source: GPL/trunk/alsa-kernel/isa/sscape.c@ 587

Last change on this file since 587 was 587, checked in by David Azarewicz, 9 years ago

Rearrange directory structure
rework makefiles
cleanup files
File size: 32.8 KB
Line 
1/*
2 * Low-level ALSA driver for the ENSONIQ SoundScape
3 * Copyright (c) by Chris Rankin
4 *
5 * This driver was written in part using information obtained from
6 * the OSS/Free SoundScape driver, written by Hannu Savolainen.
7 *
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24#include <linux/init.h>
25#include <linux/err.h>
26#include <linux/isa.h>
27#include <linux/delay.h>
28#include <linux/firmware.h>
29#include <linux/pnp.h>
30#include <linux/spinlock.h>
31#include <linux/module.h>
32#include <asm/dma.h>
33#include <sound/core.h>
34#include <sound/wss.h>
35#include <sound/mpu401.h>
36#include <sound/initval.h>
37
38
39MODULE_AUTHOR("Chris Rankin");
40MODULE_DESCRIPTION("ENSONIQ SoundScape driver");
41MODULE_LICENSE("GPL");
42MODULE_FIRMWARE("sndscape.co0");
43MODULE_FIRMWARE("sndscape.co1");
44MODULE_FIRMWARE("sndscape.co2");
45MODULE_FIRMWARE("sndscape.co3");
46MODULE_FIRMWARE("sndscape.co4");
47MODULE_FIRMWARE("scope.cod");
48
49static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
50static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
51static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
52static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
53static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
54static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
55static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
56static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
57static bool joystick[SNDRV_CARDS];
58
59module_param_array(index, int, NULL, 0444);
60MODULE_PARM_DESC(index, "Index number for SoundScape soundcard");
61
62module_param_array(id, charp, NULL, 0444);
63MODULE_PARM_DESC(id, "Description for SoundScape card");
64
65module_param_array(port, long, NULL, 0444);
66MODULE_PARM_DESC(port, "Port # for SoundScape driver.");
67
68module_param_array(wss_port, long, NULL, 0444);
69MODULE_PARM_DESC(wss_port, "WSS Port # for SoundScape driver.");
70
71module_param_array(irq, int, NULL, 0444);
72MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver.");
73
74module_param_array(mpu_irq, int, NULL, 0444);
75MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver.");
76
77module_param_array(dma, int, NULL, 0444);
78MODULE_PARM_DESC(dma, "DMA # for SoundScape driver.");
79
80module_param_array(dma2, int, NULL, 0444);
81MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver.");
82
83module_param_array(joystick, bool, NULL, 0444);
84MODULE_PARM_DESC(joystick, "Enable gameport.");
85
86#ifdef CONFIG_PNP
87static int isa_registered;
88static int pnp_registered;
89
90static struct pnp_card_device_id sscape_pnpids[] = {
91 { .id = "ENS3081", .devs = { { "ENS0000" } } }, /* Soundscape PnP */
92 { .id = "ENS4081", .devs = { { "ENS1011" } } }, /* VIVO90 */
93 { .id = "" } /* end */
94};
95
96MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids);
97#endif
98
99
100#define HOST_CTRL_IO(i) ((i) + 2)
101#define HOST_DATA_IO(i) ((i) + 3)
102#define ODIE_ADDR_IO(i) ((i) + 4)
103#define ODIE_DATA_IO(i) ((i) + 5)
104#define CODEC_IO(i) ((i) + 8)
105
106#define IC_ODIE 1
107#define IC_OPUS 2
108
109#define RX_READY 0x01
110#define TX_READY 0x02
111
112#define CMD_ACK 0x80
113#define CMD_SET_MIDI_VOL 0x84
114#define CMD_GET_MIDI_VOL 0x85
115#define CMD_XXX_MIDI_VOL 0x86
116#define CMD_SET_EXTMIDI 0x8a
117#define CMD_GET_EXTMIDI 0x8b
118#define CMD_SET_MT32 0x8c
119#define CMD_GET_MT32 0x8d
120
121enum GA_REG {
122 GA_INTSTAT_REG = 0,
123 GA_INTENA_REG,
124 GA_DMAA_REG,
125 GA_DMAB_REG,
126 GA_INTCFG_REG,
127 GA_DMACFG_REG,
128 GA_CDCFG_REG,
129 GA_SMCFGA_REG,
130 GA_SMCFGB_REG,
131 GA_HMCTL_REG
132};
133
134#define DMA_8BIT 0x80
135
136
137enum card_type {
138 MEDIA_FX, /* Sequoia S-1000 */
139 SSCAPE, /* Sequoia S-2000 */
140 SSCAPE_PNP,
141 SSCAPE_VIVO,
142};
143
144struct soundscape {
145 spinlock_t lock;
146 unsigned io_base;
147 int ic_type;
148 enum card_type type;
149 struct resource *io_res;
150 struct resource *wss_res;
151 struct snd_wss *chip;
152
153 unsigned char midi_vol;
154};
155
156#define INVALID_IRQ ((unsigned)-1)
157
158
159static inline struct soundscape *get_card_soundscape(struct snd_card *c)
160{
161 return (struct soundscape *) (c->private_data);
162}
163
164/*
165 * Allocates some kernel memory that we can use for DMA.
166 * I think this means that the memory has to map to
167 * contiguous pages of physical memory.
168 */
169static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf,
170 unsigned long size)
171{
172 if (buf) {
173 if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV,
174 snd_dma_isa_data(),
175 size, buf) < 0) {
176 snd_printk(KERN_ERR "sscape: Failed to allocate "
177 "%lu bytes for DMA\n",
178 size);
179 return NULL;
180 }
181 }
182
183 return buf;
184}
185
186/*
187 * Release the DMA-able kernel memory ...
188 */
189static void free_dmabuf(struct snd_dma_buffer *buf)
190{
191 if (buf && buf->area)
192 snd_dma_free_pages(buf);
193}
194
195/*
196 * This function writes to the SoundScape's control registers,
197 * but doesn't do any locking. It's up to the caller to do that.
198 * This is why this function is "unsafe" ...
199 */
200static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg,
201 unsigned char val)
202{
203 outb(reg, ODIE_ADDR_IO(io_base));
204 outb(val, ODIE_DATA_IO(io_base));
205}
206
207/*
208 * Write to the SoundScape's control registers, and do the
209 * necessary locking ...
210 */
211static void sscape_write(struct soundscape *s, enum GA_REG reg,
212 unsigned char val)
213{
214 unsigned long flags;
215
216 spin_lock_irqsave(&s->lock, flags);
217 sscape_write_unsafe(s->io_base, reg, val);
218 spin_unlock_irqrestore(&s->lock, flags);
219}
220
221/*
222 * Read from the SoundScape's control registers, but leave any
223 * locking to the caller. This is why the function is "unsafe" ...
224 */
225static inline unsigned char sscape_read_unsafe(unsigned io_base,
226 enum GA_REG reg)
227{
228 outb(reg, ODIE_ADDR_IO(io_base));
229 return inb(ODIE_DATA_IO(io_base));
230}
231
232/*
233 * Puts the SoundScape into "host" mode, as compared to "MIDI" mode
234 */
235static inline void set_host_mode_unsafe(unsigned io_base)
236{
237 outb(0x0, HOST_CTRL_IO(io_base));
238}
239
240/*
241 * Puts the SoundScape into "MIDI" mode, as compared to "host" mode
242 */
243static inline void set_midi_mode_unsafe(unsigned io_base)
244{
245 outb(0x3, HOST_CTRL_IO(io_base));
246}
247
248/*
249 * Read the SoundScape's host-mode control register, but leave
250 * any locking issues to the caller ...
251 */
252static inline int host_read_unsafe(unsigned io_base)
253{
254 int data = -1;
255 if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0)
256 data = inb(HOST_DATA_IO(io_base));
257
258 return data;
259}
260
261/*
262 * Read the SoundScape's host-mode control register, performing
263 * a limited amount of busy-waiting if the register isn't ready.
264 * Also leaves all locking-issues to the caller ...
265 */
266static int host_read_ctrl_unsafe(unsigned io_base, unsigned timeout)
267{
268 int data;
269
270 while (((data = host_read_unsafe(io_base)) < 0) && (timeout != 0)) {
271 udelay(100);
272 --timeout;
273 } /* while */
274
275 return data;
276}
277
278/*
279 * Write to the SoundScape's host-mode control registers, but
280 * leave any locking issues to the caller ...
281 */
282static inline int host_write_unsafe(unsigned io_base, unsigned char data)
283{
284 if ((inb(HOST_CTRL_IO(io_base)) & TX_READY) != 0) {
285 outb(data, HOST_DATA_IO(io_base));
286 return 1;
287 }
288
289 return 0;
290}
291
292/*
293 * Write to the SoundScape's host-mode control registers, performing
294 * a limited amount of busy-waiting if the register isn't ready.
295 * Also leaves all locking-issues to the caller ...
296 */
297static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data,
298 unsigned timeout)
299{
300 int err;
301
302 while (!(err = host_write_unsafe(io_base, data)) && (timeout != 0)) {
303 udelay(100);
304 --timeout;
305 } /* while */
306
307 return err;
308}
309
310
311/*
312 * Check that the MIDI subsystem is operational. If it isn't,
313 * then we will hang the computer if we try to use it ...
314 *
315 * NOTE: This check is based upon observation, not documentation.
316 */
317static inline int verify_mpu401(const struct snd_mpu401 *mpu)
318{
319 return ((inb(MPU401C(mpu)) & 0xc0) == 0x80);
320}
321
322/*
323 * This is apparently the standard way to initailise an MPU-401
324 */
325static inline void initialise_mpu401(const struct snd_mpu401 *mpu)
326{
327 outb(0, MPU401D(mpu));
328}
329
330/*
331 * Tell the SoundScape to activate the AD1845 chip (I think).
332 * The AD1845 detection fails if we *don't* do this, so I
333 * think that this is a good idea ...
334 */
335static void activate_ad1845_unsafe(unsigned io_base)
336{
337 unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG);
338 sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10);
339 sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80);
340}
341
342/*
343 * Do the necessary ALSA-level cleanup to deallocate our driver ...
344 */
345static void soundscape_free(struct snd_card *c)
346{
347 struct soundscape *sscape = get_card_soundscape(c);
348 release_and_free_resource(sscape->io_res);
349 release_and_free_resource(sscape->wss_res);
350 free_dma(sscape->chip->dma1);
351}
352
353/*
354 * Tell the SoundScape to begin a DMA tranfer using the given channel.
355 * All locking issues are left to the caller.
356 */
357static void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
358{
359 sscape_write_unsafe(io_base, reg,
360 sscape_read_unsafe(io_base, reg) | 0x01);
361 sscape_write_unsafe(io_base, reg,
362 sscape_read_unsafe(io_base, reg) & 0xfe);
363}
364
365/*
366 * Wait for a DMA transfer to complete. This is a "limited busy-wait",
367 * and all locking issues are left to the caller.
368 */
369static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg,
370 unsigned timeout)
371{
372 while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) {
373 udelay(100);
374 --timeout;
375 } /* while */
376
377 return sscape_read_unsafe(io_base, reg) & 0x01;
378}
379
380/*
381 * Wait for the On-Board Processor to return its start-up
382 * acknowledgement sequence. This wait is too long for
383 * us to perform "busy-waiting", and so we must sleep.
384 * This in turn means that we must not be holding any
385 * spinlocks when we call this function.
386 */
387static int obp_startup_ack(struct soundscape *s, unsigned timeout)
388{
389 unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
390
391 do {
392 unsigned long flags;
393 int x;
394
395 spin_lock_irqsave(&s->lock, flags);
396 x = host_read_unsafe(s->io_base);
397 spin_unlock_irqrestore(&s->lock, flags);
398 if (x == 0xfe || x == 0xff)
399 return 1;
400
401 msleep(10);
402 } while (time_before(jiffies, end_time));
403
404 return 0;
405}
406
407/*
408 * Wait for the host to return its start-up acknowledgement
409 * sequence. This wait is too long for us to perform
410 * "busy-waiting", and so we must sleep. This in turn means
411 * that we must not be holding any spinlocks when we call
412 * this function.
413 */
414static int host_startup_ack(struct soundscape *s, unsigned timeout)
415{
416 unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
417
418 do {
419 unsigned long flags;
420 int x;
421
422 spin_lock_irqsave(&s->lock, flags);
423 x = host_read_unsafe(s->io_base);
424 spin_unlock_irqrestore(&s->lock, flags);
425 if (x == 0xfe)
426 return 1;
427
428 msleep(10);
429 } while (time_before(jiffies, end_time));
430
431 return 0;
432}
433
434/*
435 * Upload a byte-stream into the SoundScape using DMA channel A.
436 */
437static int upload_dma_data(struct soundscape *s, const unsigned char *data,
438 size_t size)
439{
440 unsigned long flags;
441 struct snd_dma_buffer dma;
442 int ret;
443 unsigned char val;
444
445 if (!get_dmabuf(&dma, PAGE_ALIGN(32 * 1024)))
446 return -ENOMEM;
447
448 spin_lock_irqsave(&s->lock, flags);
449
450 /*
451 * Reset the board ...
452 */
453 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
454 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f);
455
456 /*
457 * Enable the DMA channels and configure them ...
458 */
459 val = (s->chip->dma1 << 4) | DMA_8BIT;
460 sscape_write_unsafe(s->io_base, GA_DMAA_REG, val);
461 sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20);
462
463 /*
464 * Take the board out of reset ...
465 */
466 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
467 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80);
468
469 /*
470 * Upload the firmware to the SoundScape
471 * board through the DMA channel ...
472 */
473 while (size != 0) {
474 unsigned long len;
475
476 len = min(size, dma.bytes);
477 memcpy(dma.area, data, len);
478 data += len;
479 size -= len;
480
481 snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE);
482 sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG);
483 if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) {
484 /*
485 * Don't forget to release this spinlock we're holding
486 */
487 spin_unlock_irqrestore(&s->lock, flags);
488
489 snd_printk(KERN_ERR
490 "sscape: DMA upload has timed out\n");
491 ret = -EAGAIN;
492 goto _release_dma;
493 }
494 } /* while */
495
496 set_host_mode_unsafe(s->io_base);
497 outb(0x0, s->io_base);
498
499 /*
500 * Boot the board ... (I think)
501 */
502 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
503 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40);
504 spin_unlock_irqrestore(&s->lock, flags);
505
506 /*
507 * If all has gone well, then the board should acknowledge
508 * the new upload and tell us that it has rebooted OK. We
509 * give it 5 seconds (max) ...
510 */
511 ret = 0;
512 if (!obp_startup_ack(s, 5000)) {
513 snd_printk(KERN_ERR "sscape: No response "
514 "from on-board processor after upload\n");
515 ret = -EAGAIN;
516 } else if (!host_startup_ack(s, 5000)) {
517 snd_printk(KERN_ERR
518 "sscape: SoundScape failed to initialise\n");
519 ret = -EAGAIN;
520 }
521
522_release_dma:
523 /*
524 * NOTE!!! We are NOT holding any spinlocks at this point !!!
525 */
526 sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_OPUS ? 0x40 : 0x70));
527 free_dmabuf(&dma);
528
529 return ret;
530}
531
532/*
533 * Upload the bootblock(?) into the SoundScape. The only
534 * purpose of this block of code seems to be to tell
535 * us which version of the microcode we should be using.
536 */
537static int sscape_upload_bootblock(struct snd_card *card)
538{
539 struct soundscape *sscape = get_card_soundscape(card);
540 unsigned long flags;
541 const struct firmware *init_fw = NULL;
542 int data = 0;
543 int ret;
544
545 ret = request_firmware(&init_fw, "scope.cod", card->dev);
546 if (ret < 0) {
547 snd_printk(KERN_ERR "sscape: Error loading scope.cod");
548 return ret;
549 }
550 ret = upload_dma_data(sscape, init_fw->data, init_fw->size);
551
552 release_firmware(init_fw);
553
554 spin_lock_irqsave(&sscape->lock, flags);
555 if (ret == 0)
556 data = host_read_ctrl_unsafe(sscape->io_base, 100);
557
558 if (data & 0x10)
559 sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2f);
560
561 spin_unlock_irqrestore(&sscape->lock, flags);
562
563 data &= 0xf;
564 if (ret == 0 && data > 7) {
565 snd_printk(KERN_ERR
566 "sscape: timeout reading firmware version\n");
567 ret = -EAGAIN;
568 }
569
570 return (ret == 0) ? data : ret;
571}
572
573/*
574 * Upload the microcode into the SoundScape.
575 */
576static int sscape_upload_microcode(struct snd_card *card, int version)
577{
578 struct soundscape *sscape = get_card_soundscape(card);
579 const struct firmware *init_fw = NULL;
580 char name[14];
581 int err;
582
583 snprintf(name, sizeof(name), "sndscape.co%d", version);
584
585 err = request_firmware(&init_fw, name, card->dev);
586 if (err < 0) {
587 snd_printk(KERN_ERR "sscape: Error loading sndscape.co%d",
588 version);
589 return err;
590 }
591 err = upload_dma_data(sscape, init_fw->data, init_fw->size);
592 if (err == 0)
593 snd_printk(KERN_INFO "sscape: MIDI firmware loaded %d KBs\n",
594 init_fw->size >> 10);
595
596 release_firmware(init_fw);
597
598 return err;
599}
600
601/*
602 * Mixer control for the SoundScape's MIDI device.
603 */
604static int sscape_midi_info(struct snd_kcontrol *ctl,
605 struct snd_ctl_elem_info *uinfo)
606{
607 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
608 uinfo->count = 1;
609 uinfo->value.integer.min = 0;
610 uinfo->value.integer.max = 127;
611 return 0;
612}
613
614static int sscape_midi_get(struct snd_kcontrol *kctl,
615 struct snd_ctl_elem_value *uctl)
616{
617 struct snd_wss *chip = snd_kcontrol_chip(kctl);
618 struct snd_card *card = chip->card;
619 register struct soundscape *s = get_card_soundscape(card);
620 unsigned long flags;
621
622 spin_lock_irqsave(&s->lock, flags);
623 uctl->value.integer.value[0] = s->midi_vol;
624 spin_unlock_irqrestore(&s->lock, flags);
625 return 0;
626}
627
628static int sscape_midi_put(struct snd_kcontrol *kctl,
629 struct snd_ctl_elem_value *uctl)
630{
631 struct snd_wss *chip = snd_kcontrol_chip(kctl);
632 struct snd_card *card = chip->card;
633 struct soundscape *s = get_card_soundscape(card);
634 unsigned long flags;
635 int change;
636 unsigned char new_val;
637
638 spin_lock_irqsave(&s->lock, flags);
639
640 new_val = uctl->value.integer.value[0] & 127;
641 /*
642 * We need to put the board into HOST mode before we
643 * can send any volume-changing HOST commands ...
644 */
645 set_host_mode_unsafe(s->io_base);
646
647 /*
648 * To successfully change the MIDI volume setting, you seem to
649 * have to write a volume command, write the new volume value,
650 * and then perform another volume-related command. Perhaps the
651 * first command is an "open" and the second command is a "close"?
652 */
653 if (s->midi_vol == new_val) {
654 change = 0;
655 goto __skip_change;
656 }
657 change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
658 && host_write_ctrl_unsafe(s->io_base, new_val, 100)
659 && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)
660 && host_write_ctrl_unsafe(s->io_base, new_val, 100);
661 s->midi_vol = new_val;
662__skip_change:
663
664 /*
665 * Take the board out of HOST mode and back into MIDI mode ...
666 */
667 set_midi_mode_unsafe(s->io_base);
668
669 spin_unlock_irqrestore(&s->lock, flags);
670 return change;
671}
672
673static struct snd_kcontrol_new midi_mixer_ctl = {
674 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
675 .name = "MIDI",
676 .info = sscape_midi_info,
677 .get = sscape_midi_get,
678 .put = sscape_midi_put
679};
680
681/*
682 * The SoundScape can use two IRQs from a possible set of four.
683 * These IRQs are encoded as bit patterns so that they can be
684 * written to the control registers.
685 */
686static unsigned __devinit get_irq_config(int sscape_type, int irq)
687{
688 static const int valid_irq[] = { 9, 5, 7, 10 };
689 static const int old_irq[] = { 9, 7, 5, 15 };
690 unsigned cfg;
691
692 if (sscape_type == MEDIA_FX) {
693 for (cfg = 0; cfg < ARRAY_SIZE(old_irq); ++cfg)
694 if (irq == old_irq[cfg])
695 return cfg;
696 } else {
697 for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg)
698 if (irq == valid_irq[cfg])
699 return cfg;
700 }
701
702 return INVALID_IRQ;
703}
704
705/*
706 * Perform certain arcane port-checks to see whether there
707 * is a SoundScape board lurking behind the given ports.
708 */
709static int __devinit detect_sscape(struct soundscape *s, long wss_io)
710{
711 unsigned long flags;
712 unsigned d;
713 int retval = 0;
714
715 spin_lock_irqsave(&s->lock, flags);
716
717 /*
718 * The following code is lifted from the original OSS driver,
719 * and as I don't have a datasheet I cannot really comment
720 * on what it is doing...
721 */
722 if ((inb(HOST_CTRL_IO(s->io_base)) & 0x78) != 0)
723 goto _done;
724
725 d = inb(ODIE_ADDR_IO(s->io_base)) & 0xf0;
726 if ((d & 0x80) != 0)
727 goto _done;
728
729 if (d == 0)
730 s->ic_type = IC_ODIE;
731 else if ((d & 0x60) != 0)
732 s->ic_type = IC_OPUS;
733 else
734 goto _done;
735
736 outb(0xfa, ODIE_ADDR_IO(s->io_base));
737 if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0a)
738 goto _done;
739
740 outb(0xfe, ODIE_ADDR_IO(s->io_base));
741 if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0e)
742 goto _done;
743
744 outb(0xfe, ODIE_ADDR_IO(s->io_base));
745 d = inb(ODIE_DATA_IO(s->io_base));
746 if (s->type != SSCAPE_VIVO && (d & 0x9f) != 0x0e)
747 goto _done;
748
749 if (s->ic_type == IC_OPUS)
750 activate_ad1845_unsafe(s->io_base);
751
752 if (s->type == SSCAPE_VIVO)
753 wss_io += 4;
754
755 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
756 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
757
758 /* wait for WSS codec */
759 for (d = 0; d < 500; d++) {
760 if ((inb(wss_io) & 0x80) == 0)
761 break;
762 spin_unlock_irqrestore(&s->lock, flags);
763 msleep(1);
764 spin_lock_irqsave(&s->lock, flags);
765 }
766
767 if ((inb(wss_io) & 0x80) != 0)
768 goto _done;
769
770 if (inb(wss_io + 2) == 0xff)
771 goto _done;
772
773 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
774 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d);
775
776 if ((inb(wss_io) & 0x80) != 0)
777 s->type = MEDIA_FX;
778
779 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
780 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
781 /* wait for WSS codec */
782 for (d = 0; d < 500; d++) {
783 if ((inb(wss_io) & 0x80) == 0)
784 break;
785 spin_unlock_irqrestore(&s->lock, flags);
786 msleep(1);
787 spin_lock_irqsave(&s->lock, flags);
788 }
789
790 /*
791 * SoundScape successfully detected!
792 */
793 retval = 1;
794
795_done:
796 spin_unlock_irqrestore(&s->lock, flags);
797 return retval;
798}
799
800/*
801 * ALSA callback function, called when attempting to open the MIDI device.
802 * Check that the MIDI firmware has been loaded, because we don't want
803 * to crash the machine. Also check that someone isn't using the hardware
804 * IOCTL device.
805 */
806static int mpu401_open(struct snd_mpu401 *mpu)
807{
808 if (!verify_mpu401(mpu)) {
809 snd_printk(KERN_ERR "sscape: MIDI disabled, "
810 "please load firmware\n");
811 return -ENODEV;
812 }
813
814 return 0;
815}
816
817/*
818 * Initialse an MPU-401 subdevice for MIDI support on the SoundScape.
819 */
820static int __devinit create_mpu401(struct snd_card *card, int devnum,
821 unsigned long port, int irq)
822{
823 struct soundscape *sscape = get_card_soundscape(card);
824 struct snd_rawmidi *rawmidi;
825 int err;
826
827 err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
828 MPU401_INFO_INTEGRATED, irq, &rawmidi);
829 if (err == 0) {
830 struct snd_mpu401 *mpu = rawmidi->private_data;
831 mpu->open_input = mpu401_open;
832 mpu->open_output = mpu401_open;
833 mpu->private_data = sscape;
834
835 initialise_mpu401(mpu);
836 }
837
838 return err;
839}
840
841
842/*
843 * Create an AD1845 PCM subdevice on the SoundScape. The AD1845
844 * is very much like a CS4231, with a few extra bits. We will
845 * try to support at least some of the extra bits by overriding
846 * some of the CS4231 callback.
847 */
848static int __devinit create_ad1845(struct snd_card *card, unsigned port,
849 int irq, int dma1, int dma2)
850{
851 register struct soundscape *sscape = get_card_soundscape(card);
852 struct snd_wss *chip;
853 int err;
854 int codec_type = WSS_HW_DETECT;
855
856 switch (sscape->type) {
857 case MEDIA_FX:
858 case SSCAPE:
859 /*
860 * There are some freak examples of early Soundscape cards
861 * with CS4231 instead of AD1848/CS4248. Unfortunately, the
862 * CS4231 works only in CS4248 compatibility mode on
863 * these cards so force it.
864 */
865 if (sscape->ic_type != IC_OPUS)
866 codec_type = WSS_HW_AD1848;
867 break;
868
869 case SSCAPE_VIVO:
870 port += 4;
871 break;
872 default:
873 break;
874 }
875
876 err = snd_wss_create(card, port, -1, irq, dma1, dma2,
877 codec_type, WSS_HWSHARE_DMA1, &chip);
878 if (!err) {
879 unsigned long flags;
880 struct snd_pcm *pcm;
881
882 if (sscape->type != SSCAPE_VIVO) {
883 /*
884 * The input clock frequency on the SoundScape must
885 * be 14.31818 MHz, because we must set this register
886 * to get the playback to sound correct ...
887 */
888 snd_wss_mce_up(chip);
889 spin_lock_irqsave(&chip->reg_lock, flags);
890 snd_wss_out(chip, AD1845_CLOCK, 0x20);
891 spin_unlock_irqrestore(&chip->reg_lock, flags);
892 snd_wss_mce_down(chip);
893
894 }
895
896 err = snd_wss_pcm(chip, 0, &pcm);
897 if (err < 0) {
898 snd_printk(KERN_ERR "sscape: No PCM device "
899 "for AD1845 chip\n");
900 goto _error;
901 }
902
903 err = snd_wss_mixer(chip);
904 if (err < 0) {
905 snd_printk(KERN_ERR "sscape: No mixer device "
906 "for AD1845 chip\n");
907 goto _error;
908 }
909 if (chip->hardware != WSS_HW_AD1848) {
910 err = snd_wss_timer(chip, 0, NULL);
911 if (err < 0) {
912 snd_printk(KERN_ERR "sscape: No timer device "
913 "for AD1845 chip\n");
914 goto _error;
915 }
916 }
917
918 if (sscape->type != SSCAPE_VIVO) {
919 err = snd_ctl_add(card,
920 snd_ctl_new1(&midi_mixer_ctl, chip));
921 if (err < 0) {
922 snd_printk(KERN_ERR "sscape: Could not create "
923 "MIDI mixer control\n");
924 goto _error;
925 }
926 }
927
928 sscape->chip = chip;
929 }
930
931_error:
932 return err;
933}
934
935
936/*
937 * Create an ALSA soundcard entry for the SoundScape, using
938 * the given list of port, IRQ and DMA resources.
939 */
940static int __devinit create_sscape(int dev, struct snd_card *card)
941{
942 struct soundscape *sscape = get_card_soundscape(card);
943 unsigned dma_cfg;
944 unsigned irq_cfg;
945 unsigned mpu_irq_cfg;
946 struct resource *io_res;
947 struct resource *wss_res;
948 unsigned long flags;
949 int err;
950 int val;
951 const char *name;
952
953 /*
954 * Grab IO ports that we will need to probe so that we
955 * can detect and control this hardware ...
956 */
957 io_res = request_region(port[dev], 8, "SoundScape");
958 if (!io_res) {
959 snd_printk(KERN_ERR
960 "sscape: can't grab port 0x%lx\n", port[dev]);
961 return -EBUSY;
962 }
963 wss_res = NULL;
964 if (sscape->type == SSCAPE_VIVO) {
965 wss_res = request_region(wss_port[dev], 4, "SoundScape");
966 if (!wss_res) {
967 snd_printk(KERN_ERR "sscape: can't grab port 0x%lx\n",
968 wss_port[dev]);
969 err = -EBUSY;
970 goto _release_region;
971 }
972 }
973
974 /*
975 * Grab one DMA channel ...
976 */
977 err = request_dma(dma[dev], "SoundScape");
978 if (err < 0) {
979 snd_printk(KERN_ERR "sscape: can't grab DMA %d\n", dma[dev]);
980 goto _release_region;
981 }
982
983 spin_lock_init(&sscape->lock);
984 sscape->io_res = io_res;
985 sscape->wss_res = wss_res;
986 sscape->io_base = port[dev];
987
988 if (!detect_sscape(sscape, wss_port[dev])) {
989 printk(KERN_ERR "sscape: hardware not detected at 0x%x\n",
990 sscape->io_base);
991 err = -ENODEV;
992 goto _release_dma;
993 }
994
995 switch (sscape->type) {
996 case MEDIA_FX:
997 name = "MediaFX/SoundFX";
998 break;
999 case SSCAPE:
1000 name = "Soundscape";
1001 break;
1002 case SSCAPE_PNP:
1003 name = "Soundscape PnP";
1004 break;
1005 case SSCAPE_VIVO:
1006 name = "Soundscape VIVO";
1007 break;
1008 default:
1009 name = "unknown Soundscape";
1010 break;
1011 }
1012
1013 printk(KERN_INFO "sscape: %s card detected at 0x%x, using IRQ %d, DMA %d\n",
1014 name, sscape->io_base, irq[dev], dma[dev]);
1015
1016 /*
1017 * Check that the user didn't pass us garbage data ...
1018 */
1019 irq_cfg = get_irq_config(sscape->type, irq[dev]);
1020 if (irq_cfg == INVALID_IRQ) {
1021 snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]);
1022 return -ENXIO;
1023 }
1024
1025 mpu_irq_cfg = get_irq_config(sscape->type, mpu_irq[dev]);
1026 if (mpu_irq_cfg == INVALID_IRQ) {
1027 snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
1028 return -ENXIO;
1029 }
1030
1031 /*
1032 * Tell the on-board devices where their resources are (I think -
1033 * I can't be sure without a datasheet ... So many magic values!)
1034 */
1035 spin_lock_irqsave(&sscape->lock, flags);
1036
1037 sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e);
1038 sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00);
1039
1040 /*
1041 * Enable and configure the DMA channels ...
1042 */
1043 sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50);
1044 dma_cfg = (sscape->ic_type == IC_OPUS ? 0x40 : 0x70);
1045 sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg);
1046 sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20);
1047
1048 mpu_irq_cfg |= mpu_irq_cfg << 2;
1049 val = sscape_read_unsafe(sscape->io_base, GA_HMCTL_REG) & 0xF7;
1050 if (joystick[dev])
1051 val |= 8;
1052 sscape_write_unsafe(sscape->io_base, GA_HMCTL_REG, val | 0x10);
1053 sscape_write_unsafe(sscape->io_base, GA_INTCFG_REG, 0xf0 | mpu_irq_cfg);
1054 sscape_write_unsafe(sscape->io_base,
1055 GA_CDCFG_REG, 0x09 | DMA_8BIT
1056 | (dma[dev] << 4) | (irq_cfg << 1));
1057 /*
1058 * Enable the master IRQ ...
1059 */
1060 sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80);
1061
1062 spin_unlock_irqrestore(&sscape->lock, flags);
1063
1064 /*
1065 * We have now enabled the codec chip, and so we should
1066 * detect the AD1845 device ...
1067 */
1068 err = create_ad1845(card, wss_port[dev], irq[dev],
1069 dma[dev], dma2[dev]);
1070 if (err < 0) {
1071 snd_printk(KERN_ERR
1072 "sscape: No AD1845 device at 0x%lx, IRQ %d\n",
1073 wss_port[dev], irq[dev]);
1074 goto _release_dma;
1075 }
1076 strcpy(card->driver, "SoundScape");
1077 strcpy(card->shortname, name);
1078 snprintf(card->longname, sizeof(card->longname),
1079 "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
1080 name, sscape->chip->port, sscape->chip->irq,
1081 sscape->chip->dma1, sscape->chip->dma2);
1082
1083#define MIDI_DEVNUM 0
1084 if (sscape->type != SSCAPE_VIVO) {
1085 err = sscape_upload_bootblock(card);
1086 if (err >= 0)
1087 err = sscape_upload_microcode(card, err);
1088
1089 if (err == 0) {
1090 err = create_mpu401(card, MIDI_DEVNUM, port[dev],
1091 mpu_irq[dev]);
1092 if (err < 0) {
1093 snd_printk(KERN_ERR "sscape: Failed to create "
1094 "MPU-401 device at 0x%lx\n",
1095 port[dev]);
1096 goto _release_dma;
1097 }
1098
1099 /*
1100 * Initialize mixer
1101 */
1102 spin_lock_irqsave(&sscape->lock, flags);
1103 sscape->midi_vol = 0;
1104 host_write_ctrl_unsafe(sscape->io_base,
1105 CMD_SET_MIDI_VOL, 100);
1106 host_write_ctrl_unsafe(sscape->io_base,
1107 sscape->midi_vol, 100);
1108 host_write_ctrl_unsafe(sscape->io_base,
1109 CMD_XXX_MIDI_VOL, 100);
1110 host_write_ctrl_unsafe(sscape->io_base,
1111 sscape->midi_vol, 100);
1112 host_write_ctrl_unsafe(sscape->io_base,
1113 CMD_SET_EXTMIDI, 100);
1114 host_write_ctrl_unsafe(sscape->io_base,
1115 0, 100);
1116 host_write_ctrl_unsafe(sscape->io_base, CMD_ACK, 100);
1117
1118 set_midi_mode_unsafe(sscape->io_base);
1119 spin_unlock_irqrestore(&sscape->lock, flags);
1120 }
1121 }
1122
1123 /*
1124 * Now that we have successfully created this sound card,
1125 * it is safe to store the pointer.
1126 * NOTE: we only register the sound card's "destructor"
1127 * function now that our "constructor" has completed.
1128 */
1129 card->private_free = soundscape_free;
1130
1131 return 0;
1132
1133_release_dma:
1134 free_dma(dma[dev]);
1135
1136_release_region:
1137 release_and_free_resource(wss_res);
1138 release_and_free_resource(io_res);
1139
1140 return err;
1141}
1142
1143
1144static int __devinit snd_sscape_match(struct device *pdev, unsigned int i)
1145{
1146 /*
1147 * Make sure we were given ALL of the other parameters.
1148 */
1149 if (port[i] == SNDRV_AUTO_PORT)
1150 return 0;
1151
1152 if (irq[i] == SNDRV_AUTO_IRQ ||
1153 mpu_irq[i] == SNDRV_AUTO_IRQ ||
1154 dma[i] == SNDRV_AUTO_DMA) {
1155 printk(KERN_INFO
1156 "sscape: insufficient parameters, "
1157 "need IO, IRQ, MPU-IRQ and DMA\n");
1158 return 0;
1159 }
1160
1161 return 1;
1162}
1163
1164static int __devinit snd_sscape_probe(struct device *pdev, unsigned int dev)
1165{
1166 struct snd_card *card;
1167 struct soundscape *sscape;
1168 int ret;
1169
1170 ret = snd_card_create(index[dev], id[dev], THIS_MODULE,
1171 sizeof(struct soundscape), &card);
1172 if (ret < 0)
1173 return ret;
1174
1175 sscape = get_card_soundscape(card);
1176 sscape->type = SSCAPE;
1177
1178 dma[dev] &= 0x03;
1179 snd_card_set_dev(card, pdev);
1180
1181 ret = create_sscape(dev, card);
1182 if (ret < 0)
1183 goto _release_card;
1184
1185 ret = snd_card_register(card);
1186 if (ret < 0) {
1187 snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
1188 goto _release_card;
1189 }
1190 dev_set_drvdata(pdev, card);
1191 return 0;
1192
1193_release_card:
1194 snd_card_free(card);
1195 return ret;
1196}
1197
1198static int __devexit snd_sscape_remove(struct device *devptr, unsigned int dev)
1199{
1200 snd_card_free(dev_get_drvdata(devptr));
1201 dev_set_drvdata(devptr, NULL);
1202 return 0;
1203}
1204
1205#define DEV_NAME "sscape"
1206
1207static struct isa_driver snd_sscape_driver = {
1208 .match = snd_sscape_match,
1209 .probe = snd_sscape_probe,
1210 .remove = __devexit_p(snd_sscape_remove),
1211 /* FIXME: suspend/resume */
1212 .driver = {
1213 .name = DEV_NAME
1214 },
1215};
1216
1217#ifdef CONFIG_PNP
1218static inline int __devinit get_next_autoindex(int i)
1219{
1220 while (i < SNDRV_CARDS && port[i] != SNDRV_AUTO_PORT)
1221 ++i;
1222 return i;
1223}
1224
1225
1226static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard,
1227 const struct pnp_card_device_id *pid)
1228{
1229 static int idx = 0;
1230 struct pnp_dev *dev;
1231 struct snd_card *card;
1232 struct soundscape *sscape;
1233 int ret;
1234
1235 /*
1236 * Allow this function to fail *quietly* if all the ISA PnP
1237 * devices were configured using module parameters instead.
1238 */
1239 idx = get_next_autoindex(idx);
1240 if (idx >= SNDRV_CARDS)
1241 return -ENOSPC;
1242
1243 /*
1244 * Check that we still have room for another sound card ...
1245 */
1246 dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL);
1247 if (!dev)
1248 return -ENODEV;
1249
1250 if (!pnp_is_active(dev)) {
1251 if (pnp_activate_dev(dev) < 0) {
1252 snd_printk(KERN_INFO "sscape: device is inactive\n");
1253 return -EBUSY;
1254 }
1255 }
1256
1257 /*
1258 * Create a new ALSA sound card entry, in anticipation
1259 * of detecting our hardware ...
1260 */
1261 ret = snd_card_create(index[idx], id[idx], THIS_MODULE,
1262 sizeof(struct soundscape), &card);
1263 if (ret < 0)
1264 return ret;
1265
1266 sscape = get_card_soundscape(card);
1267
1268 /*
1269 * Identify card model ...
1270 */
1271 if (!strncmp("ENS4081", pid->id, 7))
1272 sscape->type = SSCAPE_VIVO;
1273 else
1274 sscape->type = SSCAPE_PNP;
1275
1276 /*
1277 * Read the correct parameters off the ISA PnP bus ...
1278 */
1279 port[idx] = pnp_port_start(dev, 0);
1280 irq[idx] = pnp_irq(dev, 0);
1281 mpu_irq[idx] = pnp_irq(dev, 1);
1282 dma[idx] = pnp_dma(dev, 0) & 0x03;
1283 if (sscape->type == SSCAPE_PNP) {
1284 dma2[idx] = dma[idx];
1285 wss_port[idx] = CODEC_IO(port[idx]);
1286 } else {
1287 wss_port[idx] = pnp_port_start(dev, 1);
1288 dma2[idx] = pnp_dma(dev, 1);
1289 }
1290 snd_card_set_dev(card, &pcard->card->dev);
1291
1292 ret = create_sscape(idx, card);
1293 if (ret < 0)
1294 goto _release_card;
1295
1296 ret = snd_card_register(card);
1297 if (ret < 0) {
1298 snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
1299 goto _release_card;
1300 }
1301
1302 pnp_set_card_drvdata(pcard, card);
1303 ++idx;
1304 return 0;
1305
1306_release_card:
1307 snd_card_free(card);
1308 return ret;
1309}
1310
1311static void __devexit sscape_pnp_remove(struct pnp_card_link * pcard)
1312{
1313 snd_card_free(pnp_get_card_drvdata(pcard));
1314 pnp_set_card_drvdata(pcard, NULL);
1315}
1316
1317static struct pnp_card_driver sscape_pnpc_driver = {
1318 .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
1319 .name = "sscape",
1320 .id_table = sscape_pnpids,
1321 .probe = sscape_pnp_detect,
1322 .remove = __devexit_p(sscape_pnp_remove),
1323};
1324
1325#endif /* CONFIG_PNP */
1326
1327static int __init sscape_init(void)
1328{
1329 int err;
1330
1331 err = isa_register_driver(&snd_sscape_driver, SNDRV_CARDS);
1332#ifdef CONFIG_PNP
1333 if (!err)
1334 isa_registered = 1;
1335
1336 err = pnp_register_card_driver(&sscape_pnpc_driver);
1337 if (!err)
1338 pnp_registered = 1;
1339
1340 if (isa_registered)
1341 err = 0;
1342#endif
1343 return err;
1344}
1345
1346static void __exit sscape_exit(void)
1347{
1348#ifdef CONFIG_PNP
1349 if (pnp_registered)
1350 pnp_unregister_card_driver(&sscape_pnpc_driver);
1351 if (isa_registered)
1352#endif
1353 isa_unregister_driver(&snd_sscape_driver);
1354}
1355
1356module_init(sscape_init);
1357module_exit(sscape_exit);
Note: See TracBrowser for help on using the repository browser.