source: vendor/current/docs-xml/Samba3-HOWTO/TOSHARG-BDC.xml

<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE chapter PUBLIC "-//Samba-Team//DTD DocBook V4.2-Based Variant V1.0//EN" "http://www.samba.org/samba/DTD/samba-doc">
<chapter id="samba-bdc">

<chapterinfo>
        &author.jht;
        &author.vl;
        <author>&person.gd;<contrib>LDAP updates</contrib></author>
</chapterinfo>

<title>Backup Domain Control</title>

<para>
Before you continue reading this section, please make sure that you are comfortable
with configuring a Samba domain controller as described in <link linkend="samba-pdc">Domain Control</link>.
</para>

<sect1>
<title>Features and Benefits</title>

<para>
This is one of the most difficult chapters to summarize. It does not matter what we say here, for someone will
still draw conclusions and/or approach the Samba Team with expectations that are either not yet capable of
being delivered or that can be achieved far more effectively using a totally different approach. In the event
that you should have a persistent concern that is not addressed in this book, please email <ulink
url="mailto:jht@samba.org">John H. Terpstra</ulink> clearly setting out your requirements and/or question, and
we will do our best to provide a solution.
</para>

<para>
<indexterm><primary>SAM backend</primary><secondary>LDAP</secondary></indexterm>
<indexterm><primary>PDC</primary></indexterm>
<indexterm><primary>BDC</primary></indexterm>
<indexterm><primary>LDAP</primary><secondary>slave</secondary></indexterm>
<indexterm><primary>scalability</primary></indexterm>
Samba can act as a Backup Domain Controller (BDC) to another Samba Primary Domain Controller (PDC). A
Samba PDC can operate with an LDAP account backend. The LDAP backend can be either a common master LDAP
server or a slave server. The use of a slave LDAP server has the benefit that when the master is down, clients
may still be able to log onto the network.  This effectively gives Samba a high degree of scalability and is
an effective solution for large organizations. If you use an LDAP slave server for a PDC, you will need to
ensure the master's continued availability &smbmdash; if the slave finds its master down at the wrong time,
you will have stability and operational problems.
</para>

<para>
<indexterm><primary>two-way</primary><secondary>propagation</secondary></indexterm>
<indexterm><primary>replication</primary><secondary>SAM</secondary></indexterm>
<indexterm><primary>non-LDAP</primary><secondary>backend</secondary></indexterm>
<indexterm><primary>propagate</primary></indexterm>
It is not possible to run a Samba BDC with a non-LDAP backend, as that backend must allow some form of
"two-way" propagation of changes from the BDC to the master.  At this time only LDAP delivers the capability
to propagate identity database changes from the BDC to the PDC. The BDC can use a slave LDAP server, while it
is preferable for the PDC to use as its primary an LDAP master server.
</para>

</sect1>

<sect1>
<title>Essential Background Information</title>

<para>
<indexterm><primary>domain controller</primary></indexterm>
<indexterm><primary>logon requests</primary></indexterm>
<indexterm><primary>LanMan</primary></indexterm>
<indexterm><primary>Netlogon</primary></indexterm>
A domain controller is a machine that is able to answer logon requests from network
workstations. Microsoft LanManager and IBM LanServer were two early products that
provided this capability. The technology has become known as the LanMan Netlogon service.
</para>

<para>
<indexterm><primary>network</primary><secondary>logon</secondary><tertiary>service</tertiary></indexterm>
<indexterm><primary>Windows NT3.10</primary></indexterm>
When MS Windows NT3.10 was first released, it supported a new style of Domain Control
and with it a new form of the network logon service that has extended functionality.
This service became known as the NT NetLogon Service. The nature of this service has
changed with the evolution of MS Windows NT and today provides a complex array of
services that are implemented over an intricate spectrum of technologies.
</para>

<sect2>
<title>MS Windows NT4-style Domain Control</title>

<para>
<indexterm><primary>domain controller</primary></indexterm>
<indexterm><primary>authentication server</primary></indexterm>
<indexterm><primary>username</primary></indexterm>
<indexterm><primary>password</primary></indexterm>
<indexterm><primary>SAM</primary></indexterm>
<indexterm><primary>Security Account Manager</primary><see>SAM</see></indexterm>
<indexterm><primary>domain control database</primary><see>SAM</see></indexterm>
Whenever a user logs into a Windows NT4/200x/XP Professional workstation,
the workstation connects to a domain controller (authentication server) to validate that
the username and password the user entered are valid. If the information entered
does not match account information that has been stored in the domain
control database (the SAM, or Security Account Manager database), a set of error
codes is returned to the workstation that has made the authentication request.
</para>

<para>
<indexterm><primary>account information</primary></indexterm>
<indexterm><primary>machine accounts database</primary></indexterm>
<indexterm><primary>profile</primary></indexterm>
<indexterm><primary>network access profile</primary></indexterm>
<indexterm><primary>desktop profile</primary></indexterm>
When the username/password pair has been validated, the domain controller
(authentication server) will respond with full enumeration of the account information
that has been stored regarding that user in the user and machine accounts database
for that domain. This information contains a complete network access profile for
the user but excludes any information that is particular to the user's desktop profile,
or for that matter it excludes all desktop profiles for groups that the user may
belong to. It does include password time limits, password uniqueness controls,
network access time limits, account validity information, machine names from which the
user may access the network, and much more. All this information was stored in the SAM
in all versions of MS Windows NT (3.10, 3.50, 3.51, 4.0).
</para>

<para>
<indexterm><primary>replication</primary><secondary>SAM</secondary></indexterm>
<indexterm><primary>%SystemRoot%\System32\config</primary></indexterm>
<indexterm><primary>C:\WinNT\System32\config</primary></indexterm>
<indexterm><primary>BDC</primary></indexterm>
<indexterm><primary>SAM</primary></indexterm>
The account information (user and machine) on domain controllers is stored in two files,
one containing the security information and the other the SAM. These are stored in files
by the same name in the <filename>%SystemRoot%\System32\config</filename> directory. 
This normally translates to the path <filename>C:\WinNT\System32\config</filename>. These
are the files that are involved in replication of the SAM database where BDCs are present
on the network.
</para>

<para>
There are two situations in which it is desirable to install BDCs:
</para>

<itemizedlist>
        <listitem><para>
        <indexterm><primary>PDC</primary></indexterm>
        <indexterm><primary>BDC</primary></indexterm>
        On the local network that the PDC is on, if there are many
        workstations and/or where the PDC is generally very busy. In this case the BDCs
        will pick up network logon requests and help to add robustness to network services.
        </para></listitem>

        <listitem><para>
        <indexterm><primary>network</primary><secondary>wide-area</secondary></indexterm>
        At each remote site, to reduce wide-area network traffic and to add stability to
        remote network operations. The design of the network, and the strategic placement of
        BDCs, together with an implementation that localizes as much of network to client
        interchange as possible, will help to minimize wide-area network bandwidth needs
        (and thus costs).
        </para></listitem>
</itemizedlist>

<para>
<indexterm><primary>PDC</primary></indexterm>
<indexterm><primary>SAM</primary></indexterm>
<indexterm><primary>user account database</primary></indexterm>
<indexterm><primary>BDC</primary></indexterm>
<indexterm><primary>trigger</primary></indexterm>
The interoperation of a PDC and its BDCs in a true Windows NT4 environment is worth
mentioning here. The PDC contains the master copy of the SAM. In the event that an
administrator makes a change to the user account database while physically present
on the local network that has the PDC, the change will likely be made directly to
the PDC instance of the master copy of the SAM. In the event that this update may
be performed in a branch office, the change will likely be stored in a delta file
on the local BDC. The BDC will then send a trigger to the PDC to commence the process
of SAM synchronization. The PDC will then request the delta from the BDC and apply
it to the master SAM. The PDC will then contact all the BDCs in the domain and
trigger them to obtain the update and then apply that to their own copy of the SAM.
</para>

<para>
<indexterm><primary>SAM</primary><secondary>replication</secondary></indexterm>
<indexterm><primary>SAM</primary><secondary>delta file</secondary></indexterm>
<indexterm><primary>PDC</primary></indexterm>
<indexterm><primary>BDC</primary></indexterm>
Samba cannot participate in true SAM replication and is therefore not able to
employ precisely the same protocols used by MS Windows NT4. A Samba BDC will
not create SAM update delta files. It will not interoperate with a PDC (NT4 or Samba)
to synchronize the SAM from delta files that are held by BDCs.
</para>

<para>
<indexterm><primary>PDC</primary></indexterm>
<indexterm><primary>BDC</primary></indexterm>
Samba cannot function as a BDC to an MS Windows NT4 PDC, and Samba-3 cannot
function correctly as a PDC to an MS Windows NT4 BDC. Both Samba and MS Windows
NT4 can function as a BDC to its own type of PDC.
</para>

<para>
<indexterm><primary>SAM</primary></indexterm>
<indexterm><primary>BDC</primary></indexterm>
<indexterm><primary>domain security</primary></indexterm>
The BDC is said to hold a <emphasis>read-only</emphasis> of the SAM from which
it is able to process network logon requests and authenticate users. The BDC can
continue to provide this service, particularly while, for example, the wide-area
network link to the PDC is down. A BDC plays a very important role in both the
maintenance of domain security as well as in network integrity.
</para>

<para>
<indexterm><primary>PDC</primary></indexterm>
<indexterm><primary>promoted</primary></indexterm>
<indexterm><primary>demoted</primary></indexterm>
<indexterm><primary>reconfiguration</primary></indexterm>
In the event that the NT4 PDC should need to be taken out of service, or if it dies, one of the NT4 BDCs can
be promoted to a PDC. If this happens while the original NT4 PDC is online, it is automatically demoted to an
NT4 BDC. This is an important aspect of domain controller management. The tool that is used to effect a
promotion or a demotion is the Server Manager for Domains. It should be noted that Samba BDCs cannot be
promoted in this manner because reconfiguration of Samba requires changes to the &smb.conf; file. It is easy
enough to manuall change the &smb.conf; file and then restart relevant Samba network services.
</para>

<sect3>
<title>Example PDC Configuration</title>

<para>
<indexterm><primary>domain logon</primary></indexterm>
<indexterm><primary>PDC</primary></indexterm>
Beginning with Version 2.2, Samba officially supports domain logons for all current Windows clients, including
Windows NT4, 2003, and XP Professional. For Samba to be enabled as a PDC, some parameters in the
<smbconfsection name="[global]"/> section of the &smb.conf; have to be set.  Refer to <link
linkend="minimalPDC">the Minimal smb.conf for a PDC in Use with a BDC &smbmdash; LDAP Server on PDC
section</link> for an example of the minimum required settings.
</para>

<example id="minimalPDC">
<title>Minimal smb.conf for a PDC in Use with a BDC &smbmdash; LDAP Server on PDC</title>
<smbconfblock>
<smbconfoption name="workgroup">&example.workgroup;</smbconfoption>
<smbconfoption name="passdb backend">ldapsam://localhost:389</smbconfoption>
<smbconfoption name="domain master">yes</smbconfoption>
<smbconfoption name="domain logons">yes</smbconfoption>
<smbconfoption name="ldap suffix">dc=quenya,dc=org</smbconfoption>
<smbconfoption name="ldap user suffix">ou=Users</smbconfoption>
<smbconfoption name="ldap group suffix">ou=Groups</smbconfoption>
<smbconfoption name="ldap machine suffix">ou=Computers</smbconfoption>
<smbconfoption name="ldap idmap suffix">ou=Idmap</smbconfoption>
<smbconfoption name="ldap admin dn">cn=sambadmin,dc=quenya,dc=org</smbconfoption>
</smbconfblock>
</example>

<para>
<indexterm><primary>profile path</primary></indexterm>
<indexterm><primary>home drive</primary></indexterm>
Several other things like a <smbconfsection name="[homes]"/> and a <smbconfsection name="[netlogon]"/> share
also need to be set along with settings for the profile path, the user's home drive, and so on. This is not
covered in this chapter; for more information please refer to <link linkend="samba-pdc">Domain Control</link>.
Refer to <link linkend="samba-pdc">the Domain Control chapter</link> for specific recommendations for PDC
configuration. Alternately, fully documented working example network configurations using OpenLDAP and Samba
as available in the <ulink url="http://www.samba.org/samba/docs/Samba3-ByExample">book</ulink> <quote>Samba-3
by Example</quote> that may be obtained from local and on-line book stores.
</para>

</sect3>
</sect2>

<sect2>
<title>LDAP Configuration Notes</title>

<para>
<indexterm><primary>LDAP</primary><secondary>master</secondary></indexterm>
<indexterm><primary>LDAP</primary><secondary>slave</secondary></indexterm>
<indexterm><primary>BDC</primary></indexterm>
When configuring a master and a slave LDAP server, it is advisable to use the master LDAP server
for the PDC and slave LDAP servers for the BDCs. It is not essential to use slave LDAP servers; however,
many administrators will want to do so in order to provide redundant services. Of course, one or more BDCs
may use any slave LDAP server. Then again, it is entirely possible to use a single LDAP server for the
entire network.
</para>

<para>
<indexterm><primary>LDAP</primary><secondary>master</secondary></indexterm>
<indexterm><primary>LDAP</primary><secondary>server</secondary></indexterm>
<indexterm><primary>CN</primary></indexterm>
<indexterm><primary>DN</primary></indexterm>
<indexterm><primary>RFC2830</primary></indexterm>
When configuring a master LDAP server that will have slave LDAP servers, do not forget to configure this in
the <filename>/etc/openldap/slapd.conf</filename> file. It must be noted that the DN of a server certificate
must use the CN attribute to name the server, and the CN must carry the servers' fully qualified domain name.
Additional alias names and wildcards may be present in the subjectAltName certificate extension. More details
on server certificate names are in RFC2830.
</para>

<para>
<indexterm><primary>LDAP</primary></indexterm>
<indexterm><primary>BDC</primary></indexterm>
<indexterm><primary>OpenLDAP</primary></indexterm>
<indexterm><primary>transport layer security</primary><see>TLS</see></indexterm>
<indexterm><primary>/etc/ssl/certs/slapd.pem</primary></indexterm>
<indexterm><primary>slapd.pem</primary></indexterm>
<indexterm><primary>Red Hat Linux</primary></indexterm>
It does not really fit within the scope of this document, but a working LDAP installation is basic to
LDAP-enabled Samba operation. When using an OpenLDAP server with Transport Layer Security (TLS), the machine
name in <filename>/etc/ssl/certs/slapd.pem</filename> must be the same as in
<filename>/etc/openldap/sldap.conf</filename>. The Red Hat Linux startup script creates the
<filename>slapd.pem</filename> file with hostname <quote>localhost.localdomain.</quote> It is impossible to
access this LDAP server from a slave LDAP server (i.e., a Samba BDC) unless the certificate is re-created with
a correct hostname.
</para>

<para>
<indexterm><primary>PDC</primary></indexterm>
<indexterm><primary>OpenLDAP</primary></indexterm>
<indexterm><primary>machine account</primary></indexterm>
<indexterm><primary>credentials</primary></indexterm>
<indexterm><primary>replication</primary></indexterm>
<indexterm><primary>duplicate</primary></indexterm>
Do not install a Samba PDC so that is uses an LDAP slave server. Joining client machines to the domain
will fail in this configuration because the change to the machine account in the LDAP tree must take place on
the master LDAP server. This is not replicated rapidly enough to the slave server that the PDC queries. It
therefore gives an error message on the client machine about not being able to set up account credentials. The
machine account is created on the LDAP server, but the password fields will be empty.  Unfortunately, some
sites are unable to avoid such configurations, and these sites should review the <smbconfoption name="ldap
replication sleep"/> parameter, intended to slow down Samba sufficiently for the replication to catch up.
This is a kludge, and one that the administrator must manually duplicate in any scripts (such as the
<smbconfoption name="add machine script"/>) that they use.
</para>

<para>
Possible PDC/BDC plus LDAP configurations include:
</para>

<itemizedlist>
        <listitem><para>
        PDC+BDC -> One Central LDAP Server.
        </para></listitem>
        <listitem><para>
        PDC -> LDAP master server, BDC -> LDAP slave server.
        </para></listitem>
        <listitem><para>
        PDC -> LDAP master, with secondary slave LDAP server.
        </para><para>
        BDC -> LDAP master, with secondary slave LDAP server.
        </para></listitem>
        <listitem><para>
        PDC -> LDAP master, with secondary slave LDAP server.
        </para><para>
        BDC -> LDAP slave server, with secondary master LDAP server.
        </para></listitem>
</itemizedlist>

<para>
In order to have a fallback configuration (secondary) LDAP server, you would specify
the secondary LDAP server in the &smb.conf; file as shown in <link linkend="mulitldapcfg">the Multiple LDAP
Servers in &smb.conf; example</link>.
</para>

<example id="mulitldapcfg">
<title>Multiple LDAP Servers in &smb.conf;</title>
<smbconfblock>
<smbconfoption name="passdb backend">ldapsam:"ldap://master.quenya.org ldap://slave.quenya.org"</smbconfoption>
</smbconfblock>
</example>

</sect2>

<sect2>
<title>Active Directory Domain Control</title>

<para>
<indexterm><primary>MS Windows 2000</primary></indexterm>
<indexterm><primary>Active Directory</primary></indexterm>
<indexterm><primary>directory</primary></indexterm>
<indexterm><primary>replicated</primary></indexterm>
<indexterm><primary>BDC</primary></indexterm>
<indexterm><primary>domain controller</primary></indexterm>
As of the release of MS Windows 2000 and Active Directory, this information is now stored
in a directory that can be replicated and for which partial or full administrative control
can be delegated. Samba-4.0 is able to be a domain controller within an Active Directory
tree, and it can be an Active Directory server.  The details for how
this can be done are documented in the <ulink
url="https://wiki.samba.org/index.php/Samba4/HOWTO">Samba 4.0 as an
AD DC HOWTO</ulink>

</para>

</sect2>

<sect2>
<title>What Qualifies a Domain Controller on the Network?</title>

<para>
<indexterm><primary>DMB</primary></indexterm>
<indexterm><primary>PDC</primary></indexterm>
<indexterm><primary>WINS</primary></indexterm>
<indexterm><primary>NetBIOS</primary></indexterm>
Every machine that is a domain controller for the domain MIDEARTH has to register the NetBIOS
group name MIDEARTH&lt;1C&gt; with the WINS server and/or by broadcast on the local network.
The PDC also registers the unique NetBIOS name MIDEARTH&lt;1B&gt; with the WINS server.
The name type &lt;1B&gt; name is normally reserved for the Domain Master Browser (DMB), a role
that has nothing to do with anything related to authentication, but the Microsoft domain
implementation requires the DMB to be on the same machine as the PDC.
</para>

<para>
<indexterm><primary>broadcast</primary></indexterm>
<indexterm><primary>name registration</primary></indexterm>
<indexterm><primary>SMB/CIFS</primary></indexterm>
Where a WINS server is not used, broadcast name registrations alone must suffice. Refer to
<link linkend="NetworkBrowsing">Network Browsing</link>,<link linkend="netdiscuss">Discussion</link>
for more information regarding TCP/IP network protocols and how SMB/CIFS names are handled.
</para>

</sect2>

<sect2>
<title>How Does a Workstation find its Domain Controller?</title>

<para>
<indexterm><primary>locate domain controller</primary></indexterm>
<indexterm><primary>NetBIOS</primary></indexterm>
There are two different mechanisms to locate a domain controller: one method is used when
NetBIOS over TCP/IP is enabled and the other when it has been disabled in the TCP/IP
network configuration.
</para>

<para>
<indexterm><primary>DNS</primary></indexterm>
<indexterm><primary>broadcast messaging</primary></indexterm>
Where NetBIOS over TCP/IP is disabled, all name resolution involves the use of DNS, broadcast
messaging over UDP, as well as Active Directory communication technologies. In this type of
environment all machines require appropriate DNS entries. More information may be found in
<link linkend="adsdnstech">DNS and Active Directory</link>.
</para>

<sect3>
<title>NetBIOS Over TCP/IP Enabled</title>
<para>
<indexterm><primary>Windows NT4/200x/XP</primary></indexterm>
<indexterm><primary>domain controller</primary></indexterm>
<indexterm><primary>logon requests</primary></indexterm>
<indexterm><primary>credentials validation</primary></indexterm>
An MS Windows NT4/200x/XP Professional workstation in the domain MIDEARTH that wants a
local user to be authenticated has to find the domain controller for MIDEARTH. It does this
by doing a NetBIOS name query for the group name MIDEARTH&lt;1C&gt;. It assumes that each
of the machines it gets back from the queries is a domain controller and can answer logon
requests. To not open security holes, both the workstation and the selected domain controller
authenticate each other. After that the workstation sends the user's credentials (name and
password) to the local domain controller for validation.
</para>

</sect3>

<sect3>
<title>NetBIOS Over TCP/IP Disabled</title>

<para>
<indexterm><primary>realm</primary></indexterm>
<indexterm><primary>logon authentication</primary></indexterm>
<indexterm><primary>DNS</primary></indexterm>
<indexterm><primary>_ldap._tcp.pdc._msdcs.quenya.org</primary></indexterm>
An MS Windows NT4/200x/XP Professional workstation in the realm <constant>quenya.org</constant>
that has a need to affect user logon authentication will locate the domain controller by 
re-querying DNS servers for the <constant>_ldap._tcp.pdc._msdcs.quenya.org</constant> record.
More information regarding this subject may be found in <link linkend="adsdnstech">DNS and Active Directory</link>.
</para>

</sect3>
</sect2>
</sect1>

<sect1>
<title>Backup Domain Controller Configuration</title>

<para>
<indexterm><primary>BDC</primary></indexterm>
The creation of a BDC requires some steps to prepare the Samba server before
&smbd; is executed for the first time. These steps are as follows:
</para>

<itemizedlist>
        <listitem><para>
        <indexterm><primary>secrets.tdb</primary></indexterm>
        <indexterm><primary>smbpasswd</primary></indexterm>
        <indexterm><primary>LDAP administration password</primary></indexterm>
        Specification of the <smbconfoption name="ldap admin dn"/> is obligatory.
        This also requires the LDAP administration password to be set in the <filename>secrets.tdb</filename>
        using the <command>smbpasswd -w <replaceable>mysecret</replaceable></command>.
        </para></listitem>

        <listitem><para>
        The <smbconfoption name="ldap suffix"/> parameter and the <smbconfoption name="ldap idmap suffix"/>
        parameter must be specified in the &smb.conf; file.
        </para></listitem>

        <listitem><para>
        <indexterm><primary>replication</primary><secondary>SAM</secondary></indexterm>
        <indexterm><primary>user database</primary></indexterm>
        <indexterm><primary>synchronized</primary></indexterm>
        <indexterm><primary>NIS</primary></indexterm>
        The UNIX user database has to be synchronized from the PDC to the
        BDC. This means that both the <filename>/etc/passwd</filename> and
        <filename>/etc/group</filename> have to be replicated from the PDC
        to the BDC. This can be done manually whenever changes are made. 
        Alternately, the PDC is set up as an NIS master server and the BDC as an NIS slave
        server. To set up the BDC as a mere NIS client would not be enough,
        as the BDC would not be able to access its user database in case of
        a PDC failure. NIS is by no means the only method to synchronize
        passwords. An LDAP solution would also work.
        </para>
        </listitem>

        <listitem><para>
        <indexterm><primary>password database</primary></indexterm>
        <indexterm><primary>replicated</primary></indexterm>
        <indexterm><primary>PDC</primary></indexterm>
        <indexterm><primary>BDC</primary></indexterm>
        <indexterm><primary>smbpasswd</primary></indexterm>
        <indexterm><primary>rsync</primary></indexterm>
        <indexterm><primary>ssh</primary></indexterm>
        <indexterm><primary>LDAP</primary></indexterm>
        The Samba password database must be replicated from the PDC to the BDC.
        The solution
        is to set up slave LDAP servers for each BDC and a master LDAP server for the PDC.
        The use of rsync is inherently flawed by the fact that the data will be replicated
        at timed intervals. There is no guarantee that the BDC will be operating at all
        times with correct and current machine and user account information. This means that
        this method runs the risk of users being inconvenienced by discontinuity of access
        to network services due to inconsistent security data. It must be born in mind that
        Windows workstations update (change) the machine trust account password at regular
        intervals &smbmdash; administrators are not normally aware that this is happening
        or when it takes place.
        </para>

        <para>
        <indexterm><primary>POSIX</primary></indexterm>
        <indexterm><primary>LDAP</primary></indexterm>
        <indexterm><primary>SambaSAMAccount</primary></indexterm>
        <indexterm><primary>synchronize</primary></indexterm>
        The use of LDAP for both the POSIX (UNIX user and group) accounts and for the
        SambaSAMAccount data automatically ensures that all account change information
        will be written to the shared directory. This eliminates the need for any special
        action to synchronize account information because LDAP will meet that requirement.
        </para></listitem>

        <listitem><para>
        <indexterm><primary>netlogon share</primary></indexterm>
        <indexterm><primary>replicate</primary></indexterm>
        <indexterm><primary>PDC</primary></indexterm>
        <indexterm><primary>BDC</primary></indexterm>
        <indexterm><primary>cron</primary></indexterm>
        <indexterm><primary>rsync</primary></indexterm>
        The netlogon share has to be replicated from the PDC to the BDC. This can be done manually whenever login
        scripts are changed, or it can be done automatically using a <command>cron</command> job that will replicate
        the directory structure in this share using a tool like <command>rsync</command>. The use of
        <command>rsync</command> for replication of the netlogon data is not critical to network security and is one
        that can be manually managed given that the administrator will make all changes to the netlogon share as part
        of a conscious move.
        </para></listitem>

</itemizedlist>

<sect2>
<title>Example Configuration</title>

<para>
Finally, the BDC has to be capable of being found by the workstations. This can be done by configuring the
Samba &smb.conf; file <smbconfsection name="[global]"/> section as shown in <link linkend="minim-bdc">Minimal
Setup for Being a BDC</link>.
</para>

<example id="minim-bdc">
<title>Minimal Setup for Being a BDC</title>
<smbconfblock>
<smbconfoption name="workgroup">&example.workgroup;</smbconfoption>
<smbconfoption name="passdb backend">ldapsam:ldap://slave-ldap.quenya.org</smbconfoption>
<smbconfoption name="domain master">no</smbconfoption>
<smbconfoption name="domain logons">yes</smbconfoption>
<smbconfoption name="ldap suffix">dc=abmas,dc=biz</smbconfoption>
<smbconfoption name="ldap user suffix">ou=Users</smbconfoption>
<smbconfoption name="ldap group suffix">ou=Groups</smbconfoption>
<smbconfoption name="ldap machine suffix">ou=Computers</smbconfoption>
<smbconfoption name="ldap idmap suffix">ou=Idmap</smbconfoption>
<smbconfoption name="ldap admin dn">cn=sambadmin,dc=quenya,dc=org</smbconfoption>
<smbconfoption name="idmap backend">ldap:ldap://master-ldap.quenya.org</smbconfoption>
<smbconfoption name="idmap uid">10000-20000</smbconfoption>
<smbconfoption name="idmap gid">10000-20000</smbconfoption>
</smbconfblock>
</example>

<para>
Fully documented working example network configurations using OpenLDAP and Samba
as available in the <ulink url="http://www.samba.org/samba/docs/Samba3-ByExample">book</ulink> <quote>Samba-3
by Example</quote> that may be obtained from local and on-line book stores.
</para>

<para>
<indexterm><primary>BDC</primary></indexterm>
<indexterm><primary>NetBIOS</primary></indexterm>
<indexterm><primary>group</primary></indexterm>
<indexterm><primary>PDC</primary></indexterm>
This configuration causes the BDC to register only the name MIDEARTH&lt;1C&gt; with the WINS server. This is
not a problem, as the name MIDEARTH&lt;1C&gt; is a NetBIOS group name that is meant to be registered by more
than one machine. The parameter <smbconfoption name="domain master">no</smbconfoption> forces the BDC not to
register MIDEARTH&lt;1B&gt;, which is a unique NetBIOS name that is reserved for the PDC.
</para>

<para>
<indexterm><primary>idmap backend</primary></indexterm>
<indexterm><primary>winbindd</primary></indexterm>
<indexterm><primary>redirect</primary></indexterm>
<indexterm><primary>winbindd</primary></indexterm>
<indexterm><primary>LDAP database</primary></indexterm>
<indexterm><primary>UID</primary></indexterm>
<indexterm><primary>GID</primary></indexterm>
<indexterm><primary>SID</primary></indexterm>
<indexterm><primary>nss_ldap</primary></indexterm>
The <parameter>idmap backend</parameter> will redirect the <command>winbindd</command> utility to use the LDAP
database to store all mappings for Windows SIDs to  UIDs and GIDs for UNIX accounts in a repository that is
shared. The BDC will however depend on local resolution of UIDs and GIDs via NSS and the
<command>nss_ldap</command> utility.
</para>

<note><para>
<indexterm><primary>Server Type</primary><secondary>Domain Member</secondary></indexterm>
<indexterm><primary>ID mapping</primary></indexterm>
<indexterm><primary>domain member server</primary></indexterm>
<indexterm><primary>idmap backend</primary></indexterm>
Samba has introduced a new ID mapping facility. One of the features of this facility is that it
allows greater flexibility in how user and group IDs are handled in respect to NT domain user and group
SIDs. One of the new facilities provides for explicitly ensuring that UNIX/Linux UID and GID values
will be consistent on the PDC, all BDCs, and all domain member servers. The parameter that controls this
is called <parameter>idmap backend</parameter>. Please refer to the man page for &smb.conf; for more information
regarding its behavior.
</para></note>

<para>
<indexterm><primary>BDC</primary></indexterm>
<indexterm><primary>winbindd</primary></indexterm>
<indexterm><primary>domain member servers</primary></indexterm>
The use of the <smbconfoption name="idmap backend">ldap:ldap://master.quenya.org</smbconfoption>
option on a BDC only makes sense where ldapsam is used on a PDC. The purpose of an LDAP-based idmap backend is
also to allow a domain member (without its own passdb backend) to use winbindd to resolve Windows network users
and groups to common UID/GIDs. In other words, this option is generally intended for use on BDCs and on domain
member servers.
</para>

</sect2>
</sect1>

<sect1>
<title>Common Errors</title>

<para>
<indexterm><primary>domain control</primary></indexterm>
Domain control was a new area for Samba, but there are now many examples that we may refer to.
Updated information will be published as they become available and may be found in later Samba releases or
from the Samba Web <ulink url="http://samba.org">site</ulink>; refer in particular to the
<filename>WHATSNEW.txt</filename> in the Samba release tarball. The book, <quote>Samba-3 by Example</quote>
documents well tested and proven configuration examples. You can obtain a copy of this
<ulink url="http://www.samba.org/samba/docs/Samba3-ByExample.pdf">book</ulink> for the Samba web site.
</para>

<sect2>
<title>Machine Accounts Keep Expiring</title>

<para>
<indexterm><primary>Machine Trust Accounts</primary></indexterm>
<indexterm><primary>passdb</primary></indexterm>
<indexterm><primary>SAM</primary></indexterm>
<indexterm><primary>Local Machine Trust Account</primary></indexterm>
This problem will occur when the passdb (SAM) files are copied  from a central
server but the local BDC is acting as a PDC. This results in the application of
Local Machine Trust Account password updates to the local SAM. Such updates 
are not copied back to the central server. The newer machine account password is then
overwritten when the SAM is recopied from the PDC. The result is that the domain member machine
on startup will find that its passwords do not match the one now in the database, and
since the startup security check will now fail, this machine will not allow logon attempts
to proceed and the account expiry error will be reported.
</para>

<para>
The solution is to use a more robust passdb backend, such as the ldapsam backend, setting up
a slave LDAP server for each BDC and a master LDAP server for the PDC.
</para>

</sect2>

<sect2>
<title>Can Samba Be a Backup Domain Controller to an NT4 PDC?</title>

<para>
<indexterm><primary>replication</primary><secondary>SAM</secondary></indexterm>
<indexterm><primary>SAM</primary></indexterm>
No. The native NT4 SAM replication protocols have not yet been fully implemented.
</para>

<para>
<indexterm><primary>BDC</primary></indexterm>
<indexterm><primary>PDC</primary></indexterm>
<indexterm><primary>logon requests</primary></indexterm>
Can I get the benefits of a BDC with Samba?  Yes, but only to a Samba
PDC or as a <ulink
url="https://wiki.samba.org/index.php/Samba4/HOWTO">Samba 4.0 Active
Directory domain controller.</ulink>  The
main reason for implementing a BDC is availability. If the PDC is a Samba
machine, a second Samba machine can be set up to service logon requests whenever
the PDC is down.
</para>

</sect2>

</sect1>
</chapter>