source: GPL/trunk/include/linux/interrupt.h@ 596

Last change on this file since 596 was 441, checked in by Paul Smedley, 16 years ago

Move functions out of config.h into appropriate linux header
File size: 4.6 KB
Line 
1/* interrupt.h */
2#ifndef _LINUX_INTERRUPT_H
3#define _LINUX_INTERRUPT_H
4
5#include <linux/kernel.h>
6//#include <asm/bitops.h>
7#include <asm/atomic.h>
8
9/*
10 * For 2.4.x compatibility, 2.4.x can use
11 *
12 * typedef void irqreturn_t;
13 * #define IRQ_NONE
14 * #define IRQ_HANDLED
15 * #define IRQ_RETVAL(x)
16 *
17 * To mix old-style and new-style irq handler returns.
18 *
19 * IRQ_NONE means we didn't handle it.
20 * IRQ_HANDLED means that we did have a valid interrupt and handled it.
21 * IRQ_RETVAL(x) selects on the two depending on x being non-zero (for handled)
22 */
23typedef int irqreturn_t;
24
25#define IRQ_NONE (0)
26#define IRQ_HANDLED (1)
27#define IRQ_RETVAL(x) ((x) != 0)
28
29#include <linux/signal.h>
30#define IRQF_SHARED SA_SHIRQ
31#define IRQF_DISABLED SA_INTERRUPT
32#define IRQF_SAMPLE_RANDOM SA_SAMPLE_RANDOM
33#define IRQF_PERCPU SA_PERCPU
34#ifdef SA_PROBEIRQ
35#define IRQF_PROBE_SHARED SA_PROBEIRQ
36#else
37#define IRQF_PROBE_SHARED 0 /* dummy */
38#endif
39
40struct irqaction {
41 void (*handler)(int, void *, struct pt_regs *);
42 unsigned long flags;
43 unsigned long mask;
44 const char *name;
45 void *dev_id;
46 struct irqaction *next;
47};
48
49extern volatile unsigned char bh_running;
50
51extern atomic_t bh_mask_count[32];
52extern unsigned long bh_active;
53extern unsigned long bh_mask;
54extern void (*bh_base[32])(void);
55
56void do_bottom_half(void);
57
58/* Who gets which entry in bh_base. Things which will occur most often
59 should come first - in which case NET should be up the top with SERIAL/TQUEUE! */
60
61enum {
62 TIMER_BH = 0,
63 CONSOLE_BH,
64 TQUEUE_BH,
65 DIGI_BH,
66 SERIAL_BH,
67 RISCOM8_BH,
68 SPECIALIX_BH,
69 AURORA_BH,
70 ESP_BH,
71 NET_BH,
72 SCSI_BH,
73 IMMEDIATE_BH,
74 KEYBOARD_BH,
75 CYCLADES_BH,
76 CM206_BH,
77 JS_BH,
78 MACSERIAL_BH,
79 ISICOM_BH
80};
81/* Tasklets --- multithreaded analogue of BHs.
82
83 Main feature differing them of generic softirqs: tasklet
84 is running only on one CPU simultaneously.
85
86 Main feature differing them of BHs: different tasklets
87 may be run simultaneously on different CPUs.
88
89 Properties:
90 * If tasklet_schedule() is called, then tasklet is guaranteed
91 to be executed on some cpu at least once after this.
92 * If the tasklet is already scheduled, but its excecution is still not
93 started, it will be executed only once.
94 * If this tasklet is already running on another CPU (or schedule is called
95 from tasklet itself), it is rescheduled for later.
96 * Tasklet is strictly serialized wrt itself, but not
97 wrt another tasklets. If client needs some intertask synchronization,
98 he makes it with spinlocks.
99 */
100
101struct tasklet_struct {
102 struct tasklet_struct *next; /* linked list of active bh's */
103 unsigned long sync; /* must be initialized to zero */
104 void (*func)(void *); /* function to call */
105 void *data; /* argument to function */
106};
107
108extern void tasklet_hi_schedule(struct tasklet_struct *t);
109
110#define tasklet_schedule tasklet_hi_schedule
111
112extern void tasklet_init(struct tasklet_struct *t,
113 void (*func)(unsigned long), unsigned long data);
114
115/*
116 * Autoprobing for irqs:
117 *
118 * probe_irq_on() and probe_irq_off() provide robust primitives
119 * for accurate IRQ probing during kernel initialization. They are
120 * reasonably simple to use, are not "fooled" by spurious interrupts,
121 * and, unlike other attempts at IRQ probing, they do not get hung on
122 * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
123 *
124 * For reasonably foolproof probing, use them as follows:
125 *
126 * 1. clear and/or mask the device's internal interrupt.
127 * 2. sti();
128 * 3. irqs = probe_irq_on(); // "take over" all unassigned idle IRQs
129 * 4. enable the device and cause it to trigger an interrupt.
130 * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
131 * 6. irq = probe_irq_off(irqs); // get IRQ number, 0=none, negative=multiple
132 * 7. service the device to clear its pending interrupt.
133 * 8. loop again if paranoia is required.
134 *
135 * probe_irq_on() returns a mask of allocated irq's.
136 *
137 * probe_irq_off() takes the mask as a parameter,
138 * and returns the irq number which occurred,
139 * or zero if none occurred, or a negative irq number
140 * if more than one irq occurred.
141 */
142extern unsigned long probe_irq_on(void); /* returns 0 on failure */
143extern int probe_irq_off(unsigned long); /* returns 0 or negative on failure */
144
145typedef irqreturn_t (*snd_irq_handler_t)(int, void *);
146#define irq_handler_t snd_irq_handler_t
147#undef irq_handler_t
148#define irq_handler_t snd_irq_handler_t
149
150int request_irq(unsigned int, irq_handler_t handler,
151 unsigned long, const char *, void *);
152
153#endif
Note: See TracBrowser for help on using the repository browser.