source: rxprtutl/trunk/notes@ 14

Last change on this file since 14 was 14, checked in by Alex Taylor, 12 years ago

Added RPUPortInfo function.
File size: 10.3 KB
RevLine 
[13]1Using RPUPortQuery & RPUPortSet
2===============================
[3]3
[13]4These functions return or accept a buffer (passed as a REXX string) which
5contains the current port configuration data as raw bytes. The format of
6this data depends on the port driver which controls the particular port
7being queried or set.
8
9The data formats for several common port drivers are described below.
10
11NOTE: All data must be in raw byte (or 'character') form. This is the form
12 outputted by functions like D2C() or X2C().
13
14 In addition, multi-byte integer values like (U)LONG and (U)SHORT must
15 be passed in little-endian order.
16
17 i.e.
18 To convert <number> to USHORT: ushort = REVERSE( X2C( D2X( number, 4 )))
19 To convert <number> to ULONG: ulong = REVERSE( X2C( D2X( number, 8 )))
20
[14]21 Fixed-length string (character array) fields MUST append a 0 byte to
22 the end of the string value, and SHOULD pad the rest of the array (up
23 to the defined length) with 0 bytes as well.
[13]24
[14]25
[13]26SERIAL.PDR, PARALLEL.PDR
27------------------------
28
[3]29The standard serial and parallel port drivers do not support the SplPdSet API.
30
31
[13]32PAR1284.PDR
33-----------
34
35The high-speed BIDI parallel port (PAR1284) driver uses a data structure with
36the following format (information taken from IBM DDK headers):
37
38typedef struct _PORTSETTINGS{
[3]39 ULONG signature; /* Must be 0x52464E49 ('INFR') */
40 ULONG ulVersion; /* Must be 0x00000001 */
41 ULONG flStatus; /* Status flags: */
42 /* 0x00000001 BIDI_Q_PORT set (bidi enabled)*/
43 /* 0x00000002 Set after 1st attempt at bidi */
44 /* 0x00000004 Port connected to print queue */
45 /* 0x00000008 Port already open */
46 /* 0x00000010 Port open in progress */
47 /* 0x00000020 SplPdOpen being processed */
48 /* 0x00000040 SplPdClose being processed */
49 /* 0x00000080 XlateCmd has more alerts left */
50 /* 0x00000100 New printer or powered off */
51 /* 0x00000200 Set when deviceId was checked */
52 /* after first good write to a */
53 /* unidirectional printer. */
54 /* 0x00000400 Set when last write was sent */
55 /* using ECP mode cmd channel. */
56 /* 0x00000800 Set when printer put in bidi */
57 /* mode and DeviceID received. */
58 /* 0x00001000 Set when CommStatChange alert */
59 /* was posted to spooler. */
60 /* Cleared after BIDI_Q_PORT */
61 /* 0x00002000 Set when CommStatChange alert */
62 /* should not be set */
63 /* 0x00004000 Set when port has a network */
64 /* connection */
65 ULONG flBidiCapabilities; /* PRTPORT.flBidiCapabilities _CAPS_ */
66 ULONG flBidiProtocol; /* PRTPORT.flBidiProtocol _TYPE_ */
67 ULONG flJob; /* PRTSW.flJob flags */
68 ULONG flDevice; /* PRTSW.flDevice flags */
69 ULONG ulModeSelected; /* Mode selected by user(see PARMODE_) */
70 ULONG ulCurrentMode; /* Current mode of port(see CURMODE_) */
71 BOOL fShareAccess; /* Share port with DOS/Windows */
72 ULONG ulPrintTimeOut; /* Seconds to continue to retry job */
73 /* write request in SplPdWrite(). */
74 /* Default: 45 seconds */
75 ULONG ulNoQueryTimeOut; /* Seconds from last query until */
76 /* port drops printer connection */
77 /* Default: 180 seconds */
78 ULONG ulNoJobTimeOut; /* Seconds from last job sent until */
79 /* port drops printer connection */
80 /* NOTE: Connection can be dropped */
81 /* sooner if PDR receives */
82 /* BIDI_NOTIFY_ENDJOBCONNECT */
83 /* This is used if we lose */
84 /* a job acknowledgement so */
85 /* that other Apps can use the */
86 /* infrared port. */
87 /* Default: 300 seconds */
88 /* */
89 PPTIMEOUTCHANNEL TimeOut; /* Read and Write timeouts */
90 /* */
91 /* */
92 /* The following ulpsz fields are */
93 /* offsets from the beginning of */
94 /* this PORTSETTINGS structure to */
95 /* the variable length strings. */
96 /* This allows us to pass the buffer */
97 /* intact to PrtQuery and PrtSet, */
98 /* even across the network. */
99 /* All strings are packed immediately */
100 /* after the fixed-length PORTSETTINGS */
101 /* structure. */
102 /* */
103 /* An offset of 0 means no string */
104 /* */
105 ULONG ulpszPortName; /* -> name of port info is for */
106 ULONG ulpszDeviceID; /* -> 1284 deviceID for printer on port */
107} PORTSETTINGS, *PPORTSETTINGS;
108
[13]109/* Structure for setting timeouts */
110/* */
111/* This port driver will assume that bidi capable printers can accept */
112/* data at a reasonable rate, so the WriteIdle timeout will default to a */
113/* small value(like 15 seconds). The actual WriteTimeout specified by */
114/* the user can be larger, and our PdWrite API will handle retrying */
115/* requests that do not complete. However, we will always have a */
116/* ParReadThread for each bidi port, and this read will typically be */
117/* queued up after the write. When a write completes(even if only */
118/* partial buffer was sent), the queued read request will reverse the */
119/* channel and check for data coming from the printer. This read must */
120/* not take a long time(to avoid performance degradation for writes). */
121/* */
122/* We set a small ReadInterrupt timeout( about 200 ms default ) so that */
123/* if no data is waiting to be read, the read request returns and lets */
124/* the write request be processed. */
125/* */
126/* We set a longer ReadIdle timeout( 1000 ms ) to attempt to get the */
127/* entire buffer from the peripheral if there is data waiting to be sent */
128/* to the host. */
129/* */
130/* For now, we set the WriteIdle and WriteInterrupt timeouts to be the */
131/* same. This means we will always return within the WriteIdle timeout */
132/* value specified. */
133/* */
[3]134typedef struct _PPTIMEOUTCHANNEL{
135 ULONG ulReadIdleTimeOut; // millisecs DD has to complete entire Read
136 ULONG ulReadIntTimeOut; // millisecs DD waits for Read interrupt
137 ULONG ulWriteIdleTimeOut; // millisecs DD has to complete entire Write
138 ULONG ulWriteIntTimeOut; // millisecs DD waits for Write interrupt
139 ULONG ulLogChannel; // 1=use data channel, 2=use address channel
140} PPTIMEOUTCHANNEL, *PPPTIMEOUTCHANNEL;
141
[13]142(Refer to the header file wpshell\src\wpsh\par1284\pdrtypes.h from the IBM
143DDK for more information.)
[3]144
145
[13]146CUPS.PDR
147--------
[3]148
[13]149The eCups port driver (CUPS.PDR) uses the following port settings structure:
[3]150
151typedef struct _PORTSETTINGS {
152 CHAR szHost[ 65 ]; // CUPS server hostname/IP
153 CHAR szQueue[ 65 ]; // CUPS printer queue name
154} PORTSETTINGS, *PPORTSETTINGS;
155
[13]156(At least version 1.04 of CUPS.PDR is required.)
[3]157
158
[13]159SMB.PDR
160-------
[3]161
[13]162The Samba port driver (SMB.PDR) takes a single 256-byte buffer. This
163buffer must take the following format:
[3]164
[13]165 host#printer#workgroup#userid#copies#password
166
167All fields are required; those whose values are unspecified must be left
168empty. (Replace each field name above with its corresponding value.)
169The buffer is padded with 0 bytes to a length of 256 as needed.
170
171The 'password' field is a hexadecimal string; all others are standard
172character strings.
173
174For example, to set the following configuration:
175 host: PRINTSRV
176 printer: LJET01
177 workgroup: <none>
178 userid: mrmuffin
179 password: blueberry
180 copies: 1
181
182In REXX:
183 params = 'PRINTSRV#LJET01##mrmuffin#1#626C75656265727279'
184 IF LENGTH( params <= 256 ) THEN DO
185 buffer = params || COPIES('00'x, 256 - LENGTH( params ))
186 CALL RPUPortSet 'SMB', buffer
187 END
188
[14]189(At least version 1.03 of SMB.PDR is required.)
190
Note: See TracBrowser for help on using the repository browser.