source: branches/samba-3.3.x/docs-xml/manpages-3/smbclient.1.xml@ 622

Last change on this file since 622 was 217, checked in by Herwig Bauernfeind, 16 years ago

Import Samba 3.3 branch at 3.3.0 level docs-xml (psmedley's port)
File size: 44.4 KB
Line 
1<?xml version="1.0" encoding="iso-8859-1"?>
2<!DOCTYPE refentry PUBLIC "-//Samba-Team//DTD DocBook V4.2-Based Variant V1.0//EN" "http://www.samba.org/samba/DTD/samba-doc">
3<refentry id="smbclient.1">
4
5<refmeta>
6 <refentrytitle>smbclient</refentrytitle>
7 <manvolnum>1</manvolnum>
8 <refmiscinfo class="source">Samba</refmiscinfo>
9 <refmiscinfo class="manual">User Commands</refmiscinfo>
10 <refmiscinfo class="version">3.3</refmiscinfo>
11</refmeta>
12
13
14<refnamediv>
15 <refname>smbclient</refname>
16 <refpurpose>ftp-like client to access SMB/CIFS resources
17 on servers</refpurpose>
18</refnamediv>
19
20<refsynopsisdiv>
21 <cmdsynopsis>
22 <command>smbclient</command>
23 <arg choice="opt">-b &lt;buffer size&gt;</arg>
24 <arg choice="opt">-d debuglevel</arg>
25 <arg choice="opt">-e</arg>
26 <arg choice="opt">-L &lt;netbios name&gt;</arg>
27 <arg choice="opt">-U username</arg>
28 <arg choice="opt">-I destinationIP</arg>
29 <arg choice="opt">-M &lt;netbios name&gt;</arg>
30 <arg choice="opt">-m maxprotocol</arg>
31 <arg choice="opt">-A authfile</arg>
32 <arg choice="opt">-N</arg>
33 <arg choice="opt">-g</arg>
34 <arg choice="opt">-i scope</arg>
35 <arg choice="opt">-O &lt;socket options&gt;</arg>
36 <arg choice="opt">-p port</arg>
37 <arg choice="opt">-R &lt;name resolve order&gt;</arg>
38 <arg choice="opt">-s &lt;smb config file&gt;</arg>
39 <arg choice="opt">-k</arg>
40 <arg choice="opt">-P</arg>
41 <arg choice="opt">-c &lt;command&gt;</arg>
42 </cmdsynopsis>
43
44 <cmdsynopsis>
45 <command>smbclient</command>
46 <arg choice="req">servicename</arg>
47 <arg choice="opt">password</arg>
48 <arg choice="opt">-b &lt;buffer size&gt;</arg>
49 <arg choice="opt">-d debuglevel</arg>
50 <arg choice="opt">-e</arg>
51 <arg choice="opt">-D Directory</arg>
52 <arg choice="opt">-U username</arg>
53 <arg choice="opt">-W workgroup</arg>
54 <arg choice="opt">-M &lt;netbios name&gt;</arg>
55 <arg choice="opt">-m maxprotocol</arg>
56 <arg choice="opt">-A authfile</arg>
57 <arg choice="opt">-N</arg>
58 <arg choice="opt">-g</arg>
59 <arg choice="opt">-l log-basename</arg>
60 <arg choice="opt">-I destinationIP</arg>
61 <arg choice="opt">-E</arg>
62 <arg choice="opt">-c &lt;command string&gt;</arg>
63 <arg choice="opt">-i scope</arg>
64 <arg choice="opt">-O &lt;socket options&gt;</arg>
65 <arg choice="opt">-p port</arg>
66 <arg choice="opt">-R &lt;name resolve order&gt;</arg>
67 <arg choice="opt">-s &lt;smb config file&gt;</arg>
68 <arg choice="opt">-T&lt;c|x&gt;IXFqgbNan</arg>
69 <arg choice="opt">-k</arg>
70 </cmdsynopsis>
71</refsynopsisdiv>
72
73<refsect1>
74 <title>DESCRIPTION</title>
75
76 <para>This tool is part of the <citerefentry><refentrytitle>samba</refentrytitle>
77 <manvolnum>7</manvolnum></citerefentry> suite.</para>
78
79 <para><command>smbclient</command> is a client that can
80 'talk' to an SMB/CIFS server. It offers an interface
81 similar to that of the ftp program (see <citerefentry><refentrytitle>ftp</refentrytitle>
82 <manvolnum>1</manvolnum></citerefentry>).
83 Operations include things like getting files from the server
84 to the local machine, putting files from the local machine to
85 the server, retrieving directory information from the server
86 and so on. </para>
87</refsect1>
88
89
90<refsect1>
91 <title>OPTIONS</title>
92
93 <variablelist>
94 <varlistentry>
95 <term>servicename</term>
96 <listitem><para>servicename is the name of the service
97 you want to use on the server. A service name takes the form
98 <filename>//server/service</filename> where <parameter>server
99 </parameter> is the NetBIOS name of the SMB/CIFS server
100 offering the desired service and <parameter>service</parameter>
101 is the name of the service offered. Thus to connect to
102 the service "printer" on the SMB/CIFS server "smbserver",
103 you would use the servicename <filename>//smbserver/printer
104 </filename></para>
105
106 <para>Note that the server name required is NOT necessarily
107 the IP (DNS) host name of the server ! The name required is
108 a NetBIOS server name, which may or may not be the
109 same as the IP hostname of the machine running the server.
110 </para>
111
112 <para>The server name is looked up according to either
113 the <parameter>-R</parameter> parameter to <command>smbclient</command> or
114 using the name resolve order parameter in
115 the <citerefentry><refentrytitle>smb.conf</refentrytitle>
116 <manvolnum>5</manvolnum></citerefentry> file,
117 allowing an administrator to change the order and methods
118 by which server names are looked up. </para></listitem>
119 </varlistentry>
120
121 <varlistentry>
122 <term>password</term>
123 <listitem><para>The password required to access the specified
124 service on the specified server. If this parameter is
125 supplied, the <parameter>-N</parameter> option (suppress
126 password prompt) is assumed. </para>
127
128 <para>There is no default password. If no password is supplied
129 on the command line (either by using this parameter or adding
130 a password to the <parameter>-U</parameter> option (see
131 below)) and the <parameter>-N</parameter> option is not
132 specified, the client will prompt for a password, even if
133 the desired service does not require one. (If no password is
134 required, simply press ENTER to provide a null password.)
135 </para>
136
137 <para>Note: Some servers (including OS/2 and Windows for
138 Workgroups) insist on an uppercase password. Lowercase
139 or mixed case passwords may be rejected by these servers.
140 </para>
141
142 <para>Be cautious about including passwords in scripts.
143 </para></listitem>
144 </varlistentry>
145
146 <varlistentry>
147 <term>-R &lt;name resolve order&gt;</term>
148 <listitem><para>This option is used by the programs in the Samba
149 suite to determine what naming services and in what order to resolve
150 host names to IP addresses. The option takes a space-separated
151 string of different name resolution options.</para>
152
153 <para>The options are :"lmhosts", "host", "wins" and "bcast". They
154 cause names to be resolved as follows:</para>
155
156 <itemizedlist>
157 <listitem><para><constant>lmhosts</constant>: Lookup an IP
158 address in the Samba lmhosts file. If the line in lmhosts has
159 no name type attached to the NetBIOS name (see
160 the <citerefentry><refentrytitle>lmhosts</refentrytitle>
161 <manvolnum>5</manvolnum></citerefentry> for details) then
162 any name type matches for lookup.</para>
163 </listitem>
164
165 <listitem><para><constant>host</constant>: Do a standard host
166 name to IP address resolution, using the system <filename>/etc/hosts
167 </filename>, NIS, or DNS lookups. This method of name resolution
168 is operating system dependent, for instance on IRIX or Solaris this
169 may be controlled by the <filename>/etc/nsswitch.conf</filename>
170 file). Note that this method is only used if the NetBIOS name
171 type being queried is the 0x20 (server) name type, otherwise
172 it is ignored.</para>
173 </listitem>
174
175 <listitem><para><constant>wins</constant>: Query a name with
176 the IP address listed in the <parameter>wins server</parameter>
177 parameter. If no WINS server has
178 been specified this method will be ignored.</para>
179 </listitem>
180
181 <listitem><para><constant>bcast</constant>: Do a broadcast on
182 each of the known local interfaces listed in the
183 <parameter>interfaces</parameter>
184 parameter. This is the least reliable of the name resolution
185 methods as it depends on the target host being on a locally
186 connected subnet.</para>
187 </listitem>
188 </itemizedlist>
189
190 <para>If this parameter is not set then the name resolve order
191 defined in the <citerefentry><refentrytitle>smb.conf</refentrytitle>
192 <manvolnum>5</manvolnum></citerefentry> file parameter
193 (name resolve order) will be used. </para>
194
195 <para>The default order is lmhosts, host, wins, bcast and without
196 this parameter or any entry in the <parameter>name resolve order
197 </parameter> parameter of the <citerefentry><refentrytitle>smb.conf</refentrytitle>
198 <manvolnum>5</manvolnum></citerefentry> file the name resolution
199 methods will be attempted in this order. </para></listitem>
200 </varlistentry>
201
202
203 <varlistentry>
204 <term>-M NetBIOS name</term>
205 <listitem><para>This options allows you to send messages, using
206 the "WinPopup" protocol, to another computer. Once a connection is
207 established you then type your message, pressing ^D (control-D) to
208 end. </para>
209
210 <para>If the receiving computer is running WinPopup the user will
211 receive the message and probably a beep. If they are not running
212 WinPopup the message will be lost, and no error message will
213 occur. </para>
214
215 <para>The message is also automatically truncated if the message
216 is over 1600 bytes, as this is the limit of the protocol.
217 </para>
218
219 <para>
220 One useful trick is to pipe the message through <command>smbclient</command>.
221 For example: smbclient -M FRED &lt; mymessage.txt will send the
222 message in the file <filename>mymessage.txt</filename> to the
223 machine FRED.
224 </para>
225
226 <para>You may also find the <parameter>-U</parameter> and
227 <parameter>-I</parameter> options useful, as they allow you to
228 control the FROM and TO parts of the message. </para>
229
230 <para>See the <parameter>message command</parameter> parameter in the <citerefentry><refentrytitle>smb.conf</refentrytitle>
231 <manvolnum>5</manvolnum></citerefentry> for a description of how to handle incoming
232 WinPopup messages in Samba. </para>
233
234 <para><emphasis>Note</emphasis>: Copy WinPopup into the startup group
235 on your WfWg PCs if you want them to always be able to receive
236 messages. </para></listitem>
237 </varlistentry>
238
239 <varlistentry>
240 <term>-p port</term>
241 <listitem><para>This number is the TCP port number that will be used
242 when making connections to the server. The standard (well-known)
243 TCP port number for an SMB/CIFS server is 139, which is the
244 default. </para></listitem>
245 </varlistentry>
246
247 <varlistentry>
248 <term>-g</term>
249 <listitem><para>This parameter provides combined with
250 <parameter>-L</parameter> easy parseable output that allows processing
251 with utilities such as grep and cut.
252 </para></listitem>
253 </varlistentry>
254
255 <varlistentry>
256 <term>-P</term>
257 <listitem><para>
258 Make queries to the external server using the machine account of the local server.
259 </para></listitem>
260 </varlistentry>
261
262 &stdarg.help;
263
264 <varlistentry>
265 <term>-I IP-address</term>
266 <listitem><para><replaceable>IP address</replaceable> is the address of the server to connect to.
267 It should be specified in standard "a.b.c.d" notation. </para>
268
269 <para>Normally the client would attempt to locate a named
270 SMB/CIFS server by looking it up via the NetBIOS name resolution
271 mechanism described above in the <parameter>name resolve order</parameter>
272 parameter above. Using this parameter will force the client
273 to assume that the server is on the machine with the specified IP
274 address and the NetBIOS name component of the resource being
275 connected to will be ignored. </para>
276
277 <para>There is no default for this parameter. If not supplied,
278 it will be determined automatically by the client as described
279 above. </para></listitem>
280 </varlistentry>
281
282 <varlistentry>
283 <term>-E</term>
284 <listitem><para>This parameter causes the client to write messages
285 to the standard error stream (stderr) rather than to the standard
286 output stream. </para>
287
288 <para>By default, the client writes messages to standard output
289 - typically the user's tty. </para></listitem>
290 </varlistentry>
291
292 <varlistentry>
293 <term>-L</term>
294 <listitem><para>This option allows you to look at what services
295 are available on a server. You use it as <command>smbclient -L
296 host</command> and a list should appear. The <parameter>-I
297 </parameter> option may be useful if your NetBIOS names don't
298 match your TCP/IP DNS host names or if you are trying to reach a
299 host on another network. </para></listitem>
300 </varlistentry>
301
302 <varlistentry>
303 <term>-t terminal code</term>
304 <listitem><para>This option tells <command>smbclient</command> how to interpret
305 filenames coming from the remote server. Usually Asian language
306 multibyte UNIX implementations use different character sets than
307 SMB/CIFS servers (<emphasis>EUC</emphasis> instead of <emphasis>
308 SJIS</emphasis> for example). Setting this parameter will let
309 <command>smbclient</command> convert between the UNIX filenames and
310 the SMB filenames correctly. This option has not been seriously tested
311 and may have some problems. </para>
312
313 <para>The terminal codes include CWsjis, CWeuc, CWjis7, CWjis8,
314 CWjunet, CWhex, CWcap. This is not a complete list, check the Samba
315 source code for the complete list. </para></listitem>
316 </varlistentry>
317
318 <varlistentry>
319 <term>-b buffersize</term>
320 <listitem><para>This option changes the transmit/send buffer
321 size when getting or putting a file from/to the server. The default
322 is 65520 bytes. Setting this value smaller (to 1200 bytes) has been
323 observed to speed up file transfers to and from a Win9x server.
324 </para></listitem>
325 </varlistentry>
326
327 <varlistentry>
328 <term>-e</term>
329 <listitem><para>This command line parameter requires the remote
330 server support the UNIX extensions. Request that the connection be
331 encrypted. This is new for Samba 3.2 and will only work with Samba
332 3.2 or above servers. Negotiates SMB encryption using GSSAPI. Uses
333 the given credentials for the encryption negotiaion (either kerberos
334 or NTLMv1/v2 if given domain/username/password triple. Fails the
335 connection if encryption cannot be negotiated.
336 </para></listitem>
337 </varlistentry>
338
339 &stdarg.client.debug;
340 &popt.common.samba;
341 &popt.common.credentials;
342 &popt.common.connection;
343
344 <varlistentry>
345 <term>-T tar options</term>
346 <listitem><para>smbclient may be used to create <command>tar(1)
347 </command> compatible backups of all the files on an SMB/CIFS
348 share. The secondary tar flags that can be given to this option
349 are : </para>
350
351 <itemizedlist>
352 <listitem><para><parameter>c</parameter> - Create a tar file on UNIX.
353 Must be followed by the name of a tar file, tape device
354 or "-" for standard output. If using standard output you must
355 turn the log level to its lowest value -d0 to avoid corrupting
356 your tar file. This flag is mutually exclusive with the
357 <parameter>x</parameter> flag. </para></listitem>
358
359 <listitem><para><parameter>x</parameter> - Extract (restore) a local
360 tar file back to a share. Unless the -D option is given, the tar
361 files will be restored from the top level of the share. Must be
362 followed by the name of the tar file, device or "-" for standard
363 input. Mutually exclusive with the <parameter>c</parameter> flag.
364 Restored files have their creation times (mtime) set to the
365 date saved in the tar file. Directories currently do not get
366 their creation dates restored properly. </para></listitem>
367
368 <listitem><para><parameter>I</parameter> - Include files and directories.
369 Is the default behavior when filenames are specified above. Causes
370 files to be included in an extract or create (and therefore
371 everything else to be excluded). See example below. Filename globbing
372 works in one of two ways. See <parameter>r</parameter> below. </para></listitem>
373
374 <listitem><para><parameter>X</parameter> - Exclude files and directories.
375 Causes files to be excluded from an extract or create. See
376 example below. Filename globbing works in one of two ways now.
377 See <parameter>r</parameter> below. </para></listitem>
378
379 <listitem><para><parameter>F</parameter> - File containing a list of files and directories.
380 The <parameter>F</parameter> causes the name following the tarfile to
381 create to be read as a filename that contains a list of files and directories to
382 be included in an extract or create (and therefore everything else to be excluded).
383 See example below. Filename globbing works in one of two ways.
384 See <parameter>r</parameter> below.
385 </para></listitem>
386
387 <listitem><para><parameter>b</parameter> - Blocksize. Must be followed
388 by a valid (greater than zero) blocksize. Causes tar file to be
389 written out in blocksize*TBLOCK (usually 512 byte) blocks.
390 </para></listitem>
391
392 <listitem><para><parameter>g</parameter> - Incremental. Only back up
393 files that have the archive bit set. Useful only with the
394 <parameter>c</parameter> flag. </para></listitem>
395
396 <listitem><para><parameter>q</parameter> - Quiet. Keeps tar from printing
397 diagnostics as it works. This is the same as tarmode quiet.
398 </para></listitem>
399
400 <listitem><para><parameter>r</parameter> - Regular expression include
401 or exclude. Uses regular expression matching for
402 excluding or excluding files if compiled with HAVE_REGEX_H.
403 However this mode can be very slow. If not compiled with
404 HAVE_REGEX_H, does a limited wildcard match on '*' and '?'.
405 </para></listitem>
406
407 <listitem><para><parameter>N</parameter> - Newer than. Must be followed
408 by the name of a file whose date is compared against files found
409 on the share during a create. Only files newer than the file
410 specified are backed up to the tar file. Useful only with the
411 <parameter>c</parameter> flag. </para></listitem>
412
413 <listitem><para><parameter>a</parameter> - Set archive bit. Causes the
414 archive bit to be reset when a file is backed up. Useful with the
415 <parameter>g</parameter> and <parameter>c</parameter> flags.
416 </para></listitem>
417 </itemizedlist>
418
419 <para><emphasis>Tar Long File Names</emphasis></para>
420
421 <para><command>smbclient</command>'s tar option now supports long
422 file names both on backup and restore. However, the full path
423 name of the file must be less than 1024 bytes. Also, when
424 a tar archive is created, <command>smbclient</command>'s tar option places all
425 files in the archive with relative names, not absolute names.
426 </para>
427
428 <para><emphasis>Tar Filenames</emphasis></para>
429
430 <para>All file names can be given as DOS path names (with '\\'
431 as the component separator) or as UNIX path names (with '/' as
432 the component separator). </para>
433
434 <para><emphasis>Examples</emphasis></para>
435
436 <para>Restore from tar file <filename>backup.tar</filename> into myshare on mypc
437 (no password on share). </para>
438
439 <para><command>smbclient //mypc/yshare "" -N -Tx backup.tar
440 </command></para>
441
442 <para>Restore everything except <filename>users/docs</filename>
443 </para>
444
445 <para><command>smbclient //mypc/myshare "" -N -TXx backup.tar
446 users/docs</command></para>
447
448 <para>Create a tar file of the files beneath <filename>
449 users/docs</filename>. </para>
450
451 <para><command>smbclient //mypc/myshare "" -N -Tc
452 backup.tar users/docs </command></para>
453
454 <para>Create the same tar file as above, but now use
455 a DOS path name. </para>
456
457 <para><command>smbclient //mypc/myshare "" -N -tc backup.tar
458 users\edocs </command></para>
459
460 <para>Create a tar file of the files listed in the file <filename>tarlist</filename>.</para>
461
462 <para><command>smbclient //mypc/myshare "" -N -TcF
463 backup.tar tarlist</command></para>
464
465 <para>Create a tar file of all the files and directories in
466 the share. </para>
467
468 <para><command>smbclient //mypc/myshare "" -N -Tc backup.tar *
469 </command></para>
470 </listitem>
471 </varlistentry>
472
473 <varlistentry>
474 <term>-D initial directory</term>
475 <listitem><para>Change to initial directory before starting. Probably
476 only of any use with the tar -T option. </para></listitem>
477 </varlistentry>
478
479 <varlistentry>
480 <term>-c command string</term>
481 <listitem><para>command string is a semicolon-separated list of
482 commands to be executed instead of prompting from stdin. <parameter>
483 -N</parameter> is implied by <parameter>-c</parameter>.</para>
484
485 <para>This is particularly useful in scripts and for printing stdin
486 to the server, e.g. <command>-c 'print -'</command>. </para></listitem>
487 </varlistentry>
488
489 </variablelist>
490</refsect1>
491
492
493<refsect1>
494 <title>OPERATIONS</title>
495
496 <para>Once the client is running, the user is presented with
497 a prompt : </para>
498
499 <para><prompt>smb:\&gt; </prompt></para>
500
501 <para>The backslash ("\\") indicates the current working directory
502 on the server, and will change if the current working directory
503 is changed. </para>
504
505 <para>The prompt indicates that the client is ready and waiting to
506 carry out a user command. Each command is a single word, optionally
507 followed by parameters specific to that command. Command and parameters
508 are space-delimited unless these notes specifically
509 state otherwise. All commands are case-insensitive. Parameters to
510 commands may or may not be case sensitive, depending on the command.
511 </para>
512
513 <para>You can specify file names which have spaces in them by quoting
514 the name with double quotes, for example "a long file name". </para>
515
516 <para>Parameters shown in square brackets (e.g., "[parameter]") are
517 optional. If not given, the command will use suitable defaults. Parameters
518 shown in angle brackets (e.g., "&lt;parameter&gt;") are required.
519 </para>
520
521
522 <para>Note that all commands operating on the server are actually
523 performed by issuing a request to the server. Thus the behavior may
524 vary from server to server, depending on how the server was implemented.
525 </para>
526
527 <para>The commands available are given here in alphabetical order. </para>
528
529 <variablelist>
530 <varlistentry>
531 <term>? [command]</term>
532 <listitem><para>If <replaceable>command</replaceable> is specified, the ? command will display
533 a brief informative message about the specified command. If no
534 command is specified, a list of available commands will
535 be displayed. </para></listitem>
536 </varlistentry>
537
538 <varlistentry>
539 <term>! [shell command]</term>
540 <listitem><para>If <replaceable>shell command</replaceable> is specified, the !
541 command will execute a shell locally and run the specified shell
542 command. If no command is specified, a local shell will be run.
543 </para></listitem>
544 </varlistentry>
545
546 <varlistentry>
547 <term>allinfo file</term>
548 <listitem><para>The client will request that the server return
549 all known information about a file or directory (including streams).
550 </para></listitem>
551 </varlistentry>
552
553 <varlistentry>
554 <term>altname file</term>
555 <listitem><para>The client will request that the server return
556 the "alternate" name (the 8.3 name) for a file or directory.
557 </para></listitem>
558 </varlistentry>
559
560 <varlistentry>
561 <term>archive &lt;number&gt;</term>
562 <listitem><para>Sets the archive level when operating on files.
563 0 means ignore the archive bit, 1 means only operate on files with this bit set,
564 2 means only operate on files with this bit set and reset it after operation,
565 3 means operate on all files and reset it after operation. The default is 0.
566 </para></listitem>
567 </varlistentry>
568
569 <varlistentry>
570 <term>blocksize &lt;number&gt;</term>
571 <listitem><para>Sets the blocksize parameter for a tar operation. The default is 20.
572 Causes tar file to be written out in blocksize*TBLOCK (normally 512 byte) units.
573 </para></listitem>
574 </varlistentry>
575
576 <varlistentry>
577 <term>cancel jobid0 [jobid1] ... [jobidN]</term>
578 <listitem><para>The client will request that the server cancel
579 the printjobs identified by the given numeric print job ids.
580 </para></listitem>
581 </varlistentry>
582
583 <varlistentry>
584 <term>case_sensitive</term>
585 <listitem><para>Toggles the setting of the flag in SMB packets that
586 tells the server to treat filenames as case sensitive. Set to OFF by
587 default (tells file server to treat filenames as case insensitive). Only
588 currently affects Samba 3.0.5 and above file servers with the case sensitive
589 parameter set to auto in the smb.conf.
590 </para></listitem>
591 </varlistentry>
592
593 <varlistentry>
594 <term>cd &lt;directory name&gt;</term>
595 <listitem><para>If "directory name" is specified, the current
596 working directory on the server will be changed to the directory
597 specified. This operation will fail if for any reason the specified
598 directory is inaccessible. </para>
599
600 <para>If no directory name is specified, the current working
601 directory on the server will be reported. </para></listitem>
602 </varlistentry>
603
604 <varlistentry>
605 <term>chmod file mode in octal</term>
606 <listitem><para>This command depends on the server supporting the CIFS
607 UNIX extensions and will fail if the server does not. The client requests that the server
608 change the UNIX permissions to the given octal mode, in standard UNIX format.
609 </para></listitem>
610 </varlistentry>
611
612 <varlistentry>
613 <term>chown file uid gid</term>
614 <listitem><para>This command depends on the server supporting the CIFS
615 UNIX extensions and will fail if the server does not. The client requests that the server
616 change the UNIX user and group ownership to the given decimal values. Note there is
617 currently no way to remotely look up the UNIX uid and gid values for a given name.
618 This may be addressed in future versions of the CIFS UNIX extensions.
619 </para></listitem>
620 </varlistentry>
621
622 <varlistentry>
623 <term>close &lt;fileid&gt;</term>
624 <listitem><para>Closes a file explicitly opened by the open command. Used for
625 internal Samba testing purposes.
626 </para></listitem>
627 </varlistentry>
628
629 <varlistentry>
630 <term>del &lt;mask&gt;</term>
631 <listitem><para>The client will request that the server attempt
632 to delete all files matching <replaceable>mask</replaceable> from the current working
633 directory on the server. </para></listitem>
634 </varlistentry>
635
636 <varlistentry>
637 <term>dir &lt;mask&gt;</term>
638 <listitem><para>A list of the files matching <replaceable>mask</replaceable> in the current
639 working directory on the server will be retrieved from the server
640 and displayed. </para></listitem>
641 </varlistentry>
642
643 <varlistentry>
644 <term>du &lt;filename&gt;</term>
645 <listitem><para>Does a directory listing and then prints out the current disk useage and free space on a share.
646 </para></listitem>
647 </varlistentry>
648
649 <varlistentry>
650 <term>echo &lt;number&gt; &lt;data&gt;</term>
651 <listitem><para>Does an SMBecho request to ping the server. Used for internal Samba testing purposes.
652 </para></listitem>
653 </varlistentry>
654
655 <varlistentry>
656 <term>exit</term>
657 <listitem><para>Terminate the connection with the server and exit
658 from the program. </para></listitem>
659 </varlistentry>
660
661 <varlistentry>
662 <term>get &lt;remote file name&gt; [local file name]</term>
663 <listitem><para>Copy the file called <filename>remote file name</filename> from
664 the server to the machine running the client. If specified, name
665 the local copy <filename>local file name</filename>. Note that all transfers in
666 <command>smbclient</command> are binary. See also the
667 lowercase command. </para></listitem>
668 </varlistentry>
669
670 <varlistentry>
671 <term>getfacl &lt;filename&gt;</term>
672 <listitem><para>Requires the server support the UNIX extensions. Requests and prints
673 the POSIX ACL on a file.
674 </para></listitem>
675 </varlistentry>
676
677 <varlistentry>
678 <term>hardlink &lt;src&gt; &lt;dest&gt;</term>
679 <listitem><para>Creates a hardlink on the server using Windows CIFS semantics.
680 </para></listitem>
681 </varlistentry>
682
683 <varlistentry>
684 <term>help [command]</term>
685 <listitem><para>See the ? command above. </para></listitem>
686 </varlistentry>
687
688 <varlistentry>
689 <term>history</term> <listitem><para>Displays the command history.</para></listitem>
690 </varlistentry>
691
692 <varlistentry>
693 <term>iosize &lt;bytes&gt;</term>
694 <listitem><para>When sending or receiving files, smbclient uses an
695 internal memory buffer by default of size 64512 bytes. This command
696 allows this size to be set to any range between 16384 (0x4000) bytes
697 and 16776960 (0xFFFF00) bytes. Larger sizes may mean more efficient
698 data transfer as smbclient will try and use the most efficient
699 read and write calls for the connected server.
700 </para></listitem>
701 </varlistentry>
702
703 <varlistentry>
704 <term>lcd [directory name]</term>
705 <listitem><para>If <replaceable>directory name</replaceable> is specified, the current
706 working directory on the local machine will be changed to
707 the directory specified. This operation will fail if for any
708 reason the specified directory is inaccessible. </para>
709
710 <para>If no directory name is specified, the name of the
711 current working directory on the local machine will be reported.
712 </para></listitem>
713 </varlistentry>
714
715 <varlistentry>
716 <term>link target linkname</term>
717 <listitem><para>This command depends on the server supporting the CIFS
718 UNIX extensions and will fail if the server does not. The client requests that the server
719 create a hard link between the linkname and target files. The linkname file
720 must not exist.
721 </para></listitem>
722 </varlistentry>
723
724 <varlistentry>
725 <term>listconnect</term>
726 <listitem><para>Show the current connections held for DFS purposes.
727 </para></listitem>
728 </varlistentry>
729
730 <varlistentry>
731 <term>lock &lt;filenum&gt; &lt;r|w&gt; &lt;hex-start&gt; &lt;hex-len&gt;</term>
732 <listitem><para>This command depends on the server supporting the CIFS
733 UNIX extensions and will fail if the server does not. Tries to set a POSIX
734 fcntl lock of the given type on the given range. Used for internal Samba testing purposes.
735 </para></listitem>
736 </varlistentry>
737
738 <varlistentry>
739 <term>logon &lt;username&gt; &lt;password&gt;</term>
740 <listitem><para>Establishes a new vuid for this session by logging on again.
741 Replaces the current vuid. Prints out the new vuid. Used for internal Samba testing purposes.
742 </para></listitem>
743 </varlistentry>
744
745 <varlistentry>
746 <term>lowercase</term>
747 <listitem><para>Toggle lowercasing of filenames for the get and
748 mget commands.
749 </para>
750
751 <para>When lowercasing is toggled ON, local filenames are converted
752 to lowercase when using the get and mget commands. This is
753 often useful when copying (say) MSDOS files from a server, because
754 lowercase filenames are the norm on UNIX systems. </para></listitem>
755 </varlistentry>
756
757 <varlistentry>
758 <term>ls &lt;mask&gt;</term>
759 <listitem><para>See the dir command above. </para></listitem>
760 </varlistentry>
761
762 <varlistentry>
763 <term>mask &lt;mask&gt;</term>
764 <listitem><para>This command allows the user to set up a mask
765 which will be used during recursive operation of the mget and
766 mput commands. </para>
767
768 <para>The masks specified to the mget and mput commands act as
769 filters for directories rather than files when recursion is
770 toggled ON. </para>
771
772 <para>The mask specified with the mask command is necessary
773 to filter files within those directories. For example, if the
774 mask specified in an mget command is "source*" and the mask
775 specified with the mask command is "*.c" and recursion is
776 toggled ON, the mget command will retrieve all files matching
777 "*.c" in all directories below and including all directories
778 matching "source*" in the current working directory. </para>
779
780 <para>Note that the value for mask defaults to blank (equivalent
781 to "*") and remains so until the mask command is used to change it.
782 It retains the most recently specified value indefinitely. To
783 avoid unexpected results it would be wise to change the value of
784 mask back to "*" after using the mget or mput commands. </para></listitem>
785 </varlistentry>
786
787 <varlistentry>
788 <term>md &lt;directory name&gt;</term>
789 <listitem><para>See the mkdir command. </para></listitem>
790 </varlistentry>
791
792 <varlistentry>
793 <term>mget &lt;mask&gt;</term>
794 <listitem><para>Copy all files matching <replaceable>mask</replaceable> from the server to
795 the machine running the client. </para>
796
797 <para>Note that <replaceable>mask</replaceable> is interpreted differently during recursive
798 operation and non-recursive operation - refer to the recurse and
799 mask commands for more information. Note that all transfers in
800 <command>smbclient</command> are binary. See also the lowercase command. </para></listitem>
801 </varlistentry>
802
803 <varlistentry>
804 <term>mkdir &lt;directory name&gt;</term>
805 <listitem><para>Create a new directory on the server (user access
806 privileges permitting) with the specified name. </para></listitem>
807 </varlistentry>
808
809 <varlistentry>
810 <term>more &lt;file name&gt;</term>
811 <listitem><para>Fetch a remote file and view it with the contents
812 of your PAGER environment variable.
813 </para></listitem>
814 </varlistentry>
815
816 <varlistentry>
817 <term>mput &lt;mask&gt;</term>
818 <listitem><para>Copy all files matching <replaceable>mask</replaceable> in the current working
819 directory on the local machine to the current working directory on
820 the server. </para>
821
822 <para>Note that <replaceable>mask</replaceable> is interpreted differently during recursive
823 operation and non-recursive operation - refer to the recurse and mask
824 commands for more information. Note that all transfers in <command>smbclient</command>
825 are binary. </para></listitem>
826 </varlistentry>
827
828 <varlistentry>
829 <term>posix</term>
830 <listitem><para>Query the remote server to see if it supports the CIFS UNIX
831 extensions and prints out the list of capabilities supported. If so, turn
832 on POSIX pathname processing and large file read/writes (if available),.
833 </para></listitem>
834 </varlistentry>
835
836 <varlistentry>
837 <term>posix_encrypt &lt;domain&gt; &lt;username&gt; &lt;password&gt;</term>
838 <listitem><para>This command depends on the server supporting the CIFS
839 UNIX extensions and will fail if the server does not. Attempt to negotiate
840 SMB encryption on this connection. If smbclient connected with kerberos
841 credentials (-k) the arguments to this command are ignored and the kerberos
842 credentials are used to negotiate GSSAPI signing and sealing instead. See
843 also the -e option to smbclient to force encryption on initial connection.
844 This command is new with Samba 3.2.
845 </para></listitem>
846 </varlistentry>
847
848 <varlistentry>
849 <term>posix_open &lt;filename&gt; &lt;octal mode&gt;</term>
850 <listitem><para>This command depends on the server supporting the CIFS
851 UNIX extensions and will fail if the server does not. Opens a remote file
852 using the CIFS UNIX extensions and prints a fileid. Used for internal Samba
853 testing purposes.
854 </para></listitem>
855 </varlistentry>
856
857 <varlistentry>
858 <term>posix_mkdir &lt;directoryname&gt; &lt;octal mode&gt;</term>
859 <listitem><para>This command depends on the server supporting the CIFS
860 UNIX extensions and will fail if the server does not. Creates a remote directory
861 using the CIFS UNIX extensions with the given mode.
862 </para></listitem>
863 </varlistentry>
864
865 <varlistentry>
866 <term>posix_rmdir &lt;directoryname&gt;</term>
867 <listitem><para>This command depends on the server supporting the CIFS
868 UNIX extensions and will fail if the server does not. Deletes a remote directory
869 using the CIFS UNIX extensions.
870 </para></listitem>
871 </varlistentry>
872
873 <varlistentry>
874 <term>posix_unlink &lt;filename&gt;</term>
875 <listitem><para>This command depends on the server supporting the CIFS
876 UNIX extensions and will fail if the server does not. Deletes a remote file
877 using the CIFS UNIX extensions.
878 </para></listitem>
879 </varlistentry>
880
881 <varlistentry>
882 <term>print &lt;file name&gt;</term>
883 <listitem><para>Print the specified file from the local machine
884 through a printable service on the server. </para></listitem>
885 </varlistentry>
886
887 <varlistentry>
888 <term>prompt</term>
889 <listitem><para>Toggle prompting for filenames during operation
890 of the mget and mput commands. </para>
891
892 <para>When toggled ON, the user will be prompted to confirm
893 the transfer of each file during these commands. When toggled
894 OFF, all specified files will be transferred without prompting.
895 </para></listitem>
896 </varlistentry>
897
898 <varlistentry>
899 <term>put &lt;local file name&gt; [remote file name]</term>
900 <listitem><para>Copy the file called <filename>local file name</filename> from the
901 machine running the client to the server. If specified,
902 name the remote copy <filename>remote file name</filename>. Note that all transfers
903 in <command>smbclient</command> are binary. See also the lowercase command.
904 </para></listitem>
905 </varlistentry>
906
907 <varlistentry>
908 <term>queue</term>
909 <listitem><para>Displays the print queue, showing the job id,
910 name, size and current status. </para></listitem>
911 </varlistentry>
912
913 <varlistentry>
914 <term>quit</term>
915 <listitem><para>See the exit command. </para></listitem>
916 </varlistentry>
917
918 <varlistentry>
919 <term>rd &lt;directory name&gt;</term>
920 <listitem><para>See the rmdir command. </para></listitem>
921 </varlistentry>
922
923 <varlistentry>
924 <term>recurse</term>
925 <listitem><para>Toggle directory recursion for the commands mget
926 and mput. </para>
927
928 <para>When toggled ON, these commands will process all directories
929 in the source directory (i.e., the directory they are copying
930 from ) and will recurse into any that match the mask specified
931 to the command. Only files that match the mask specified using
932 the mask command will be retrieved. See also the mask command.
933 </para>
934
935 <para>When recursion is toggled OFF, only files from the current
936 working directory on the source machine that match the mask specified
937 to the mget or mput commands will be copied, and any mask specified
938 using the mask command will be ignored. </para></listitem>
939 </varlistentry>
940
941 <varlistentry>
942 <term>rename &lt;old filename&gt; &lt;new filename&gt;</term>
943 <listitem><para>Rename files in the current working directory on the
944 server from <replaceable>old filename</replaceable> to
945 <replaceable>new filename</replaceable>. </para></listitem>
946 </varlistentry>
947
948 <varlistentry>
949 <term>rm &lt;mask&gt;</term>
950 <listitem><para>Remove all files matching <replaceable>mask</replaceable> from the current
951 working directory on the server. </para></listitem>
952 </varlistentry>
953
954 <varlistentry>
955 <term>rmdir &lt;directory name&gt;</term>
956 <listitem><para>Remove the specified directory (user access
957 privileges permitting) from the server. </para></listitem>
958 </varlistentry>
959
960 <varlistentry>
961 <term>setmode &lt;filename&gt; &lt;perm=[+|\-]rsha&gt;</term>
962 <listitem><para>A version of the DOS attrib command to set
963 file permissions. For example: </para>
964
965 <para><command>setmode myfile +r </command></para>
966
967 <para>would make myfile read only. </para></listitem>
968 </varlistentry>
969
970 <varlistentry>
971 <term>showconnect</term>
972 <listitem><para>Show the currently active connection held for DFS purposes.
973 </para></listitem>
974 </varlistentry>
975
976 <varlistentry>
977 <term>stat file</term>
978 <listitem><para>This command depends on the server supporting the CIFS
979 UNIX extensions and will fail if the server does not. The client requests the
980 UNIX basic info level and prints out the same info that the Linux stat command
981 would about the file. This includes the size, blocks used on disk, file type,
982 permissions, inode number, number of links and finally the three timestamps
983 (access, modify and change). If the file is a special file (symlink, character or
984 block device, fifo or socket) then extra information may also be printed.
985 </para></listitem>
986 </varlistentry>
987
988 <varlistentry>
989 <term>symlink target linkname</term>
990 <listitem><para>This command depends on the server supporting the CIFS
991 UNIX extensions and will fail if the server does not. The client requests that the server
992 create a symbolic hard link between the target and linkname files. The linkname file
993 must not exist. Note that the server will not create a link to any path that lies
994 outside the currently connected share. This is enforced by the Samba server.
995 </para></listitem>
996 </varlistentry>
997
998 <varlistentry>
999 <term>tar &lt;c|x&gt;[IXbgNa]</term>
1000 <listitem><para>Performs a tar operation - see the <parameter>-T
1001 </parameter> command line option above. Behavior may be affected
1002 by the tarmode command (see below). Using g (incremental) and N
1003 (newer) will affect tarmode settings. Note that using the "-" option
1004 with tar x may not work - use the command line option instead.
1005 </para></listitem>
1006 </varlistentry>
1007
1008 <varlistentry>
1009 <term>blocksize &lt;blocksize&gt;</term>
1010 <listitem><para>Blocksize. Must be followed by a valid (greater
1011 than zero) blocksize. Causes tar file to be written out in
1012 <replaceable>blocksize</replaceable>*TBLOCK (usually 512 byte) blocks. </para></listitem>
1013 </varlistentry>
1014
1015 <varlistentry>
1016 <term>tarmode &lt;full|inc|reset|noreset&gt;</term>
1017 <listitem><para>Changes tar's behavior with regard to archive
1018 bits. In full mode, tar will back up everything regardless of the
1019 archive bit setting (this is the default mode). In incremental mode,
1020 tar will only back up files with the archive bit set. In reset mode,
1021 tar will reset the archive bit on all files it backs up (implies
1022 read/write share). </para></listitem>
1023 </varlistentry>
1024
1025 <varlistentry>
1026 <term>unlock &lt;filenum&gt; &lt;hex-start&gt; &lt;hex-len&gt;</term>
1027 <listitem><para>This command depends on the server supporting the CIFS
1028 UNIX extensions and will fail if the server does not. Tries to unlock a POSIX
1029 fcntl lock on the given range. Used for internal Samba testing purposes.
1030 </para></listitem>
1031 </varlistentry>
1032
1033 <varlistentry>
1034 <term>volume</term>
1035 <listitem><para>Prints the current volume name of the share.
1036 </para></listitem>
1037 </varlistentry>
1038
1039 <varlistentry>
1040 <term>vuid &lt;number&gt;</term>
1041 <listitem><para>Changes the currently used vuid in the protocol to
1042 the given arbitrary number. Without an argument prints out the current
1043 vuid being used. Used for internal Samba testing purposes.
1044 </para></listitem>
1045 </varlistentry>
1046
1047 </variablelist>
1048</refsect1>
1049
1050<refsect1>
1051 <title>NOTES</title>
1052
1053 <para>Some servers are fussy about the case of supplied usernames,
1054 passwords, share names (AKA service names) and machine names.
1055 If you fail to connect try giving all parameters in uppercase.
1056 </para>
1057
1058 <para>It is often necessary to use the -n option when connecting
1059 to some types of servers. For example OS/2 LanManager insists
1060 on a valid NetBIOS name being used, so you need to supply a valid
1061 name that would be known to the server.</para>
1062
1063 <para>smbclient supports long file names where the server
1064 supports the LANMAN2 protocol or above. </para>
1065</refsect1>
1066
1067<refsect1>
1068 <title>ENVIRONMENT VARIABLES</title>
1069
1070 <para>The variable <envar>USER</envar> may contain the
1071 username of the person using the client. This information is
1072 used only if the protocol level is high enough to support
1073 session-level passwords.</para>
1074
1075
1076 <para>The variable <envar>PASSWD</envar> may contain
1077 the password of the person using the client. This information is
1078 used only if the protocol level is high enough to support
1079 session-level passwords. </para>
1080
1081 <para>The variable <envar>LIBSMB_PROG</envar> may contain
1082 the path, executed with system(), which the client should connect
1083 to instead of connecting to a server. This functionality is primarily
1084 intended as a development aid, and works best when using a LMHOSTS
1085 file</para>
1086</refsect1>
1087
1088
1089<refsect1>
1090 <title>INSTALLATION</title>
1091
1092 <para>The location of the client program is a matter for
1093 individual system administrators. The following are thus
1094 suggestions only. </para>
1095
1096 <para>It is recommended that the smbclient software be installed
1097 in the <filename>/usr/local/samba/bin/</filename> or <filename>
1098 /usr/samba/bin/</filename> directory, this directory readable
1099 by all, writeable only by root. The client program itself should
1100 be executable by all. The client should <emphasis>NOT</emphasis> be
1101 setuid or setgid! </para>
1102
1103 <para>The client log files should be put in a directory readable
1104 and writeable only by the user. </para>
1105
1106 <para>To test the client, you will need to know the name of a
1107 running SMB/CIFS server. It is possible to run <citerefentry><refentrytitle>smbd</refentrytitle>
1108 <manvolnum>8</manvolnum></citerefentry> as an ordinary user - running that server as a daemon
1109 on a user-accessible port (typically any port number over 1024)
1110 would provide a suitable test server. </para>
1111</refsect1>
1112
1113
1114<refsect1>
1115 <title>DIAGNOSTICS</title>
1116
1117 <para>Most diagnostics issued by the client are logged in a
1118 specified log file. The log file name is specified at compile time,
1119 but may be overridden on the command line. </para>
1120
1121 <para>The number and nature of diagnostics available depends
1122 on the debug level used by the client. If you have problems,
1123 set the debug level to 3 and peruse the log files. </para>
1124</refsect1>
1125
1126
1127<refsect1>
1128 <title>VERSION</title>
1129
1130 <para>This man page is correct for version 3.2 of the Samba suite.</para>
1131</refsect1>
1132
1133
1134<refsect1>
1135 <title>AUTHOR</title>
1136
1137 <para>The original Samba software and related utilities
1138 were created by Andrew Tridgell. Samba is now developed
1139 by the Samba Team as an Open Source project similar
1140 to the way the Linux kernel is developed.</para>
1141
1142 <para>The original Samba man pages were written by Karl Auer.
1143 The man page sources were converted to YODL format (another
1144 excellent piece of Open Source software, available at <ulink url="ftp://ftp.icce.rug.nl/pub/unix/">
1145 ftp://ftp.icce.rug.nl/pub/unix/</ulink>) and updated for the Samba 2.0
1146 release by Jeremy Allison. The conversion to DocBook for
1147 Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0
1148 was done by Alexander Bokovoy.</para>
1149</refsect1>
1150
1151</refentry>
Note: See TracBrowser for help on using the repository browser.