source: GPL/branches/uniaud32-linux-3.2.102/include/DEVHELP.H@ 660

Last change on this file since 660 was 32, checked in by vladest, 20 years ago

initial import
File size: 26.0 KB
Line 
1/* $Id: DEVHELP.H,v 1.1.1.1 2003/07/02 13:56:58 eleph Exp $ */
2/*
3 * OS/2 device driver APIs (DevHelp)
4 *
5 * (C) 2000-2002 InnoTek Systemberatung GmbH
6 * (C) 2000-2001 Sander van Leeuwen (sandervl@xs4all.nl)
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public
19 * License along with this program; if not, write to the Free
20 * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
21 * USA.
22 *
23 */
24
25
26
27// DevHelp.h
28//
29// Watcom C++ callable entry points to the OS/2 DevHlp interface.
30//
31// All of the DevHlp functions in this library are prefaced with the string
32// "Dev" rather than "DevHlp_" which is used by the IBM DDK libraries. The
33// names were made incompatible so that calls to the IBM DevHlp routines
34// are not confused with calls to these routines (which may have different
35// calling signatures). If you need the IBM calling signatures, just use
36// some inline functions which call the Dev* functions.
37//
38// Also, the ordering of words in multi-word names has been changed so that
39// the object of an operation is the first word, and the operation name is
40// the second word. For example, "DevHlp_AllocPhys" has been renamed to
41// "DevPhysAlloc".
42//
43// This DevHlp library does not include certain categories of DevHlps that
44// are available in the IBM DDK. In particular, ABIOS specific functions
45// (function codes 29h and 34h to 37h), monitors (function codes 31h to
46// 35h), and some virtual memory functions (function codes 55h to 5Ah and
47// 66h) are not (yet) supported. Also, functions which are no longer
48// meaningful under OS/2 2.1, such as UnPhysToVirt and SetRomVector are not
49// included either. However, some undocumented or only partially
50// documented DevHlps such as the RAS tracing facility (DevSysTrace,
51// function code 28h) are included in this library.
52//
53// History:
54//
55// Sep 30, 94 David Bollo Initial version
56
57// Prevent multiple inclusion
58#if !defined(DevHelp_h)
59#define DevHelp_h 1
60
61#if !defined(__WATCOMC__) || !defined(__cplusplus)
62//#error Watcom C++ must be used for the inline DevHlp interface.
63#endif
64
65
66#include "devtype.h"
67#include <stacktoflat.h>
68
69
70// Calling conventions for device driver functions
71//
72//
73
74// Strategy call calling convention
75#pragma aux STRATEGY parm [fs ebx];
76
77#pragma aux VDD __far loadds parm [ax] modify [bx cx dx si di];
78
79// Dynamic API calling convention
80#pragma aux DYNAMIC __far loadds parm [si] value [ax];
81
82// Interface to the OS/2 Ring 0 Device Helper functions
83//
84//
85
86extern void DevHelp();
87#pragma aux DevHelp "DevHlp"
88
89extern void DevHelp_ModifiedDS();
90#pragma aux DevHelp_ModifiedDS "DevHlp_ModifiedDS"
91
92VOID DevCli // Disable interrupts
93 (
94 ); // Returns: Nothing
95
96#pragma aux DevCli = \
97 "cli";
98
99VOID DevSti // Enable interrupts
100 (
101 ); // Returns: Nothing
102
103#pragma aux DevSti = \
104 "sti";
105
106DWORD DevPushfCli();
107#pragma aux DevPushfCli = \
108 "pushfd" \
109 "cli" \
110 "pop eax" \
111 value [eax];
112
113VOID DevPopf(DWORD cpuflags);
114#pragma aux DevPopf = \
115 "push eax" \
116 "popfd" \
117 parm [eax];
118
119WORD16 DevBlock // Block the current thread
120 (
121 WORD32 Id, // Id to be used by DevRun call
122 WORD32 WaitMilliSec, // Milliseconds to wait for (-1 = forever)
123 BYTE InterruptableFlag // 0 if block is interruptable, else 1
124 ); // Returns: 0 = Ran, 1 = Timeout, 2 = Ctrl+C
125
126#pragma aux DevBlock = \
127 "mov bx, ax" \
128 "shr eax,16" \
129 "mov cx, di" \
130 "shr edi,16" \
131 "mov dl,04h" \
132 "call DevHelp" \
133 "setnz al" \
134 "setc bl" \
135 "inc al" \
136 "neg bl" \
137 "and al,bl" \
138 "xor ah,ah" \
139 modify [edx ebx ecx] \
140 parm [eax] [edi] [dh] \
141 value [ax];
142
143
144
145WORD16 DevRun // Run a blocked thread
146 (
147 WORD32 Id // Id used in DevBlock call
148 ); // Returns: Count of awakened threads
149
150#pragma aux DevRun = \
151 "mov bx, ax" \
152 "shr eax, 16" \
153 "mov dl,05h" \
154 "call DevHelp" \
155 modify [edx ebx] \
156 parm [eax] \
157 value [ax];
158
159WORD16 DevSegLock // Lock a segment down in memory
160 (
161 SEL Selector, // Selector of memory to lock down
162 WORD16 Type, // Type (0 = short, 1 = long, 3 = long & hi,
163 // 4 = short & verify)
164 WORD16 NoWaitFlag, // 0 to wait for lock or 1 to return immediately
165 HLOCK *Handle // Storage for segment lock handle
166 ); // Returns: 0 = success, 1 = error
167
168#pragma aux DevSegLock = \
169 "push edx" \
170 "mov bh,cl" \
171 "mov dl,13h" \
172 "call DevHelp" \
173 "setc cl" \
174 "xor ch,ch" \
175 "pop edx" \
176 "mov [edx],bx" \
177 "mov [edx+2],ax" \
178 parm [ax] [cx] [bx] [edx] \
179 modify [eax ebx] \
180 value [cx];
181
182
183
184WORD16 DevSegUnlock // Unlock a segment locked by DevSegLock
185 (
186 HLOCK Handle // Handle of locked segment
187 ); // Returns: 0 = success, other = error code
188
189#pragma aux DevSegUnlock = \
190 "mov bx, ax" \
191 "shr eax,16" \
192 "mov dl,14h" \
193 "call DevHelp" \
194 "setc dl" \
195 "xor dh,dh" \
196 "neg dx" \
197 "and ax,dx" \
198 modify [edx ebx] \
199 parm [eax] \
200 value [ax];
201
202#define VMDHL_NOBLOCK 0x0001
203#define VMDHL_CONTIGUOUS 0x0002
204#define VMDHL_16M 0x0004
205#define VMDHL_WRITE 0x0008
206#define VMDHL_LONG 0x0010
207#define VMDHL_VERIFY 0x0020
208
209int DevVMLock
210(
211 unsigned long flags,
212 unsigned long lin,
213 unsigned long length,
214 LINEAR pPageList,
215 LINEAR pLockHandle,
216 LINEAR pPageListCount
217); // Returns: 0 = success, 1 = error
218
219#pragma aux DevVMLock = \
220 "push edx" \
221 "mov dl,55h" \
222 "call DevHelp" \
223 "setc dl" \
224 "pop ebx" \
225 "mov dword ptr [ebx], eax" \
226 "xor eax, eax" \
227 "mov al, dl" \
228 parm [eax] [ebx] [ecx] [edi] [esi] [edx] \
229 modify [edx ebx] \
230 value [eax];
231
232#define VMDHA_16M 0x0001
233#define VMDHA_FIXED 0x0002
234#define VMDHA_SWAP 0x0004
235#define VMDHA_CONTIG 0x0008
236#define VMDHA_PHYS 0x0010
237#define VMDHA_PROCESS 0x0020
238#define VMDHA_SGSCONT 0x0040
239#define VMDHA_RESERVE 0x0100
240#define VMDHA_USEHIGHMEM 0x0800
241
242int DevVMAlloc(ULONG flags, ULONG size, LINEAR physaddr, LINEAR addr);
243#pragma aux DevVMAlloc = \
244 "mov dl,57h" \
245 "call DevHelp" \
246 "setc dl" \
247 "mov dword ptr [esi], eax" \
248 "xor eax, eax" \
249 "mov al, dl" \
250 parm [eax] [ecx] [edi] [esi] \
251 modify [edx] \
252 value [eax];
253
254ULONG DevVMFree(LINEAR LinearAddr);
255#pragma aux DevVMFree = \
256 "mov dl,58h" \
257 "call DevHelp" \
258 "setc dl" \
259 "xor eax, eax" \
260 "mov al, dl" \
261 parm [eax] \
262 modify [edx] \
263 value [eax];
264
265#define VMDHGP_WRITE 0x0001
266#define VMDHGP_SELMAP 0x0002
267#define VMDHGP_SGSCONTROL 0x0004
268#define VMDHGP_4MEG 0x0008
269
270ULONG DevVMGlobalToProcess(ULONG Flags, LINEAR LinearAddr, ULONG Length,
271 LINEAR ProcessLinearAddr);
272#pragma aux DevVMGlobalToProcess = \
273 "mov dl,5Ah" \
274 "call DevHelp" \
275 "setc dl" \
276 "mov dword ptr [edi], eax" \
277 "xor eax, eax" \
278 "mov al, dl" \
279 parm [eax] [ebx] [ecx] [edi]\
280 modify [edx] \
281 value [eax];
282
283#define VMDHPG_READONLY 0x0000
284#define VMDHPG_WRITE 0x0001
285
286ULONG DevVMProcessToGlobal(ULONG Flags, LINEAR LinearAddr, ULONG Length,
287 LINEAR GlobalLinearAddr);
288#pragma aux DevVMProcessToGlobal = \
289 "mov dl,59h" \
290 "call DevHelp" \
291 "setc dl" \
292 "mov dword ptr [edi], eax" \
293 "xor eax, eax" \
294 "mov al, dl" \
295 parm [eax] [ebx] [ecx] [edi] \
296 modify [edx] \
297 value [eax];
298
299#define VMDHS_DECOMMIT 0x0001
300#define VMDHS_RESIDENT 0x0002
301#define VMDHS_SWAP 0x0004
302
303ULONG DevVMSetMem(ULONG Flags, LINEAR LinearAddr, ULONG Size);
304#pragma aux DevHelp_VMSetMem = \
305 "mov dl,66h" \
306 "call DevHelp" \
307 parm [eax] [ebx] [ecx] \
308 modify [edx] \
309 value [eax];
310
311ULONG DevVMUnLock(LINEAR pLockHandle);
312#pragma aux DevVMUnLock = \
313 "mov dl,56h" \
314 "call DevHelp" \
315 "setc dl" \
316 "xor eax, eax" \
317 "mov al, dl" \
318 parm [esi] \
319 modify [edx] \
320 value [eax];
321
322
323WORD16 DevPhysToVirt // Convert a physical address to a 16:16 address
324 (
325 PHYSICAL PhysAddr, // Physical address to convert
326 WORD16 Length, // Length of virtual segment
327 VIRTUAL FAR *VirtAddr // Storage for virtual address
328 ); // Returns: 0 = success, other = error code
329
330#pragma aux DevPhysToVirt = \
331 "xchg ax,bx" \
332 "mov dx,0115h" \
333 "call DevHelp" \
334 "setc dl" \
335 "xor dh,dh" \
336 "neg dx" \
337 "mov fs:[esi],di" \
338 "mov fs:[esi+2],es" \
339 "and ax,dx" \
340 modify [dx es di] \
341 parm [bx ax] [cx] [fs esi] \
342 value [ax];
343
344
345
346WORD16 DevVirtToPhys // Convert a locked 16:16 address to physical
347 (
348 VIRTUAL VirtAddr, // Virtual address to convert (must be locked)
349 PHYSICAL FAR *PhysAddr // Storage for physical address
350 ); // Returns: Nothing
351
352#pragma aux DevVirtToPhys = \
353 "push ecx" \
354 "push ds" \
355 "mov si, ax" \
356 "shr eax, 16" \
357 "mov ds, ax" \
358 "mov dl,16h" \
359 "call DevHelp_ModifiedDS" \
360 "setc dl" \
361 "xor dh,dh" \
362 "pop ds" \
363 "pop ecx" \
364 "mov fs:[ecx],bx" \
365 "mov fs:[ecx+2],ax" \
366 "mov ax,dx" \
367 modify [edx ebx esi] \
368 parm [eax] [fs ecx] \
369 value [ax];
370
371
372
373WORD16 DevPhysToUVirt // Convert a physical address to an LDT address
374 (
375 PHYSICAL PhysAddr, // Physical address to convert
376 WORD16 Length, // Length of virtual segment
377 BYTE Type, // Type (0 = code, 1 = data, 2 = free, 5 = video)
378 BYTE Tag, // Tag (only with type 5)
379 VIRTUAL FAR *VirtAddr // Storage for virtual address
380 ); // Returns: 0 = success, 1 = error
381
382#pragma aux DevPhysToUVirt = \
383 "push es" \
384 "push edi" \
385 "mov bx,ax" \
386 "shr eax, 16" \
387 "mov dl,17h" \
388 "call DevHelp" \
389 "setc dl" \
390 "xor dh,dh" \
391 "pop edi" \
392 "mov word ptr fs:[edi], bx" \
393 "mov word ptr fs:[edi+2], es" \
394 "pop es" \
395 modify [ebx eax] \
396 parm [eax] [cx] [dh] [si] [fs edi] \
397 value [dx];
398
399
400
401WORD16 DevPhysAlloc // Allocate a block of physical memory
402 (
403 WORD32 Size, // Size of memory to allocate
404 BYTE LoFlag, // Flag: 0 = above 1 MB, 1 = below 1 MB
405 PHYSICAL FAR *PhysAddr // Storage for address of memory block
406 ); // Returns: 0 = success, other = error code
407
408#pragma aux DevPhysAlloc = \
409 "mov bx, ax" \
410 "shr eax,16" \
411 "mov dl,18h" \
412 "call DevHelp" \
413 "setc dl" \
414 "xor dh,dh" \
415 "neg dx" \
416 "mov fs:[esi],bx" \
417 "mov fs:[esi+2],ax" \
418 "and ax,dx" \
419 modify [edx ebx] \
420 parm [eax] [dh] [fs esi] \
421 value [ax];
422
423
424
425WORD16 DevPhysFree // Free a block of physical memory
426 (
427 PHYSICAL PhysAddr // Address of memory block to be freed
428 ); // Returns: 0 = success, 1 = error
429
430#pragma aux DevPhysFree = \
431 "xchg ax,bx" \
432 "mov dl,19h" \
433 "call DevHelp" \
434 "setc dl" \
435 "xor dh,dh" \
436 parm [bx ax] \
437 value [dx];
438
439
440
441WORD16 DevIRQSet // Register an interrupt handler for an IRQ
442 (
443 WORD16 Handler, // Handler function entry-point
444 WORD16 IRQ, // IRQ Number to handle
445 BYTE SharableFlag // Sharable: 1 = sharable, 0 = exclusive
446 ); // Returns: 0 = success, other = error code
447
448#pragma aux DevIRQSet = \
449 "mov dl,1Bh" \
450 "call DevHelp" \
451 "setc dl" \
452 "xor dh,dh" \
453 "neg dx" \
454 "and ax,dx" \
455 modify [dl] \
456 parm [ax] [bx] [dh] \
457 value [ax];
458
459
460
461WORD16 DevIRQClear // Remove a registered IRQ handler
462 (
463 WORD16 IRQ // IRQ Number to release
464 ); // Returns: 0 = success, 1 = error
465
466#pragma aux DevIRQClear = \
467 "mov dl,1Ch" \
468 "call DevHelp" \
469 "setc dl" \
470 "xor dh,dh" \
471 parm [bx] \
472 value [dx];
473
474WORD16 DevVerifyAccess // Verify that the caller has access to memory
475 (
476 VIRTUAL Address, // Address of memory to verify
477 WORD16 Length, // Length of memory to verify
478 BYTE Type // Type of access (0 = read, 1 = read/write)
479 ); // Returns: 0 = success, 1 = error
480
481#pragma aux DevVerifyAccess = \
482 "mov di, ax" \
483 "shr eax, 16" \
484 "mov dl,27h" \
485 "call DevHelp" \
486 "setc dl" \
487 "xor dh,dh" \
488 modify [edx edi] \
489 parm [eax] [cx] [dh] \
490 value [dx];
491
492
493
494WORD16 DevAttachDD // Attach to another device driver for IDC
495(
496 WORD32 DriverName, // Device driver name (from device header)
497 WORD32 IDCData // Storage for IDC data
498); // Returns: 0 = success, 1 = error
499
500#pragma aux DevAttachDD = \
501 "mov dl,2Ah" \
502 "call DevHelp" \
503 "setc dl" \
504 "xor dh,dh" \
505 parm [ebx] [edi] \
506 value [dx];
507
508WORD16 DevAllocGDTSel // Allocate GDT selectors at Init time
509 (
510 WORD32 SelectorArray, // Storage for allocated GDT selectors (16:16)
511 WORD16 Count // Number of GDT selectors to allocate
512 ); // Returns: 0 = success, other = error code
513
514#pragma aux DevAllocGDTSel = \
515 "push es" \
516 "mov eax, edi" \
517 "shr eax, 16" \
518 "mov es, ax" \
519 "mov dl,2Dh" \
520 "call DevHelp" \
521 "setc dl" \
522 "xor dh,dh" \
523 "neg dx" \
524 "and ax,dx" \
525 "pop es" \
526 modify [edx eax] \
527 parm [edi] [cx] \
528 value [ax];
529
530
531
532
533WORD16 DevPhysToGDTSelector // Convert a 32 bit address to a GDT selector
534 (
535 PHYSICAL Address, // 32 bit physical address to convert
536 WORD16 Length, // Length of fabricated segment
537 SEL Selector // Selector to refer to 32 bit address
538 ); // Returns: 0 = success, other = error code
539
540#pragma aux DevPhysToGDTSelector = \
541 "mov ax, bx" \
542 "shr eax,16" \
543 "mov dl,2Eh" \
544 "call DevHelp" \
545 "setc dl" \
546 "xor dh,dh" \
547 "neg dx" \
548 "and ax,dx" \
549 modify [dx bx] \
550 parm [eax] [cx] [si] \
551 value [ax];
552
553
554
555
556VOID DevEOI // Signal end of interrupt processing to PIC
557 (
558 WORD16 IRQ // IRQ number to end
559 ); // Returns: Nothing
560
561#pragma aux DevEOI = \
562 "mov dl,31h" \
563 "call DevHelp" \
564 modify [dl] \
565 parm [ax];
566
567
568WORD16 DevRegisterPDD // Register driver for PDD-VDD communications
569 (
570 WORD32 Name, // Device driver name
571 WORD32 EntryPoint // Entry point for PDD-VDD communications
572 ); // Returns: 0 = success, 1 = error
573
574#pragma aux DevRegisterPDD = \
575 "push ds" \
576 "push es" \
577 "mov si,ax" \
578 "shr eax, 16" \
579 "mov ds, ax" \
580 "mov di, bx" \
581 "shr ebx, 16" \
582 "mov es, bx" \
583 "mov dl,50h" \
584 "call DevHelp" \
585 "setc dl" \
586 "xor dh,dh" \
587 "pop es" \
588 "pop ds" \
589 modify [esi edi ebx] \
590 parm [eax] [ebx] \
591 value [dx];
592
593
594
595WORD16 DevBeep // Generate a beep
596 (
597 WORD16 Frequency, // Beep pitch in hz
598 WORD16 Duration // Beep duration
599 ); // Returns: 0 = success, other = error code
600
601#pragma aux DevBeep = \
602 "mov dl,52h" \
603 "call DevHelp" \
604 "setc dl" \
605 "xor dh,dh" \
606 "neg dx" \
607 "and ax,dx" \
608 modify [dx] \
609 parm [bx] [cx] \
610 value [ax];
611
612
613
614WORD16 DevFreeGDTSel // Free an allocated GDT selector at task time
615 (
616 SEL Selector // Selector to free
617 ); // Returns: 0 = success, other = error code
618
619#pragma aux DevFreeGDTSel = \
620 "mov dl,53h" \
621 "call DevHelp" \
622 "setc dl" \
623 "xor dh,dh" \
624 "neg dx" \
625 "and ax,dx" \
626 modify [dx] \
627 parm [ax] \
628 value [ax];
629
630#define GDTSEL_R3CODE 0x0000 /*@V76282*/
631#define GDTSEL_R3DATA 0x0001 /*@V76282*/
632#define GDTSEL_R2CODE 0x0003 /*@V76282*/
633#define GDTSEL_R2DATA 0x0004 /*@V76282*/
634#define GDTSEL_R0CODE 0x0005 /*@V76282*/
635#define GDTSEL_R0DATA 0x0006 /*@V76282*/
636
637/* GDTSEL_ADDR32 may be OR'd with above defines */ /*@V76282*/
638#define GDTSEL_ADDR32 0x0080 /*@V76282*/
639
640
641WORD16 DevPhysToGDTSel // Map a physical address to a GDT selector
642 (
643 PHYSICAL Address, // 32 bit physical address to convert
644 WORD32 Length, // Length of fabricated segment
645 SEL Selector, // Selector to refer to 32 bit address
646 BYTE Access // Descriptor access priviledges
647 ); // Returns: 0 = success, other = error code
648
649#pragma aux DevPhysToGDTSel = \
650 "and ecx,0000FFFFh" \
651 "mov dl,54h" \
652 "call DevHelp" \
653 "setc dl" \
654 "xor dh,dh" \
655 "neg dx" \
656 "and ax,dx" \
657 parm [eax] [ecx] [si] [dh] \
658 modify [ecx edx] \
659 value [ax];
660
661
662
663WORD16 DevVirtToLin // Convert a virtual address to linear
664 (
665 SEL Selector, // Selector to convert
666 WORD32 Offset, // Offset to convert
667 LINEAR FAR *Linear // Storage for linear address
668 ); // Returns: 0 = success, other = error code
669
670#pragma aux DevVirtToLin = \
671 "mov dl,5Bh" \
672 "call DevHelp" \
673 "setc dl" \
674 "mov fs:[edi], eax" \
675 "xor dh,dh" \
676 "neg dx" \
677 "and ax,dx" \
678 modify [edx] \
679 parm [ax] [esi] [fs edi] \
680 value [ax];
681
682
683ULONG DevResetEventSem(ULONG hEvent, FARPTR16 pNumPosts);
684#pragma aux DevResetEventSem = \
685 "mov dl,6Ah" \
686 "call DevHelp" \
687 "setc dl" \
688 "xor eax, eax" \
689 "mov al, dl" \
690 parm [eax] [edi] \
691 modify [edx] \
692 value [eax];
693
694ULONG DevCloseEventSem(ULONG hEvent);
695#pragma aux DevCloseEventSem = \
696 "mov dl,68h" \
697 "call DevHelp" \
698 "setc dl" \
699 "xor eax, eax" \
700 "mov al, dl" \
701 parm [eax] \
702 modify [edx] \
703 value [eax];
704
705ULONG DevOpenEventSem(ULONG hEvent);
706#pragma aux DevOpenEventSem = \
707 "mov dl,67h" \
708 "call DevHelp" \
709 "setc dl" \
710 "xor eax, eax" \
711 "mov al, dl" \
712 parm [eax] \
713 modify [edx] \
714 value [eax];
715
716ULONG DevPostEventSem(ULONG hEvent);
717#pragma aux DevPostEventSem = \
718 "mov dl,69h" \
719 "call DevHelp" \
720 "setc dl" \
721 "xor eax, eax" \
722 "mov al, dl" \
723 parm [eax] \
724 modify [edx] \
725 value [eax];
726
727ULONG DevFreeCtxHook(ULONG HookHandle);
728#pragma aux DevFreeCtxHook = \
729 "mov dl,64h", \
730 "call DevHelp" \
731 "setc dl" \
732 "xor eax, eax" \
733 "mov al, dl" \
734 parm [eax] \
735 modify [edx] \
736 value [eax];
737
738ULONG DevAllocateCtxHook(ULONG HookHandler, LINEAR HookHandle);
739#pragma aux DevAllocateCtxHook = \
740 "mov ebx,-1" \
741 "mov dl,63h" \
742 "call DevHelp" \
743 "setc dl" \
744 "mov dword ptr [edi], eax" \
745 "xor eax, eax" \
746 "mov al, dl" \
747 parm [eax] [edi] \
748 modify [edx ebx] \
749 value [eax];
750
751ULONG DevArmCtxHook(ULONG HookData, ULONG HookHandle);
752#pragma aux DevArmCtxHook = \
753 "mov ecx, -1" \
754 "mov dl,65h", \
755 "call DevHelp" \
756 "setc dl" \
757 "xor eax, eax" \
758 "mov al, dl" \
759 parm [eax] [ebx] \
760 modify [edx ecx] \
761 value [eax];
762
763typedef struct {
764 DWORD physaddr;
765 DWORD size;
766} PAGELIST;
767
768ULONG DevPageListToLin(ULONG Size, PAGELIST NEAR *pPageList, LINEAR NEAR *LinearAddr);
769#pragma aux DevPageListToLin = \
770 "mov dl,5Fh" \
771 "call DevHelp" \
772 "setc dl" \
773 "mov [esi], eax" \
774 "xor eax, eax" \
775 "mov al, dl" \
776 parm [ecx] [edi] [esi] \
777 modify [edx] \
778 value [eax];
779
780ULONG DevLinToPageList(LINEAR LinearAddr, ULONG Size, PAGELIST NEAR *pPageList);
781#pragma aux DevLinToPageList = \
782 "mov dl,5Eh" \
783 "call DevHelp" \
784 "setc dl" \
785 "xor eax, eax" \
786 "mov al, dl" \
787 parm [eax] [ecx] [edi] \
788 modify [edx] \
789 value [eax];
790
791ULONG DevHelp_LinToGDTSelector(SEL Selector, LINEAR LinearAddr, ULONG Size);
792#pragma aux DevHelp_LinToGDTSelector = \
793 "mov dl,5Ch" \
794 "call DevHelp" \
795 "setc dl" \
796 "xor eax, eax" \
797 "mov al, dl" \
798 value [eax] \
799 modify [edx] \
800 parm [ax] [ebx] [ecx] \
801
802#define DHGETDOSV_SYSINFOSEG 1
803#define DHGETDOSV_LOCINFOSEG 2
804#define DHGETDOSV_VECTORSDF 4
805#define DHGETDOSV_VECTORREBOOT 5
806#define DHGETDOSV_YIELDFLAG 7
807#define DHGETDOSV_TCYIELDFLAG 8
808#define DHGETDOSV_DOSCODEPAGE 11
809#define DHGETDOSV_INTERRUPTLEV 13
810#define DHGETDOSV_DEVICECLASSTABLE 14
811#define DHGETDOSV_DMQSSELECTOR 15
812#define DHGETDOSV_APMINFO 16
813
814ULONG DevGetDOSVar(ULONG VarNumber, ULONG VarMember, VOID NEAR *KernalVar);
815#pragma aux DevGetDOSVar = \
816 "xor ebx, ebx" \
817 "mov dl,24h" \
818 "call DevHelp" \
819 "setc dl" \
820 "mov word ptr [edi],bx" \
821 "mov word ptr [edi+2],ax" \
822 "xor eax, eax" \
823 "mov al, dl" \
824 value [eax] \
825 parm [eax] [ecx] [edi] \
826 modify [edx ebx];
827
828ULONG DevSetTimer(DWORD TimerHandler);
829#pragma aux DevSetTimer = \
830 "mov dl,1Dh" \
831 "call DevHelp" \
832 "setc dl" \
833 "xor eax, eax" \
834 "mov al, dl" \
835 value [eax] \
836 parm [eax] \
837 modify [eax edx];
838
839ULONG DevTickCount(DWORD TimerHandler, DWORD TickCount);
840#pragma aux DevTickCount = \
841 "mov dl,33h" \
842 "call DevHelp" \
843 "setc dl" \
844 "xor eax, eax" \
845 "mov al, dl" \
846 value [eax] \
847 parm [eax] [ebx] \
848 modify [eax edx];
849
850#ifdef FLATSTACK
851#define kstrcpy strcpy
852#define kmemcpy memcpy
853#define kmemset memset
854#else
855#define kstrcpy _fstrcpy
856#define kmemcpy _fmemcpy
857#define kmemset _fmemset
858#define strcpy _fstrcpy
859#define memcpy _fmemcpy
860#define memset _fmemset
861#endif
862
863#endif // DevHelp_h
Note: See TracBrowser for help on using the repository browser.