source: diffs/0.4.6_GA.diff@ 146

E:\trees\qpdfview\trunk

@@ +1 @@
+/* qpdfview Build Script */
+/* version history */
+/* version 0.1.0 from 25.03.2013 Silvan (first edition) */
+/* version 0.1.1 from 25.04.2013 Silvan (new poppler lib) */
+/* version 0.1.2 from 29.05.2013 Silvan (application version from qpdfview.pri) */
+/* version 0.1.3 from 17.06.2013 Silvan (added .ps support) */
+/* version 0.1.4 from 08.08.2013 Silvan (new poppler lib) */
+/* version 0.1.5 from 20.08.2013 Silvan (added diff option) */
+/* version 0.1.6 from 15.10.2013 Silvan (copy all help*.html) */
+
+/* init the version string (don't forget to change) */
+version = "0.1.6"
+version_date = "15.10.2013"
+popplerDll = 'popp43.dll'
+popplerDllQt = 'poppqt44.dll'
+popplerDir = 'e:\trees\poppler\trunk'
+'@echo off'
+
+parse arg command option
+parse source . . scriptFile
+
+/* init the required vars */
+qRC = 0
+mRC = 0
+buildDir    = strip(directory(),'T','\') /* Make sure we have no trailing backslash */
+sourceDir = FixDir(filespec('D', scriptFile) || filespec('P', scriptFile))
+vendorDir  = sourceDir || '\..\vendor\current'
+diffDir    = sourceDir || '\..\'
+srcDir     = sourceDir
+OS2Dir     = sourceDir
+installDir = buildDir || '\install'
+installDirT= installDir || '\data'
+qErrorFile = buildDir||'\qmake.err'
+qOutFile   = buildDir||'\qmake.out'
+mErrorFile = buildDir||'\make.err'
+mOutFile   = buildDir||'\make.out'
+
+/* get the Qpdfview version */
+Qpdfview_version = '0.0.0'
+Qpdfview_build = ' '
+call version
+internal_build = translate(Qpdfview_version, '_', '.')
+
+title = "Qpdfview for eCS (OS/2) build script v" || version || " from " || version_date
+say title
+say
+say "Build directory:" buildDir
+say "Source directory:" sourceDir
+say
+say "Qpdfview version:" Qpdfview_version
+say "         build:  " Qpdfview_build 
+say
+
+/* translate command to all upercase */
+command = translate(command)
+
+if command = "" then signal help
+
+
+if command = "INSTALL" then do
+    if option \== "" then do
+        Qpdfview_build = option
+    end
+    select
+        when Qpdfview_build \== "" then do
+          zipFile = installDir || '\qpdfview-' || internal_build || '-' || Qpdfview_build || '.zip'
+        end
+        otherwise do
+          signal help
+        end
+    end 
+end
+
+/* now we translate also the option */
+option = translate(option)
+
+if sourceDir \== buildDir then do
+    say "Shadow build in progress ..."
+    say
+end
+
+say "Executing command: "command option
+
+select
+    when command = "MAKE" & option = "CLEAN" then do
+
+        say "cleaning the tree"
+        call make 'distclean'
+
+        say "please execute this script again with 'make' to build Qpdfview"
+
+    end
+    when command = "MAKE" then do
+
+        say "creating Qpdfview makefile"
+        call qmake
+
+        if qRC = 0 then do
+            say "building Qpdfview"
+            if option = "" then do
+                call make
+            end
+            else do
+                call make 'debug'
+            end
+        end
+
+    end
+
+    when command = "INSTALL" then do
+
+/* first delete everything */
+        call deleteall
+
+/* create the installDir,and the translation subdir */
+        ok = SysMkDir(installDir)
+        ok = SysMkDir(installDirT)
+
+/* copy the exe */
+        ok = SysCopyObject(buildDir||'\Qpdfview.exe',installDir)
+
+/* copy all dll */
+        ok = SysFileTree(buildDir||'\*.dll', rm.,'FOS')
+        do i = 1 to rm.0
+          ok = SysCopyObject(rm.i, installDir)
+        end
+
+/* copy the readme */
+        rm.0 = 1
+        rm.1 = 'install.os2'
+        do i = 1 to rm.0
+        cmdtorun = 'sed "s;_VERSION_;' || Qpdfview_version || ';g" ' || os2Dir || '\' || rm.i || ' | sed "s;_BUILD_;' || Qpdfview_build || ';g" >' || installDir || '\' || rm.i
+        address cmd cmdtorun
+        end
+
+/* copy different stuff */
+        rm.0 = 5
+        rm.1 = 'CHANGES'
+        frmDir.1 = os2Dir
+        toDir.1 = installDir
+        rm.2 = 'help*.html'
+        frmDir.2 = os2Dir || '\miscellaneous'
+        toDir.2 = installDirT
+        rm.3 = popplerDll
+        frmDir.3 = popplerDir || '\poppler\.libs'
+        toDir.3 = installDir
+        rm.4 = popplerDllQt
+        frmDir.4 = popplerDir || '\qt4\src\.libs'
+        toDir.4 = installDir
+        rm.5 = 'tiff.dll'
+        frmDir.5 = 'e:\trees\libtiff\trunk\libtiff\.libs'
+        toDir.5 = installDir
+        do i = 1 to rm.0
+        cmdtorun = 'copy ' || frmDir.i || '\' || rm.i || ' ' || toDir.i
+        address cmd cmdtorun
+        end
+
+/* create the qm files from ts files */
+        ok = SysFileTree(srcDir||'\translations\*.ts', rm.,'FO')
+        do i = 1 to rm.0
+            fileName = filespec('N',rm.i)
+            fileName = left(fileName,lastpos('.', fileName)-1) || '.qm'
+            cmdtorun = 'lrelease ' || rm.i || ' -qm ' || installDirT || '\' || fileName
+            address cmd cmdtorun
+        end
+
+/* zip all dynamic stuff */
+        ok = directory(installDir)
+        cmdtorun = 'zip -r ' || zipFile || ' * -x *.zip'
+        address cmd cmdtorun
+        ok = directory(buildDir)
+
+/* zip all icons */
+
+    end
+
+    when command = "UNINSTALL" then do
+
+        call deleteall
+        
+    end
+
+    when command = "DIFF" then do
+
+        address cmd 'diff -Naur ' || vendorDir || ' ' || sourceDir || ' -x qpdfview.desktop > ' || diffDir || Qpdfview_version || '_' || Qpdfview_build || '.diff'
+        
+    end
+
+    otherwise do
+        say 'Unknown parameter "'command'" - aborting...'
+        exit 1
+    end
+end
+
+/* cleanup the mess */
+error:
+
+if qRC = 0 & mRC = 0 then do
+    ok = SysFileDelete(mOutFile)
+    ok = SysFileDelete(mErrorFile)
+    ok = SysFileDelete(qOutFile)
+    ok = SysFileDelete(qErrorFile)
+end
+else do
+    if mRC <> 0 then do
+        say "Alarm! Make errors occured! Look at "mOutFile" and "mErrorFile
+    end
+    if qRC <> 0 then do
+        say "Alarm! qMake errors occured! Look at "qOutFile" and "qErrorFile
+    end
+end
+
+exit 0
+
+qmake:
+    sourceFile = sourceDir || '/qpdfview.pro'
+    address cmd 'qmake "CONFIG+=without_pkgconfig" "CONFIG+=without_dbus" "CONFIG+=without_magic" ' sourceFile ' 2>'qErrorFile' 1>'qOutFile
+
+    qRC = RC
+    if qRC <> 0 then do
+        call beep 880, 20
+        say "Alarm! qmake RC="RC
+    end
+return
+
+make:
+    makeparm = arg(1)
+    address cmd 'make 'makeparm' 2>'mErrorFile' 1>'mOutFile
+    mRC = RC
+    if mRC <> 0 then do
+        call beep 880, 20
+        say "Alarm! make RC="RC
+    end
+return
+
+
+deleteall: /* delete installDir (including subdirs) except zip files */
+
+    say "Delete all files except *zip in " installDir
+    ok = SysFileTree(installDir||'\*', rm.,'FOS')
+    do i = 1 to rm.0
+       if translate(right(rm.i, 3)) \== 'ZIP' then do
+          ok = SysFileDelete(rm.i)
+       end
+    end
+
+    say "Delete zip file " zipFile
+    ok = SysFileDelete(zipFile)
+
+    say "Removing subdirs from " || installDir
+    ok = SysFileTree(installDir||'\*', rm.,'OS')
+    do i = 1 to rm.0
+       ok = SysRmDir(rm.i)
+    end
+
+    call SysSleep(5)
+return
+
+/**
+ *  Fixes the directory path by a) converting all slashes to back
+ *  slashes and b) ensuring that the trailing slash is present if
+ *  the directory is the root directory, and absent otherwise.
+ *
+ *  @param dir      the directory path
+ *  @param noslash
+ *      optional argument. If 1, the path returned will not have a
+ *      trailing slash anyway. Useful for concatenating it with a
+ *      file name.
+ */
+FixDir: procedure expose (Globals)
+    parse arg dir, noslash
+    noslash = (noslash = 1)
+    dir = translate(dir, '\', '/')
+    if (right(dir, 1) == '\' &,
+        (noslash | \(length(dir) == 3 & (substr(dir, 2, 1) == ':')))) then
+        dir = substr(dir, 1, length(dir) - 1)
+    return dir
+
+/**
+ *  reads the version.cpp and gets the Qpdfview version from there
+ */ 
+version: procedure expose Qpdfview_version Qpdfview_build srcDir
+
+    QpdfviewVer = ' '
+    /* Qpdfview Version file */
+    Version = srcDir || "\qpdfview.pri"
+
+    do until lines(Version) = 0
+        verline = linein(Version)
+        if substr(Verline,30,19) = "APPLICATION_VERSION" then do
+            parse var verline . ' '. ' ' QpdfviewVer
+        end
+    end
+
+    ok = stream(Version,'c','close')
+    if QpdfviewVer \== ' ' then do
+        QpdfviewVer = strip(QpdfviewVer,,'"')
+        parse var QpdfviewVer ver '.' maj '.' min '.' Qpdfview_build
+        Qpdfview_version = ver || '.'|| maj || '.' || min
+    end
+
+    if Qpdfview_build == '' then do
+        Qpdfview_build = 'GA'
+    end
+
+    return
+
+help:
+    say "Parameters:"
+    say "    make"
+    say "    make debug"
+    say "    make clean"
+    say "    install build (build overwrites what this script finds)"
+    say "    uninstall"
+    say "    diff (creates a diff from vendor to trunk)"
+exit 255

E:\trees\qpdfview\trunk

@@ +1 @@
+Qpdfview _VERSION_ _BUILD_ installation
+
+
+0. CONTENTS OF THIS FILE
+========================
+
+1. INTRODUCTION
+
+2. REQUIREMENTS
+
+3. INSTALLATION
+
+4. BUGREPORTS
+
+5. CREDITS
+
+6. SUPPORT AND DONATIONS
+
+7. HISTORY
+
+
+1. INTRODUCTION
+===============
+
+Welcome to Qpdfview _VERSION_ _BUILD_ port for OS/2 and eComStation.
+
+
+2. REQUIREMENTS
+===============
+
+The following requirements need to be installed.
+
+
+2.1 kLIBC, GCC4Core, Qt4, Zlib, cups
+------------------------------------
+
+The installation of these products can be done either by RPM or ZIP files.
+
+2.1.a RPM installation
+----------------------
+
+kLIBC
+-----
+
+  1. yum install libc
+
+GCC4Core
+--------
+
+  1. yum install libgcc4*
+  2. yum install gcc-stack-protector
+  3. yum install gcc-stdc++-shared-library
+  4. yum install gcc-supc++-shared-library
+
+Qt4 dll
+-------
+
+  1. yum install libqt4
+  2. Install the xsystray plugin as noted in the readme.os2 and also in
+     readme.xsystray
+
+Zlib
+----
+
+  1. yum install zlib
+
+Jpeg
+----
+
+  1. yum install libjpeg
+
+djvulibre
+---------
+
+  not available as a rpm at this time of writing
+
+cups
+----
+
+  not available as a rpm at this time of writing
+
+freetype/fontconfig
+-------------------
+
+  not available as a rpm at this time of writing
+
+ghstscript
+----------
+
+  not available as a rpm at this time of writing
+
+pthread
+-------
+
+  1. yum install pthread
+
+
+2.1.b ZIP Installation
+----------------------
+
+kLIBC
+-----
+
+  1. Download kLIBC 0.6.5 or better (see http://svn.netlabs.org/libc for more
+     information)
+  2. Install the files to your libpath eg x:\ecs\dll
+
+GCC4Core
+--------
+
+  1. Download GCC4Core 1.2.1 or better from http://ftp.netlabs.org/pub/gcc
+  2. Install the files to your libpath eg. x:\ecs\dll
+
+Qt4 dll
+-------
+
+  1. Download Qt4 4.7.3 or better (see http://svn.netlabs.org/qt4 for more 
+     information)
+  2. Install the files according to the readme
+  3. Install the xsystray plugin as noted in the readme.os2 and also in 
+     readme.xsystray
+
+Zlib
+----
+
+  1. Download zlib from http://rpm.netlabs.org/release/00/zip
+  2. Unpack and install z.dll to your libpath eg. x:\ecs\dll
+
+Jpeg
+----
+
+  1. Download jpeg from http://rpm.netlabs.org/release/00/zip
+  2. Unpack and install jpeg.dll to your libpath eg. x:\ecs\dll
+
+djvulibre
+---------
+
+  1. Download djvulibre from ftp://ftp.netlabs.org/pub/unixos2/djvulibre-3_5_25.zip
+  2. Unpack and install djvu.dll to your libpath eg. x:\ecs\dll
+
+cups
+----
+
+  1. Go to eCUPS wiki to see how to install eCUPS (http://svn.netlabs.org/ecups)
+  2. Install eCUPS according to the above wiki
+
+freetype/fontconfig
+-------------------
+
+  1. Download MZFNTCFGFT_RUNTIME as zip or wpi from 
+     ftp://ftp.netlabs.org/incoming/mozilla
+  2. Unpack and install it to your libpath eg. x:\ecs\dll
+
+ghostscript
+-----------
+
+  1. Download ghostscript as zip from ftp://ftp.netlabs.org/pub/unixos2/gs871os2.zip
+  2. Unpack and install the gsdll23.dll to your libpath eg. x:\ecs\dll
+     (note this ghostscript it right now not compatible with P. Smedley's port)
+
+pthread
+-------
+
+  1. Download pthread from http://rpm.netlabs.org/release/00/zip
+  2. Unpack and install z.dll to your libpath eg. x:\ecs\dll
+ 
+
+3. INSTALLATION
+===============
+          
+To install qpdfview, do the following:
+
+  1. Create a directory for qpdfview.
+  2. Extract the qpdfview package to the new directory.
+  3. Create a WPS object for qdpfview.exe.
+  4. Start qdpfview
+  5. Happy using it
+  6. If you want to use qpdfview from within a browser, you have to copy
+     popp*.dll and tiff.dll to the libpath eg. x:\ecs\dll
+
+If you have tried to open a file and not all requirements have been there at
+this try, Qt screwed his plugin cache.
+To overcome that delete %HOME%/.config/Trolltech.ini. It will be created again
+when a Qt app starts.
+
+Optional: to have special fonts working you need poppler-data pack.
+
+  - extract the 4 directories from the package found on http://poppler.freedesktop.org
+    to your %unixroot%/usr/local/share/poppler or to the dir where lucide.exe is installed
+  - if you also want japanese fonts working, take care that the "Times New Roman WT J" font
+    is installed. This font is used as a fallback
+  
+
+4. BUGREPORTS
+=============
+
+Please create bugreports at http://svn.netlabs.org/qtapps
+Only bug reports with a reproducable bug are accepted. :-)
+
+
+5. CREDITS
+==========
+
+The port was done by:
+
+Silvan Scherrer aka _diver
+
+Thanks go to:
+
+  * Dmitriy Kuminov
+
+They either helped me when I had some nasty questions or did some testing for
+me.
+
+
+6. SUPPORT AND DONATIONS
+========================
+
+qpdfview port is based on volunteer work. If you would like to support further
+development, you can do so in one of the following ways:
+
+
+  * Donate to the Qt4 project: see qt.netlabs.org for more information
+
+  * Contribute to the project: Besides actual development, this also includes
+    maintaining the documentation and the project web site as well as help
+    for users.
+
+
+7. HISTORY
+==========
+
+2013-10-15
+
+  * udated to latest qpdfview 0.4.6 source
+
+2013-08-14
+
+  * updated to latest qpdfview 0.4.4.99 source
+  * updated to latest poppler 0.24.0
+
+2013-06-17
+
+  * added .ps and .eps file support
+
+2013-05-27
+
+  * updated to latest qpdfview 0.4.3 source
+
+2013-05-14
+
+  * updated to latest qpdfview 0.4.3 beta source
+
+2013-04-25
+
+  * updated to latest poppler 0.22.3
+
+2013-04-19
+
+  * updated to latest qpdfview 0.4.2 beta source
+
+2013-03-25
+
+  * updated to latest qpdfview 0.4.1 source
+
+2013-03-20
+
+  * updated to latest qpdfview 0.4.1 beta source
+
+2013-02-19
+
+  * updated to latest qpdfview 0.4.0 source
+
+2013-02-12
+
+  * updated to latest qpdfview 0.4.0 beta1 source
+
+2013-02-06
+
+  * updated to latest qpdfview 0.3.7 source
+
+2013-01-14
+
+  * updated to latest poppler 0.22.0
+
+2012-12-13
+
+  * updated to latest qpdfview 0.3.7 beta 1 source
+
+2012-11-27
+
+  * updated to latest qpdfview source
+
+2012-10-29
+
+  * created install.os2
+  * updated qpdfview to contain a icon (thx Herwig)
+
+2012-10-24
+
+  * first public port
+
+

E:\trees\qpdfview\trunk

@@ +1 @@
+# define destdir
+PLUGIN_DESTDIR = lib
+
+# define the djvu part
+DJVU_PLUGIN_LIBS += -Le:/trees/djvulibre/trunk/libdjvu/.libs
+DJVU_PLUGIN_LIBS += djvulibre
+DJVU_PLUGIN_INCLUDEPATH += e:/trees/djvulibre/trunk
+DJVU_PLUGIN = qpdfdjvu
+DJVU_PLUGIN_NAME = $$DJVU_PLUGIN".dll"
+
+# define the poppler part
+PDF_PLUGIN_DEFINES += HAS_POPPLER_14 HAS_POPPLER_18 HAS_POPPLER_20 HAS_POPPLER_22 HAS_POPPLER_24
+PDF_PLUGIN_LIBS += -Le:/trees/poppler/trunk/qt4/src/.libs
+PDF_PLUGIN_LIBS += popplerqt4
+PDF_PLUGIN_INCLUDEPATH += e:/trees/poppler/trunk/qt4/src
+PDF_PLUGIN = qpdfpdf
+PDF_PLUGIN_NAME = $$PDF_PLUGIN".dll"
+
+# define the ps part
+PS_PLUGIN_LIBS += -Le:/trees/libspectre/trunk/libspectre/.libs -Le:/trees/ghostscript/trunk/gs8.71/bin
+PS_PLUGIN_LIBS += spectre gs
+PS_PLUGIN_INCLUDEPATH += e:/trees/libspectre/trunk
+PS_PLUGIN = qpdfps
+PS_PLUGIN_NAME = $$PS_PLUGIN".dll"
+
+# define the cups part
+CUPS_LIBS += cups
+
+# define the vendor part
+DEF_FILE_VENDOR = bww bitwise works GmbH
+DEF_FILE_VERSION = $$APPLICATION_VERSION
+DEF_FILE_DESCRIPTION = eCS (OS/2) port of qpdfview by Adam Reichold
+
+

synctex/synctex_parser_utils.c

@@ -57 +57 @@
 #define SYNCTEX_WINDOWS 1
 #endif
 
+#if defined(__OS2__)
+#define SYNCTEX_OS2 1
+#endif
+
 #ifdef _WIN32_WINNT_WINXP
 #define SYNCTEX_RECENT_WINDOWS 1
 #endif
@@ -121 +125 @@
                                 last_component = next+1;
                         }
                 }
-#       ifdef   SYNCTEX_WINDOWS
+#       if defined(SYNCTEX_WINDOWS) || defined (SYNCTEX_OS2)
                 /*  On Windows, the '\' is also a path separator. */
                 while((next = strstr(last_component,"\\"))){
                         last_component = next+1;
@@ -207 +211 @@
         if(!strlen(name)) {
                 return synctex_NO;
         }
-#       if SYNCTEX_WINDOWS
+#       if defined(SYNCTEX_WINDOWS) || defined(SYNCTEX_OS2)
         if(strlen(name)>2) {
                 return (name[1]==':' && SYNCTEX_IS_PATH_SEPARATOR(name[2]))?synctex_YES:synctex_NO;
         }

synctex/synctex_parser_utils.h

@@ -64 +64 @@
 #define FALSE 0
 #define TRUE !FALSE
 
-#       if _WIN32
+#       if defined(_WIN32) || defined(__OS2__)
 #       define SYNCTEX_CASE_SENSITIVE_PATH FALSE
 #               define SYNCTEX_IS_PATH_SEPARATOR(c) ('/' == c || '\\' == c)
 #       else
@@ -72 +72 @@
 #               define SYNCTEX_IS_PATH_SEPARATOR(c) ('/' == c)
 #       endif
     
-#       if _WIN32
+#       if defined(_WIN32) || defined(__OS2__)
 #               define SYNCTEX_IS_DOT(c) ('.' == c)
 #       else
 #               define SYNCTEX_IS_DOT(c) ('.' == c)