line-argument \ -mllvm -do-block-reorder=aggressive EXTRA_LDFLAGS = -Wl,-mllvm -Wl,-do-block-reorder=aggressive \ -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition \ -Wl,-mllvm -Wl,-enable-licm-vrp ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ################################################################################ # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:679c83684f6f4fc369a093999b6661d0a378911de2a006d3245423ad80d3fb9a) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /spec2017/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d notes_plat_sysinfo_015 = running on localhost Wed May 4 15:51:25 2022 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = For more information on this section, see notes_plat_sysinfo_035 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : AMD EPYC 7573X 32-Core Processor notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 128 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_070 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_075 = cpu cores : 32 notes_plat_sysinfo_080 = siblings : 64 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 notes_plat_sysinfo_090 = 25 26 27 28 29 30 31 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 notes_plat_sysinfo_100 = 25 26 27 28 29 30 31 notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From lscpu from util-linux 2.33.1: notes_plat_sysinfo_115 = Architecture: x86_64 notes_plat_sysinfo_120 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_125 = Byte Order: Little Endian notes_plat_sysinfo_130 = Address sizes: 48 bits physical, 48 bits virtual notes_plat_sysinfo_135 = CPU(s): 128 notes_plat_sysinfo_140 = On-line CPU(s) list: 0-127 notes_plat_sysinfo_145 = Thread(s) per core: 2 notes_plat_sysinfo_150 = Core(s) per socket: 32 notes_plat_sysinfo_155 = Socket(s): 2 notes_plat_sysinfo_160 = NUMA node(s): 4 notes_plat_sysinfo_165 = Vendor ID: AuthenticAMD notes_plat_sysinfo_170 = CPU family: 25 notes_plat_sysinfo_175 = Model: 1 notes_plat_sysinfo_180 = Model name: AMD EPYC 7573X 32-Core Processor notes_plat_sysinfo_185 = Stepping: 2 notes_plat_sysinfo_190 = CPU MHz: 2104.626 notes_plat_sysinfo_195 = CPU max MHz: 2800.0000 notes_plat_sysinfo_200 = CPU min MHz: 1500.0000 notes_plat_sysinfo_205 = BogoMIPS: 5589.43 notes_plat_sysinfo_210 = Virtualization: AMD-V notes_plat_sysinfo_215 = L1d cache: 32K notes_plat_sysinfo_220 = L1i cache: 32K notes_plat_sysinfo_225 = L2 cache: 512K notes_plat_sysinfo_230 = L3 cache: 98304K notes_plat_sysinfo_235 = NUMA node0 CPU(s): 0-15,64-79 notes_plat_sysinfo_240 = NUMA node1 CPU(s): 16-31,80-95 notes_plat_sysinfo_245 = NUMA node2 CPU(s): 32-47,96-111 notes_plat_sysinfo_250 = NUMA node3 CPU(s): 48-63,112-127 notes_plat_sysinfo_255 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_260 = pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_265 = constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq notes_plat_sysinfo_270 = monitor ssse3 fma cx16 pcid sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand notes_plat_sysinfo_275 = lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw notes_plat_sysinfo_280 = ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb notes_plat_sysinfo_285 = cat_l3 cdp_l3 invpcid_single hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase notes_plat_sysinfo_290 = bmi1 avx2 smep bmi2 invpcid cqm rdt_a rdseed adx smap clflushopt clwb sha_ni notes_plat_sysinfo_295 = xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_300 = clzero irperf xsaveerptr wbnoinvd arat npt lbrv svm_lock nrip_save tsc_scale notes_plat_sysinfo_305 = vmcb_clean flushbyasid decodeassists pausefilter pfthreshold v_vmsave_vmload vgif notes_plat_sysinfo_310 = umip pku ospke vaes vpclmulqdq rdpid overflow_recov succor smca notes_plat_sysinfo_315 = notes_plat_sysinfo_320 = /proc/cpuinfo cache data notes_plat_sysinfo_325 = cache size : 512 KB notes_plat_sysinfo_330 = notes_plat_sysinfo_335 = From numactl --hardware notes_plat_sysinfo_340 = WARNING: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_345 = available: 4 nodes (0-3) notes_plat_sysinfo_350 = node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 64 65 66 67 68 69 70 71 72 73 74 75 notes_plat_sysinfo_355 = 76 77 78 79 notes_plat_sysinfo_360 = node 0 size: 257840 MB notes_plat_sysinfo_365 = node 0 free: 257227 MB notes_plat_sysinfo_370 = node 1 cpus: 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 80 81 82 83 84 85 86 87 88 notes_plat_sysinfo_375 = 89 90 91 92 93 94 95 notes_plat_sysinfo_380 = node 1 size: 258026 MB notes_plat_sysinfo_385 = node 1 free: 257417 MB notes_plat_sysinfo_390 = node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 96 97 98 99 100 101 102 notes_plat_sysinfo_395 = 103 104 105 106 107 108 109 110 111 notes_plat_sysinfo_400 = node 2 size: 258004 MB notes_plat_sysinfo_405 = node 2 free: 257644 MB notes_plat_sysinfo_410 = node 3 cpus: 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 112 113 114 115 116 117 notes_plat_sysinfo_415 = 118 119 120 121 122 123 124 125 126 127 notes_plat_sysinfo_420 = node 3 size: 258036 MB notes_plat_sysinfo_425 = node 3 free: 257707 MB notes_plat_sysinfo_430 = node distances: notes_plat_sysinfo_435 = node 0 1 2 3 notes_plat_sysinfo_440 = 0: 10 12 32 32 notes_plat_sysinfo_445 = 1: 12 10 32 32 notes_plat_sysinfo_450 = 2: 32 32 10 12 notes_plat_sysinfo_455 = 3: 32 32 12 10 notes_plat_sysinfo_460 = notes_plat_sysinfo_465 = From /proc/meminfo notes_plat_sysinfo_470 = MemTotal: 1056674084 kB notes_plat_sysinfo_475 = HugePages_Total: 0 notes_plat_sysinfo_480 = Hugepagesize: 2048 kB notes_plat_sysinfo_485 = notes_plat_sysinfo_490 = /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has notes_plat_sysinfo_495 = performance notes_plat_sysinfo_500 = notes_plat_sysinfo_505 = From /etc/*release* /etc/*version* notes_plat_sysinfo_510 = os-release: notes_plat_sysinfo_515 = NAME="SLES" notes_plat_sysinfo_520 = VERSION="15-SP2" notes_plat_sysinfo_525 = VERSION_ID="15.2" notes_plat_sysinfo_530 = PRETTY_NAME="SUSE Linux Enterprise Server 15 SP2" notes_plat_sysinfo_535 = ID="sles" notes_plat_sysinfo_540 = ID_LIKE="suse" notes_plat_sysinfo_545 = ANSI_COLOR="0;32" notes_plat_sysinfo_550 = CPE_NAME="cpe:/o:suse:sles:15:sp2" notes_plat_sysinfo_555 = notes_plat_sysinfo_560 = uname -a: notes_plat_sysinfo_565 = Linux localhost 5.3.18-22-default #1 SMP Wed Jun 3 12:16:43 UTC 2020 (720aeba) x86_64 notes_plat_sysinfo_570 = x86_64 x86_64 GNU/Linux notes_plat_sysinfo_575 = notes_plat_sysinfo_580 = Kernel self-reported vulnerability status: notes_plat_sysinfo_585 = notes_plat_sysinfo_590 = CVE-2018-12207 (iTLB Multihit): Not affected notes_plat_sysinfo_595 = CVE-2018-3620 (L1 Terminal Fault): Not affected notes_plat_sysinfo_600 = Microarchitectural Data Sampling: Not affected notes_plat_sysinfo_605 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_610 = CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store notes_plat_sysinfo_615 = Bypass disabled via prctl and notes_plat_sysinfo_620 = seccomp notes_plat_sysinfo_625 = CVE-2017-5753 (Spectre variant 1): Mitigation: usercopy/swapgs notes_plat_sysinfo_630 = barriers and __user pointer notes_plat_sysinfo_635 = sanitization notes_plat_sysinfo_640 = CVE-2017-5715 (Spectre variant 2): Mitigation: Full AMD retpoline, notes_plat_sysinfo_645 = IBPB: conditional, IBRS_FW, STIBP: notes_plat_sysinfo_650 = always-on, RSB filling notes_plat_sysinfo_655 = CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected notes_plat_sysinfo_660 = CVE-2019-11135 (TSX Asynchronous Abort): Not affected notes_plat_sysinfo_665 = notes_plat_sysinfo_670 = run-level 3 May 4 15:50 notes_plat_sysinfo_675 = notes_plat_sysinfo_680 = SPEC is set to: /spec2017 notes_plat_sysinfo_685 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_690 = /dev/sda4 xfs 199G 56G 144G 29% / notes_plat_sysinfo_695 = notes_plat_sysinfo_700 = From /sys/devices/virtual/dmi/id notes_plat_sysinfo_705 = Vendor: ASUSTeK COMPUTER INC. notes_plat_sysinfo_710 = Product: RS720A-E11-RS12E notes_plat_sysinfo_715 = Product Family: Server notes_plat_sysinfo_720 = Serial: 123456789012 notes_plat_sysinfo_725 = notes_plat_sysinfo_730 = Additional information from dmidecode 3.2 follows. WARNING: Use caution when you notes_plat_sysinfo_735 = interpret this section. The 'dmidecode' program reads system data which is "intended to notes_plat_sysinfo_740 = allow hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_745 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_750 = Memory: notes_plat_sysinfo_755 = 16x Samsung M386A8K40DM2-CWE 64 GB 4 rank 3200 notes_plat_sysinfo_760 = 16x Unknown Unknown notes_plat_sysinfo_765 = notes_plat_sysinfo_770 = BIOS: notes_plat_sysinfo_775 = BIOS Vendor: American Megatrends Inc. notes_plat_sysinfo_780 = BIOS Version: 0901 notes_plat_sysinfo_785 = BIOS Date: 11/23/2021 notes_plat_sysinfo_790 = BIOS Revision: 9.1 notes_plat_sysinfo_795 = notes_plat_sysinfo_800 = (End of data from sysinfo program) hw_cpu_name = AMD EPYC 7573X hw_disk = 199 GB add more disk info here hw_memory001 = 1007.723 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 2 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os001 = NAME="SLES" sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program 657.xz_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 641.leela_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: power_management000 = BIOS and OS set to prefer performance power_management001 = at the cost of additional power usage. notes_plat_000 =BIOS Configuration: notes_plat_005 =DLWM Support = Disabled notes_plat_010 =SVM Mode = Disabled notes_plat_015 =NUMA nodes per socket = NPS2 notes_plat_020 =APBDIS = 1 notes_plat_025 =Fix SOC P-state = P0 notes_plat_030 =Engine Boost = Enabled