source: branches/samba-3.2.x/source/include/smb_macros.h

Last change on this file was 133, checked in by Paul Smedley, 17 years ago

Update trunk to 3.2.0pre3

File size: 16.1 KB
Line 
1/*
2 Unix SMB/CIFS implementation.
3 SMB parameters and setup
4 Copyright (C) Andrew Tridgell 1992-1999
5 Copyright (C) John H Terpstra 1996-1999
6 Copyright (C) Luke Kenneth Casson Leighton 1996-1999
7 Copyright (C) Paul Ashton 1998 - 1999
8
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 3 of the License, or
12 (at your option) any later version.
13
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
18
19 You should have received a copy of the GNU General Public License
20 along with this program. If not, see <http://www.gnu.org/licenses/>.
21*/
22
23#ifndef _SMB_MACROS_H
24#define _SMB_MACROS_H
25
26/* Misc bit macros */
27#define BOOLSTR(b) ((b) ? "Yes" : "No")
28#define BITSETW(ptr,bit) ((SVAL(ptr,0) & (1<<(bit)))!=0)
29
30/* for readability... */
31#define IS_DOS_READONLY(test_mode) (((test_mode) & aRONLY) != 0)
32#define IS_DOS_DIR(test_mode) (((test_mode) & aDIR) != 0)
33#define IS_DOS_ARCHIVE(test_mode) (((test_mode) & aARCH) != 0)
34#define IS_DOS_SYSTEM(test_mode) (((test_mode) & aSYSTEM) != 0)
35#define IS_DOS_HIDDEN(test_mode) (((test_mode) & aHIDDEN) != 0)
36
37#ifndef SAFE_FREE /* Oh no this is also defined in tdb.h */
38
39/**
40 * Free memory if the pointer and zero the pointer.
41 *
42 * @note You are explicitly allowed to pass NULL pointers -- they will
43 * always be ignored.
44 **/
45#define SAFE_FREE(x) do { if ((x) != NULL) {free(x); x=NULL;} } while(0)
46#endif
47
48/* assert macros */
49#ifdef DEVELOPER
50#define SMB_ASSERT(b) ( (b) ? (void)0 : \
51 (DEBUG(0,("PANIC: assert failed at %s(%d): %s\n", \
52 __FILE__, __LINE__, #b)), smb_panic("assert failed: " #b)))
53#else
54/* redefine the assert macro for non-developer builds */
55#define SMB_ASSERT(b) ( (b) ? (void)0 : \
56 (DEBUG(0,("PANIC: assert failed at %s(%d): %s\n", \
57 __FILE__, __LINE__, #b))))
58#endif
59
60#define SMB_WARN(condition, message) \
61 ((condition) ? (void)0 : \
62 DEBUG(0, ("WARNING: %s: %s\n", #condition, message)))
63
64#define SMB_ASSERT_ARRAY(a,n) SMB_ASSERT((sizeof(a)/sizeof((a)[0])) >= (n))
65
66/* these are useful macros for checking validity of handles */
67#define IS_IPC(conn) ((conn) && (conn)->ipc)
68#define IS_PRINT(conn) ((conn) && (conn)->printer)
69/* you must add the following extern declaration to files using this macro
70 * (do not add it to the macro as that causes nested extern declaration warnings)
71 * extern struct current_user current_user;
72 */
73#define FSP_BELONGS_CONN(fsp,conn) do {\
74 if (!((fsp) && (conn) && ((conn)==(fsp)->conn) && (current_user.vuid==(fsp)->vuid))) \
75 return ERROR_NT(NT_STATUS_INVALID_HANDLE); \
76 } while(0)
77
78#define FNUM_OK(fsp,c) ((fsp) && !(fsp)->is_directory && (c)==(fsp)->conn && current_user.vuid==(fsp)->vuid)
79
80/* you must add the following extern declaration to files using this macro
81 * (do not add it to the macro as that causes nested extern declaration warnings)
82 * extern struct current_user current_user;
83 */
84#define CHECK_FSP(fsp,conn) do {\
85 if (!(fsp) || !(conn)) \
86 return ERROR_NT(NT_STATUS_INVALID_HANDLE); \
87 else if (((conn) != (fsp)->conn) || current_user.vuid != (fsp)->vuid) \
88 return ERROR_NT(NT_STATUS_INVALID_HANDLE); \
89 else if ((fsp)->is_directory) \
90 return ERROR_NT(NT_STATUS_INVALID_DEVICE_REQUEST); \
91 else if ((fsp)->fh->fd == -1) \
92 return ERROR_NT(NT_STATUS_ACCESS_DENIED); \
93 (fsp)->num_smb_operations++;\
94 } while(0)
95
96#define CHECK_READ(fsp,inbuf) (((fsp)->fh->fd != -1) && ((fsp)->can_read || \
97 ((SVAL((inbuf),smb_flg2) & FLAGS2_READ_PERMIT_EXECUTE) && \
98 (fsp->access_mask & FILE_EXECUTE))))
99
100#define CHECK_WRITE(fsp) ((fsp)->can_write && ((fsp)->fh->fd != -1))
101
102#define ERROR_WAS_LOCK_DENIED(status) (NT_STATUS_EQUAL((status), NT_STATUS_LOCK_NOT_GRANTED) || \
103 NT_STATUS_EQUAL((status), NT_STATUS_FILE_LOCK_CONFLICT) )
104
105/* the service number for the [globals] defaults */
106#define GLOBAL_SECTION_SNUM (-1)
107/* translates a connection number into a service number */
108#define SNUM(conn) ((conn)?(conn)->params->service:GLOBAL_SECTION_SNUM)
109
110
111/* access various service details */
112#define SERVICE(snum) (lp_servicename(snum))
113#define PRINTERNAME(snum) (lp_printername(snum))
114#define CAN_WRITE(conn) (!conn->read_only)
115#define VALID_SNUM(snum) (lp_snum_ok(snum))
116#define GUEST_OK(snum) (VALID_SNUM(snum) && lp_guest_ok(snum))
117#define GUEST_ONLY(snum) (VALID_SNUM(snum) && lp_guest_only(snum))
118#define CAN_SETDIR(snum) (!lp_no_set_dir(snum))
119#define CAN_PRINT(conn) ((conn) && lp_print_ok(SNUM(conn)))
120#define MAP_HIDDEN(conn) ((conn) && lp_map_hidden(SNUM(conn)))
121#define MAP_SYSTEM(conn) ((conn) && lp_map_system(SNUM(conn)))
122#define MAP_ARCHIVE(conn) ((conn) && lp_map_archive(SNUM(conn)))
123#define IS_HIDDEN_PATH(conn,path) ((conn) && is_in_path((path),(conn)->hide_list,(conn)->case_sensitive))
124#define IS_VETO_PATH(conn,path) ((conn) && is_in_path((path),(conn)->veto_list,(conn)->case_sensitive))
125#define IS_VETO_OPLOCK_PATH(conn,path) ((conn) && is_in_path((path),(conn)->veto_oplock_list,(conn)->case_sensitive))
126
127/*
128 * Used by the stat cache code to check if a returned
129 * stat structure is valid.
130 */
131
132#define VALID_STAT(st) ((st).st_nlink != 0)
133#define VALID_STAT_OF_DIR(st) (VALID_STAT(st) && S_ISDIR((st).st_mode))
134#define SET_STAT_INVALID(st) ((st).st_nlink = 0)
135
136#ifndef MIN
137#define MIN(a,b) ((a)<(b)?(a):(b))
138#endif
139#ifndef MAX
140#define MAX(a,b) ((a)>(b)?(a):(b))
141#endif
142
143#ifndef ABS
144#define ABS(a) ((a)>0?(a):(-(a)))
145#endif
146
147/* Macros to get at offsets within smb_lkrng and smb_unlkrng
148 structures. We cannot define these as actual structures
149 due to possible differences in structure packing
150 on different machines/compilers. */
151
152#define SMB_LPID_OFFSET(indx) (10 * (indx))
153#define SMB_LKOFF_OFFSET(indx) ( 2 + (10 * (indx)))
154#define SMB_LKLEN_OFFSET(indx) ( 6 + (10 * (indx)))
155#define SMB_LARGE_LPID_OFFSET(indx) (20 * (indx))
156#define SMB_LARGE_LKOFF_OFFSET_HIGH(indx) (4 + (20 * (indx)))
157#define SMB_LARGE_LKOFF_OFFSET_LOW(indx) (8 + (20 * (indx)))
158#define SMB_LARGE_LKLEN_OFFSET_HIGH(indx) (12 + (20 * (indx)))
159#define SMB_LARGE_LKLEN_OFFSET_LOW(indx) (16 + (20 * (indx)))
160
161#define ERROR_DOS(class,code) error_packet(outbuf,class,code,NT_STATUS_OK,__LINE__,__FILE__)
162#define ERROR_NT(status) error_packet(outbuf,0,0,status,__LINE__,__FILE__)
163#define ERROR_FORCE_NT(status) error_packet(outbuf,-1,-1,status,__LINE__,__FILE__)
164#define ERROR_BOTH(status,class,code) error_packet(outbuf,class,code,status,__LINE__,__FILE__)
165
166#define reply_nterror(req,status) reply_nt_error(req,status,__LINE__,__FILE__)
167#define reply_force_nterror(req,status) reply_force_nt_error(req,status,__LINE__,__FILE__)
168#define reply_doserror(req,eclass,ecode) reply_dos_error(req,eclass,ecode,__LINE__,__FILE__)
169#define reply_botherror(req,status,eclass,ecode) reply_both_error(req,eclass,ecode,status,__LINE__,__FILE__)
170#define reply_unixerror(req,defclass,deferror) reply_unix_error(req,defclass,deferror,NT_STATUS_OK,__LINE__,__FILE__)
171
172#if 0
173/* defined in IDL */
174/* these are the datagram types */
175#define DGRAM_DIRECT_UNIQUE 0x10
176#endif
177
178#define SMB_ROUNDUP(x,r) ( ((x)%(r)) ? ( (((x)+(r))/(r))*(r) ) : (x))
179
180/* Extra macros added by Ying Chen at IBM - speed increase by inlining. */
181#define smb_buf(buf) (((char *)(buf)) + smb_size + CVAL(buf,smb_wct)*2)
182#define smb_buflen(buf) (SVAL(buf,smb_vwv0 + (int)CVAL(buf, smb_wct)*2))
183
184/* the remaining number of bytes in smb buffer 'buf' from pointer 'p'. */
185#define smb_bufrem(buf, p) (smb_buflen(buf)-PTR_DIFF(p, smb_buf(buf)))
186
187/* Note that chain_size must be available as an extern int to this macro. */
188#define smb_offset(p,buf) (PTR_DIFF(p,buf+4) + chain_size)
189
190#define smb_len(buf) (PVAL(buf,3)|(PVAL(buf,2)<<8)|((PVAL(buf,1)&1)<<16))
191#define _smb_setlen(buf,len) do { buf[0] = 0; buf[1] = ((len)&0x10000)>>16; \
192 buf[2] = ((len)&0xFF00)>>8; buf[3] = (len)&0xFF; } while (0)
193
194#define smb_len_large(buf) (PVAL(buf,3)|(PVAL(buf,2)<<8)|(PVAL(buf,1)<<16))
195#define _smb_setlen_large(buf,len) do { buf[0] = 0; buf[1] = ((len)&0xFF0000)>>16; \
196 buf[2] = ((len)&0xFF00)>>8; buf[3] = (len)&0xFF; } while (0)
197
198#define ENCRYPTION_REQUIRED(conn) ((conn) ? ((conn)->encrypt_level == Required) : false)
199#define IS_CONN_ENCRYPTED(conn) ((conn) ? (conn)->encrypted_tid : false)
200
201/*******************************************************************
202find the difference in milliseconds between two struct timeval
203values
204********************************************************************/
205
206#define TvalDiff(tvalold,tvalnew) \
207 (((tvalnew)->tv_sec - (tvalold)->tv_sec)*1000 + \
208 ((int)(tvalnew)->tv_usec - (int)(tvalold)->tv_usec)/1000)
209
210/****************************************************************************
211true if two IPv4 addresses are equal
212****************************************************************************/
213
214#define ip_equal_v4(ip1,ip2) ((ip1).s_addr == (ip2).s_addr)
215
216/*****************************************************************
217 splits out the last subkey of a key
218 *****************************************************************/
219
220#define reg_get_subkey(full_keyname, key_name, subkey_name) \
221 split_at_last_component(full_keyname, key_name, '\\', subkey_name)
222
223/****************************************************************************
224 Return True if the offset is at zero.
225****************************************************************************/
226
227#define dptr_zero(buf) (IVAL(buf,1) == 0)
228
229/*******************************************************************
230copy an IP address from one buffer to another
231********************************************************************/
232
233#define putip(dest,src) memcpy(dest,src,4)
234
235/*******************************************************************
236 Return True if a server has CIFS UNIX capabilities.
237********************************************************************/
238
239#define SERVER_HAS_UNIX_CIFS(c) ((c)->capabilities & CAP_UNIX)
240
241/****************************************************************************
242 Make a filename into unix format.
243****************************************************************************/
244
245#define IS_DIRECTORY_SEP(c) ((c) == '\\' || (c) == '/')
246#define unix_format(fname) string_replace(fname,'\\','/')
247#define unix_format_w(fname) string_replace_w(fname, UCS2_CHAR('\\'), UCS2_CHAR('/'))
248
249/****************************************************************************
250 Make a file into DOS format.
251****************************************************************************/
252
253#define dos_format(fname) string_replace(fname,'/','\\')
254
255/*****************************************************************************
256 Check to see if we are a DC for this domain
257*****************************************************************************/
258
259#define IS_DC (lp_server_role()==ROLE_DOMAIN_PDC || lp_server_role()==ROLE_DOMAIN_BDC)
260
261/*****************************************************************************
262 Safe allocation macros.
263*****************************************************************************/
264
265#define SMB_MALLOC_ARRAY(type,count) (type *)malloc_array(sizeof(type),(count))
266#define SMB_MEMALIGN_ARRAY(type,align,count) (type *)memalign_array(sizeof(type),align,(count))
267#define SMB_REALLOC(p,s) Realloc((p),(s),True) /* Always frees p on error or s == 0 */
268#define SMB_REALLOC_KEEP_OLD_ON_ERROR(p,s) Realloc((p),(s),False) /* Never frees p on error or s == 0 */
269#define SMB_REALLOC_ARRAY(p,type,count) (type *)realloc_array((p),sizeof(type),(count),True) /* Always frees p on error or s == 0 */
270#define SMB_REALLOC_ARRAY_KEEP_OLD_ON_ERROR(p,type,count) (type *)realloc_array((p),sizeof(type),(count),False) /* Never frees p on error or s == 0 */
271#define SMB_CALLOC_ARRAY(type,count) (type *)calloc_array(sizeof(type),(count))
272#define SMB_XMALLOC_P(type) (type *)smb_xmalloc_array(sizeof(type),1)
273#define SMB_XMALLOC_ARRAY(type,count) (type *)smb_xmalloc_array(sizeof(type),(count))
274
275/* The new talloc is paranoid malloc checker safe. */
276
277#if 0
278
279Disable these now we have checked all code paths and ensured
280NULL returns on zero request. JRA.
281
282#define TALLOC(ctx, size) talloc_zeronull(ctx, size, __location__)
283#define TALLOC_P(ctx, type) (type *)talloc_zeronull(ctx, sizeof(type), #type)
284#define TALLOC_ARRAY(ctx, type, count) (type *)_talloc_array_zeronull(ctx, sizeof(type), count, #type)
285#define TALLOC_MEMDUP(ctx, ptr, size) _talloc_memdup_zeronull(ctx, ptr, size, __location__)
286#define TALLOC_ZERO(ctx, size) _talloc_zero_zeronull(ctx, size, __location__)
287#define TALLOC_ZERO_P(ctx, type) (type *)_talloc_zero_zeronull(ctx, sizeof(type), #type)
288#define TALLOC_ZERO_ARRAY(ctx, type, count) (type *)_talloc_zero_array_zeronull(ctx, sizeof(type), count, #type)
289#define TALLOC_SIZE(ctx, size) talloc_zeronull(ctx, size, __location__)
290#define TALLOC_ZERO_SIZE(ctx, size) _talloc_zero_zeronull(ctx, size, __location__)
291
292#else
293
294#define TALLOC(ctx, size) talloc_named_const(ctx, size, __location__)
295#define TALLOC_P(ctx, type) (type *)talloc_named_const(ctx, sizeof(type), #type)
296#define TALLOC_ARRAY(ctx, type, count) (type *)_talloc_array(ctx, sizeof(type), count, #type)
297#define TALLOC_MEMDUP(ctx, ptr, size) _talloc_memdup(ctx, ptr, size, __location__)
298#define TALLOC_ZERO(ctx, size) _talloc_zero(ctx, size, __location__)
299#define TALLOC_ZERO_P(ctx, type) (type *)_talloc_zero(ctx, sizeof(type), #type)
300#define TALLOC_ZERO_ARRAY(ctx, type, count) (type *)_talloc_zero_array(ctx, sizeof(type), count, #type)
301#define TALLOC_SIZE(ctx, size) talloc_named_const(ctx, size, __location__)
302#define TALLOC_ZERO_SIZE(ctx, size) _talloc_zero(ctx, size, __location__)
303
304#endif
305
306#define TALLOC_REALLOC(ctx, ptr, count) _talloc_realloc(ctx, ptr, count, __location__)
307#define TALLOC_REALLOC_ARRAY(ctx, ptr, type, count) (type *)_talloc_realloc_array(ctx, ptr, sizeof(type), count, #type)
308#define talloc_destroy(ctx) talloc_free(ctx)
309#define TALLOC_FREE(ctx) do { if ((ctx) != NULL) {talloc_free(ctx); ctx=NULL;} } while(0)
310
311/* only define PARANOID_MALLOC_CHECKER with --enable-developer */
312
313#if defined(DEVELOPER)
314# define PARANOID_MALLOC_CHECKER 1
315#endif
316
317#if defined(PARANOID_MALLOC_CHECKER)
318
319#define PRS_ALLOC_MEM(ps, type, count) (type *)prs_alloc_mem_((ps),sizeof(type),(count))
320
321/* Get medieval on our ass about malloc.... */
322
323/* Restrictions on malloc/realloc/calloc. */
324#ifdef malloc
325#undef malloc
326#endif
327#define malloc(s) __ERROR_DONT_USE_MALLOC_DIRECTLY
328
329#ifdef realloc
330#undef realloc
331#endif
332#define realloc(p,s) __ERROR_DONT_USE_REALLOC_DIRECTLY
333
334#ifdef calloc
335#undef calloc
336#endif
337#define calloc(n,s) __ERROR_DONT_USE_CALLOC_DIRECTLY
338
339#ifdef strndup
340#undef strndup
341#endif
342#define strndup(s,n) __ERROR_DONT_USE_STRNDUP_DIRECTLY
343
344#ifdef strdup
345#undef strdup
346#endif
347#define strdup(s) __ERROR_DONT_USE_STRDUP_DIRECTLY
348
349#define SMB_MALLOC(s) malloc_(s)
350#define SMB_MALLOC_P(type) (type *)malloc_(sizeof(type))
351
352#define SMB_STRDUP(s) smb_xstrdup(s)
353#define SMB_STRNDUP(s,n) smb_xstrndup(s,n)
354
355#else
356
357#define PRS_ALLOC_MEM(ps, type, count) (type *)prs_alloc_mem((ps),sizeof(type),(count))
358
359/* Regular malloc code. */
360
361#define SMB_MALLOC(s) malloc(s)
362#define SMB_MALLOC_P(type) (type *)malloc(sizeof(type))
363
364#define SMB_STRDUP(s) strdup(s)
365#define SMB_STRNDUP(s,n) strndup(s,n)
366
367#endif
368
369#define ADD_TO_ARRAY(mem_ctx, type, elem, array, num) \
370do { \
371 *(array) = ((mem_ctx) != NULL) ? \
372 TALLOC_REALLOC_ARRAY(mem_ctx, (*(array)), type, (*(num))+1) : \
373 SMB_REALLOC_ARRAY((*(array)), type, (*(num))+1); \
374 SMB_ASSERT((*(array)) != NULL); \
375 (*(array))[*(num)] = (elem); \
376 (*(num)) += 1; \
377} while (0)
378
379#define ADD_TO_LARGE_ARRAY(mem_ctx, type, elem, array, num, size) \
380 add_to_large_array((mem_ctx), sizeof(type), &(elem), (void *)(array), (num), (size));
381
382#ifndef ISDOT
383#define ISDOT(p) (*(p) == '.' && *((p) + 1) == '\0')
384#endif /* ISDOT */
385
386#ifndef ISDOTDOT
387#define ISDOTDOT(p) (*(p) == '.' && *((p) + 1) == '.' && *((p) + 2) == '\0')
388#endif /* ISDOTDOT */
389
390#ifndef toupper_ascii_fast
391/* Warning - this must only be called with 0 <= c < 128. IT WILL
392 * GIVE GARBAGE if c > 128 or c < 0. JRA.
393 */
394extern char toupper_ascii_fast_table[];
395#define toupper_ascii_fast(c) toupper_ascii_fast_table[(unsigned int)(c)];
396#endif
397
398#endif /* _SMB_MACROS_H */
Note: See TracBrowser for help on using the repository browser.