source: trunk/server/source4/libcli/raw/smb.h

Last change on this file was 745, checked in by Silvan Scherrer, 13 years ago

Samba Server: updated trunk to 3.6.0

File size: 23.2 KB
Line 
1/*
2 Unix SMB/CIFS implementation.
3 SMB parameters and setup, plus a whole lot more.
4
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2002
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
9 Copyright (C) Simo Sorce 2001-2002
10 Copyright (C) Martin Pool 2002
11
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 3 of the License, or
15 (at your option) any later version.
16
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
21
22 You should have received a copy of the GNU General Public License
23 along with this program. If not, see <http://www.gnu.org/licenses/>.
24*/
25
26#ifndef _SMB_H
27#define _SMB_H
28
29/* deny modes */
30#define DENY_DOS 0
31#define DENY_ALL 1
32#define DENY_WRITE 2
33#define DENY_READ 3
34#define DENY_NONE 4
35#define DENY_FCB 7
36
37/* open modes */
38#define DOS_OPEN_RDONLY 0
39#define DOS_OPEN_WRONLY 1
40#define DOS_OPEN_RDWR 2
41#define DOS_OPEN_FCB 0xF
42
43
44/**********************************/
45/* SMBopen field definitions */
46#define OPEN_FLAGS_DENY_MASK 0x70
47#define OPEN_FLAGS_DENY_DOS 0x00
48#define OPEN_FLAGS_DENY_ALL 0x10
49#define OPEN_FLAGS_DENY_WRITE 0x20
50#define OPEN_FLAGS_DENY_READ 0x30
51#define OPEN_FLAGS_DENY_NONE 0x40
52
53#define OPEN_FLAGS_MODE_MASK 0x0F
54#define OPEN_FLAGS_OPEN_READ 0
55#define OPEN_FLAGS_OPEN_WRITE 1
56#define OPEN_FLAGS_OPEN_RDWR 2
57#define OPEN_FLAGS_FCB 0xFF
58
59
60/**********************************/
61/* SMBopenX field definitions */
62
63/* OpenX Flags field. */
64#define OPENX_FLAGS_ADDITIONAL_INFO 0x01
65#define OPENX_FLAGS_REQUEST_OPLOCK 0x02
66#define OPENX_FLAGS_REQUEST_BATCH_OPLOCK 0x04
67#define OPENX_FLAGS_EA_LEN 0x08
68#define OPENX_FLAGS_EXTENDED_RETURN 0x10
69
70/* desired access (open_mode), split info 4 4-bit nibbles */
71#define OPENX_MODE_ACCESS_MASK 0x000F
72#define OPENX_MODE_ACCESS_READ 0x0000
73#define OPENX_MODE_ACCESS_WRITE 0x0001
74#define OPENX_MODE_ACCESS_RDWR 0x0002
75#define OPENX_MODE_ACCESS_EXEC 0x0003
76#define OPENX_MODE_ACCESS_FCB 0x000F
77
78#define OPENX_MODE_DENY_SHIFT 4
79#define OPENX_MODE_DENY_MASK (0xF << OPENX_MODE_DENY_SHIFT)
80#define OPENX_MODE_DENY_DOS (DENY_DOS << OPENX_MODE_DENY_SHIFT)
81#define OPENX_MODE_DENY_ALL (DENY_ALL << OPENX_MODE_DENY_SHIFT)
82#define OPENX_MODE_DENY_WRITE (DENY_WRITE << OPENX_MODE_DENY_SHIFT)
83#define OPENX_MODE_DENY_READ (DENY_READ << OPENX_MODE_DENY_SHIFT)
84#define OPENX_MODE_DENY_NONE (DENY_NONE << OPENX_MODE_DENY_SHIFT)
85#define OPENX_MODE_DENY_FCB (0xF << OPENX_MODE_DENY_SHIFT)
86
87#define OPENX_MODE_LOCALITY_MASK 0x0F00 /* what does this do? */
88
89#define OPENX_MODE_NO_CACHE 0x1000
90#define OPENX_MODE_WRITE_THRU 0x4000
91
92/* open function values */
93#define OPENX_OPEN_FUNC_MASK 0x3
94#define OPENX_OPEN_FUNC_FAIL 0x0
95#define OPENX_OPEN_FUNC_OPEN 0x1
96#define OPENX_OPEN_FUNC_TRUNC 0x2
97
98/* The above can be OR'ed with... */
99#define OPENX_OPEN_FUNC_CREATE 0x10
100
101/* openx action in reply */
102#define OPENX_ACTION_EXISTED 1
103#define OPENX_ACTION_CREATED 2
104#define OPENX_ACTION_TRUNCATED 3
105
106
107/**********************************/
108/* SMBntcreateX field definitions */
109
110/* ntcreatex flags field. */
111#define NTCREATEX_FLAGS_REQUEST_OPLOCK 0x02
112#define NTCREATEX_FLAGS_REQUEST_BATCH_OPLOCK 0x04
113#define NTCREATEX_FLAGS_OPEN_DIRECTORY 0x08 /* TODO: opens parent? we need
114 a test suite for this */
115#define NTCREATEX_FLAGS_EXTENDED 0x10
116
117/* the ntcreatex access_mask field
118 this is split into 4 pieces
119 AAAABBBBCCCCCCCCDDDDDDDDDDDDDDDD
120 A -> GENERIC_RIGHT_*
121 B -> SEC_RIGHT_*
122 C -> STD_RIGHT_*
123 D -> SA_RIGHT_*
124
125 which set of SA_RIGHT_* bits is applicable depends on the type
126 of object.
127*/
128
129
130
131/* ntcreatex share_access field */
132#define NTCREATEX_SHARE_ACCESS_NONE 0
133#define NTCREATEX_SHARE_ACCESS_READ 1
134#define NTCREATEX_SHARE_ACCESS_WRITE 2
135#define NTCREATEX_SHARE_ACCESS_DELETE 4
136#define NTCREATEX_SHARE_ACCESS_MASK 7
137
138/* ntcreatex open_disposition field */
139#define NTCREATEX_DISP_SUPERSEDE 0 /* supersede existing file (if it exists) */
140#define NTCREATEX_DISP_OPEN 1 /* if file exists open it, else fail */
141#define NTCREATEX_DISP_CREATE 2 /* if file exists fail, else create it */
142#define NTCREATEX_DISP_OPEN_IF 3 /* if file exists open it, else create it */
143#define NTCREATEX_DISP_OVERWRITE 4 /* if exists overwrite, else fail */
144#define NTCREATEX_DISP_OVERWRITE_IF 5 /* if exists overwrite, else create */
145
146/* ntcreatex create_options field */
147#define NTCREATEX_OPTIONS_DIRECTORY 0x0001
148#define NTCREATEX_OPTIONS_WRITE_THROUGH 0x0002
149#define NTCREATEX_OPTIONS_SEQUENTIAL_ONLY 0x0004
150#define NTCREATEX_OPTIONS_NO_INTERMEDIATE_BUFFERING 0x0008
151#define NTCREATEX_OPTIONS_SYNC_ALERT 0x0010
152#define NTCREATEX_OPTIONS_ASYNC_ALERT 0x0020
153#define NTCREATEX_OPTIONS_NON_DIRECTORY_FILE 0x0040
154#define NTCREATEX_OPTIONS_TREE_CONNECTION 0x0080
155#define NTCREATEX_OPTIONS_COMPLETE_IF_OPLOCKED 0x0100
156#define NTCREATEX_OPTIONS_NO_EA_KNOWLEDGE 0x0200
157#define NTCREATEX_OPTIONS_OPEN_FOR_RECOVERY 0x0400
158#define NTCREATEX_OPTIONS_RANDOM_ACCESS 0x0800
159#define NTCREATEX_OPTIONS_DELETE_ON_CLOSE 0x1000
160#define NTCREATEX_OPTIONS_OPEN_BY_FILE_ID 0x2000
161#define NTCREATEX_OPTIONS_BACKUP_INTENT 0x4000
162#define NTCREATEX_OPTIONS_NO_COMPRESSION 0x8000
163/* Must be ignored by the server, per MS-SMB 2.2.8 */
164#define NTCREATEX_OPTIONS_OPFILTER 0x00100000
165#define NTCREATEX_OPTIONS_REPARSE_POINT 0x00200000
166/* Don't pull this file off tape in a HSM system */
167#define NTCREATEX_OPTIONS_NO_RECALL 0x00400000
168/* Must be ignored by the server, per MS-SMB 2.2.8 */
169#define NTCREATEX_OPTIONS_FREE_SPACE_QUERY 0x00800000
170
171#define NTCREATEX_OPTIONS_MUST_IGNORE_MASK (NTCREATEX_OPTIONS_TREE_CONNECTION | \
172 NTCREATEX_OPTIONS_OPEN_FOR_RECOVERY | \
173 NTCREATEX_OPTIONS_FREE_SPACE_QUERY | \
174 0x000F0000)
175
176#define NTCREATEX_OPTIONS_NOT_SUPPORTED_MASK (NTCREATEX_OPTIONS_OPEN_BY_FILE_ID)
177
178#define NTCREATEX_OPTIONS_INVALID_PARAM_MASK (NTCREATEX_OPTIONS_OPFILTER | \
179 NTCREATEX_OPTIONS_SYNC_ALERT | \
180 NTCREATEX_OPTIONS_ASYNC_ALERT | \
181 0xFF000000)
182
183/*
184 * private_flags field in ntcreatex
185 * This values have different meaning for some ntvfs backends.
186 */
187#define NTCREATEX_OPTIONS_PRIVATE_DENY_DOS 0x0001
188#define NTCREATEX_OPTIONS_PRIVATE_DENY_FCB 0x0002
189
190
191/* ntcreatex impersonation field */
192#define NTCREATEX_IMPERSONATION_ANONYMOUS 0
193#define NTCREATEX_IMPERSONATION_IDENTIFICATION 1
194#define NTCREATEX_IMPERSONATION_IMPERSONATION 2
195#define NTCREATEX_IMPERSONATION_DELEGATION 3
196
197/* ntcreatex security flags bit field */
198#define NTCREATEX_SECURITY_DYNAMIC 1
199#define NTCREATEX_SECURITY_ALL 2
200
201/* ntcreatex create_action in reply */
202#define NTCREATEX_ACTION_EXISTED 1
203#define NTCREATEX_ACTION_CREATED 2
204#define NTCREATEX_ACTION_TRUNCATED 3
205/* the value 5 can also be returned when you try to create a directory with
206 incorrect parameters - what does it mean? maybe created temporary file? */
207#define NTCREATEX_ACTION_UNKNOWN 5
208
209#define SMB_MAGIC 0x424D53FF /* 0xFF 'S' 'M' 'B' */
210
211/* the basic packet size, assuming no words or bytes. Does not include the NBT header */
212#define MIN_SMB_SIZE 35
213
214/* when using NBT encapsulation every packet has a 4 byte header */
215#define NBT_HDR_SIZE 4
216
217/* offsets into message header for common items - NOTE: These have
218 changed from being offsets from the base of the NBT packet to the base of the SMB packet.
219 this has reduced all these values by 4
220*/
221#define HDR_COM 4
222#define HDR_RCLS 5
223#define HDR_REH 6
224#define HDR_ERR 7
225#define HDR_FLG 9
226#define HDR_FLG2 10
227#define HDR_PIDHIGH 12
228#define HDR_SS_FIELD 14
229#define HDR_TID 24
230#define HDR_PID 26
231#define HDR_UID 28
232#define HDR_MID 30
233#define HDR_WCT 32
234#define HDR_VWV 33
235
236
237/* types of buffers in core SMB protocol */
238#define SMB_DATA_BLOCK 0x1
239#define SMB_ASCII4 0x4
240
241
242/* flag defines. CIFS spec 3.1.1 */
243#define FLAG_SUPPORT_LOCKREAD 0x01
244#define FLAG_CLIENT_BUF_AVAIL 0x02
245#define FLAG_RESERVED 0x04
246#define FLAG_CASELESS_PATHNAMES 0x08
247#define FLAG_CANONICAL_PATHNAMES 0x10
248#define FLAG_REQUEST_OPLOCK 0x20
249#define FLAG_REQUEST_BATCH_OPLOCK 0x40
250#define FLAG_REPLY 0x80
251
252/* the complete */
253#define SMBmkdir 0x00 /* create directory */
254#define SMBrmdir 0x01 /* delete directory */
255#define SMBopen 0x02 /* open file */
256#define SMBcreate 0x03 /* create file */
257#define SMBclose 0x04 /* close file */
258#define SMBflush 0x05 /* flush file */
259#define SMBunlink 0x06 /* delete file */
260#define SMBmv 0x07 /* rename file */
261#define SMBgetatr 0x08 /* get file attributes */
262#define SMBsetatr 0x09 /* set file attributes */
263#define SMBread 0x0A /* read from file */
264#define SMBwrite 0x0B /* write to file */
265#define SMBlock 0x0C /* lock byte range */
266#define SMBunlock 0x0D /* unlock byte range */
267#define SMBctemp 0x0E /* create temporary file */
268#define SMBmknew 0x0F /* make new file */
269#define SMBchkpth 0x10 /* check directory path */
270#define SMBexit 0x11 /* process exit */
271#define SMBlseek 0x12 /* seek */
272#define SMBtcon 0x70 /* tree connect */
273#define SMBtconX 0x75 /* tree connect and X*/
274#define SMBtdis 0x71 /* tree disconnect */
275#define SMBnegprot 0x72 /* negotiate protocol */
276#define SMBdskattr 0x80 /* get disk attributes */
277#define SMBsearch 0x81 /* search directory */
278#define SMBsplopen 0xC0 /* open print spool file */
279#define SMBsplwr 0xC1 /* write to print spool file */
280#define SMBsplclose 0xC2 /* close print spool file */
281#define SMBsplretq 0xC3 /* return print queue */
282#define SMBsends 0xD0 /* send single block message */
283#define SMBsendb 0xD1 /* send broadcast message */
284#define SMBfwdname 0xD2 /* forward user name */
285#define SMBcancelf 0xD3 /* cancel forward */
286#define SMBgetmac 0xD4 /* get machine name */
287#define SMBsendstrt 0xD5 /* send start of multi-block message */
288#define SMBsendend 0xD6 /* send end of multi-block message */
289#define SMBsendtxt 0xD7 /* send text of multi-block message */
290
291/* Core+ protocol */
292#define SMBlockread 0x13 /* Lock a range and read */
293#define SMBwriteunlock 0x14 /* write then range then unlock it */
294#define SMBreadbraw 0x1a /* read a block of data with no smb header */
295#define SMBwritebraw 0x1d /* write a block of data with no smb header */
296#define SMBwritec 0x20 /* secondary write request */
297#define SMBwriteclose 0x2c /* write a file then close it */
298
299/* dos extended protocol */
300#define SMBreadBraw 0x1A /* read block raw */
301#define SMBreadBmpx 0x1B /* read block multiplexed */
302#define SMBreadBs 0x1C /* read block (secondary response) */
303#define SMBwriteBraw 0x1D /* write block raw */
304#define SMBwriteBmpx 0x1E /* write block multiplexed */
305#define SMBwriteBs 0x1F /* write block (secondary request) */
306#define SMBwriteC 0x20 /* write complete response */
307#define SMBsetattrE 0x22 /* set file attributes expanded */
308#define SMBgetattrE 0x23 /* get file attributes expanded */
309#define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
310#define SMBtrans 0x25 /* transaction - name, bytes in/out */
311#define SMBtranss 0x26 /* transaction (secondary request/response) */
312#define SMBioctl 0x27 /* IOCTL */
313#define SMBioctls 0x28 /* IOCTL (secondary request/response) */
314#define SMBcopy 0x29 /* copy */
315#define SMBmove 0x2A /* move */
316#define SMBecho 0x2B /* echo */
317#define SMBopenX 0x2D /* open and X */
318#define SMBreadX 0x2E /* read and X */
319#define SMBwriteX 0x2F /* write and X */
320#define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
321#define SMBffirst 0x82 /* find first */
322#define SMBfunique 0x83 /* find unique */
323#define SMBfclose 0x84 /* find close */
324#define SMBkeepalive 0x85 /* keepalive */
325#define SMBinvalid 0xFE /* invalid command */
326
327/* Extended 2.0 protocol */
328#define SMBtrans2 0x32 /* TRANS2 protocol set */
329#define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
330#define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
331#define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
332#define SMBulogoffX 0x74 /* user logoff */
333
334/* NT SMB extensions. */
335#define SMBnttrans 0xA0 /* NT transact */
336#define SMBnttranss 0xA1 /* NT transact secondary */
337#define SMBntcreateX 0xA2 /* NT create and X */
338#define SMBntcancel 0xA4 /* NT cancel */
339#define SMBntrename 0xA5 /* NT rename */
340
341/* used to indicate end of chain */
342#define SMB_CHAIN_NONE 0xFF
343
344/* These are the trans subcommands */
345#define TRANSACT_SETNAMEDPIPEHANDLESTATE 0x01
346#define TRANSACT_DCERPCCMD 0x26
347#define TRANSACT_WAITNAMEDPIPEHANDLESTATE 0x53
348
349/* These are the NT transact sub commands. */
350#define NT_TRANSACT_CREATE 1
351#define NT_TRANSACT_IOCTL 2
352#define NT_TRANSACT_SET_SECURITY_DESC 3
353#define NT_TRANSACT_NOTIFY_CHANGE 4
354#define NT_TRANSACT_RENAME 5
355#define NT_TRANSACT_QUERY_SECURITY_DESC 6
356
357/* this is used on a TConX. I'm not sure the name is very helpful though */
358#define SMB_SUPPORT_SEARCH_BITS 0x0001
359#define SMB_SHARE_IN_DFS 0x0002
360
361/* Named pipe write mode flags. Used in writeX calls. */
362#define PIPE_RAW_MODE 0x4
363#define PIPE_START_MESSAGE 0x8
364
365/* the desired access to use when opening a pipe */
366#define DESIRED_ACCESS_PIPE 0x2019f
367
368
369/* FileAttributes (search attributes) field */
370#define FILE_ATTRIBUTE_READONLY 0x0001
371#define FILE_ATTRIBUTE_HIDDEN 0x0002
372#define FILE_ATTRIBUTE_SYSTEM 0x0004
373#define FILE_ATTRIBUTE_VOLUME 0x0008
374#define FILE_ATTRIBUTE_DIRECTORY 0x0010
375#define FILE_ATTRIBUTE_ARCHIVE 0x0020
376#define FILE_ATTRIBUTE_DEVICE 0x0040
377#define FILE_ATTRIBUTE_NORMAL 0x0080
378#define FILE_ATTRIBUTE_TEMPORARY 0x0100
379#define FILE_ATTRIBUTE_SPARSE 0x0200
380#define FILE_ATTRIBUTE_REPARSE_POINT 0x0400
381#define FILE_ATTRIBUTE_COMPRESSED 0x0800
382#define FILE_ATTRIBUTE_OFFLINE 0x1000
383#define FILE_ATTRIBUTE_NONINDEXED 0x2000
384#define FILE_ATTRIBUTE_ENCRYPTED 0x4000
385#define FILE_ATTRIBUTE_ALL_MASK 0x7FFF
386
387/* Flags - combined with attributes. */
388#define FILE_FLAG_WRITE_THROUGH 0x80000000L
389#define FILE_FLAG_NO_BUFFERING 0x20000000L
390#define FILE_FLAG_RANDOM_ACCESS 0x10000000L
391#define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
392#define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
393#define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L /* only if backup/restore privilege? */
394#define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
395
396/* Responses when opening a file. */
397#define FILE_WAS_SUPERSEDED 0
398#define FILE_WAS_OPENED 1
399#define FILE_WAS_CREATED 2
400#define FILE_WAS_OVERWRITTEN 3
401
402/* File type flags */
403#define FILE_TYPE_DISK 0
404#define FILE_TYPE_BYTE_MODE_PIPE 1
405#define FILE_TYPE_MESSAGE_MODE_PIPE 2
406#define FILE_TYPE_PRINTER 3
407#define FILE_TYPE_COMM_DEVICE 4
408#define FILE_TYPE_UNKNOWN 0xFFFF
409
410/* Flag for NT transact rename call. */
411#define RENAME_REPLACE_IF_EXISTS 1
412
413/* flags for SMBntrename call */
414#define RENAME_FLAG_MOVE_CLUSTER_INFORMATION 0x102 /* ???? */
415#define RENAME_FLAG_HARD_LINK 0x103
416#define RENAME_FLAG_RENAME 0x104
417#define RENAME_FLAG_COPY 0x105
418
419/* Filesystem Attributes. */
420#define FILE_CASE_SENSITIVE_SEARCH 0x01
421#define FILE_CASE_PRESERVED_NAMES 0x02
422#define FILE_UNICODE_ON_DISK 0x04
423/* According to cifs9f, this is 4, not 8 */
424/* Acconding to testing, this actually sets the security attribute! */
425#define FILE_PERSISTENT_ACLS 0x08
426/* These entries added from cifs9f --tsb */
427#define FILE_FILE_COMPRESSION 0x10
428#define FILE_VOLUME_QUOTAS 0x20
429/* I think this is wrong. JRA #define FILE_DEVICE_IS_MOUNTED 0x20 */
430#define FILE_VOLUME_SPARSE_FILE 0x40
431#define FILE_VOLUME_IS_COMPRESSED 0x8000
432
433/* ChangeNotify flags. */
434#define FILE_NOTIFY_CHANGE_FILE_NAME 0x00000001
435#define FILE_NOTIFY_CHANGE_DIR_NAME 0x00000002
436#define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x00000004
437#define FILE_NOTIFY_CHANGE_SIZE 0x00000008
438#define FILE_NOTIFY_CHANGE_LAST_WRITE 0x00000010
439#define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x00000020
440#define FILE_NOTIFY_CHANGE_CREATION 0x00000040
441#define FILE_NOTIFY_CHANGE_EA 0x00000080
442#define FILE_NOTIFY_CHANGE_SECURITY 0x00000100
443#define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200
444#define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400
445#define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800
446
447#define FILE_NOTIFY_CHANGE_NAME \
448 (FILE_NOTIFY_CHANGE_FILE_NAME|FILE_NOTIFY_CHANGE_DIR_NAME)
449
450#define FILE_NOTIFY_CHANGE_ALL \
451 (FILE_NOTIFY_CHANGE_FILE_NAME | FILE_NOTIFY_CHANGE_DIR_NAME | \
452 FILE_NOTIFY_CHANGE_ATTRIBUTES | FILE_NOTIFY_CHANGE_SIZE | \
453 FILE_NOTIFY_CHANGE_LAST_WRITE | FILE_NOTIFY_CHANGE_LAST_ACCESS | \
454 FILE_NOTIFY_CHANGE_CREATION | FILE_NOTIFY_CHANGE_EA | \
455 FILE_NOTIFY_CHANGE_SECURITY | FILE_NOTIFY_CHANGE_STREAM_NAME | \
456 FILE_NOTIFY_CHANGE_STREAM_SIZE | FILE_NOTIFY_CHANGE_STREAM_WRITE)
457
458/* change notify action results */
459#define NOTIFY_ACTION_ADDED 1
460#define NOTIFY_ACTION_REMOVED 2
461#define NOTIFY_ACTION_MODIFIED 3
462#define NOTIFY_ACTION_OLD_NAME 4
463#define NOTIFY_ACTION_NEW_NAME 5
464#define NOTIFY_ACTION_ADDED_STREAM 6
465#define NOTIFY_ACTION_REMOVED_STREAM 7
466#define NOTIFY_ACTION_MODIFIED_STREAM 8
467
468/* seek modes for smb_seek */
469#define SEEK_MODE_START 0
470#define SEEK_MODE_CURRENT 1
471#define SEEK_MODE_END 2
472
473/* where to find the base of the SMB packet proper */
474/* REWRITE TODO: smb_base needs to be removed */
475#define smb_base(buf) (((char *)(buf))+4)
476
477/* we don't allow server strings to be longer than 48 characters as
478 otherwise NT will not honour the announce packets */
479#define MAX_SERVER_STRING_LENGTH 48
480
481/* This was set by JHT in liaison with Jeremy Allison early 1997
482 * History:
483 * Version 4.0 - never made public
484 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
485 * - Reappeared in 1.9.16p11 with fixed smbd services
486 * Version 4.20 - To indicate that nmbd and browsing now works better
487 * Version 4.50 - Set at release of samba-2.2.0 by JHT
488 *
489 * Note: In the presence of NT4.X do not set above 4.9
490 * Setting this above 4.9 can have undesired side-effects.
491 * This may change again in Samba-3.0 after further testing. JHT
492 */
493
494#define DEFAULT_MAJOR_VERSION 0x04
495#define DEFAULT_MINOR_VERSION 0x09
496
497/* Browser Election Values */
498#define BROWSER_ELECTION_VERSION 0x010f
499#define BROWSER_CONSTANT 0xaa55
500
501/* Sercurity mode bits. */
502#define NEGOTIATE_SECURITY_USER_LEVEL 0x01
503#define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02
504#define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
505#define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
506
507/* NT Flags2 bits - cifs6.txt section 3.1.2 */
508#define FLAGS2_LONG_PATH_COMPONENTS 0x0001
509#define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
510#define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004
511#define FLAGS2_IS_LONG_NAME 0x0040
512#define FLAGS2_EXTENDED_SECURITY 0x0800
513#define FLAGS2_DFS_PATHNAMES 0x1000
514#define FLAGS2_READ_PERMIT_EXECUTE 0x2000
515#define FLAGS2_32_BIT_ERROR_CODES 0x4000
516#define FLAGS2_UNICODE_STRINGS 0x8000
517
518
519/* CIFS protocol capabilities */
520#define CAP_RAW_MODE 0x00000001
521#define CAP_MPX_MODE 0x00000002
522#define CAP_UNICODE 0x00000004
523#define CAP_LARGE_FILES 0x00000008
524#define CAP_NT_SMBS 0x00000010
525#define CAP_RPC_REMOTE_APIS 0x00000020
526#define CAP_STATUS32 0x00000040
527#define CAP_LEVEL_II_OPLOCKS 0x00000080
528#define CAP_LOCK_AND_READ 0x00000100
529#define CAP_NT_FIND 0x00000200
530#define CAP_DFS 0x00001000
531#define CAP_W2K_SMBS 0x00002000
532#define CAP_LARGE_READX 0x00004000
533#define CAP_LARGE_WRITEX 0x00008000
534#define CAP_UNIX 0x00800000 /* Capabilities for UNIX extensions. Created by HP. */
535#define CAP_EXTENDED_SECURITY 0x80000000
536
537/*
538 * Global value meaning that the smb_uid field should be
539 * ingored (in share level security and protocol level == CORE)
540 */
541
542#define UID_FIELD_INVALID 0
543
544/* Lock types. */
545#define LOCKING_ANDX_EXCLUSIVE_LOCK 0x00
546#define LOCKING_ANDX_SHARED_LOCK 0x01
547#define LOCKING_ANDX_OPLOCK_RELEASE 0x02
548#define LOCKING_ANDX_CHANGE_LOCKTYPE 0x04
549#define LOCKING_ANDX_CANCEL_LOCK 0x08
550#define LOCKING_ANDX_LARGE_FILES 0x10
551
552/*
553 * Bits we test with.
554 */
555
556#define OPLOCK_NONE 0
557#define OPLOCK_EXCLUSIVE 1
558#define OPLOCK_BATCH 2
559#define OPLOCK_LEVEL_II 4
560
561#define CORE_OPLOCK_GRANTED (1<<5)
562#define EXTENDED_OPLOCK_GRANTED (1<<15)
563
564/*
565 * Return values for oplock types.
566 */
567
568#define NO_OPLOCK_RETURN 0
569#define EXCLUSIVE_OPLOCK_RETURN 1
570#define BATCH_OPLOCK_RETURN 2
571#define LEVEL_II_OPLOCK_RETURN 3
572
573/* oplock levels sent in oplock break */
574#define OPLOCK_BREAK_TO_NONE 0
575#define OPLOCK_BREAK_TO_LEVEL_II 1
576
577
578#define CMD_REPLY 0x8000
579
580/* The maximum length of a trust account password.
581 Used when we randomly create it, 15 char passwords
582 exceed NT4's max password length */
583
584#define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14
585
586
587/*
588 filesystem attribute bits
589*/
590#define FS_ATTR_CASE_SENSITIVE_SEARCH 0x00000001
591#define FS_ATTR_CASE_PRESERVED_NAMES 0x00000002
592#define FS_ATTR_UNICODE_ON_DISK 0x00000004
593#define FS_ATTR_PERSISTANT_ACLS 0x00000008
594#define FS_ATTR_COMPRESSION 0x00000010
595#define FS_ATTR_QUOTAS 0x00000020
596#define FS_ATTR_SPARSE_FILES 0x00000040
597#define FS_ATTR_REPARSE_POINTS 0x00000080
598#define FS_ATTR_REMOTE_STORAGE 0x00000100
599#define FS_ATTR_LFN_SUPPORT 0x00004000
600#define FS_ATTR_IS_COMPRESSED 0x00008000
601#define FS_ATTR_OBJECT_IDS 0x00010000
602#define FS_ATTR_ENCRYPTION 0x00020000
603#define FS_ATTR_NAMED_STREAMS 0x00040000
604
605#define smb_len(buf) (PVAL(buf,3)|(PVAL(buf,2)<<8)|(PVAL(buf,1)<<16))
606#define _smb_setlen(buf,len) do {(buf)[0] = 0; (buf)[1] = ((len)&0x10000)>>16; \
607 (buf)[2] = ((len)&0xFF00)>>8; (buf)[3] = (len)&0xFF;} while (0)
608#define _smb2_setlen(buf,len) do {(buf)[0] = 0; (buf)[1] = ((len)&0xFF0000)>>16; \
609 (buf)[2] = ((len)&0xFF00)>>8; (buf)[3] = (len)&0xFF;} while (0)
610
611#include "libcli/raw/trans2.h"
612#include "libcli/raw/interfaces.h"
613
614#endif /* _SMB_H */
Note: See TracBrowser for help on using the repository browser.